(1) Home Theatre System. Operating Instructions HT-SF1100 HT-SS Sony Corporation

Transcription

1 (1) Home Theatre System Operating Instructions HT-SF1100 HT-SS Sony Corporation

2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. Don t throw away batteries with general house waste; dispose of them correctly as chemical waste. For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. 2 GB

3 About This Manual The instructions in this manual are for model HT-SF1100 and HT-SS1100. In this manual, models of area code CEL is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, Models of area code CEL only. The HT-SF1100 consists of: Receiver STR-KS1100 Speaker system a) Front speakers SS-MSP2000 Center speaker SS-CNP2000 Surround speakers SS-SRP2000 Sub woofer SS-WP2000 The HT-SS1100 consists of: Receiver STR-KS1100 Speaker system a) Front speakers SS-MSP1100 Center speaker SS-CNP1100 Surround speakers SS-SRP1100 Sub woofer SS-WP1100 a) Be sure to use only the supplied speakers. This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-d symbol are trademarks of Dolby Laboratories. ** DTS and DTS Digital Surround are registered trademarks of DTS, Inc. This receiver incorporates High-Definition Multimedia Interface (HDMI TM ) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Note for the supplied remote (RM-AAU017) The VIDEO 3 button on the remote is not available for receiver operation. The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have the same or similar names as those on the remote. About area codes The area code of the receiver you purchased is shown on the lower portion of the rear panel (see the illustration below). SPEAKERS FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER Area code Any differences in operation, according to the area code, are clearly indicated in the text, for example, Models of area code AA only. 3 GB

4 Table of Contents Getting Started Description and location of parts...5 1: Installing speakers : Connecting speakers : Connecting the audio/video components : Connecting the antennas : Preparing the receiver and the remote : Calibrating the appropriate settings automatically (AUTO CALIBRATION) : Adjusting the speaker levels and balance (TEST TONE)...26 Playback Selecting a component...27 Listening/Watching a component...28 Amplifier Operations Navigating through menus...30 Adjusting the level (LEVEL menu)...33 Adjusting the tone (TONE menu)...34 Settings for the surround sound (SUR menu)...34 Settings for the tuner (TUNER menu)...35 Settings for the audio (AUDIO menu)...35 Settings for the system (SYSTEM menu)...36 Calibrating the appropriate settings automatically (A. CAL menu)...38 Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) Selecting a pre-programmed sound field Using only the front speakers and sub woofer (2CH STEREO) Resetting sound fields to the initial settings Tuner Operations Listening to FM/AM radio Presetting radio stations Using the Radio Data System (RDS) (Models of area code CEL, CEK only) Other Operations Enjoying the DIGITAL MEDIA PORT (DMPORT) Using the Sleep Timer Using the Remote Changing button assignments Additional Information Glossary Precautions Troubleshooting Specifications Index... Back cover 4 GB

5 Getting Started Description and location of parts Receiver Getting Started Front panel DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER MASTER VOLUME?/1 INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING AUTO CAL MIC q; Name A?/1 (on/standby) B Remote sensor C Input lamps D Display E MASTER VOLUME F AUTO CAL MIC jack Function Press to turn the receiver on or off (page 21, 28, 29, 43). Receives signals from remote commander. The lamp of the chosen input source lights up (page 27). The current status of the selected component or a list of selectable items appears here (page 6). Turn to adjust the volume level of all speakers at the same time (page 26, 27, 28, 29). Connects to the supplied optimizer microphone for the Auto Calibration function (page 23). Name G MUTING H SOUND FIELD +/ I PRESET TUNING +/ J INPUT SELECTOR Function Press to mute the sound (page 27). Press to select a sound field (page 38, 40, 42, 43). Press to select a preset station (page 46). Press to select the input source to playback (page 27, 28, 29, 44, 45, 46, 54). continued 5 GB

6 About the indicators on the display SLEEP LFE SW L C R SL S SR DIGITAL DTS HDMI PL OPT COAX D.RANGE MEMORY RDS ST MONO qf qd qs qa q; 9 8 Name A LFE B SLEEP C Playback channel indicators L R C SL SR S D ; DIGITAL E HDMI Function Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up when the sleep timer is activated (page 50). The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Example: Recording format (Front/ Surround): 3/2.1 Sound Field: A.F.D. AUTO SW L C R SL SR Lights up when receiver is decoding Dolby Digital signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections. Lights up when a playback component is connected to this receiver using a HDMI jack (page 18). Name F Preset station indicators G D.RANGE H Tuner indicators I MEMORY Function Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 45. Lights up when dynamic range compression is activated (page 31). Lights up when using the receiver to tune in radio stations (page 43), etc. Note RDS lights up for models of area code CEL, CEK only. Lights up when a memory function, such as Preset Memory (page 45), etc., is activated. J COAX Lights up when the DVD input is selected. K OPT Lights up when the VIDEO 2 input is selected. L ;PL(II) M DTS N SW ; PL lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. ; PLII lights up when the Pro Logic II Movie/Music decoder is activated. Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections. Lights up when the audio signal is output from the SUBWOOFER jack. 6 GB

7 Rear panel AM ANTENNA OPT IN SAT DIGITAL OPT IN VIDEO 2/BD HDMI DVD IN VIDEO 2/BD IN OUT COAX IN AUDIO IN DVD SA-CD/CD L R AUDIO IN TV L R SPEAKERS AUDIO IN FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER VIDEO 1 DMPORT Getting Started 4 A ANTENNA section FM ANTENNA jack AM ANTENNA terminals Connects to the FM wire antenna supplied with this receiver (page 20). Connects to the AM loop antenna supplied with this receiver (page 20). B DIGITAL INPUT/OUTPUT section OPTICAL IN jack COAXIAL IN jack Connects to a DVD player, etc. The COAX IN jack provides a better quality of loud sound (page 16). C SPEAKERS section D AUDIO INPUT section White (L) Red (R) AUDIO IN jack Connects to speakers (page 14). Connects to a Super Audio CD player, CD player, etc. (page 15, 16). HDMI IN/ OUT jack DMPORT jack Connects to a DVD player or a satellite tuner. An image and the sound are output to a TV or a projector (page 18). Connect to a DIGITAL MEDIA PORT adapter (page 48). 7 GB

8 Remote commander You can operate the receiver with the supplied remote. You can also use the remote to control the Sony audio/video components that the remote is assigned to operate (page 50). RM-AAU017 wa w; ql qk qj qh qg qf qd TV INPUT TV?/1 SLEEP DMPORT AV?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER 2CH A.F.D >10/ - CLEAR DISPLAY G D.TUNING 9 D.SKIP MEMORY DVD MENU 0/10 ENTER FM MODE RETURN/EXIT MENU TV CH PRESET TV CH + REPLAY ADVANCE PRESET +. < > TUNING m TV F f H X MOVIE?/1 MUSIC AMP MENU AUTO CAL TOOLS MUTING g < TV VOL MASTER VOL TUNING + M x q; qa qs Name Function A TV?/1 Press TV?/1 and TV (M) at (on/standby) the same time to turn the TV on or off. AV?/1 Press to turn on or off the Sony (on/standby) audio/video components that the remote is assigned to operate. If you press?/1 (B) at the same time, it will turn off the receiver and other components (SYSTEM STANDBY). Note The function of the AV?/1 switch changes automatically each time you press the input buttons (C). B?/1 Press to turn the receiver on or (on/standby) off. To turn off all components, press?/1 and AV?/1 (A) at the same time (SYSTEM STANDBY). C Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can change the button assignment following the steps in Changing button assignments on page 50. Button Assigned Sony component VIDEO 1 VCR (VTR mode 3) VIDEO 2 VCR (VTR mode 2) VIDEO 3 Not assigned DVD DVD player SAT Digital Satellite Receiver TV TV SA-CD/CD Super Audio CD/ CD player TUNER Built-in tuner DMPORT DIGITAL MEDIA PORT adapter 8 GB

9 Name Function Name Function D MOVIE MUSIC A.F.D. 2CH E AMP MENU F AUTO CAL G D.TUNING D.SKIP H DVD MENU FM MODE I ENTER MEMORY J MUTING K TV VOL + a) / MASTER VOL + a) / Press to select sound fields (MOVIE). Press to select sound fields (MUSIC). Press to select A.F.D. mode. Press to select 2CH STEREO mode. Press to display the menu of the receiver. Then, use V, v, B, b and (P) to perform menu operations. Press to activate the Auto Calibration function (page 23). Press to enter direct tuning mode. Press to skip a disc when using a multi-disc changer. Press to display the menu of the DVD player on the TV screen. Then, use V, v, B, b and (P) to perform menu operations. Press to select the FM monaural or stereo reception. Press to enter the value after selecting a channel, disc or track using the numeric buttons of the TV, VCR or satellite tuner. Press to store a station. Press to activate the muting function. Press MUTING and TV (M) at the same time to activate the TV s muting function. Press TV VOL +/ and TV (M) at the same time to adjust the TV volume level. Press to adjust the volume level of all speakers at the same time. L TV CH +/ Press TV CH +/ and TV (M) at the same time to select preset TV channels. PRESET +/ Press to select preset stations. preset channels of the VCR or satellite tuner../> b) Press to skip a track of the CD player, DVD player or Bluray disc player. REPLAY < / ADVANCE m/m b) TUNING +/ H a)b) X b) x b) M TV N MENU Press to replay the previous scene or fast forward the current scene of the VCR, DVD player or Blu-ray disc player. Press to search tracks in the forward/ reverse direction of the DVD player. start fast forward/rewind of the VCR, CD player or Bluray disc player. Press to scan a station. Press to start playback of the VCR, CD player, DVD player or Blu-ray disc player. Press to pause playback or recording of the VCR, CD player, DVD player or Bluray disc player. (Also starts recording with components in recording standby.) Press to stop playback of the VCR, CD player, DVD player or Blu-ray disc player. < Press TV and the button you want at the same time to activate the buttons with orange printing. Press to display the menu of the VCR, DVD player, satellite tuner or Blu-ray disc player on the TV screen. Press MENU and TV (M) at the same time to display the TV s menu. Then, use V, v, B, b and (P) to perform menu operations. Getting Started continued 9 GB

10 Name O RETURN/ EXIT O P V/v/B/b Q DISPLAY R TOOLS Function Press to return to the previous menu. exit the menu while the menu or on-screen guide of the VCR, DVD player, satellite tuner or Blu-ray disc player is displayed on the TV screen. Press RETURN/EXIT O and TV (M) at the same time to return to the previous menu or exit the TV s menu while the menu is displayed on the TV screen. After pressing AMP MENU (E), DVD MENU (H), or MENU (N), press V, v, B or b to select the settings. Then, press to enter the selection for DVD MENU or MENU. Press also to enter the selection of the receiver, VCR, satellite tuner, CD player, DVD player or Bluray disc player. Press to select information displayed on the TV screen of the VCR, satellite tuner, CD player, DVD player or Bluray disc player. Press DISPLAY and TV (M) at the same time to select TV information displayed on the TV screen. Press to display options applicable to the entire disc (e.g. disc protection), recorder (e.g. audio settings during recording), or multiple items on a list menu (e.g. erasing multiple titles). Press TOOLS and TV (M) at the same time to display options applicable to the TV. Name Function S >10/ Press to select x track numbers over 10 of the VCR, satellite tuner or CD player. channel numbers of the Digital CATV terminal. -/-- Press -/-- and TV (M) at the same time to select the channel entry mode, either one or two digits of the TV. CLEAR T Numeric buttons (number 5 a) ) U TV INPUT SLEEP Press to clear a mistake when you press the incorrect numeric button. Press to preset/tune to preset stations. select track numbers of the CD player, DVD player or Blu-ray disc player. Press 0/10 to select track number 10. select channel numbers of the VCR or satellite tuner. Press the numeric buttons and TV (M) at the same time to select the TV channels. Press TV INPUT and TV (M) at the same time to select the input signal (TV input or video input). Press to activate the Sleep Timer function and the duration which the receiver turns off automatically. a) The number 5, MASTER VOL +, TV VOL + and H buttons have tactile dots. Use the tactile dots as references when operating the receiver. b) This button is also available for DIGITAL MEDIA PORT adapter operation. For details on the function of the button, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter. Notes The VIDEO 3 button on the remote is not available for receiver operation. Some functions explained in this section may not work depending on the model. The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. 10 GB

11 1: Installing speakers This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). HT-SS1100 only Getting Started HT-SF1100 only AFront speaker (Left) BFront speaker (Right) CCenter speaker DSurround speaker (Left) ESurround speaker (Right) FSub woofer AFront speaker (Left) BFront speaker (Right) CCenter speaker DSurround speaker (Left) ESurround speaker (Right) FSub woofer Tip Since the sub woofer does not emit highly directional signals, you can place it wherever you want. 11 GB

12 Installing the speakers on a flat surface Before you install the speaker and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Example of HT-SS1100 front speaker HT-SF1100 only For greater flexibility in positioning the speakers, use the supplied speaker stand. For details, refer to supplied speaker stand installation guide. Installing the speakers on the wall You can install your speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below. more than 4 mm HT-SF1100 only You need to attach the supplied foot pads to the center speaker and sub woofer only. HT-SS1100 only You need to attach the supplied foot pads to all the speakers and sub woofer. Installing the speakers on the speaker stand HT-SS1100 only For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). Be sure to detach the screw from the speaker and use it when you install the speaker to the speaker stand. For details, refer to operating instructions supplied with the speaker stand. more than 25 mm Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm. 5 to 7 mm 4.5 mm 12 GB

13 3 Hang the speakers on the screws. Example of installing the speakers on the wall Hook on the back of the speaker 4.5 mm Getting Started Notes Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. Contact a screw shop or installer regarding the wall material or screws to be used. Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. For HT-SF1100, if you install the speakers on the wall, you do not need to attach the supplied speaker stand. 13 GB

14 2: Connecting speakers B A F A A SPEAKERS DVD IN VIDEO 2/BD IN OUT L L R AUDIO IN SA-CD/CD AUDIO IN TV R AUDIO IN VIDEO 1 DMPORT FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER A A A E D C A Speaker cord (supplied) a) AFront speaker (Left) BFront speaker (Right) CCenter speaker DSurround speaker (Left) ESurround speaker (Right) FSub woofer a) Use the long speaker cords to connect the surround speakers and the short speaker cords to connect the front and center speakers. Note Do not connect or disconnect the speaker cords to SPEAKERS terminals while the receiver is turned on. Note on speakers To connect the speakers correctly, be sure to check the type of speakers by referring to the speaker label* at the rear panel or bottom of the speakers. Character on speaker label L R SL SR Speaker type Front left Front right Surround left Surround right * The center speaker and sub woofer do not have the character on the speaker label. For details on the speaker type, see page GB

15 3: Connecting the audio/ video components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to Component to be connected below for the pages which describe how to connect the audio/video components. After hooking up all your components, proceed to 4: Connecting the antennas (page 20). Connecting audio components The following illustration shows how to connect audio components such as Super Audio CD player or CD player. Super Audio CD player/ CD player Audio signal A Getting Started Component to be connected To connect Audio components Super Audio CD player/ CD player Video components DVD player/dvd recorder Blu-ray disc player Satellite tuner/set-top box VCR TV See page 15 page 16 Components with HDMI jack page 18 AM ANTENNA OPT IN SAT DIGITAL OPT IN VIDEO 2/BD HDMI COAX IN DVD DVD IN L R AUDIO IN SA-CD/CD VIDEO 2/BD AUDIO IN TV L R A Audio cord (not supplied) 15 GB

16 Connecting video components The following illustration shows how to connect video components such as DVD player, DVD recorder, satellite tuner or VCR. If you connect a DVD recorder Be sure to change the factory setting of the DVD input button on the remote so that you can use the button to control your DVD recorder. For details, see Changing button assignments (page 50). Satellite tuner/set-top box Blu-ray disc player TV Audio signal Audio signal Audio signal A A B SPEAKERS AM HDMI DVD IN VIDEO 2/BD IN OUT DIGITAL L L R R ANTENNA OPT IN SAT OPT IN VIDEO 2/BD COAX IN DVD AUDIO IN SA-CD/CD AUDIO IN TV AUDIO IN VIDEO 1 DMPORT FRONT R FRONT L SUR R SUR L C B Audio signal Audio signal DVD player/dvd recorder VCR A Optical digital cord (not supplied) B Audio cord (not supplied) C Coaxial digital cord (supplied) 16 GB

17 Notes You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. As this receiver does not have analog audio input jack for DVD, connect your DVD player to the DIGITAL COAXIAL DVD IN jack on the receiver. To output sound from the front left/right speakers only, press 2CH. When connecting optical digital cords, insert the plugs straight in until they click into place. Do not bend or tie optical digital cords. Getting Started Tips All the digital audio jacks are compatible with 32 khz, 44.1 khz, 48 khz, and 96 khz sampling frequencies. To output the sound of the TV from the speakers connected to the receiver, be sure to: connect the audio output jacks of the TV to the TV AUDIO IN jacks of the receiver. turn off or mute the TV s volume. 17 GB

18 Connecting components with HDMI jacks HDMI is the abbreviated name for High- Definition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. DVD player Blu-ray disc player TV, projector, etc. Audio signal Audio/video signal Audio signal Audio/video signal Audio/video signal A B C B B SPEAKERS AM HDMI DVD IN VIDEO 2/BD IN OUT DIGITAL L L ANTENNA OPT IN SAT OPT IN VIDEO 2/BD COAX IN DVD R AUDIO IN SA-CD/CD AUDIO IN TV R AUDIO IN FRONT R FRONT L SUR R SUR L VIDEO 1 DMPORT A Coaxial digital cord (supplied) B HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. C Optical digital cord (not supplied) 18 GB

19 Notes on HDMI connections The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via the HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to connect the digital audio jacks on the playback component to the receiver. turn off or mute the TV s volume. This receiver may not be able to transfer video or audio signals with certain types of components. The multi/stereo area audio signals of a Super Audio CD are not output. Audio signals (sampling frequency, bit length, etc.) transmitted from a HDMI jack may be restricted by the connected component. If the image is poor or no sound is output from the component connected via the HDMI cable, check the setup of the connected component. Be sure to turn on the receiver, when video and audio signals of a playback component are being output to a TV through HDMI jacks of the receiver. Unless the power is on, neither video nor audio signals will be transmitted. For details on HDMI setup of the connected component, refer to operating instructions supplied with the connected component. Tip All the digital audio jacks are compatible with 32 khz, 44.1 khz, 48 khz, and 96 khz sampling frequencies. Getting Started Notes Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. When connecting optical digital cords, insert the plugs straight in until they click into place. Do not bend or tie optical digital cords. Be sure to change the factory setting of the VIDEO 2 input button on the remote so that you can use the button to control your blu-ray disc player. For details, see Changing button assignments (page 50). 19 GB

20 4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) AM loop antenna (supplied) AM DIGITAL HDMI DVD IN VIDEO 2/BD IN OUT L L SPEAKERS ANTENNA OPT IN SAT OPT IN COAX IN AUDIO IN VIDEO 2/BD DVD SA-CD/CD R AUDIO IN TV R AUDIO IN FRONT R FRONT L SUR R SUR L VIDEO 1 DMPORT * The shape of the connector varies depending on the area code of this receiver. Notes To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible. 20 GB

21 ?/1 DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING MASTER VOLUME AUTO CAL MIC 5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1,2 Getting Started To the wall outlet 1 Press?/1 to turn off the receiver. 2 Hold down?/1 for 5 seconds. INITIAL appears on the display. The following items are reset to their factory settings. All settings in the LEVEL, TONE, SUR, TUNER, AUDIO and SYSTEM menus. The sound field memorized for each input and preset station. All sound field parameters. All preset stations. MASTER VOLUME is set to VOL MIN. Input is set to DVD. 21 GB

22 Inserting batteries into the remote Insert two R6 (size-aa) batteries in the RM-AAU017 remote commander. Observe the correct polarity when installing batteries. Notes Do not leave the remote in an extremely hot or humid place. Do not use a new battery with old ones. Do not mix alkaline batteries and other kinds of batteries. Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When you replace the batteries, the remote buttons may be reset to their factory settings. If this happens, reassign the buttons again (page 50). Tip Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones. 6: Calibrating the appropriate settings automatically (AUTO CALIBRATION) This receiver is equipped with D.C.A.C. (Digital Cinema Auto Calibration) Technology which allows you to perform automatic calibration as follows: Check the connection between each speaker and the receiver. Adjust the speaker level. Measure the distance of each speaker to your listening position. You can also adjust the speaker levels and balance manually. For details, see 7: Adjusting the speaker levels and balance (TEST TONE) (page 26). Before you perform Auto Calibration Before you perform Auto Calibration, install and connect the speakers (page 11, 14). The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones to this jack. Doing so may damage the receiver and the microphone. During calibration, the sound that comes out of the speakers is very loud. Pay attention to the presence of children or to the effect on your neighborhood. Perform Auto Calibration in a quiet environment to avoid the effect of noise and to get a more accurate measurement. If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacles from the measurement area to avoid measurement error. 22 GB

23 ?/1 DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING MASTER VOLUME AUTO CAL MIC Note If the Muting function is on when we perform Auto Calibration, it will turn off automatically. Example: HT-SS1100 Optimizer microphone Performing Auto Calibration TV INPUT TV?/1 SLEEP DMPORT AV?/1?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER?/1 switch Input buttons Getting Started 2CH A.F.D. MOVIE MUSIC >10/ - CLEAR DISPLAY G RETURN/EXIT D.TUNING 9 D.SKIP MEMORY DVD MENU 0/10 ENTER FM MODE F f TOOLS MUTING TV VOL MASTER VOL g MENU AMP MENU AUTO CAL AMP MENU AUTO CAL MUTING MASTER VOL +/ 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack on the front panel. 2 Set up the optimizer microphone. Place the optimizer microphone at your listening position.you can also use a stool or tripod so that the optimizer microphone remains at the same height as your ears. Tips Be sure to remove any obstacles in the path between the optimizer microphone and the speakers. When you face the speaker towards the optimizer microphone, you will get a more accurate measurement. Press AMP MENU, then press AUTO CAL. The following appears on the display. A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] The measurement process will take a few minutes to complete. The table below shows the display when measurement starts. Measurement for Environment noise level Speaker connection Speaker level Speaker distance Display NOISE.CHK MEASURE and SP DET. appears alternately* MEASURE and GAIN appears alternately* MEASURE and DISTANCE appears alternately* * The corresponding speaker indicator lights up in the display during measurement. continued 23 GB

24 When measurement ends, COMPLETE appears on the display and the settings are registered. After you have finished Disconnect the optimizer microphone from the receiver. Note Auto Calibration cannot detect the sub woofer. Therefore, all sub woofer settings will be maintained. Tips When Auto Calibration starts: Stand some distance from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement. Avoid making noise to get a more accurate measurement. The Auto Calibration function will be canceled when you do the following during the measurement process: Press?/1 or MUTING. Press input buttons on the remote or INPUT SELECTOR on the receiver. Change the volume level. Press AUTO CAL again. Error and warning codes Error codes When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows: Error code t blank display t (error code t blank display) a) t PUSH t blank display t ENTER a) Appears when there are more than one error code. To rectify the error 1 Record down the error code. 2 Press. 3 Press?/1 to turn off the receiver. 4 Rectify the error. For details, see Error code and remedies below. 5 Turn on the receiver and perform Auto Calibration again (page 23). Error code and remedies Error code ERROR 10 ERROR 11 ERROR 12 ERROR 20 ERROR 21 Explanation The environment is too noisy. The speakers are placed too near the optimizer microphone. None of the speakers are detected. Front speakers are not detected or only one front speaker is detected. Remedies Make sure the environment is quiet during Auto Calibration. Place your speakers further away from the optimizer microphone. Make sure that the optimizer microphone is connected properly and perform Auto Calibration. Check the front speaker connection. Only one surround speaker is detected. Check the surround speaker connection. 24 GB

25 Warning codes During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows: Warning code t blank display t (warning code t blank display) b) t PUSH t blank display t ENTER b) Appears when there are more than one warning code. You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually. To change the settings manually 1 Record down the warning code. 2 Press. 3 Press?/1 to turn off the receiver. 4 Follow the solution provided in the Warning codes and solutions below. 5 Turn on the receiver and perform Auto Calibration again (page 23). Warning codes and solutions Warning Explanation code WARN. 40 The environment is noisy. WARN. 50 The center speaker is not connected. WARN. 51 The surround speakers are not connected. WARN. 60 The front speaker balance is out of range. WARN. 62 The center speaker level is out of range. Solution Make sure the environment is quiet during Auto Calibration. Be sure to connect the center speaker. Be sure to connect the surround speakers. Reposition your front speakers. c) Reposition your center speaker. d) WARN. 63 The surround left Reposition your speaker level is out surround left of range. speaker. e) WARN. 64 The surround right Reposition your speaker level is out surround right of range. speaker. f) WARN. 70 The front speaker distance is out of range. WARN. 72 The center speaker distance is out of range. Reposition your front speakers. c) Reposition your center speaker. d) WARN. 73 The surround left Reposition your speaker distance is surround left out of range. speaker. e) WARN. 74 The surround right speaker distance is out of range. Reposition your surround right speaker. f) Getting Started c) For details, refer Front speaker distance (page 36). d) For details, refer Center speaker distance (page 36). e) For details, refer Surround left speaker distance (page 37). f) For details, refer Surround right speaker distance (page 37). 25 GB

26 7: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz CH A.F.D >10/ - CLEAR DISPLAY G MOVIE MUSIC AMP MENU AUTO CAL D.TUNING 9 D.SKIP MEMORY DVD MENU 0/10 ENTER FM MODE F TOOLS MUTING TV VOL MASTER VOL g f RETURN/EXIT MENU TV CH PRESET TV CH + REPLAY ADVANCE PRESET +. < > < 1 MASTER VOL +/ 5 Press V/v repeatedly to select T. TONE Y. The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Sub woofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see Adjusting the level (LEVEL menu) (page 33). Tips To adjust the level of all speakers at the same time, press MASTER VOL +/. You can also use MASTER VOLUME on the receiver. The adjusted value are shown on the display during adjustment. To turn off the test tone Repeat steps 1 to 5 above. Then, select T. TONE N in step 5. 1 Press AMP MENU. 1-LEVEL appears on the display. 2 Press or b to enter the menu. 3 Press V/v repeatedly to select T. TONE. 4 Press or b to enter the parameter. 26 GB

27 Playback Selecting a component TV INPUT TV?/1 SLEEP DMPORT AV?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER 2CH A.F.D >10/ - CLEAR DISPLAY G MOVIE MUSIC AMP MENU AUTO CAL D.TUNING 9 D.SKIP MEMORY DVD MENU 0/10 ENTER FM MODE F f TOOLS MUTING TV VOL MASTER VOL g RETURN/EXIT MENU TV CH PRESET TV CH + REPLAY ADVANCE PRESET +. < > 1 Press the input button to select a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. <?/1 1 MUTING 3 Selected input [Display] DMPORT [DMPORT] VIDEO 1 [VIDEO 1] VIDEO 2 [VIDEO 2/BD] DVD [DVD] SAT [SAT] TV [TV] SA-CD/CD [SA-CD/CD] TUNER [FM or AM band] Components that can be played back DIGITAL MEDIA PORT adapter connected to DMPORT jack VCR, etc., connected to the VIDEO 1 jack Blu-ray disc player, etc., connected to the VIDEO 2/BD jack DVD player, etc., connected to DVD jack Satellite tuner, set-top box, etc., connected to SAT jack TV, etc., connected to TV jack Super Audio CD/CD player, etc., connected to the SA-CD/CD jack Built-in radio tuner 2 Turn on the component and start playback. 3 Press MASTER VOL +/ to adjust the volume. You can also use MASTER VOLUME on the receiver. To mute the sound Press MUTING. The muting function will be canceled when you do the following. Press MUTING again. Increase the volume. Turn off the receiver. Playback To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. 27 GB

28 ?/1 INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING Listening/Watching a component Listening to a Super Audio CD/CD TV INPUT TV?/1 SLEEP DMPORT AV?/1?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER 2CH A.F.D. MOVIE MUSIC AMP MENU AUTO CAL 2 3 DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER 5 MASTER VOLUME D.TUNING D.SKIP >10/ MEMORY DVD MENU - 0/10 ENTER CLEAR FM MODE AUTO CAL MIC DISPLAY F G f RETURN/EXIT TV CH PRESET REPLAY. < TOOLS MUTING TV VOL MASTER VOL g MENU TV CH + ADVANCE PRESET + > < 5 3 TUNING m TV H X TUNING + M x Notes The operation is described for a Sony Super Audio CD player. Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tips You can select the sound field to suit the music. Refer to page 40 for details. Recommended sound fields: Classical: HALL Jazz: JAZZ Live concert: CONCERT You can listen to the sound that was recorded in the 2 channel format from all speakers (multi channel). Refer to page 38 for details. 1 Turn on the Super Audio CD player/cd player, then place the disc on the tray. 2 Turn on the receiver. 3 Press SA-CD/CD. You can also use INPUT SELECTOR on the receiver to select SA-CD/CD. 4 Playback the disc. 5 Adjust to a suitable volume. 6 After you have finished listening to the Super Audio CD/CD, eject the disc and turn off the receiver and Super Audio CD player/ CD player. 28 GB

29 ?/1 INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING Watching a DVD TV INPUT TV?/1 SLEEP DMPORT AV?/1?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER 2CH A.F.D. AMP MENU AUTO CAL D.TUNING D.SKIP >10/ MEMORY DVD MENU - 0/10 ENTER CLEAR FM MODE DISPLAY G F f RETURN/EXIT TV CH PRESET REPLAY. < MOVIE TOOLS g MENU ADVANCE < MUSIC MUTING TV VOL MASTER VOL TV CH + PRESET + > DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER 3 7 MASTER VOLUME AUTO CAL MIC Playback TUNING TUNING + m H M TV X x Notes Refer to the operating instructions supplied with the TV and DVD player. Check the following if you cannot listen to multi channel sound. Be sure this receiver is connected to the DVD player via a digital connection. Be sure the digital audio output of the DVD player is set up properly. Tips Select the audio format of the disc to be played, if necessary. You can select the sound field to suit the movie/music. Refer to page 40 for details. Recommended sound fields: Movie: C.ST.EX Music: CONCERT 1 Turn on the TV and DVD player. 2 Turn on the receiver. 3 Press DVD. You can also use INPUT SELECTOR on this receiver to select DVD. 4 Switch the input of the TV so that an image of the DVD is displayed. If no image is displayed on the TV screen, make sure that the video output of the DVD player is connected to the TV. 5 Set up the DVD player. Refer to Quick Setup Guide supplied with the receiver. 6 Playback the disc. 7 Adjust to a suitable volume. 8 After you have finished watching the DVD, eject the disc and turn off the receiver, TV and DVD player. 29 GB

30 Amplifier Operations Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver CH A.F.D >10/ - CLEAR DISPLAY G MOVIE MUSIC AMP MENU AUTO CAL D.TUNING 9 D.SKIP MEMORY DVD MENU 0/10 ENTER FM MODE F TOOLS MUTING TV VOL MASTER VOL g f RETURN/EXIT MENU TV CH PRESET TV CH + REPLAY ADVANCE PRESET +. < > < 1 To return to the previous display Press B. To exit the menu Press AMP MENU. Note Some parameters and settings may appear dimmed on the display. This means that they are either unavailable or fixed and unchangeable. 1 Press AMP MENU. 1-LEVEL appears on the display. 2 Press V/v repeatedly to select the menu you want. 3 Press or b to enter the menu. 4 Press V/v repeatedly to select the parameter you want to adjust. 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select the setting you want. The setting is entered automatically. 30 GB

31 Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 30. Menu [Display] LEVEL (33) [1-LEVEL] Parameters [Display] Test tone a) [T. TONE] Front speaker balance a) [FRT BAL] Center speaker level [CNT LVL] Surround left speaker level [SL LVL] Surround right speaker level [SR LVL] Settings Initial setting T. TONE Y, T. TONE N T. TONE N BAL. L +1 to BAL. L +8, BALANCE, BAL. R +1 to BAL. R +8 CNT 10 db to CNT +10 db (1 db step) SUR L 10 db to SUR L +10 db (1 db step) SUR R 10 db to SUR R +10 db (1 db step) BALANCE CNT 0 db SUR L 0 db SUR R 0 db Amplifier Operations Sub woofer level [SW LVL] Dynamic range compressor a) [D. RANGE] SW 10 db to SW +10 db (1 db step) COMP. OFF, COMP. STD, COMP. MAX SW 0 db COMP. OFF TONE (34) [2-TONE] Front speaker bass level [BASS LVL] BASS 6 db to BASS +6 db (1 db step) BASS 0 db SUR (34) [3-SUR] TUNER (35) [4-TUNER] Front speaker treble level [TRE LVL] Sound field selection a) [S.F. SELCT] Effect level a)b) [EFFECT] FM station receiving mode a) [FM MODE] TRE 6 db to TRE +6 db (1 db step) 2CH ST., A.F.D. AUTO, DOLBY PL, PLII MV, PLII MS, MULTI ST., C.ST.EX A, C.ST.EX B, C.ST.EX C, PORTABLE, HALL, JAZZ, CONCERT EFCT. MIN, EFCT. STD, EFCT. MAX FM AUTO, FM MONO TRE 0 db A.F.D. AUTO EFCT. STD FM AUTO AUDIO (35) [5-AUDIO] Digital audio input decoding priority a) [DEC. PRI.] DEC. AUTO, DEC. PCM DEC. AUTO for: VIDEO 2, SAT; DEC. PCM for: DVD Digital broadcast language selection a) [DUAL] DUAL M/S, DUAL M, DUAL S, DUAL M+S DUAL M Synchronizes audio with video output a) [A.V. SYNC.] A.V.SYNC. Y, A.V.SYNC. N A.V.SYNC. N continued 31 GB

32 Menu [Display] SYSTEM (36) [6-SYSTEM] A. CAL (38) [7 - A. CAL] Parameters [Display] Front speaker distance a) [FRT DIST.] Center speaker distance a) [CNT DIST.] Surround left speaker distance a) [SL DIST.] Surround right speaker distance a) [SR DIST.] Surround speaker placement a) [SUR PL.] Auto calibration a) [AUTO CAL] Settings DIST. 1.0 m to DIST. 7.0 m (0.1 m step) DIST. xx m between front speaker distance and 1.5 m (0.1 m step) DIST. xx m between front speaker distance and 4.5 m (0.1 m step) DIST. xx m between front speaker distance and 4.5 m (0.1 m step) PL. LOW, PL. HIGH A.CAL YES, A.CAL NO Initial setting DIST. 3.0 m DIST. 3.0 m DIST. 3.0 m DIST. 3.0 m PL. LOW A.CAL NO a) For details, refer to the page in the parentheses. b) The surround effect is not available for PORTABLE sound field. 32 GB

33 Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select 1-LEVEL in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31). LEVEL menu parameters x T. TONE (Test tone) Lets you adjust the speaker levels and balance while listening to the test tone from your listening position. For details, see 7: Adjusting the speaker levels and balance (TEST TONE) (page 26). x FRT BAL (Front speaker balance) Lets you adjust the balance between front left and right speakers. x CNT LVL (Center speaker level) x D. RANGE (Dynamic range compressor) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. COMP. OFF The dynamic range is not compressed. COMP. STD The dynamic range is compressed as intended by the recording engineer. COMP. MAX The dynamic range is compressed dramatically. Tip Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. COMP. STD is the standard setting, but it only enacts light compression. Therefore, we recommend using the COMP. MAX setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. Amplifier Operations x SL LVL (Surround left speaker level) x SR LVL (Surround right speaker level) x SW LVL (Sub woofer level) 33 GB

34 Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. Select 2-TONE in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31). TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select 3-SUR in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31). SUR menu parameters x S.F. SELCT (Sound field selection) Lets you select the sound field you want. For details, see Enjoying Surround Sound (page 38). Note The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select HALL for the SA-CD/CD input, then change to a different input and then return to SA-CD/CD, HALL will automatically be applied again. x EFFECT (Effect level) Lets you adjust the presence of the surround effect for sound fields selected with the MOVIE or MUSIC button. However, the surround effect is not available for PORTABLE sound field. EFCT. MIN The surround effect is minimum. EFCT. STD The surround effect is standard. EFCT. MAX The surround effect is maximum. 34 GB

35 Settings for the tuner (TUNER menu) Settings for the audio (AUDIO menu) You can use the TUNER menu to set the FM station receiving mode. Select 4-TUNER in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31). TUNER menu parameters x FM MODE (FM station receiving mode) FM AUTO This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. FM MONO This receiver will decode the signal as mono signal regardless of the broadcast signal. You can use the AUDIO menu to make settings for the audio to suit your preference. Select 5-AUDIO in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31). AUDIO menu parameters x DEC. PRI. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. DEC. PCM PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound depending on the format. In this case, set to DEC. AUTO. Note When set to DEC. AUTO and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to DEC. PCM. Amplifier Operations continued 35 GB

36 x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. DUAL M (Main) Sound of the main language will be output. DUAL S (Sub) Sound of the sub language will be output. DUAL M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. x A.V. SYNC. (Synchronizes audio with video output) A.V.SYNC. Y (Yes) (Delay time: 68 ms) The audio output is delayed so that the time gap between the audio output and visual display is minimized. A.V.SYNC. N (No) (Delay time: 0 ms) The audio output is not delayed. Notes This parameter is useful when you use a large LCD or plasma monitor or a projector. This parameter is valid only when you use a sound field selected with the 2CH or A.F.D. buttons. This parameter is not valid when PCM 96 khz or DTS 2048 signals are input. Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the distance of the speakers connected to this system. Select 6-SYSTEM in the amplifier menus. For details on adjusting the parameters, see Navigating through menus (page 30) and Overview of the menus (page 31) SYSTEM menu parameters x FRT DIST. (Front speakers distance) Lets you set the distance from your listening position to the front speakers (A). If both front speakers are not placed an equal distance from your listening position, set the distance as the average distance between the front speakers. C B A A D x CNT DIST. (Center speaker distance) Lets you set the distance from your listening position to the center speaker. Center speaker distance should be set from a distance equal to the front speaker distance (A) to a distance 1.5 meters closer to your listening position (B). 36 GB