Pfaudler Mixing Systems. Reduce processing times and save costs
|
|
- Theresa O’Neal’
- 7 years ago
- Views:
Transcription
1 Pfaudler Mixing Systems Reduce processing times and save costs R E A C T O R S Y S T E M S
2 Reduce processing times and save costs with Pfaudler Mixing Systems PFAUDLER-BALFOUR - a worldwide leader in the manufacture of process equipment -produces mixing systems to meet any application, process condition, mixing operation and viscosity range. TYPICAL FLOW PATTERNS Pfaudler-Balfour can recommend the optimum mixing system for specific requirements and show how it can be modified or changed. If required, a custom impeller or agitator can also be designed and built. Significant cost savings can be achieved by mixing and matching impellers to: optimise product quality and yield reduce mixing/process times optimise the agitation process maximise energy efficiencies ensure performance effectiveness respond to changing market conditions Curved Blade Turbine Pfaudler Mixing Systems improve product quality and yield while minimising costs. Optimal agitation process The Cryo-Lock option is a complete all in one mixing system based on a single reactor with a wide variety of interchangeable agitator blades. This flexibility means blade configurations can be altered to best suit the requirements of each product. For all mixing systems, Pfaudler can also produce computer simulations to maximise the efficiencies in each of the five basic processes: mixing/blending suspension gas absorption/dispersion emulsification heat transfer Turbofoil Impeller
3 Pfaudler Mixing Systems - improve product quality and yield while minimising costs Reduced process times With some products, switching to a turbofoil blade from a standard fixed agitator can lead to mixing times being reduced by half while pumping capacity is almost doubled. 1 1,0 0,8 Reduced mixing time 2,5 2,0 Increased pumping capacity 2 3 0,6 0,4 1,5 1,0 4 0,2 0 RCI 1100 CBT 835 PBT 890 TBF 990 0,5 0 Blade Type P/V=Constant RCI 1100 CBT 835 PBT 890 TBF Cryo-Lock Family of Agitators Blending Heat Emulsion Suspension Gas Transfer Dispersion 1 ANC Anchor 2 PBT Pitched Blade Turbine 3 FBT Flat Blade Turbine 4 MFI Multi-Flight Impeller 5 RCI Retreat Curve Impeller 6 TBF Turbofoil 7 CBT Curved Blade Turbine
4 Performance characteristics ANC anchor low shear tangential flow high torque for higher viscosity fluids can operate at low liquid levels PBT Pitched Blade Turbine moderate shear (higher flowto-shear ratio) combined radial and axial flow relatively high drive speed FBT Flat Blade Turbine high shear load pure radial flow Unlimited impeller options Impeller and baffle configurations can be adapted to serve all basic process operations. In addition, other factors, such as drive speed and baffle arrangement, can be altered to enable most impellers to be used in more than one of the five basic unit operations. 4 MFI Multi-Flight Impeller where single impeller is inadequate for high viscosity fluids lightweight solids in narrow vessels RCI Retreat Curve Impeller versatile, general purpose design high radial flow wider baffling required insensitive to viscosity variations suitable for low liquid levels, small batches TBF Turbofoil low shear forces high axial flow at relatively low baffling low torque low power-consumption CBT Curved Blade Turbine high shear radial flow wider baffling required with low viscous fluids
5 Improve power and energy efficiencies Increased energy efficiencies Effective system design means power input can be reduced by achieving: optimum heat transfer uniform dissipation of energy and low energy demand. Energy savings of up to 35 per cent have been achieved. Power applications and advantages Homogenisation A high performance agitator Turbofoil (3.2kW) needs 35% less energy compared to an Impeller (5.1kW). On the basis of BE 6300, SG = 1.3 and viscosity = 20cp. Gas-Dispersion Replacing an Impeller (RCI) with a standard agitator (CBT) can triple gas-absorption rates. On the basis of 1 kw/m3, 630 m3/h instead of 220 m3/h. Agitator Power (KW) Power Diagram AE/BE/CE 6300 for SG = 1.3 and viscosity = 100cp Agitator Speed (rpm) Impeller TBF Drive VSO 8/100 Drive VSO 16/100 Suspension For solid particles distribution needs, the Pitched Blade Turbine (PTB) at 4.2 kw can lead to energy savings of 3.7 kw over the Impeller (RCI), representing a considerable cost saving during the year Crystallisation Replacing the anchor (ANC) with the double stage Turbofoil can increase output by 30%.
6 Minimise downtimes and maintenance costs Safety and environmental protection The dismountable system is corrosive resistant and considerably reduces the risk of leakage caused by splitting vessels and replacing gaskets. Cryo-Lock enables gasket sizes for BE 6300 vessels to be reduced by 2,500 mm compared to the CE 6300 versions, resulting in a 60% reduced leakage rate at vacuum conditions. Performance effectiveness Further cost efficiencies result from Cryo-Lock s unique dismountable design which means the single shaft stays in place so only the blades are changed. Liquid nitrogen cooling enables the blade to be easily accessed and removed quickly. Cryo-Lock impellers in a BE vessel can be changed in less than two hours compared to two days or more for standard impeller in a CE vessel design. There is also no need to replace a Cryo-Lock agitator shaft when only the impeller has suffered damage. This can be changed inside the cleaned reactor without removing the shaft, drive, motor or access cover. Replacement agitators can also be stored economically. Pfaudler s Glasteel reactor technology means vessel and agitator life is maximised for mixing corrosive substances. All these factors contribute to minimal downtimes and maintenance costs. The perfect complement to Pfaudler Mixing Systems. Pfaudler-ProSol Next generation mixing systems Pfaudler In-Line Drives For glass and alloy mixing systems Total Flexibility Pfaudler-Balfour s mixing technology offers total flexibility. You can respond immediately to changing market conditions by: reconfiguring your Glasteel reactor modifying or completely changing the mixing operation To find out how Cryo-Lock can save costs by optimising product quality and yield contact: Pfaudler-ProSol See Technical Data Bulletin No: Pfaudler In-Line Drives See Technical Data Bulletin No: Pfaudler-Balfour Leven, Fife, Scotland, KY8 4RW. Tel: (01333) Fax: (01333) mailus@pfaudlerbalfour.co.uk Website: R E A C T O R S Y S T E M S TECHNICAL DATA BULLETIN NO:
Mixing in the process industry: Chemicals Food Pharmaceuticals Paper Polymers Minerals Environmental. Chemical Industry:
Mixing Notes: Chapter 19 Robert P. Hesketh Mixing in the process industry: Chemicals Food Pharmaceuticals Paper Polymers Minerals Environmental Chemical Industry: Paints and Coatings Synthetic Rubbers
More informationAutoclave Engineers. Laboratory Stirred Reactors. Stirred Reactors
Autoclave Engineers Laboratory Stirred Reactors Stirred Reactors Stirred Reactors Autoclave Engineers has been associated with excellence in pressurized reaction equipment for over 50 years. Autoclave
More informationAN EFFECT OF GRID QUALITY ON THE RESULTS OF NUMERICAL SIMULATIONS OF THE FLUID FLOW FIELD IN AN AGITATED VESSEL
14 th European Conference on Mixing Warszawa, 10-13 September 2012 AN EFFECT OF GRID QUALITY ON THE RESULTS OF NUMERICAL SIMULATIONS OF THE FLUID FLOW FIELD IN AN AGITATED VESSEL Joanna Karcz, Lukasz Kacperski
More informationLaboratory scale mixers
Laboratory scale mixers Silverson Laboratory mixers are suitable for the widest range of applications - mixing, emulsifying, homogenizing, disintegrating, dissolving - with an efficiency and flexibility
More informationFLUID FLOW AND MIXING IN BIOREACTORS (Part 2 of 2)
FLUID FLOW AND MIXING IN BIOREACTORS (Part 2 of 2) Overview Power requirements for mixing Newtonian and non-newtonian liquids Ungassed and gassed systems Scale-up issues, scale-down approach Adapting bioreactor
More informationglobe reactions made easy Process perfection
globe reactions made easy Process perfection Benefits More reactions in less time: The Globe oil drain unit and quick clamp allow single hand vessel changes in seconds Space saving: 50ml, 100ml, 250ml,
More informationSanStar Series SSi and SSO Mixers SANITARY MIXERS
SanStar Series SSi and SSO Mixers SANITARY MIXERS A World Leader In Industrial Mixing Since 1923. Lightnin has 90 years of unrivaled experience in industrial mixing technology, process knowledge, and technological
More informationBSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
More informationRadial-axial Radial mixing is based on the premise that the fluids to be mixed enter the mixer in the correct proportions simultaneously
Brochure E-0501 1 Introduction. Static mixers are used for a wide range of applications including mixing, heat exchange and dispersion, due to numerous unique innovations our products are especially suitable
More informationPFT Two stage axial fan The high pressure fan for modern boiler plants
PFT Two stage axial fan The high pressure fan for modern boiler plants Modern boilers equipped with complete flue-gas cleaning systems demand fans for high pressure that can be controlled quickly and accurately
More informationMechanical shaft seal types and sealing systems
Chapter 2 Mechanical shaft seal types and sealing systems 1. Mechanical shaft seal types 2. Sealing systems 3. Selecting a mechanical shaft seal Mechanical shaft seal types and sealing systems 1. Mechanical
More informationNEW IMPELLER DESIGN: ANTI-RAGGING IMPELLER, ARI2
14 th European Conference on Mixing Warszawa, 10-13 September 2012 NEW IMPELLER DESIGN: ANTI-RAGGING IMPELLER, ARI2 Robert Higbee a, Jason Giacomelli a, Wojciech Wyczalkowski a a Philadelphia Mixing Solutions,
More informationGuth Portable gitators R The long-term solution pplications Guth Portable gitators R are used for the mixing, stirring and the homogenization of water-like or medium viscosity products. They are most often
More informationANDRITZ Pumps Products, systems, applications
ANDRITZ Pumps Products, systems, applications www.andritz.com/pumps ANDRITZ Pumps Performance based on experience, competence and quality Double suction split case pump for conveying water and suspensions
More informationPumps: Convert mechanical energy (often developed from electrical source) into hydraulic energy (position, pressure and kinetic energy).
HYDRAULIC MACHINES Used to convert between hydraulic and mechanical energies. Pumps: Convert mechanical energy (often developed from electrical source) into hydraulic energy (position, pressure and kinetic
More informationWaterjets. propulsors. courtesy of Austal
Waterjets The Rolls-Royce Kamewa waterjet range is the broadest in the business. Manufactured in aluminium and stainless steel, they are available in powers from kw to above 36MW. Using the latest design
More informationNo compromise. Highest total efficiency wastewater pumping. grundfos se & sl ranges Submersible and dry-installed wastewater pumps
grundfos se & sl ranges Submersible and dry-installed wastewater pumps 0.9-30 kw 2, 4, 6 pole 50Hz No compromise Highest total efficiency wastewater pumping ULTIMATE WASTEWATER PUMPING TECHNOLOGY The renewed
More informationZeta magnetic agitators. For applications in sterile process technology. www.zeta.com
Zeta magnetic agitators For applications in sterile process technology www.zeta.com Zeta agitators for a wide range of applications Our agitators are used wherever the highest requirements for sterile
More informationGLASS-LINED REACTORS ARE ESSENTIAL
Understand Flow Patterns in Glass-Lined Reactors David S. Dickey MixTech, Inc. Kevin J. Bittorf Perrigo Co. Christopher J. Ramsey Applied Process Technology Group Keith E. Johnson Consultant Physical modeling
More information5.2. Vaporizers - Types and Usage
5.2. Vaporizers - Types and Usage 5.2.1. General Vaporizers are constructed in numerous designs and operated in many modes. Depending upon the service application the design, construction, inspection,
More informationCorrugated Tubular Heat Exchangers
Corrugated Tubular Heat Exchangers HEAT EXCHANGERS for the 21st CENTURY Corrugated Tubular Heat Exchangers (CTHE) Corrugated Tube Heat Exchangers are shell and tube heat exchangers which use corrugated
More information800 Series Tier 2 / Stage 2
800 Series Tier 2 / Stage 2 Powered by your needs Perkins has been advancing diesel engine technology for over 70 years. Today we are designing, developing and manufacturing engines that meet customer
More informationPUTTING THE SPIN IN CFD
W H I T E PA P E R PUTTING THE SPIN IN CFD Overview Engineers who design equipment with rotating components need to analyze and understand the behavior of those components if they want to improve performance.
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationHow to choose the right mixer for high-viscosity mixing applications. More choices for virtually all applications
How to choose the right mixer for high-viscosity mixing applications. More choices for virtually all applications A few years ago, the process of selecting a mixer for most applications was straight- forward.
More informationHEAVY OIL FLOW MEASUREMENT CHALLENGES
HEAVY OIL FLOW MEASUREMENT CHALLENGES 1 INTRODUCTION The vast majority of the world s remaining oil reserves are categorised as heavy / unconventional oils (high viscosity). Due to diminishing conventional
More informationBASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
More informationHIGH TEMPERATURE TWIN SCREW PUMPS. By: David B. Parker Two Screw Product Engineer IMO Pump Warren Warren, Massachusetts
HIGH TEMPERATURE TWIN SCREW PUMPS By: David B. Parker Two Screw Product Engineer IMO Pump Warren Warren, Massachusetts David B. Parker is the Two Screw Product Engineer for IMO Pump - Warren, in Warren,
More informationCENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc.
CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. 1 Centrifugal Pump- Definition Centrifugal Pump can be defined as a mechanical device used to transfer liquid of various types. As
More informationFlygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
More informationThe design of fermenter
The design of fermenter 1. Introduction 2. Standard geometry of a stirred tank bioreactor 3. Headspace volume 4. Basic features of a stirred tank bioreactor 4.1. Agitation system 4.1.1 Top entry and bottom
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 26 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationPVS 185, 600, 1200, 1800, 2700 Series Portable Purification Systems
185, 600, 1200, 1800, 2700 Series Portable Purification Systems FEATURING Global Filtration Technology PRINCIPLES OF OPERATION Contaminated oil is drawn into the Parker Portable Purification System by
More informationCourse Material Compiled By Prof. Mihir Shah, DDU
Short Term Training Programme On Process Engineering: Agitation & Mixing Conducted by Anchor Institute (Chemicals & Petrochemicals) Promoted by Industries Commissionerate & Department of Chemical Engineering
More informationSimply smart, highly sustainable: The MAS Extruder for PET Recycling. Brilliant colour at highest quality
Simply smart, highly sustainable: The MAS Extruder for PET Recycling. Brilliant colour at highest quality MAS systems have the answer to every PET extrusion challenge. Versatile : processing spectrum The
More informationTransformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
More informationTRIMIX INDUSTRIAL MIXER
TRIMIX INDUSTRIAL MIXER TheMixing of the and the experience 50 years experience Since it was founded Rayneri has concentrated all its energy and savoir-faire in a particular area namely mixing. Year upon
More informationsealed close coupled pumps
sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed
More informationPump Selection and Sizing (ENGINEERING DESIGN GUIDELINE)
Guidelines for Processing Plant Page : 1 of 51 Rev 01 Feb 2007 Rev 02 Feb 2009 Rev 03 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru. (ENGINEERING DESIGN GUIDELINE)
More informationOptimizing Tank Cleaning Operations
Optimizing Tank Cleaning Operations Choosing the best way to thoroughly clean your tanks while minimizing use of costly chemicals, water and manual labor can be challenging. There are several things you
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationIN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
More informationACRYLICS. The properties of the resulting acrylics vary depending on the nature of the alkyl groups both on the alcohol and the acrylic acid.
AYLIS Acrylics are polyesters based on acrylic acid (propenoic acid - H 2 =H 2 H) formed from the polymerisation of an alkyl acrylate ester. They are widely used in the surface coatings industry (e.g.
More informationC. starting positive displacement pumps with the discharge valve closed.
KNOWLEDGE: K1.04 [3.4/3.6] P78 The possibility of water hammer in a liquid system is minimized by... A. maintaining temperature above the saturation temperature. B. starting centrifugal pumps with the
More informationFluid Mechanics: Static s Kinematics Dynamics Fluid
Fluid Mechanics: Fluid mechanics may be defined as that branch of engineering science that deals with the behavior of fluid under the condition of rest and motion Fluid mechanics may be divided into three
More informationOil & Gas. CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition.
Oil & Gas CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition. 2 Introduction CHTR Reliable delivery at high pressure. Day in and day out, KSB pumps prove their worth again
More informationTECHNICAL INFORMATION Bulletin
Peerless Pump Company 2005 Dr. M.L. King Jr. Street, P.O. Box 7026, Indianapolis, IN 46207-7026, USA Telephone: (317) 925-9661 Fax: (317) 924-7338 www.peerlesspump.com www.epumpdoctor.com TECHNICAL INFORMATION
More informationVertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
More informationMAINTENANCE INSTRUCTIONS. Thermia Robust heat pump
MAINTENANCE INSTRUCTIONS Thermia Robust heat pump 9 6 8 0-5 4 7 4 5 0 0 1 R e v. 3 Table of contents 1 Important information.................. 2 1.1 Product description....................... 2 1.2 General................................
More information4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationAn SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
More informationRelevance of Modern Optimization Methods in Turbo Machinery Applications
Relevance of Modern Optimization Methods in Turbo Machinery Applications - From Analytical Models via Three Dimensional Multidisciplinary Approaches to the Optimization of a Wind Turbine - Prof. Dr. Ing.
More informationVertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
More informationVapor Chambers. Figure 1: Example of vapor chamber. Benefits of Using Vapor Chambers
Vapor Chambers A vapor chamber is a high-end thermal management device that can evenly dissipate heat from a small source to a large platform of area (see Figure 1). It has a similar construction and mechanism
More informationViscosity: A Property of fluids 307-6 Compare the viscosity of various liquids 307-7 Describe factors that can modify the viscosity of a liquid 208-6
Viscosity: A Property of fluids 307-6 Compare the viscosity of various liquids 307-7 Describe factors that can modify the viscosity of a liquid 208-6 Design an experiment to test the viscosity of various
More informationSIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
More informationPump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
More informationATTRITORS AND BALL MILLS HOW THEY WORK. Robert E. Schilling, M. Yang UNION PROCESS INC. Akron, Ohio. Presented. Robert "Bob" Schilling
ATTRITORS AND BALL MILLS HOW THEY WORK Robert E. Schilling, M. Yang UNION PROCESS INC. Akron, Ohio Presented by Robert "Bob" Schilling Presented at the Philadelphia Society For Coatings Technology Inc.
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 1 HYDRAULIC PUMPS The material needed for outcome 2 is very extensive so there
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS Frames 143T - 449TZ 5100 North IH 35 Round Rock, Texas 78681 Phone: 800-451-8798 512-255-4141 Fax: 512-244-5512 RECEIVING 1. Check
More informationA GUIDE TO UNDERSTANDING AND MIXING THICKENERS
A GUIDE TO UNDERSTANDING AND MIXING THICKENERS Rheology modifiers, commonly referred to as thickeners or viscosifiers, are everpresent in most products. The use of these additives cut across several process
More informationClear Advantage. EveryTMEngine. QSB6.7 And QSL9 (190-400 hp) Tier 4 Interim/Stage IIIB
Clear Advantage. EveryTMEngine. QSB6.7 And QSL9 (190-400 hp) Tier 4 Interim/Stage IIIB Clear Advantage. Every Engine. Your Best Solution. Every Time. With the arrival of more stringent emissions regulations,
More informationElectronic Flow Switches
Industries Electronic Flow Switches Petrochemical Refining Oil Production Water Treatment Pharmaceutical Food and Beverage Pulp and Paper Power Production Gas Processing Mining Biotechnology Semiconductor
More informationAbatch ribbon blender can process dry powders, granules, Four practical ways to optimize your batch ribbon blender s efficiency
Reprinted from PBE January 2008 Four practical ways to optimize your batch ribbon blender s efficiency Christine Angos and Warren Ang Charles Ross & Son Co. The batch ribbon blender s versatility for mixing
More informationBoiler Feed Pumps in Utility Power Stations. Generate Power Reliably and Economically
Boiler Feed Pumps in Utility Power Stations Generate Power Reliably and Economically We will make sure 2 KSB Your Pump and Valve Specialist Worldwide you achieve the maximum yield Through targeted investments
More informationFAN PROTECTION AGAINST STALLING PHENOMENON
FAN PROTECTION AGAINST STALLING PHENOMENON Roberto Arias Álvarez 1 Javier Fernández López 2 2 1 ZITRON Technical Director roberto@zitron.com ZITRON Technical Pre Sales Management jfernandez@zitron.com
More informationEngineering & Expertise Designing pump sumps
Engineering & Expertise Designing pump sumps Large submersible centrifugal pumps Engineering & Expertise Total solution engineering increases operational efficiency Introduction The proper design of the
More informationQL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps
QL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps QL QLQ QLC QLQC Experience In Motion Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No
More informationINJECTION MOLDING PROCESSING GUIDE Polymer
FOAMAZOL Chemical Foaming Agents INJECTION MOLDING PROCESSING GUIDE Polymer Foaming Agent INJECTION MOLDING WITH CHEMICAL FOAMING AGENTS Introduction The injection molding of structural foam molded parts
More informationOil / Air Cooling Units for mechanical engineering and mobile hydraulics
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics ViFlow Finland Oy Kauppakartanontie 7 A 1 00930 Helsinki, Finland tel. +358 40 178 0920 fax +358 9 4789 2800 viflow@viflow.fi www.viflow.fi
More informationSAILBOAT 2015 ENGINES, OPTIONS AND NEWS
SAILBOAT 2015 ENGINES, OPTIONS AND NEWS 2 A MATTER OF RELIABILITY A MATTER OF RELIABILITY Whether you see sailing as a purely fun and relaxing pastime or as a challenge to conquer sea and wind, you always
More informationV52-850 kw The turbine that goes anywhere
V2-8 kw The turbine that goes anywhere Versatile, efficient, dependable and popular The highly efficient operation and flexible configuration of the V2 make this turbine an excellent choice for all kinds
More informationDOEN THRUSTMASTER WATER JETS. 100 Series. 100kW to 900kW. History. Innovation. Power. thrustmaster.net
THRUSTMASTER 100 Series 100kW to 900kW History. Innovation. Power. thrustmaster.net THRUSTMASTER FEATURES PERFORMANCE DURABILITY POWER FLEXIBILITY CONTROL Integral Reduction Box Providing perfect impeller
More informationPump ED 101. Positive Displacement Pumps. Part I Reciprocating Pumps
Pump ED 101 Positive Displacement Pumps Part I Reciprocating Pumps Joe Evans, Ph.D http://www.pumped101.com There are many pump designs that fall into the positive displacement category but, for the most
More informationIntroduction of the Solar Turbines Titan 250 Gas Turbine System
Introduction of the Solar Turbines Titan 250 Gas Turbine System Design, Development and Validation Testing a New 22.4 MW Gas Turbine VGB Fachtagung 24-JUN-2009 Mannheim, Germany Ulrich Stang Manager Turbine
More informationPVS Series - Models 185, 600, 1200, 1800 and 2700
PVS Series - Models 185, 600, 1200, 1800 and 2700 Reduce the catastrophic results of water contamination Eliminate water from the hydraulic system The PVS Series Portable Purification Systems, available
More informationChapter 3.5: Fans and Blowers
Part I: Objective type questions and answers Chapter 3.5: Fans and Blowers 1. The parameter used by ASME to define fans, blowers and compressors is a) Fan ration b) Specific ratio c) Blade ratio d) Twist
More informationFume Extraction: Guide to Safely Managing Solder Fumes in the Workplace
Fume Extraction: Guide to Safely Managing Solder Fumes in the Workplace Our thanks to OK International for allowing us to reprint the following. Why do we need fume extraction? Today s Electronics workplace
More informationPumps for Pipelines and Transportation
Engineering Flow Solutions Pumps for Pipelines and Transportation API 610 / ISO 13709:9 Midstream The main volume of the oil transit accounts for the pipeline transport. Around 97% of produced oil is
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationRETROFIT N ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS
RETROFIT N ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS N Stosic, Chair in Positive Displacement Compressors, I K Smith, Professor of Applied Thermodynamics and A Kovacevic, Research Fellow Centre
More informationMAXIMISING YOUR. Offshore wind assets ASSET OPERATION & MAINTENANCE SERVICES
MAXIMISING YOUR Offshore wind assets ASSET OPERATION & MAINTENANCE SERVICES RES is one of the world s leading renewable energy companies active in the wind, wave, tidal, solar and biomass sectors Asset
More informationIntelligence down to the last detail.
Intelligence down to the last detail. We question what is already there. That is how we create something new. Those who have developed high-quality products are faced with two options: to declare themselves
More informationGeneral Information. Applications
SCREW PUMPS General Information Several centuries BC, Archimedes the Greek philosopher, developed a turning spirally wound tube to raise water to a higher level for irrigation purposes. Over 100 years
More informationApplication and Design of the ebooster from BorgWarner
Application and Design of the ebooster from BorgWarner Knowledge Library Knowledge Library Application and Design of the ebooster from BorgWarner With an electrically assisted compressor, the ebooster,
More informationWe will study the temperature-pressure diagram of nitrogen, in particular the triple point.
K4. Triple Point of Nitrogen I. OBJECTIVE OF THE EXPERIMENT We will study the temperature-pressure diagram of nitrogen, in particular the triple point. II. BAKGROUND THOERY States of matter Matter is made
More informationWe will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
More informationH i g H E n E r gy, M u lti-stag E, D i ffu s E r type, Bar r E l Cas E, B Oi le r fe E D pu M p
CUP-FK High Energy, Multi-stage, Diffuser Type, BARREL CASE, BOILER FEED PUMP SPX - An introduction SPX is a Fortune 500 multi-industry manufacturing leader, headquartered in Charlotte, North Carolina.
More informationConsumer Guide. Split System: Wall Mounted Inverter Heat Pumps
Consumer Guide Split System: Wall Mounted Inverter Heat Pumps 6 6 Another Hitachi Day Imagine choosing your perfect day then instantly creating it in the comfort of your own home. With Hitachi heat pumps
More informationWIND TURBINE TECHNOLOGY
Module 2.2-2 WIND TURBINE TECHNOLOGY Electrical System Gerhard J. Gerdes Workshop on Renewable Energies November 14-25, 2005 Nadi, Republic of the Fiji Islands Contents Module 2.2 Types of generator systems
More informationN-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING Flygt The Concept N-Pump series. Bringing NEW levels of efficiency to wastewater handling applications Reduced pumping efficiency,
More informationMZToothed colloid mill
MZToothed colloid mill For refining, homogenizing, dispersing and emulsifying liquid to highly viscous products Mustard Mayonnaise Nut pastes Peanut butter Sesame The product is fed to the mill either
More informationINTERNAL COMBUSTION (IC) ENGINES
INTERNAL COMBUSTION (IC) ENGINES An IC engine is one in which the heat transfer to the working fluid occurs within the engine itself, usually by the combustion of fuel with the oxygen of air. In external
More informationEXPERIMENTAL VALIDATION AND COMBUSTION CHAMBER GEOMETRY OPTIMIZATION OF DIESEL ENGINE BY USING DIESEL RK
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More information