The CAPIOX RX Family of Hollow Fiber Oxygenators

Transcription

1 The CAPIOX RX Family of Hollow Fiber Oxygenators Neonates, children, minimized circuits and adults, one oxygenator family does it all. with TM

2 Superb gas exchange. Low pressure drop. Low prime volume. Now you can have all three with the CAPIOX RX family of oxygenators. CAPIOX RX5 Baby RX Oxygenator designed for neonates and infants CAPIOX RX Family of Hollow Fiber Oxygenators Oxygenator Balanced Performance Low priming volume, high gas exchange and low pressure drop are optimally balanced for superb performance. Hollow fibers manufactured exclusively by Terumo using a patented technology with total quality management from raw materials to finished product. Woven fiber bundle ensures consistent and high-performance gas exchange. Choice of blood outlet port configurations for easy access and increased circuit flexibility. Top-to-bottom blood flow path and air purge line provide excellent air removal capability. No DEHP used in PVC tubing. Hardshell Reservoir Full Featured Elongated shape provides a stable blood flow path and enhanced visibility at all levels from all angles. Rotating venous inlet improves set-up flexibility. No DEHP used in PVC tubing. Connecting mount increases flexibility in circuit set-up and oxygenator rotation. Funnel-shaped cardiotomy filter improves breakthrough and residual volumes. Maximum blood flow: 1.5 L/min Oxygenator priming volume: 43 ml Reservoir storage capacity: ml Choose the blood outlet port configuration that best suits your circuit. West outlet port Oxy inlet on right when outlet is facing away from user

3 CAPIOX Oxygenator designed for children, minimized circuits and small adults; available in two reservoir sizes MINIMIZED CIRCUITS With its low prime volume, high oxygen transfer capacity and excellent biocompatibility, the CAPIOX oxygenator is ideal for use in minimized perfusion circuits. Maximum blood flow: 4. L/min Oxygenator priming volume: 135 ml Reservoir storage capacity: 3 ml Maximum blood flow: 5. L/min Oxygenator priming volume: 135 ml Reservoir storage capacity: 4 ml East outlet port Oxy inlet on left when outlet is facing away from user TM X Coating biopassive suface coating reduces platelet adhesion and minimizes platelet activation. On non-coated surfaces, platelet adhesion increases, resulting in platelet activation and blood reaction.

4 CAPIOX RX25 Oxygenator designed for reduced prime volume in adult circuits. CAPIOX RX Family of Oxygenators, perfect balance for every patient Maximum blood flow: 7. L/min Oxygenator priming volume: 25 ml Reservoir storage capacity: 4 ml TOTM an alternative plasticizer Terumo Corporation is ever striving to develop new medical technologies with minimal burden to patients and the environment. Our efforts are closely linked to our corporate philosophy of contributing to society through health care by providing safe and trustworthy products. In line with this vision, Terumo provides an alternative plasticizer for the manufacturing of its products. TOTM (trioctyl trimellitate) offers outstanding physical properties, such as flexibility, to the material and low plasticizer elution.

5 Performance data CAPIOX RX5 Baby RX Hollow Fiber Oxygenator O2 Transfer Rate (ml/min.) O2 transfer rate (in vitro) V/Q = AAMI standard CO2 Transfer Rate (ml/min.) CO2 transfer rate (in vitro) V/Q = 2. V/Q = 1. AAMI standard V/Q =.5 Tbo Tbi Twi Tbi Performance Factor Heat exchange performance factor (in vitro) Pressure Drop (mmhg) Blood side pressure drop (in vitro) (kpa) Tbi = 3±1 C Twi = 4 C Water Flow Rate = 15L/min Ht = 35% CAPIOX Hollow Fiber Oxygenator O2 Transfer Rate (ml/min.) O2 transfer rate (in vitro) V/Q = CO2 Transfer Rate (ml/min.) CO2 transfer rate (in vitro) V/Q = 2. V/Q = 1. V/Q =.5 Tbo Tbi Twi Tbi Performance Factor Heat exchange performance factor (in vitro) Pressure Drop (mmhg) Blood side pressure drop (in vitro) (kpa) Tbi = 3±1 C Twi = 4 C Water Flow Rate = 15L/min Ht = 35% CAPIOX RX25 Hollow Fiber Oxygenator O2 Transfer Rate (ml/min.) O2 transfer rate (in vitro) V/Q = 1. CO2 Transfer Rate (ml/min.) CO2 transfer rate (in vitro) V/Q = 2. V/Q = 1. V/Q =.5 Tbo Tbi Twi Tbi Performance Factor Heat exchange performance factor (in vitro) Tbi = 3±1 C Twi = 4 C Water Flow Rate = 15L/min. Pressure Drop (mmhg) Blood side pressure drop (in vitro) Ht = 35% 2 (kpa) 1 8. CAPIOX RX Family of Hollow Fiber Oxygenators Holder systems CAPIOX RX5 Baby RX oxygenator CAPIOX and CAPIOX RX25 oxygenators Holder for RX5 oxygenator with hardshell reservoir, order no. XX*CXH5R Holder for RX5 oxygenator, order no. XX*CXH5 Holder for /25 oxygenator, order nos.: XX*CXH15 (Europe only) , (US only) , RX25 (US only Holder for /25 oxygenator with hardshell reservoir, order nos.: XX*CXH18R (Europe only) XX*XHO32, short arm (Europe only) 8184 (US and Europe) Holder for /25 oxygenator, order no.: XX*CXH18 (US and Europe)

6 The CAPIOX RX Family of Hollow Fiber Oxygenators Specifications Oxygenator Note: The oxygenator module of the oxygenator/hardshell reservoir system is rotatable and detachable. Materials Housing Fibers Heat exchanger RX5 Polycarbonate Microporous polypropylene Stainless steel R3 reservoir R4 reservoir RX25 Fibers Approx. surface area.5 m m m m 2 Heat exchanger Approx. surface area.35 m 2.14 m 2.14 m 2.2 m 2 Blood flow range L/min.5-4. L/min.5-5. L/min.5-7. L/min Ports Blood inlet port (from pump) 3/8 (9.5 mm) 3/8 (9.5 mm) Ports Blood outlet port 3/8 (9.5 mm) 3/8 (9.5 mm) Ports Cardioplegia port Luer port Ports Gas inlet port Ports Gas outlet port 5/16 (7.9 mm) Ports Water ports Maximum pressure Blood inlet Maximum pressure Water inlet Thermistor probe Sterilization method 1/2 (12.7 mm) Hansen quick connect fittings 1, mmhg (133 kpa) 2 kgf/cm 2 (196 kpa)(28.5 psi) Blood outlet port Ethylene oxide gas Hardshell reservoir Materials Housing Venous filter Cardiotomy filter Defoamer Polycarbonate Polyester screen type Polyester depth type Polyurethane foam RX5 R3 reservoir R4 reservoir RX25 Blood storage capacity 1, ml 3, ml 4, ml 4, ml Minimum operating volume 15 ml 7 ml 2 ml 2 ml Blood flow range L/min.5-4. L/min.5-5. L/min.5-7. L/min Max. cardiotomy blood flow 1.5 L/min 4. L/min 5. L/min 5. L/min Max. combined flow 1.5 L/min 4. L/min 5. L/min 7. L/min Ports Venous blood inlet (rotatable) > when 1/4 adaptor is attached/mounted Ports Blood outlet port (to pump) > when 1/4 adaptor is attached/mounted Ports Suction ports (rotatable) 3/8 (9.5 mm); 1/2 (12.7 mm) 1/2 (12.7 mm) 3/8 (9.5 mm); 3/8 (9.5 mm) 3/8 (9.5 mm) Five: 3/16-1/4 (4.8 mm mm) Six: Ports Vertical port (to CR filter) n/a 3/8 (9.5 mm) Ports Quick prime port Ports Vent port Ports Auxiliary port 1/4-3/8 (6.4 mm mm) Ports Non-filtered luer lock One One One One Ports Luer locks on venous inlet Two Two Two Two Ports Luer locks to cardiotomy filter Three Four Three Three Thermistor probe Sterilization method Maximum sustainable negati ve pressure in reservoir Venous blood inlet port Ethylene oxide gas 15 mmhg ( 2. kpa) Ordering information CATALOG NUMBER DESCRIPTION UNITS/CASE CATALOG NUMBER DESCRIPTION UNITS/CASE CAPIOX RX Family of Hollow Fiber Oxygenators CAPIOX RX5 Baby RX Oxygenator CX*RX5E...Hollow fiber oxygenator CX*RX5W...Hollow fiber oxygenator CX*RX5RE...Hollow fiber oxygenator with hardshell reservoir 2, CX*RX5RW...Hollow fiber oxygenator with hardshell reservoir 1, CAPIOX Oxygenator CX*E...Hollow fiber oxygenator CX*W...Hollow fiber oxygenator CX*RE3...Hollow fiber oxygenator with hardshell reservoir 2, CX*RW3...Hollow fiber oxygenator with hardshell reservoir 1, CX*RE4...Hollow fiber oxygenator with hardshell reservoir CX*RW4...Hollow fiber oxygenator with hardshell reservoir CAPIOX RX25 Oxygenator CX*RX25E...Hollow fiber oxygenator CX*RX25W...Hollow fiber oxygenator CX*RX25RE...Hollow fiber oxygenator with hardshell reservoir CX*RX25RW...Hollow fiber oxygenator with hardshell reservoir Holders for CAPIOX RX Oxygenators XX*CXH5R...Holder for RX5 oxygenator with hardshell reservoir...1 XX*CXH5...Holder for RX5 oxygenator...1 XX*CXH5AD...Adapter for SX holder for RX Holder for /25 oxygenator with hardshell reservoir (short arm) Holder for /25 oxygenator with hardshell reservoir (long arm) Holder for RX25 oxygenator (US only) Holder for oxygenator (US only)...1 XX*CXH18...Holder for /25 oxygenator...1 XX*CXH15...Holder for /25 oxygenator (Europe only)...1 XX*CXH18R...Holder for /25 oxygenator with hardshell reservoir (Europe only)...1 XX*XH32...Holder for /25 oxygenator with hardshell reservoir, short arm (Europe only)...1 Accessories for CAPIOX RX Oxygenators ME*CE61...Low-level alarm for SX/RX hardshell venous reservoir...1 XX*CE61P...Low-level sensor probe for SX/RX hardshell venous reservoir...1 CX*BP21...Blue thermistor wire...1 CX*BP22...Red thermistor wire Oxy inlet on right when outlet is facing away from user 2. Oxy inlet on left when outlet is facing away from user 3. Includes one 3/8 and two 1/4 adapters 4. Includes four 1/4 adapters Manufactured by Terumo Corporation, Tokyo, Japan For more information on this or other Terumo cardiovascular products, contact: TERUMO CARDIOVASCULAR SYSTEMS CORPORATION 62 Jackson Road Ann Arbor, Michigan USA phone fax toll free TERUMO CORPORATION 44-1, 2-chome Hatagaya, Shibuya-ku Tokyo Japan phone fax TERUMO EUROPE N.V. Authorized EC Representative Interleuvenlaan 4 B-31 Leuven Belgium phone fax TERUMO EUROPE N.V. Cardiovascular Division Hauptstrasse 87 D-6576 Eschborn Germany phone fax TERUMO LATIN AMERICA CORPORATION 875 NW 36th Street, Suite 6 Miami, Florida USA phone fax toll free Terumo and CAPIOX are registered trademarks of Terumo Corporation. X Coating and Baby RX are trademarks of Terumo Corporation. Printed in the USA 26 Terumo Cardiovascular Systems 81543