(1) Home Theatre System. Operating Instructions HT-DDW Sony Corporation

Transcription

1 (1) Home Theatre System Operating Instructions HT-DDW Sony Corporation

2 WARNG To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Note on power cord plug shapes (For customers in Saudi Arabia only) For AC 220 V wall sockets 1 Make the appropriate voltage setting on the system (only for models with a voltage selector). 2 Make sure that the 13 A 3-pin plug (Type BF) is securely attached to the power cord. (The 13 A 3-pin plug is attached when shipped from the factory). Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. Excessive sound pressure from earphones and headphones can cause hearing loss. For AC 127 V wall sockets 1 Make the appropriate voltage setting on the system (only for models with a voltage selector). 2 Remove the 13 A 3-pin plug using a screwdriver. For models of area code E51, EA, AR and TH1 only This symbol is intended to alert the user to the presence of the Hot Surface that may be hot if it is touched during the normal operation. 3 Attach the supplied parallel blade plug (Type A). 2 GB

3 FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 R L L R About This Manual The instructions in this manual are for model HT-DDW5500. In this manual, models of area code SP is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, Models of area code MX only. The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have the same or similar names as those on the remote. The HT-DDW5500 consists of: Receiver STR-KM5500 Power amplifier TA-KMSW500 Speaker system Front speaker SS-MSP7500 Center speaker SS-CNP7500 Surround/Surround back speaker SS-SRP7500 Subwoofer SS-WP7500 This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double- D symbol are trademarks of Dolby Laboratories. ** Manufactured under license under U.S. Patent # s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks and the DTS logos, Symbol and DTS 96/24 are trademarks of DTS, Inc DTS, Inc. All Rights Reserved. This receiver incorporates High-Definition Multimedia Interface (HDMI TM ) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. About area codes The area code of the receiver you purchased is shown on the lower right portion of the rear panel (see the illustration below). D BACK CENTER SURROUND FRONT SPEAKERS Area code Any differences in operation, according to the area code, are clearly indicated in the text, for example, Models of area code AA only. 3 GB

4 Table of Contents Description and location of parts...5 Getting Started 1: Installing the speakers : Connecting the speakers and subwoofers : Connecting the TV a: Connecting the audio components b: Connecting the video components : Connecting the antennas : Preparing the receiver and the remote : Calibrating the appropriate settings automatically (AUTO CALIBRATION) : Adjusting the speaker levels and balance (TEST TONE)...34 Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) Selecting a pre-programmed sound field Using only the front speakers and subwoofers (2CH STEREO) Enjoying the surround effect at low volume levels (NIGHT MODE) Resetting sound fields to the initial settings Tuner Operations Listening to FM/AM radio Presetting radio stations Playback Selecting a component...35 Listening/Watching a component...37 Amplifier Operations Navigating through menus...39 Adjusting the level (LEVEL menu)...42 Adjusting the tone (TONE menu)...43 Settings for the surround sound (SUR menu)...43 Settings for the tuner (TUNER menu)...45 Settings for the audio ( menu)...45 Settings for the video ( menu)...46 Settings for the system (SYSTEM menu)...47 Calibrating the appropriate settings automatically (A. CAL menu)...49 Other Operations Switching between digital and analog audio (PUT MODE) Enjoying the DIGITAL MEDIA PORT (DMPORT) Changing the display Using the Sleep Timer Recording using the receiver Using the Remote Changing button assignments Additional Information Glossary Precautions Troubleshooting Specifications Index GB

5 ON OFF Description and location of parts Front panel Receiver ?/1 PUT SELECTOR MASTER VOLUME NIGHT MODE A.F.D. MOVIE MUSIC GAME MULTI STEREO PHONES 2 AUTO CAL MIC L R Power amplifier qa qs VOLUME ILLUMATION M qd continued 5 GB

6 Name A?/1 (on/standby) B PUT SELECTOR C Display D Remote sensor E MASTER VOLUME Function Press to turn the receiver on or off (page 30, 37, 38, 55, 64). Turn to select the input source to play back (page 35, 37, 38, 61, 63). The current status of the selected component or a list of selectable items appears here (page 7). Receives signals from remote commander. Turn to adjust the volume level of all speakers at the same time (page 35, 36, 37, 38). F 2 jacks Connect to a portable audio/video component such as a camcorder or video game (page 26, 35). G AUTO CAL MIC jack H A.F.D. MOVIE MUSIC GAME MULTI STEREO MULTI STEREO lamp I NIGHT MODE NIGHT MODE lamp J PHONES jack K SUBWOOFER VOLUME Connects to the supplied optimizer microphone for the Auto Calibration function (page 31). Press to select a sound field (page 50). Lights up when multi stereo sound field is activated. Press to enjoy sound effects for watching movie at night (page 41). Lights up when NIGHT MODE is activated. Connects to headphones (page 69). Turn to adjust the volume level of the subwoofers. Name L ILLUMATION M Illumination indicator Function ON The illumination is on (initial setting). OFF The illumination is off. Lights up to indicate the subwoofer output level. 6 GB

7 About the indicators on the display SW L SL LFE MEM D.RANGE SLEEP FM AM ST HDMI COAX OPT C S SB R SR D EX DTS -ES 96/24 NEO:6 PL IIx qa Name A SW B LFE C D.RANGE D SLEEP E Input indicators HDMI COAX OPT Function Lights up when the audio signal is output from the SUBWOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up when dynamic range compression is activated (page 42). Lights up when the sleep timer is activated. Light up to indicate the current input. The receiver recognizes a component connected via an HDMI jack. Lights up when DVD input is selected if PUT MODE is set to AUTO and the source signal is a digital signal being input through the COAXIAL jack. Lights up when BD input is selected. However, NO PUT appears on the display if no digital signal is input through the OPTICAL jack. OPT also lights up when SAT input is selected if PUT MODE is set to AUTO and the source signal is a digital signal being input through the OPTICAL jack. Name G Dolby Pro Logic indicators PL PLII PLIIx Function Lights up one of the respective indicators when the receiver applies Dolby Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. Dolby Pro Logic Dolby Pro Logic II Dolby Pro Logic IIx Note Dolby Pro Logic IIx decoding does not function for DTS format signals or for signals with a sampling frequency of more than 48 khz. F NEO:6 Lights up when DTS Neo:6 Cinema/Music decoder is activated. continued 7 GB

8 Name H DTS(-ES) indicators DTS DTS-ES DTS 96/24 I Dolby Digital Surround indicators D D EX J Tuning indicators Function Light up when DTS or DTS-ES signals are input. Lights up when the receiver is decoding DTS signals. Lights up when the receiver is decoding DTS-ES signals. Lights up when the receiver is decoding DTS 96/24 (96 khz/ 24 bit) signals. Note When playing a DTS format disc, be sure that you have made digital connections and that PUT MODE is not set to ANALOG (page 59). Lights up one of the respective indicators when the receiver is decoding the corresponding Dolby Digital format signals. Dolby Digital Dolby Digital Surround EX Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that PUT MODE is not set to ANALOG. Lights up when the receiver tunes in radio stations, etc. Name K Playback channel indicators L R C SL SR S SB Function The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Surround back (the surround back components obtained by 6.1 channel decoding) Example: Recording format (Front/ Surround): 3/2.1 Sound Field: A.F.D. AUTO SW LFE L C R SL SR MEM FM AM ST A memory function, such as Preset Memory (page 57), etc., is activated. FM band is selected. AM band is selected. Stereo broadcast. 8 GB

9 CB CR Rear panel Receiver CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL PR/ SAT DVD BD MONITOR COMPONENT MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L FRONT L R DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS Power amplifier SUBWOOFER ONLY FOR SS-WP7500 SUBWOOFER SUBWOOFER SYSTEM CONTROL ONLY FOR STR-KM5500/7500/8500 SPEAKERS A DIGITAL PUT/PUT section OPTICAL jacks COAXIAL jack HDMI / * jacks Connects to a DVD player, etc. The COAXIAL jack provides a better sound quality (page 24, 25). Connects to a DVD player, etc. The image and the sound are output to a TV (page 22). B ANTENNA section FM ANTENNA jack AM ANTENNA terminals Connects to the supplied FM wire antenna (page 28). Connects to the supplied AM loop antenna (page 28). continued 9 GB

10 C / PUT/PUT section / White (L) jacks Red (R) Yellow / * jacks Connects to a VCR, DVD player, etc. (page 19, 24, 25, 26). D SYSTEM CONTROL PUT/PUT section SYSTEM CONTROL DC5V 50mA MAX SYSTEM CONTROL SYSTEM CONTROL jack Connects to the power amplifier (page 18). SYSTEM Connects to the CONTROL receiver (page 18). jack G COMPONENT PUT/ PUT section Green (Y) Blue (PB/CB) Red (PR/CR) H DMPORT Y, PB/CB, PR/CR / * jacks DMPORT jack Connects to a DVD player, TV, satellite tuner, etc. You can enjoy high quality image (page 19, 24, 25). Connects to a DIGITAL MEDIA PORT adapter (page 60). *You can watch the selected input image when you connect the HDMI or MONITOR jack to a TV (page 19). E SPEAKERS section Connects to the supplied speakers (page 16). F PUT/PUT section / White (L) jacks Red (R) Connects to a Super Audio CD player, etc. (page 20). Black Black jack jack Connects to the power amplifier (page 18). Connects to the receiver. 10 GB

11 Remote commander You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. For details, see Changing button assignments (page 64). RM-AAU027 wa w; ql qk qj qh qg qf TV PUT SLEEP DMPORT SYSTEM STANDBY 1 2 BD DVD SAT TV SA-CD/CD TUNER 2CH A.F.D >10/ -/-- CLEAR DISPLAY O D.TUNG 9 D.SKIP MEMORY AMP MENU 0/10 ENTER RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET +. < > TUNG m TV TV?/1 AV?/1 H X MOVIE TOOLS/ OPTIONS <?/1 MUSIC DVD/BD MENU AUTO CAL MUTG TV VOL MASTER VOL TUNG + M FM MODE x q; qa qs qd Name Function A TV?/1 Press TV?/1 and TV (N) at (on/standby) the same time to turn the TV on or off. AV?/1 Press to turn on or off the Sony (on/standby) audio/video components that the remote is assigned to operate. If you press?/1 (B) at the same time, it will turn off the receiver and other components (SYSTEM STANDBY). Note The function of the AV?/1 switch changes automatically each time you press the input buttons (C). B?/1 Press to turn the receiver on or (on/standby) off. To turn off all components, press?/1 and AV?/1 (A) at the same time (SYSTEM STANDBY). C Input buttons D 2CH A.F.D. MOVIE MUSIC E DVD/BD MENU F AUTO CAL G D.TUNG D.SKIP Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components. You can change the button assignments following the steps in Changing button assignments on page 64. Press to select a sound field. Press to display the menu of the DVD or Blu-ray disc on the TV screen. Then, use V, v, B, b and (P) to perform menu operations. Press to activate the Auto Calibration function (page 32). Press to enter direct tuning mode. Press to skip a disc when using a multi-disc changer. continued 11 GB

12 Name H AMP MENU I ENTER Function Press to display the menu of the receiver. Then, use V, v, B, b and (P) to perform menu operations. Press to enter the value after selecting a channel, disc or track using the numeric buttons of the TV, VCR or satellite tuner. Name X b) x b) Function Press to pause playback or recording of the VCR, CD player, DVD player or Bluray disc player. (Also starts recording with components in recording standby.) Press to stop playback of the VCR, CD player, DVD player or Blu-ray disc player. MEMORY J MUTG K TV VOL + a) / MASTER VOL + a) / L MENU/HOME M./> b) REPLAY < / ADVANCE m/m b) H a)b) < Press to store a station. Press to turn off the sound temporarily. Press MUTG again to restore the sound. Press MUTG and TV (N) at the same time to activate the TV s muting function. Press TV VOL +/ and TV (N) at the same time to adjust the TV volume level. Press to adjust the volume level of all speakers at the same time. Press to display the menu of the VCR, DVD player, satellite tuner or Blu-ray disc player on the TV screen. Press MENU/HOME and TV (N) at the same time to display the TV s menu. Then, use V, v, B, b and (P) to perform menu operations. Press to skip a track of the CD player, DVD player or Bluray disc player. Press to replay the previous scene or fast forward the current scene of the VCR, DVD player or Blu-ray disc player. Press to search tracks in the forward/ reverse direction of the DVD player. start fast forward/rewind of the VCR, CD player or Blu-ray disc player. Press to start playback of the VCR, CD player, DVD player or Blu-ray disc player. TV CH +/ PRESET +/ TUNG +/ FM MODE N TV O RETURN/ EXIT O P V/v/B/b Press TV CH +/ and TV (N) at the same time to select preset TV channels. Press to select preset stations. preset channels of the VCR or satellite tuner. Press to scan a station. Press to select the FM monaural or stereo reception. Press TV and the button with orange printing at the same time to enable the TV operation. Press to return to the previous menu. exit the menu while the menu or on-screen guide of the VCR, DVD player, satellite tuner or Blu-ray disc player is displayed on the TV screen. Press RETURN/EXIT O and TV (N) at the same time to return to the previous menu or exit the TV s menu while the menu is displayed on the TV screen. After pressing DVD/BD MENU (E), AMP MENU (H) or MENU/HOME (L), press V, v, B or b to select the settings. Then, press to enter the selection if you have pressed DVD/BD MENU or MENU/HOME previously. Press also to enter the selection of the receiver, VCR, satellite tuner, CD player, DVD player or Bluray disc player. 12 GB

13 Name Q DISPLAY R TOOLS/ OPTIONS Function Press to select information displayed on the TV screen of the VCR, satellite tuner, CD player, DVD player or Bluray disc player. Press DISPLAY and TV (N) at the same time to display TV s information on the TV screen. Press to display and select the options of the DVD player or Blu-ray disc player. Press TOOLS/OPTIONS and TV (N) at the same time to display options applicable to the Sony TV. S -/-- Press to select the channel entry mode, either one or two digits of the VCR. Press -/-- and TV (N) at the same time to select the channel entry mode, either one or two digits of the TV. >10/ Press to select x track numbers over 10 of the VCR, satellite tuner or CD player. channel numbers of the Digital CATV terminal. CLEAR T Numeric buttons (number 5 a) ) U TV PUT SLEEP Press to clear a mistake when you press the incorrect numeric button. Press to preset/tune to preset stations. select track numbers of the CD player, DVD player or Blu-ray disc player. Press 0/10 to select track number 10. select channel numbers of the VCR or satellite tuner. Press the numeric buttons and TV (N) at the same time to select the TV channels. Press TV PUT and TV (N) at the same time to select the input signal (TV input or video input). Press to activate the Sleep Timer function and the duration which the receiver turns off automatically. a) The tactile dot is attached to these buttons (The number 5, MASTER VOL +/TV VOL +, H). Use as a mark of operation. b) This button is also available for DIGITAL MEDIA PORT adapter operation. For details on the function of the button, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter. Notes Some functions explained in this section may not work depending on the model. The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. 13 GB

14 ?/1 Getting Started 1: Installing the speakers This receiver allows you to use a 6 channel speaker with 2 subwoofer system. Example of a 6 channel speaker with 2 subwoofer system configuration Installing the speakers on a flat surface Before you install the center speaker, surround speakers, surround back speaker and subwoofers, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. AFront speaker (left) BFront speaker (right) CCenter speaker DSurround speaker (left) ESurround speaker (right) FSurround back speaker GSubwoofer HSubwoofer 14 GB

15 Installing the speakers on the wall You can install your surround and surround back speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker as shown in the illustrations below. 3 Hang the speakers on the screws. Hook on the back of the speaker 4.6 mm 10 mm Getting Started 4 mm more than 25 mm 4.6 mm 10 mm Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm. Notes Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. Contact a screw shop or installer regarding the wall material or screws to be used. Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 5 to 7 mm 15 GB

16 2: Connecting the speakers and subwoofers Before connecting the cords, be sure to disconnect the AC power cord. Connecting the speakers The following illustration shows how to connect to the speakers. E D A A AM UT ANTENNA EO N ONLY FOR TA-KMSW500 ONLY FOR TA-KMSW500 SYSTEM CONTROL SYSTEM CONTROL MONITOR DC5V DC5V 50mA MAX 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L FRONT DIO N R AT DVD 1 SUBWOOFER SPEAKERS A A 10 mm F C B A Speaker cord (supplied) a)b) AFront speaker (left) BFront speaker (right) CCenter speaker DSurround speaker (left) ESurround speaker (right) FSurround back speaker a) Use the long speaker cords to connect the surround and surround back speakers and the short speaker cords to connect the front speakers. b) Connect the cord attached with the CENTER label to the center speaker. 16 GB

17 To connect the speakers correctly Check the speaker type by referring to the speaker label* on the rear panel of the speakers. Character on speaker label L R SL SR SB Speaker type Front left Front right Surround left Surround right Surround back *The center speaker and subwoofers do not have any character on the speaker label. For details on the speaker type, see page 3. Tip Use the supplied speakers to optimize the system s performance. Getting Started 17 GB

18 CB CR Connecting the subwoofers The following illustration shows how to connect to the subwoofers. Note To adjust the volume of all the speakers and the subwoofers at the same time, press MASTER VOL +/ on the remote. You can also use MASTER VOLUME on the receiver. CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL PR/ SAT DVD BD MONITOR COMPONENT MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L FRONT L R DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS A B SUBWOOFER ONLY FOR SS-WP7500 SUBWOOFER SYSTEM SUBWOOFER CONTROL ONLY FOR STR-KM5500/7500/8500 SPEAKERS C A Monaural audio cord (supplied) B System control cable (supplied) C Speaker cord (supplied) a) A B ASubwoofer BSubwoofer a) Use the red and black speaker cords to connect the subwoofers. Red wire is positive (+) in polarity and should be connected to the positive (+) speaker terminal. Connect black wire to the negative ( ) speaker terminal. 18 GB

19 3: Connecting the TV You can watch the selected input image when you connect the HDMI or MONITOR jack to a TV. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Before connecting the cords, be sure to disconnect the AC power cord. Getting Started TV Audio signals Audio/video signals Video signals A B C D CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS A Audio cord (not supplied) B HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. C Component video cord (not supplied) D Video cord (not supplied) continued 19 GB

20 Note Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. Tip To output the sound of the TV from the speakers connected to the receiver, be sure to connect the audio output jacks of the TV to the TV jack of the receiver. turn off the TV s volume or activate the TV s muting function. 4a: Connecting the audio components Connecting a Super Audio CD/CD player or CD recorder The following illustration shows how to connect a Super Audio CD player, CD player or CD recorder. Before connecting the cords, be sure to disconnect the AC power cord. After connecting your Super Audio CD player, CD player or CD recorder, proceed to 4b: Connecting the video components (page 21) or 5: Connecting the antennas (page 28). Super Audio CD player/ CD player/ CD recorder A CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL CB PR/ CR DVD COAXIAL DIGITAL SAT DVD BD MONITOR COMPONENT L MONITOR DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER A Audio cord (not supplied) 20 GB

21 4b: Connecting the video components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to Component to be connected below for the pages which describe how to connect each component. Before connecting the cords, be sure to disconnect the AC power cord. After hooking up all your components, proceed to 5: Connecting the antennas (page 28). Component to be connected Component Page TV 19 With HDMI jack 22 DVD player 24 Satellite tuner/set-top box 25 DVD recorder, VCR 26 Camcorder, video game, etc. 26 Video input/output jack to be connected The image quality depends on the connecting jack. Refer to the illustration that follows. Select the connection according to the jacks on your components. HDMI Digital Note Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. Y PB/CB PR/CR COMPONENT Analog High quality image Getting Started 21 GB

22 Connecting components with HDMI jacks HDMI is the abbreviated name for High- Definition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via an HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to connect the digital audio jacks on the playback component to the receiver. turn off the TV s volume or activate the TV s muting function. DVD player Blu-ray disc player TV, etc. Audio signals Audio/video signals Audio/video signals Audio signals Audio/video signals C A A B A CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L R FRON DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Optical digital cord (not supplied) C Coaxial digital cord (supplied) 22 GB

23 Notes on HDMI connections This receiver may not be able to transfer video or audio signals with certain types of components. The multi/stereo area audio signals of a Super Audio CD are not output. Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable. Video signals input to the HDMI jack can only be output from the HDMI jack. The video input signals cannot be output from the jacks or MONITOR jacks. Refer to the operating instructions of each component connected for details. Getting Started Notes on digital audio connection When connecting optical digital cords, insert the plugs straight in until they click into place. Do not bend or tie optical digital cords. Tip All the digital audio jacks are compatible with 32 khz, 44.1 khz, 48 khz, and 96 khz sampling frequencies. 23 GB

24 Connecting a DVD player The following illustration shows how to connect a DVD player. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Note To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. Tip All the digital audio jacks are compatible with 32 khz, 44.1 khz, 48 khz, and 96 khz sampling frequencies. DVD player Audio signals Video signals A B C D CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS A Audio cord (not supplied) B Coaxial digital cord (supplied) C Component video cord (not supplied) D Video cord (not supplied) 24 GB

25 Connecting a satellite tuner/ set-top box The following illustration shows how to connect a satellite tuner or set-top box. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Notes When connecting optical digital cords, insert the plugs straight in until they click into place. Do not bend or tie optical digital cords. Tip All the digital audio jacks are compatible with 32 khz, 44.1 khz, 48 khz, and 96 khz sampling frequencies. Getting Started Satellite tuner/set-top box Audio signals Video signals A B C D CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS A Audio cord (not supplied) B Optical digital cord (not supplied) C Component video cord (not supplied) D Video cord (not supplied) 25 GB

26 Connecting components with analog video and audio jacks The following illustration shows how to connect a component which has analog jacks such as a DVD recorder, VCR, etc. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. DVD recorder, VCR Audio signals Video signals A A B B CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L R FRONT DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS (On the front panel) 2 AUTO CAL MIC L R C Camcorder/ video game A Audio cord (not supplied) B Video cord (not supplied) C Audio/video cord (not supplied) 26 GB

27 Notes Be sure to change the factory setting of the 1 input button on the remote so that you can use the button to control your DVD recorder. For details, see Changing button assignments (page 64). You can also rename the 1 input so that it can be displayed on the receiver s display. For details, see Naming inputs (page 36). Getting Started 27 GB

28 5: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. Before connecting the antennas, be sure to disconnect the AC power cord. FM wire antenna (supplied) AM loop antenna (supplied) CONNECT TO DIGITAL PUT FOR DVD BD HDMI AM Y ANTENNA BD PB/ SAT OPTICAL DVD COAXIAL DIGITAL CB PR/ CR SAT DVD BD MONITOR COMPONENT L MONITOR ONLY FOR TA-KMSW500 SYSTEM CONTROL DC5V 50mA MAX SURROUND BACK FRONT: ONLY FOR SS-MSP7500 CENTER: ONLY FOR SS-CNP7500 SURROUND: ONLY FOR SS-SRP7500 CENTER SURROUND R L L R FRONT DC5V 0.7A MAX R DMPORT SA-CD/CD/CD-R TV SAT DVD 1 SUBWOOFER SPEAKERS *The shape of the connector varies depending on the area code of this receiver. Notes To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible. 28 GB

29 6: Preparing the receiver and the remote Setting the voltage selector If your receiver and power amplifier has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet. Depending on the models of area code, the VOLTAGE SELECTOR may differ. Connecting the AC power cord Connect the AC power cord to a wall outlet. FRONT L R AC power cord Getting Started Receiver VOLTAGE SELECTOR 240V a) To the wall outlet 220V 120V b) Power amplifier 120V b) 220V 240V a) VOLTAGE SELECTOR a) For the models of area code EA: V b) For the models of area code EA: V 29 GB

30 PHONES PUT SELECTOR NIGHT MODE A.F.D. MOVIE MUSIC GAME MULTI STEREO MASTER VOLUME 2 AUTO CAL MIC L R Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation.?/1 Inserting batteries into the remote Insert two R6 (size-aa) batteries in the RM-AAU027 Remote Commander. Observe the correct polarity when installing batteries.?/1 1 Press?/1 to turn off the receiver. 2 Hold down?/1 for 5 seconds. After CLEARG appears on the display for a while, CLEARED appears. All the settings you have changed or adjusted are reset to the initial settings. Notes Do not leave the remote in an extremely hot or humid place. Do not use a new battery with old ones. Do not mix manganese batteries and other kinds of batteries. Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When you replace the batteries, the remote buttons may be reset to their factory settings. If this happens, reassign the buttons again (page 64). When the remote no longer operates the receiver, replace all the batteries with new ones. 30 GB

31 ?/1 PHONES PUT SELECTOR NIGHT MODE A.F.D. MOVIE MUSIC GAME?/1 MULTI STEREO MASTER VOLUME 2 AUTO CAL MIC L R 7: Calibrating the appropriate settings automatically (AUTO CALIBRATION) The DCAC (Digital Cinema Auto Calibration) function allows you to perform automatic calibration such as: Checking the connection between each speaker and the receiver. Adjusting the speaker level. Measuring the distance of each speaker from your seating position automatically. The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually according to your preference. For details, see 8: Adjusting the speaker levels and balance (TEST TONE) (page 34). Notes The Auto Calibration function does not work when headphones are connected. If the muting function has been activated before you perform Auto Calibration, the muting function will be set to off automatically. Optimizer microphone Getting Started Before you perform Auto Calibration Before you perform Auto Calibration, install and connect the speakers (page 14, 16). The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones to this jack. Doing so may damage the receiver and the microphone. During calibration, the sound that comes out of the speakers is very loud. The volume of the sound cannot be adjusted. Pay attention to the presence of children or to the effect on your neighborhood. Perform Auto Calibration in a quiet environment to avoid the effect of noise and to get a more accurate measurement. If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacles from the measurement area to avoid measurement error. 1 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 Set up the optimizer microphone. Place the optimizer microphone at your seating position. Use a stool or tripod so that the optimizer microphone remains at the same height as your ears. Tip When you face the speaker towards the optimizer microphone, you will get a more accurate measurement. 31 GB

32 Performing Auto Calibration The table below shows the display when measurement starts. Measurement for Display Input buttons TV PUT SLEEP DMPORT SYSTEM STANDBY 1 2 BD DVD 2CH A.F.D. TV?/1 AV?/1 MOVIE?/1 SAT TV SA-CD/CD TUNER MUSIC?/1 switch Environment noise level Speaker connection Speaker level NOISE.CHK MEASURE and SP DET. appears alternately* MEASURE and GA appears alternately* >10/ -/-- CLEAR DISPLAY DVD/BD MENU AUTO CAL D.TUNG 9 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTG TV VOL MASTER VOL AUTO CAL AMP MENU MUTG Speaker distance MEASURE and DISTANCE appears alternately* * The corresponding speaker indicator lights up in the display during measurement. 4 Measurement ends. COMPLETE appears on the display and the settings are registered. O RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET +. < > 1 Press AMP MENU. 2 Press AUTO CAL. Measurement starts in 5 seconds and the display changes as follows: A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] While the time is counting down, stand away from the measurement area to avoid measurement error. 3 Measurement starts. The measurement process will take a few minutes to complete. < MASTER VOL +/ After you have finished Disconnect the optimizer microphone from the AUTO CAL MIC jack. Notes Auto Calibration cannot detect the subwoofer. Therefore, the subwoofer settings will be maintained. If you have changed the position of the speakers, it is recommended that you perform Auto Calibration again to enjoy the surround sound. You cannot select Auto Calibration when the headphones are connected. Tips When Auto Calibration starts: Stand some distance away from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement. Avoid making noise to get a more accurate measurement. The Auto Calibration function will be canceled when you do the following during the measurement process: Press?/1 or MUTG. Press the input buttons or turn the PUT SELECTOR on the receiver. Change the MASTER VOLUME level. Connect the headphones. Press AUTO CAL again. 32 GB

33 Error and warning codes When error codes appear When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows: Error code t blank display t (error code t blank display) a) t PUSH t blank display t ENTER a) Appears when there are more than one error code. To rectify the error 1 Record down the error code. 2 Press. 3 Press?/1 to turn off the receiver. 4 Rectify the error. For details, see Error codes and remedies below. 5 Turn on the receiver and perform Auto Calibration again (page 32). Error codes and remedies Error code ERROR 10 ERROR 11 ERROR 12 ERROR 20 ERROR 21 ERROR 23 Cause and remedy The environment is too noisy. Make sure the environment is quiet during Auto Calibration. The speakers are placed too near the optimizer microphone. Place your speakers further away from the optimizer microphone. None of the speakers are detected. Make sure that the optimizer microphone is connected properly and perform Auto Calibration again. The front speakers are not detected or only one front speaker is detected. Check the front speakers connection. Only one surround speaker is detected. Check the surround speakers connection. Surround back speaker is detected but surround speakers are not connected. Be sure to connect the surround speakers. When warning codes appear During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows: Warning code t blank display t (warning code t blank display) b) t PUSH t blank display t ENTER b) Appears when there are more than one warning code. You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually. To change the settings manually 1 Record down the warning code. 2 Press. 3 Press?/1 to turn off the receiver. 4 Follow the solution provided in the Warning codes and solutions below. 5 Turn on the receiver and perform Auto Calibration again (page 32). Warning codes and solutions Warning code WARN. 40 WARN. 50 WARN. 51 WARN. 52 WARN. 60 WARN. 62 Explanation and solution The environment is noisy. Make sure the environment is quiet during Auto Calibration. The center speaker is not connected. Be sure to connect the center speaker. The surround speakers are not connected. Be sure to connect the surround speakers. The surround back speaker is not connected. Be sure to connect the surround back speaker. The front speakers balance are out of range. Reposition your front speakers. c) The center speaker level is out of range. Reposition your center speaker. d) continued 33 GB Getting Started

34 Warning code WARN. 63 WARN. 64 WARN. 65 WARN. 70 WARN. 72 WARN. 73 WARN. 74 WARN. 75 Explanation and solution The surround left speaker level is out of range. Reposition your surround left speaker. d) The surround right speaker level is out of range. Reposition your surround right speaker. d) The surround back speaker level is out of range. Reposition your surround back speaker. d) The front speakers distance are out of range. Reposition your front speakers. c) The center speaker distance is out of range. Reposition your center speaker. d) The surround left speaker distance is out of range. Reposition your surround left speaker. d) The surround right speaker distance is out of range. Reposition your surround right speaker. d) The surround back speaker distance is out of range. Reposition your surround back speaker. d) c) For details, refer Front speaker distance (page 47). d) For details, refer Tip on page 47. 8: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. TV PUT SLEEP DMPORT SYSTEM STANDBY 1 2 BD DVD SAT TV SA-CD/CD TUNER 2CH A.F.D >10/ -/-- CLEAR DISPLAY TV?/1 AV?/1 MOVIE?/1 MUSIC DVD/BD MENU AUTO CAL D.TUNG 9 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTG Input buttons AMP MENU V/v/B/b, O TV VOL MASTER VOL RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET +. < > < MASTER VOL +/ 1 Press AMP MENU. 1-LEVEL appears on the display. 2 Press or b to enter the menu. 3 Press V/v repeatedly to select T. TONE. 4 Press or b to enter the parameter. 34 GB

35 5 Press V/v repeatedly to select T. TONE Y. The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround back t Surround left t Subwoofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see Adjusting the level (LEVEL menu) (page 42). Tips To adjust the level of all speakers at the same time, press MASTER VOL +/. You can also use MASTER VOLUME on the receiver. The adjusted value are shown on the display during adjustment. 7 Repeat steps 1 to 5 to select T. TONE N. You can also press any input buttons. The test tone turns off. Playback Selecting a component Input buttons TV PUT SLEEP DMPORT SYSTEM STANDBY 1 2 BD DVD SAT TV SA-CD/CD TUNER 2CH A.F.D >10/ -/-- CLEAR DISPLAY O TV?/1 AV?/1 MOVIE MUSIC DVD/BD MENU AUTO CAL D.TUNG 9 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS?/1 MUTG TV VOL MASTER VOL RETURN/EXIT MENU/HOME TV CH TV CH + PRESET REPLAY ADVANCE PRESET +. < > < AMP MENU MUTG MASTER VOL +/ Playback When a test tone is not output from the speakers The speaker cords may not be connected securely. The speaker cords may have the short-circuit problem. 1 Press the input button to select a component. You can also use PUT SELECTOR on the receiver. The selected input appears on the display. Selected input [Display] DMPORT [DMPORT] 1 [ 1] 2 [ 2] BD [BD] Components that can be played back DIGITAL MEDIA PORT adapter connected to DMPORT jack DVD recorder, VCR, etc., connected to the 1 jack Camcorder, video game, etc., connected to the 2 jack Blu-ray disc player, etc., connected to the BD jack continued 35 GB

36 Selected input [Display] DVD [DVD] SAT [SAT] TV [TV] SA-CD/CD [SA-CD/CD/ CD-R]* Components that can be played back DVD player, etc., connected to DVD jack Satellite tuner, etc., connected to the SAT jack TV, etc. connected to TV jack Super Audio CD/CD player, etc., connected to the SA-CD/CD/CD-R jack TUNER Built-in radio tuner [FM or AM band] * SA-CD/CD/CD-R scroll across the display, then SA-CD/CD appears. 2 Turn on the component and start playback. 3 Press MASTER VOL +/ to adjust the volume. You can also use MASTER VOLUME on the receiver. To activate the muting function Press MUTG. The muting function will be canceled when you do the following. Press MUTG again. Increase the MASTER VOLUME. Turn off the receiver. To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. To listen to the subwoofers You can use the SUBWOOFER VOLUME on the power amplifier to adjust the volume of the subwoofers. Set the volume level to suit your preference according to the selected input as slight adjustments may enhance the sound. If you set the subwoofer volume to maximum, extraneous noise may be heard depending on the source you are playing. Naming inputs You can enter a name of up to 8 characters for inputs and display it on the receiver s display. This is convenient for labeling the jacks with the names of the connected components. 1 Press the input button to select the input you want to create an index name for. You can also use PUT SELECTOR on the receiver. 2 Press AMP MENU. 1-LEVEL appears on the display. 3 Press V/v repeatedly to select 7-SYSTEM. 4 Press or b to enter the menu. 5 Press V/v repeatedly to select NAME. 6 Press or b to enter the parameter. The cursor flashes and you can select a character. 7 Press V/v to select a character, then press B/b to move the cursor to the next position. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. Tips You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols To enter a blank space, press b without selecting a character. 8 Press. The name you entered is registered. 36 GB

37 PHONES NIGHT MODE A.F.D. MOVIE MUSIC GAME MULTI STEREO 2 AUTO CAL MIC L R Listening/Watching a component Listening to a Super Audio CD/CD TV PUT TV?/1 SLEEP DMPORT AV?/1 SYSTEM STANDBY 1 2 BD DVD SAT TV SA-CD/CD TUNER 2CH A.F.D. MOVIE >10/ MEMORY -/-- 0/10 ENTER CLEAR TOOLS/ DISPLAY OPTIONS?/1 MUSIC DVD/BD MENU AUTO CAL D.TUNG D.SKIP AMP MENU MUTG 2 3?/1 PUT SELECTOR MASTER VOLUME 5 Playback O RETURN/EXIT TV CH PRESET REPLAY. < TUNG m TV H X TV VOL MASTER VOL MENU/HOME TV CH + ADVANCE PRESET + > < TUNG + M FM MODE x 5 3 Notes The operation is described for a Sony Super Audio CD player. Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tips You can select the sound field to suit the music. Refer to page 52 for details. Recommended sound fields: Classical: HALL Jazz: JAZZ Live concert: CONCERT You can listen to the sound that was recorded in the 2 channel format from all speakers (multi channel). Refer to page 50 for details. 1 Turn on the Super Audio CD player/cd player, then place the disc on the tray. 2 Turn on the receiver. 3 Press SA-CD/CD. You can also use PUT SELECTOR on the receiver to select SA-CD/CD/CD-R. 4 Playback the disc. 5 Adjust to a suitable volume. 6 After you have finished listening to the Super Audio CD/CD, eject the disc and turn off the receiver and Super Audio CD player/ CD player. 37 GB

38 PHONES NIGHT MODE A.F.D. MOVIE MUSIC GAME MULTI STEREO 2 AUTO CAL MIC L R Watching a DVD/Blu-ray disc TV PUT TV?/1 SLEEP DMPORT AV?/1 SYSTEM STANDBY 1 2 BD DVD SAT TV SA-CD/CD TUNER 2CH A.F.D. MOVIE >10/ MEMORY -/-- 0/10 ENTER CLEAR TOOLS/ DISPLAY OPTIONS?/1 MUSIC DVD/BD MENU AUTO CAL D.TUNG D.SKIP AMP MENU MUTG 2 3?/1 PUT SELECTOR MASTER VOLUME 6 O RETURN/EXIT TV CH PRESET REPLAY. < TV VOL MASTER VOL MENU/HOME TV CH + ADVANCE PRESET + > < 6 TUNG m TV H X TUNG + M FM MODE x Notes Refer to the operating instructions supplied with the TV and DVD player/blu-ray disc player. Check the following if you cannot listen to multi channel sound. Be sure this receiver is connected to the DVD player/ Blu-ray disc player via a digital connection. Be sure the digital audio output of the DVD player/ Blu-ray disc player is set up properly. Tips Select the sound format of the disc to be played, if necessary. You can select the sound field to suit the movie/music. Refer to page 52 for details. Recommended sound fields: Movie: C.ST.EX Music: CONCERT 3 1 Turn on the TV and DVD player/blu-ray disc player. 2 Turn on the receiver. 3 Press DVD to watch a DVD or press BD to watch a Blu-ray disc. You can also use PUT SELECTOR on this receiver to select DVD or BD. 4 Switch the input of the TV so that an image of the DVD/Blu-ray disc is displayed. 5 Playback the disc. 6 Adjust to a suitable volume. 7 After you have finished watching the DVD/ Blu-ray disc, eject the disc and turn off the receiver, TV and DVD player/blu-ray disc player. 38 GB