PRICING AND SPECIFICATIONS

Transcription

1 PRICING AND SPECIFICATIONS Effective February Supersedes all prior versions.

2 NEW PRODUCTS New Base Cabinet with Tray Divider (B09TD), see page 20 New SKU nomenclature for Square Corner Easy Reach Cabinet (SCER36); now feature a knuckle hinge, see page 24 NEW PRODUCTS INCLUDED IN THIS GUIDE New SKU nomenclature for Oven Cabinet (OCSDD33, OCSD3390, OCSD3396), see pages Trim Moulding (MTW8, PSMTW8), see page 41 Wrapped Mouldings (PSMSW8, PSMCROWN8, PSMFOLCR8, PSMTCROWN8, PSMQR8), see pages Frame Spacers (HNGSPCRF, HNGSPCRF50), Hinge Spacers (HNGSPCRD, HNGSPCRD50), Restrictor Clips (HNGRESCLP), see page 50 DISCONTINUATIONS Last Order Date 1/29/2016 Square Corner Easy Reach Cabinet, SCER36PH, replaced with SCER36 Oven Cabinet (OC33, OC3390, OC3396), replaced with OCSD33, OCSD3390, OCSD3396

3 TABLE OF CONTENTS Product Description Index....2 Product Code Index....3 Characteristics of Wood....4 Characteristics of Laminate...4 Humidification Effects...4 Common Style Numbers...5 Door Styles/Door Style Numbers/Finish Availability Finish Descriptions & Process... 8 Construction Specifications...9 Wall Cabinets TABLE OF CONTENTS Wall Cabinets/Straight Wall Cabinets/Corner Base Cabinets Base Cabinets/Straight Base Cabinets/Sink Base Cabinets/Drawer...23 Base Cabinets/Corner Tall Cabinets Oven Cabinets Utility Cabinets Vanity Cabinets Vanity Base Cabinets/Straight...31 Vanity Base Cabinets/Sink Vanity Base Cabinets/Drawer...34 Universal Design Cabinets Universal Design Base Cabinets/Straight...35 Universal Design Base Cabinets/Sink...36 Universal Design Base Cabinets/Drawer...37 Universal Design Base Cabinets/Corner Universal Design Base Cabinets/Vanity...40 Mouldings/Trim/Fillers Panels Accessories and Parts Warped Door Policy/Cabinet Care Suggestions Policies/Information...53 Warranty

4 Description Code Page Description Code Page PRODUCT DESCRIPTION INDEX Base Cabinet B 19 Base Cabinet Universal Design B Base Cabinet w/double Doors Universal Design B..32.5DD 35 Base Cabinet w/full Height Doors Universal Design B..32.5FH 35 Base Cabinet w/full Height Double Doors Universal Design B..32.5DDFH 35 Base Cabinet w/full Height Doors 12 Deep B..FH Base Cabinet w/tray Divider B..TD 20 Base Corner Cabinets BC 26 Base Corner Cabinet Universal Design BC Base Corner Filler FBC 42 Base Wastebasket Cabinet BWB 20 Batten Moulding MBAT8 42 Cove Moulding MCV8 42 Crown Moulding MTCROWN8 41 Crown Moulding PureStyle PSMTCROWN8 41 Diagonal Corner Wall Cabinet DC 15 Door Spacer HNGSPCRD 50 Double Wastebasket Roll Out DWBR 49 End Panel w/stile - Aristex Laminate PEPR 43 Filler F 42 Frame Spacer HNGSPCRF 50 Full Overlay Crown Moulding MFOLCR8 41 Full Overlay Crown Moulding PureStyle PSMFOLCR8 41 Hinge Angle Restrictor Clip HNGRESCLP 50 Laminate End Panel EPA 45 Outside Corner Moulding MOCW8 41 Oven Cabinet OCSD 27 Pantry Roll Tray Kits UPK 48 Plywood End Panel w/stile PEPRPLY 43 Plywood End Panel w/stile PREPRPLY 43 Plywood Refrigerator End Panel w/stile PREPRP 43 Quarter Round Moulding MQR8 42 Quarter Round Moulding PureStyle PSMQR8 42 Refrigerator End Panel PREF 43 Refrigerator End Panel w/stile PREPR 43 Refrigerator Wall Cabinet RW 14 Removable Sink Base with Front Panel Cabinet RSB 21 Removal Sink Base with Front Panel Universal Design RSB Roll Tray Kits TKIT 48 Sink Base Cabinet SB 21 Sink Base Universal Design SB Sink End Panel Aristex Laminate PSFEP 43 Sink End Panel Plywood PSFEPPLY 43 Sink Front Universal Design SF Sink Unit Cabinet w/front Panel Universal Design SU Sink/Range Front SF 22 Sink Front Corner SFC 22 Square Corner/Base with Easy Reach Cabinet SCER 24 Square Corner/Base Roto Cabinet SCR 24 Square Corner/Base Roto Universal Design SCR Square Corner Wall Cabinet SC 17 Stock Panel Aristex Laminate PA 44 Stock Panel Plywood P 44 Stock Panel Plywood PP 44 Straight Valance V ST 43 Tall Crown Moulding MCROWN8 41 Tall Crown Moulding PureStyle PSMCROWN8 41 Tall Scribe Moulding MSW8 41 Tall Scribe Moulding PureStyle PSMSW8 41 Three Drawer Base Cabinet DB 23 Three Drawer Base Cabinet Universal Design DB Three Drawer Vanity Base Cabinet VDB 34 Toekick TOEKICK 46 Toekick Cap TKC 46 Toekick Plywood TOEKICKPLY 46 Touch-Up Kit TUKIT 49 Trim Moulding MTW8 41 Trim Moulding PureStyle PSMTW8 41 Utility Cabinet U 28 Utility Shelf Kits UKS 47 Vanity Base Cabinet VB 31 Vanity Drawer Trimmable VDT 34 Vanity Sink Base VSB 32 Vanity Sink Base Universal Design VSB Veneer End Panel EPV 44 Vanity Tapered End Panel VTEP 45 Wall Cabinet W 10 2

5 Code Description Page Code Description Page B Base Cabinet 19 B Base Cabinet Universal Design 35 B..32.5DD Base Cabinet w/double Doors Universal Design 35 B..32.5DDFH Base Cabinet w/full Height Double Doors Universal Design B..32.5FH Base Cabinet w/full Height Doors Universal Design 35 B..FH-12 Base Cabinet w/full Height Doors 12 Deep 19 B..TD Base Cabinet w/tray Divider 20 BC Base Corner Cabinets 26 BC Base Corner Cabinet Universal Design 39 BWB Base Wastebasket Cabinet 20 DB Three Drawer Base Cabinet 23 DB Three Drawer Base Cabinet Universal Design 37 DC Diagonal Corner Wall Cabinet 15 DWBR Double Wastebasket Roll Out 49 EPA Laminate End Panel 45 EPV Veneer End Panel 44 F Filler 42 FBC Base Corner Filler 42 HNGRESCLP Hinge Angle Restrictor Clip 50 HNGSPCRD Frame Spacer 50 HNGSPCRF Door Spacer 50 MBAT8 Batten Moulding 42 MCV8 Cove Moulding 42 MCROWN8 Tall Crown Moulding 41 MFOLCR8 Full Overlay Crown Moulding 41 MOCW8 Outside Corner Moulding 41 MQR8 Quarter Round Moulding 42 MSW8 Tall Scribe Moulding 41 MTCROWN8 Crown Moulding 41 MTW8 Trim Moulding 41 OCSD Oven Cabinet 27 PA Stock Panel Aristex Laminate 44 P Stock Panel Plywood 44 PP Stock Panel Plywood 44 PEPR End Panel w/stile - Aristex Laminate 43 PEPRPLY Plywood End Panel w/stile 43 PREF Refrigerator End Panel 43 PREPR Refrigerator End Panel w/stile PREPRP Plywood Refrigerator End Panel w/stile 43 PREPRPLY Plywood End Panel w/stile 43 PSFEP Sink End Panel Aristex Laminate 43 PSFEPPLY Sink End Panel Plywood 43 PSMTCROWN8 Crown Moulding PureStyle 41 PSMFOLCR8 Full Overlay Crown Moulding PureStyle 41 PSMQR8 Quarter Round Moulding PureStyle 42 PSMSW8 Tall Scribe Moulding PureStyle 41 PSMTCROWN8 Crown Moulding PureStyle 41 PSMTW8 Trim Moulding PureStyle 41 RSB Removable Sink Base with Front Panel Cabinet 21 RSB Removal Sink Base with Front Panel Universal Design 36 RW Refrigerator Wall Cabinet 14 SB Sink Base Cabinet 21 SB Sink Base Universal Design 36 SC Square Corner Wall Cabinet 17 SCER Square Corner/Base with Easy Reach Cabinet 24 SCR Square Corner/Base Roto Cabinet 24 SCR Square Corner/Base Roto Universal Design 38 SF Sink/Range Front 22 SF Sink Front Universal Design 36 SFC Sink Front Corner 22 SU Sink Unit Cabinet w/front Panel Universal Design 36 TKC Toekick Cap 46 TKIT Roll Tray Kits 48 TOEKICK Toekick 46 TOEKICKPLY Toekick Plywood 46 TUKIT Touch-Up Kit 49 U Utility Cabinet 28 UKS Utility Shelf Kits 47 UPK Pantry Roll Tray Kits 48 V ST Straight Valance 43 VB Vanity Base Cabinet 31 VDB Three Drawer Vanity Base Cabinet 34 VDT Vanity Drawer Trimmable 34 VSB Vanity Sink Base 32 VSB Vanity Sink Base Universal Design 40 VTEP Vanity Tapered End Panel 45 W Wall Cabinet 10 PRODUCT CODE INDEX 3

6 CHARACTERISTICS OF WOOD & LAMINATE / HUMIDIFICATION EFFECTS Characteristics of Wood No matter which wood type you choose for your new kitchen or bath cabinetry, please keep in mind that no two pieces of wood are exactly the same. Stains are likely to exaggerate the difference between open and closed grains and other markings in wood. Grain variation and color change should be expected. As hardwood ages, it will darken when exposed to different types of light. Color differences or changes in wood can also be caused by exposure to harsh chemicals, extreme heat, or other contributing external conditions. Additionally, wood species exhibit other defining characteristics, such as mineral deposits/streaks, knots, sap runs, pin holes, and wormholes. These markings make the wood unique and contribute to its enduring beauty. Characteristics of Laminates Oak Very strong wood with distinct grain patterns Grain variations create a color gradation when stain is applied Grain patterns include fine lines, pin stripes, leafy grains, and watery figures Birch Even-textured, fine-grained wood with a curly or wavy pattern Strong with a high resistance to abrasion Smooth, dense surface texture Tight wood grain appearance Thermofoil Doors & drawer fronts are shaped MDF core covered with a seamless vinyl laminate on face & edges, and a melamine laminate on back Vinyl laminate is applied to MDF with an adhesive using heat & pressure Creates a product with excellent wear and heat resistance properties midi cation Cabinet components are typically manufactured at a target range of 40% 50% relative humidity. This works well because even unhumidified homes stay between 20% and 70% in normal years with typical cooking and washing activities. In extremely cold, dry winters some doors can be exposed to conditions where relative humidity is below 20% for weeks at a time, causing shrinkage to occur. Conversely, where in-home relative humidity exceeds 70% for extended periods of time, expansion could occur. In certain geographic locations of the country, it is natural for the humidity to reach and remain at 80% for several weeks during the new construction period. Exposure to sustained conditions such as these could cause opening of the joints, and will not be considered as a reason for product replacement. Contractor's Choice recommends product be stored and installed in an atmosphere where the humidity level and temperature are controlled. Humidification Effects on a Door with a Miter Joint High Humidity Low Humidity Grain Direction Grain Direction Grain Direction Grain Direction When wood swells, miter joints open as shown above. When wood shrinks, miter joints open as shown above. 4 Steps Consumers Can Take To Protect Real Wood Furnishings Keep an eye on the humidity inside the home. Reasonably accurate digital thermometers-hygrometer units are available to measure humidity. Maintain the humidity at or above 20% when the temperature is below 20 degrees and over 35% when the temperature is above 20 degrees. Some ways this may be accomplished are installing a whole-house humidifier on the furnace, running a portable humidifier in key rooms, or placing pans of water near the heat registers. Don t over do it. Significant condensation on windows is a sign the humidity levels are too high for outside temperature conditions. Recognize that finished wood responds to humidity over a period of several days to several weeks. It takes time before the wood returns to normal after any correction to the environment.

7 and artia er a eci cations DOOR STYLES / COMMON STYLE NUMBERS Common Style Numbers for Finishes SPECIES FINISH COMMON STYLE NUMBER Oak Wheat 030 Thermofoil White** 031 Birch Autumn 032 Birch Rouge 034 Birch Saddle 036 Birch Sarsaparilla 035 Miscellaneous* N/A 011 * Use style number 011 for miscellaneous items such as pantry shelf kits, roll out kits, and double wastebasket roll out. ** White common styles will be painted white. 5

8 Albany DOOR STYLES DOOR STYLES drawer front profile door profile Species Birch FINISH AVAILABILITY Standard All Plywood Common Finish Construction Construction Style Autumn 11W 12W 032 Rouge 11Y 12Y 034 Saddle 11V 12V 036 Sarsaparilla 11Z 12Z 035 Full Overlay Flat Veneer Center Panel 3 /4" Thick Solid Birch Door Rail Hardware Recommended Square Base Square Wall Bartlett drawer front profile door profile FINISH AVAILABILITY Species Finish Standard Construction All Plywood Construction Common Style Thermofoil White 13E 14E /16" Overlay Raised Center Panel Thermofoil Heat Formed and Glued Over a 5 /8" MDF Core Beveled Edges on Outside of Door Frame and Drawer Front No Hardware Required Square Base Square Wall 6

9 Clarkson DOOR STYLES drawer front profile door profile Species Birch FINISH AVAILABILITY Standard All Plywood Common Finish Construction Construction Style Autumn 13K 14K 032 Rouge 13M 14M 034 Saddle 13V 14V 036 Sarsaparilla 13N 14N /16" Overlay Raised Veneer Center Panel 3 /4" Thick Solid Birch Door Rail Reverse Bevel Profile, No Hardware Required DOOR STYLES Square Base Square Wall Hammond drawer front profile FINISH AVAILABILITY Species Finish Standard Construction All Plywood Construction Common Style Oak Wheat 13B 14B /16" Overlay Flat Veneer Center Panel 3 /4" Thick Solid Oak Door Rail Reverse Bevel Profile, No Hardware Required door profile Square Base Square Wall Newberry drawer front profile Species Birch FINISH AVAILABILITY Standard All Plywood Common Finish Construction Construction Style Autumn 13F 14F 032 Rouge 13J 14J 034 Saddle 13H 14H 036 Sarsaparilla 13P 14P 035 door profile 7 /16" Overlay Flat Veneer Center Panel 3 /4" Thick Solid Birch Door Rail Reverse Bevel Profile, No Hardware Required Square Base Square Wall 7

10 Finish Descriptions Autumn Rouge FINISH NAME Mid-tone stain with warm, copper tones Traditional cinnamon red tones DESCRIPTION FINISH DESCRIPTIONS & PROCESS STAIN Saddle Sarsaparilla Wheat Medium, warm brown stain Rich, deep brown stain Light stain with golden undertones THERMOFOIL White A pure white color Finishing Process Contractor's Choice offers a variety of cabinet construction and finish options in order to allow for maximum design flexibility. Below are details about wood characteristics to assist you in deciding on a wood type and finish. The Contractor's Choice finishing process starts with top quality lumber that is sanded down to reach difficult areas before the doors are assembled. After assembly, each door is inspected before a toner is applied with a spray. After applying toner to each door, drawer front, and face frame, a layer of stain is added using a spray finish which is then hand rubbed into the wood for maximum penetration and long-lasting beauty. A UV sealer is then applied during the finishing process to fill the grain. Finally, a UV topcoat is applied onto the door, providing a protective layer and beautiful, lasting finish. A final inspection is given at the end of the process to ensure each door is ready for cabinet assembly. The finish you select for your door style is just as important as the wood type. Each piece of wood will react differently to the finish material used, resulting in a slight variation in shade within and between cabinets. When natural, light, or tinted finishes are applied, the natural grain characteristics are apparent. For easy care and lasting beauty, Contractor's Choice covers interior surfaces of cabinet walls, backs, and shelves with Aristex surface, a urethane-coated laminate. 8

11 Construction Speci cations CABINETS DRAWERS STANDARD ALL-PLYWOOD SIDES 3 /8" Thick Furniture Board with Matching Interior 3 /8" Thick Plywood, Laminated Interior and Exterior Sides BACK 3 /8" Thick Furniture Board 3 /8" Thick Plywood, Laminated Interior and Exterior Sides TOP & BOTTOM (Wall) 1 /2" Thick Furniture Board 1 /2" Thick Plywood BOTTOM (Base) 3 /8" Thick Furniture Board 3 /8" Thick Plywood, Laminated Interior and Exterior Sides CORNERS SHELVES (Wall & Tall) SHELVES (Base) TOEKICK Four Furniture Board Corner Braces 1 /2" Thick Furniture Board (15 pounds maximum weight per square foot) Fixed 1 /2" Thick Half-Depth Furniture Board. Adjustable 3 /4" Thick Full-Depth Furniture Board on Full Height Base Cabinets 3 /8" Thick x 4" High Furniture Board, Recessed 3 3 /8", Unfinished (Requires cover: TOEKICK/TOEKICK8) Two Plywood Stretcher Rails, except on B15FH-12, B18FH-12, B21FH-12, B24FH-12, B30FH-12, B36FH-12, VSB1816, which utilize corner braces 1 /2" Thick Plywood (15 pounds maximum weight per square foot) Fixed 1 /2" Thick Half-Depth Plywood. Adjustable 3 /4" Thick Full-Depth Plywood on Full Height Base Cabinets 3 /8" Thick x 4" High Plywood, Recessed 3 3 /8", Unfinished (Requires cover: TOEKICKPLY/TOEKICKPLY8) FACE FRAME (Wall) 3 /4" x 1 /2" Solid Wood 3 /4" x 1 /2" Solid Wood FACE FRAME (Base) 3 /4" x 1 /2" Solid Wood, 3" Center Stile 3 /4" x 1 /2" Solid Wood, 3" Center Stile INTERIOR COMPONENTS Aristex Maple Laminate (White style features Aristex White Laminate) Aristex Maple Laminate (White style features Aristex White Laminate) HINGES Adjustable, Fully Concealed, Steel Hinges Adjustable, Fully Concealed, Steel Hinges DRAWER BOX SIDES, BACK, & FRONT DRAWER BOTTOM DRAWER GUIDES 1 /2" Thick Furniture Board with Aristex Natural Maple Laminate 3 /8" Thick Furniture Board (Stapled into Sides, Front, & Back) Side-Mount Epoxy-Coated, Double Rails, Captured on Two Sides, Built-In Drawer Stop 1 /2" Thick Plywood 1 /4" Thick Plywood, Stapled into Sides, Front, & Back Side-Mount Epoxy-Coated, Double Rails, Captured on Two Sides, Built-In Drawer Stop BOX JOINT Stapled, Butt Joint Stapled, Butt Joint DEPTH 20" Deep Base, 18" Deep Vanity 20" Deep Base, 18" Deep Vanity CAPACITY Rated at 75 lbs. capacity per drawer for all guides Rated at 75 lbs. capacity per drawer for all guides CONSTRUCTION SPECIFICATIONS 9

12 WALL CABINETS STRAIGHT Shelves not available in cabinets less than 24" in height. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Shelves not available in cabinets less than 24" in height. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Wall Cabinets, High, Deep W W W ", 36", or 39" W3012-W3912 Wall Cabinets, 14" High, Deep W W W W W W ", or 24", 30", 33", 36", or 39" 14" 14" W2114-W2414 W3014-W3914 Shelves not available in cabinets less than 24" in height. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Wall Cabinets, 18" High, Deep W W W W W W W " or 24" 30", 33", 36", 39", or 42" 18" 18" W2118-W2418 W3018-W4218 Shelves not available in cabinets less than 24" in height. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Wall Cabinets, 18" High, 15" Deep W W " 30", or 36" 18" 10 W W361815

13 Wall Cabinets, 24" High, Deep W W W W W W W ", or 24" W2124-W " 30", 33", 36", 39", or 42" W3024-W4224 Wall Cabinets, 24" High, 15" Deep 24" W W " 30" or 36" W W " One adjustable shelf. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Center shelf support clip included on Wall Double Door cabinets with center mullion. Center shelf support clip included on Wall Double Door cabinets with center mullion. One adjustable shelf. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. WALL CABINETS STRAIGHT Wall Cabinets, 30" High, Deep W W W W W W W W W W W W W Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. W0930 cabinets have square doors. Center shelf support clip included on Wall Double Door cabinets with center mullion. 9",, 15", 18", 21", or 24" 27", 30", 33", 36", 39", 42", or 48" 30" 30" W0930-W2430 W2730-W

14 WALL CABINETS STRAIGHT Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. W0936 cabinets have square doors. Center shelf support clip included on Wall Double Door cabinets with center mullion. Wall Cabinets, 36" High, Deep W W W W W W W W W W W W W W ",, 15", 18", 21", or 24" 27", 30", 33", 36", 39", 42", 45", or 48" 36" 36" W0936-W2436 W2736-W4836 Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Center shelf support clip included on Wall Double Door cabinets with center mullion. Wall Cabinets, 36" High, 15" Deep W W W W " 15", 18", or 24" 36" 15" 30" 36" W W W

15 WALL CABINETS STRAIGHT Wall Cabinets, 42" High, Deep W W W W W W W W W W W W W W ",, 15", 18", 21", or 24" 27", 30", 33", 36", 39", 42", 45", or 48" Three adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. W0942 cabinets have square doors. Center shelf support clip included on Wall Double Door cabinets with center mullion. 42" 42" W0942-W2442 W2742-W4842 Wall Cabinets, 42" High, 15" Deep W W W W " 15", 18", or 24" 15" 30" Three adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. When varying heights, make sure to also vary depths to allow mouldings to lie against adjacent side of cabinet. Center shelf support clip included on Wall Double Door cabinets with center mullion. 42" 42" W W W

16 WALL CABINETS STRAIGHT Shelves not available in cabinets less than 24" in height Cabinets use standard natural maple interior, excluding white which has a white interior. Cabinets must be supported on three surfaces when mounted. When designing for built in refrigerators, be sure to use necessary filters to provide proper clearance. Refrigerator Wall Cabinets, High, 23 ¾" Deep RW RW ", or 39" RW3612-RW3912 Shelves not available in cabinets less than 24" in height Cabinets use standard natural maple interior, excluding white which has a white interior. Cabinets must be supported on three surfaces when mounted. When designing for built in refrigerators, be sure to use necessary filters to provide proper clearance. Refrigerator Wall Cabinets, 18" High, 23 ¾" Deep RW RW ", or 39" RW3618-RW " Shelves not available in cabinets less than 24" in height Cabinets use standard natural maple interior, excluding white which has a white interior. Cabinets must be supported on three surfaces when mounted. When designing for built in refrigerators, be sure to use necessary filters to provide proper clearance. Refrigerator Wall Cabinets, 24" High, 23 ¾" Deep RW RW ", or 39" 24" 14 RW3624-RW3924

17 Diagonal Corner Wall Cabinet, 24" High, Deep DC " /32" 24" /32" 8 1 /16" DC2424 TOP VIEW Diagonal Corner Wall Cabinet, 30" High, Deep DC " /32" 24" /32" 8 1 /16" 17 7 /8" 17 7 /8" One adjustable shelf. Cabinets use standard natural maple interior, excluding white which has a white interior. All Diagonal Wall cabinets must be attached to at least one run of cabinets and both back walls. All full overlay doors are smaller to allow for proper door opening. Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. All Diagonal Wall cabinets must be attached to at least one run of cabinets and both back walls. All full overlay doors are smaller to allow for proper door opening. WALL CABINETS CORNER DC2430 TOP VIEW Diagonal Corner Wall Cabinets, 36" High, & 15" Deep DC DC " 24" /32" 8 1 /16" 17 7 /8" 27" /64" 8 1 /16" 20 7 /8" Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. All Diagonal Wall cabinets must be attached to at least one run of cabinets and both back walls. All full overlay doors are smaller to allow for proper door opening /32" /32" DC2436 TOP VIEW 15" DC2736 TOP VIEW Diagonal Corner Wall Cabinets, 42" High, & 15" Deep DC DC " 24" /32" 8 1 /16" 17 7 /8" 27" /64" 8 1 /16" 20 7 /8" Three adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. All Diagonal Wall cabinets must be attached to at least one run of cabinets and both back walls. All full overlay doors are smaller to allow for proper door opening /32" /32" DC2442 TOP VIEW 15" DC2742 TOP VIEW 15

18 Wall Corner Cabinet Installation Charts Full Overlay Square Corner Wall Cabinet Information WALL CABINETS CORNER Full Overlay Styles Actual Cabinet Width X Y Z W Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet SC24 24" 1" 2 ½" 3 ¾" 1" 2 ½" 25" 27 ¾" SC30 30" 1" 2 ½ 3 ¾ 1" 2 ½ 31" 33 ¾" SC36 36" 1" 2 ½ 3 ¾ 1" 2 ½ 39" 39 ¾" SC42 42" 1" 2 ½ 3 ¾ 1" 2 ½ 43" 45 ¾" SC48 48" 1" 2 ½ 3 ¾ 1" 2 ½ 49" 51 ¾" 7 /16" Overlay Square Corner Wall Cabinet Information 7/16 Overlay Styles Actual Cabinet Width X Y Z W Max. Pull From Wall To End of Cabinet Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet SC24 24" ½" 2" 3 ¾" ½" 2" 24 ½" 27 ¾" SC30 30" ½" 2" 3 ¾" ½" 2" 30 ½" 33 ¾" SC36 36" ½" 2" 3 ¾" ½" 2" 36 ½" 39 ¾" SC42 42" ½" 2" 3 ¾" ½" 2" 42 ½" 45 ¾" SC48 48" ½" 2" 3 ¾" ½" 2" 48 ½" 51 ¾" Max. Pull From Wall To End of Cabinet Square Corner Wall Door and Opening Sizes W SKU 7 /16" Overlay Door Full Overlay Door Door Opening SC /8" x 21 7 /8" 17 ½" x 23 ½" 15" x 21" SC /8 x 21 7 /8 23 ½ x 23 ½ 21" x 21" SC /8 x 27 7 /8 11 ½ x 29 ½ 9" x 27" SC /8 x 27 7 /8 17 ½ x 29 ½ 15" x 27" SC /8 x 27 7 /8 23 ½ x 29 ½ 21" x 27" FF Wall Corner Cabinet FF Blind Opening Mullion Door Opening Z Adjacent Wall Cabinet X Y SC /8 x 27 7 /8 14 ½ x 29 ½ x 27" SC /8 x 27 7 /8 17 ½ x 29 ½ 15" x 27" SC /8 x 33 7 /8 11 ½ x 35 ½ 9" x 33" SC /8 x 33 7 /8 17 ½ x 35 ½ 9" x 33" SC /8 x 33 7 /8 23 ½ x 35 ½ 18" x 33" SC /8 x 39 7 /8 11 ½ x 41 ½ 9" x 39" SC /8 x 39 7 /8 17 ½ x 41 ½ 15" x 39" SC /8 x 39 7 /8 23 ½ x 41 ½ 21" x 39" Blind Opening Door Opening Mullion 16 Cabinet Width

19 Square Corner Wall Cabinets, 24" High, Deep SC SC " 6" 30", or 36" SC3024-SC " TOP VIEW SC (RIGHT) TOP VIEW SC (LEFT) One adjustable shelf. Cabinets use standard natural maple interior, excluding white which has a white interior. 3" Filler is included. Hinging determines location of the blind. Door attaches to the blind panel. Cabinets are reversible. Cover panel shipped with cabinet for field installation to cover 6" blind opening. Reference Installation Charts for proper sizing identification, see page 14. WALL CABINETS CORNER Square Corner Wall Cabinets, 30" High, Deep SC SC SC SC SC " 6" 24", 30", or 36" 30" TOP VIEW SC (RIGHT) TOP VIEW SC (LEFT) Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. 3" Filler is included. Hinging determines location of the blind. Door attaches to the blind panel. Cabinets are reversible. Cover panel shipped with cabinet for field installation to cover 6" blind opening. Reference Installation Charts for proper sizing identification, see page 14. SC2430-SC " or 48" 6" 6" 30" TOP VIEW SC (RIGHT) TOP VIEW SC (LEFT) SC4230-SC

20 WALL CABINETS CORNER Two adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. 3" Filler is included. Hinging determines location of the blind. Door attaches to the blind panel. Cabinets are reversible. Cover panel shipped with cabinet for field installation to cover 6" blind opening. Reference Installation Charts for proper sizing identification, see page 14. Square Corner Wall Cabinets, 36" High, Deep SC SC SC " 6" 24", 30", or 36" SC2436-SC " TOP VIEW SC (RIGHT) TOP VIEW SC (LEFT) Three adjustable shelves. Cabinets use standard natural maple interior, excluding white which has a white interior. 3" Filler is included. Hinging determines location of the blind. Door attaches to the blind panel. Cabinets are reversible. Cover panel shipped with cabinet for field installation to cover 6" blind opening. Reference Installation Charts for proper sizing identification, see page 14. Square Corner Wall Cabinets, 42" High, Deep SC SC SC ", 30", or 36" 6" 42" 6" SC2442-SC3642 TOP VIEW SC (RIGHT) TOP VIEW SC (LEFT) 18

21 Base Cabinets, High, 23 ¾" Deep B B B B B B B09 is a full height cabinet with one door. Includes one fixed ½" thick, half depth shelf. B B B B B B B B ", 15", 18", 21", or 24" 27" 30", 33", 36", 39", 42", 45", or 48" BASE CABINETS STRAIGHT B09 B12-B24 B27 B30-B48 Base Cabinets with Full Height Doors, High, Deep B15FH B18FH B21FH B24FH Includes one ¾" full-depth adjustable shelf. B30FH B36FH ", 18", 21", or 24" 30" or 36" B15FH-12-B24FH-12 B30FH-12-B36FH-12 19

22 B09TD is a Full Height door and includes an installed chrome tray divider Base Cabinet with Tray Divider, High, 23 ¾" Deep NEW B09TD " BASE CABINETS STRAIGHT B09TD Includes two 35-quart Pull-Out wastebaskets on Full Extension guides. Natural Maple wastebasket support. Base Wastebasket, High, 23 ¾" Deep BWB " BWB18 20

23 BASE CABINETS SINK Sink/Range Bases, High, 23 ¾" Deep SB SB SB SB SB SB SB SB SB " 24" 22" 27" 25" 22" = False Panel It may be necessary to modify the corner braces/stretcher rails with some sink applications. Shelves not included. SB24 SB27 30", 33", 36", 39", 42", or 48" 28", 31", 34", 37", 40", or 46" 38" 22" 22" SB30-SB48 SB60 Removable Sink Bases with Front Panel, High, 23 ¾" Deep RSB RSB Top false panel section attaches to adjacent cabinets, while bottom section and floor are removable for accessibility. 6 3 /4" 28 1 /4" RSB30-RSB36 21

24 BASE CABINETS SINK Sink Base floor included with all units. Trimmable 3" each side on partial overlay styles. Not trimmable on full overlay styles. Sink/Range Fronts, High SF SF " or 36" 30" 36" SF30-SF36 FULL OVERLAY SF30 PARTIAL OVERLAY SF36 PARTIAL OVERLAY Sink Base floor included with all units. Toekick is not attached, ships loose. For sufficient dishwasher door clearance and loading/unloading space, a 15" wide base cabinet is recommended for use between sink base diagonal corner cabinet and dishwasher. Floor dimensions: SFC36 3 /8" x 36" x 36" SFC42 3 /8" x 42" x 42" Sink Front Corners, High SFC SFC " or 42" SFC36-SFC42 Wall Width Max. Sink Width SFC36 36" x 36" " SFC42 42" x 42" " 36" 36" 42" 42" /32" 40 9 /64" /64" /64" 17 5 /16" 18 3 /8" SFC36 TOP VIEW /16" 26 7 /8" SFC42 TOP VIEW 22

25 Three Drawer Bases, High, 23 ¾" Deep DB DB DB DB DB DB DB DB12-DB36, 15", 18", 21" 24", 30", or 36" Raised panel style drawer fronts will convert to raised panel: Full Overlay 10 ¼" or higher Partial Overlay 9 7 /8" or higher Standard construction features side-mount Full Extension guides on bottom two drawers. Does not feature Smart Stop. All-Plywood features undermount Full Extension Smart Stop guides on bottom two drawers. BASE CABINETS DRAWER 23

26 One knuckle hinge door. Includes magnetic catch. Decorative hardware must be countersunk to prevent scratching of adjacent cabinets and face frame of SCER. Square Corner Easy Reach Cabinet, High, 23 ¾" Deep SCER36 NEW " 36" 21 7 /8" 20 3 /16" BASE CABINETS CORNER SCER /64" TOP VIEW One rotating door. Two rotating white shelves. Nominal gap of ¼" on all sides of door. 27" diameter shelf and holds 60 lbs. per shelf When ordering All-Plywood construction, top and bottom will utilize plywood, but drum material does not change. Square Corner Roto, High SCR /32" 6 15 /64" /32" /32" 29 7 /8" 12 1 /4" 12 1 /4" SCR36 SCR36 TOP VIEW 24

27 Base Corner Cabinet Installation Charts Full Overlay Base Corner Cabinet Information Full Overlay Styles Actual Cabinet Width X Y Z W Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet BC36 27" 9 ¾" 11 ¼" 12 ½" 1" 2 ½" 36 ¾" 39 ½" BC42 36" 3 ¾" 5 ¼" 9 ½" 1" 2 ½" 39 ¾" 45 ½" BC48 45" 0" ¾" 5" 1" 2 ½" 45" 50" BC51 48" 0" 0" 3 ½" 1" 2 ½" 48" 51 ½" 7 /16" Overlay Base Corner Cabinet Information 7/16 Overlay Styles Actual Cabinet Width X Y Z W Max. Pull From Wall To End of Cabinet Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet BC36 27" 9 ¼" 10 ¾" 12 ½" ½" 2" 36 ¼" 39 ½" BC42 36" 3 ¼" 4 ¾" 9 ½" ½" 2" 39 ¼" 45 ½" BC48 45" 0" ¼" 5" ½" 2" 45" 50" BC51 48" 0" 0" 3 ½" ½" 2 48" 51 ½" Max. Pull From Wall To End of Cabinet BASE CABINETS CORNER Base Corner Door, Drawer Front and Opening Sizes SKU 7 /16" Overlay Door 7 /16" Overlay Drawer Front Full Overlay Door Full Overlay Door Drawer Front Door Opening Drawer Opening BC /8" x 22 7 /8" 9 7 /8" x 5 1 /8" 11 ½" x 24 1 /8" 11 ½" x 5 ¾" 9" x 22" 9" x 4 ½" BC /8 x 22 7 / /8 x 5 1 /8 14 ½" x 24 1 /8" 14 ½" x 5 ¾" x 22" x 4 ½" BC /8 x 22 7 / /8 x 5 1 /8 19" x 24 1 /8" 19" x 5 ¾" 16 ½" x 22" 16 ½" x 4 ½" BC /8 x 22 7 / /8 x 5 1 /8 20 ½" x 24 1 /8" 20 ½" x 5 ¾" 18" x 22" 18" x 4 ½" W FF Base Corner Cabinet Blind Opening Mullion FF X Y DWR Opening Mullion DWR Opening Door Opening Adjacent Base Cabinet Z Door Opening Door Opening Cabinet Width 25

28 BASE CABINETS CORNER Half-Depth fixed shelf included. All Base Corner cabinets are reversible from left blind to right blind. 3" Filler is included with all Base Corner cabinets and shipped under the Toekick or in the cabinet. To ensure proper door/drawer clearance, it is recommended you do not install appliances next to the blind. One door and one drawer Cabinets are designed to use the same amount of wall space designated in the SKU nomenclature. Cover panel shipped with cabinet for field installation to cover blind opening. Reference Installation Charts for proper size and identification. See page 23. Base Corner Cabinets, High, 23 ¾" Deep BC BC BC BC " 6" 9" BC36 45" 9" BC42 36" 48" 9" 16 1 /2" 9" 18" BC48 BC51 26

29 Oven Cabinet, 84" High, 23 ¾" Deep OCSD33 NEW " OC33 84" 10 1 /2" 24" 27" 8" 41/2" 41/2" 41/2" Toekick 4" OC33 15" Frame Opening Height Max Cut-out 31 1 /2" x 59" (Shaded) Two doors and three drawers. Oven shelf support kit included. Shelves not available on this cabinet. Back of cabinet scored for easy back removal if needed when oven used is deeper than cabinet can accommodate. Cabinet features concealed face mount hinges. TALL CABINETS Oven Cabinet, 90" High, 23 ¾" Deep OCSD3390 NEW " OC " 10 1 /2" 24" 27" 8" 41/2" 41/2" 41/2" Pedestal OC " Frame Opening Height Max Cut-out 31 1 /2" x 59" (Shaded) Two doors and three drawers. Oven shelf support kit included. All 90" cabinets are shipped as an 86" cabinet with unfinished Loose Toekick Sub Assembly unattached. Additional material may be needed to cover unfinished Loose Toekick Sub Assembly. Refer to Loose Toekick Sub Assembly Installation Instructions for cabinet installation. Shelves not available on this cabinet. Back of cabinet scored for easy back removal if needed when oven used is deeper than cabinet can accommodate. Cabinet features concealed face mount hinges. 27

30 TALL CABINETS Two doors and three drawers. Oven shelf support kit included. All 96" cabinets are shipped as an 92" cabinet with unfinished Loose Toekick Sub Assembly unattached. Additional material may be needed to cover unfinished Loose Toekick Sub Assembly. Refer to Loose Toekick Sub Assembly Installation Instructions for cabinet installation. Shelves not available on this cabinet. Back of cabinet scored for easy back removal if needed when oven used is deeper than cabinet can accommodate. Cabinet features concealed face mount hinges. Oven Cabinet, 96" High, 23 ¾" Deep OCSD3396 NEW " OC " 10 1 /2" 24" 27" 8" 41/2" 41/2" 41/2" Pedestal OC3396(B) 27" Frame Opening Height Max Cut-out 31 1 /2" x 59" (Shaded) 84" high Utility cabinets include one fixed shelf between doors. Shelves not included in Utility cabinets. For shelf and Roll Tray options see pages Utility Cabinet, 84" High, Deep U " 84" U

31 Utility Cabinets, 84" High, 23 ¾" Deep U U U U " high Utility cabinets include one fixed shelf between doors. Shelves not included in Utility cabinets. For shelf and Roll Tray options see pages ", 18", or 24" 30" 84" 84" TALL CABINETS U15-U24 U30 Utility Cabinets, 90" High, 23 ¾" Deep U U U U ", 18", or 24" 30" 90" high Utility cabinets include one fixed shelf between doors. Shelves not included in Utility cabinets. For shelf and Roll Tray options see pages All 90" high Utility cabinets are shipped as an 86" cabinet with unfinished Loose Toekick Sub Assembly. Additional material may be needed to cover unfinished Loose Toekick Sub Assembly. Refer to Loose Toekick Sub Assembly Installation Instructions for cabinet installation. 90" 90" U1590-U2490 U

32 TALL CABINETS 96" high Utility cabinets include one fixed shelf between doors. Shelves not included in Utility cabinets. For shelf and Roll Tray options see pages All 96" high Utility cabinets are shipped as an 92" cabinet with unfinished Loose Toekick Sub Assembly. Additional material may be needed to cover unfinished Loose Toekick Sub Assembly. Refer to Loose Toekick Sub Assembly Installation Instructions for cabinet installation. Utility Cabinets, 96" High, 23 ¾" Deep U U U U ", 18", or 24" 96" 30" 96" U1596-U2496 U

33 VANITY CABINETS STRAIGHT Vanity Bases, 30" High, 21" Deep VB VB VB VB Half-depth fixed shelf. 21", 15", 18", or 21" 30" VB12-VB21 31

34 VANITY CABINETS SINK 16" wide and 14" deep space for sink opening. One full height door. 16" deep Vanities available in standard construction only. It may be necessary to modify the corner braces with some sink applications. Vanity Sink Base, 30" High, 18" Wide, 16" Deep VSB " 16" 18" 14" 30" VSB1816 = False Panel. It may be necessary to modify the corner braces/stretcher rails with some sink applications. Vanity Sink Bases, 30" High, 21" Deep VSB VSB VSB VSB VSB VSB VSB VSB VSB " 21" 19" 21" 24" 22" 21" 27" 25" 19" 19" 19" 30" 30" 30" VSB21 VSB24 VSB27 21" 28" or 31" 21" 18 1 /2", or 21 1 /2" 21" 48", or 60" 26" (48") or 32" (60") 19" 19" 30" 30" VSB30-VSB33 V SB36-VSB42 VSB48-VSB60 32

35 Vanity Sink Bases, High, 21" Deep VSB VSB VSB VSB VSB VSB VSB = False Panel. It may be necessary to modify the corner braces/stretcher rails with some sink applications. VSB VSB " 21" 19" 21" 24" 22" 21" 27" 25" 19" 19" 19" 21" VANITY CABINETS SINK VSB " or 31" 19" 21" VSB /2", or 21 1 /2" 19" 21" VSB " or 60" 26" (48") or 32" (60") 19" VSB3035-VSB3335 VSB3635-VSB4235 VSB4835-VSB

36 VANITY CABINETS DRAWER The bottom drawer box is 6 3 /8" high for standard and 7 ¾" high for All-Plywood. Raised panel style drawer fronts will convert to raised panel: Full Overlay 10 ¼" or higher Partial Overlay 9 7 /8" or higher Vanity Three Drawer Bases, 30" High, 21" Deep VDB VDB VDB ", 15", or 18" 30" VDB12-VDB18 The bottom drawer box is 6 3 /8" high for standard and 7 ¾" high for All-Plywood. Raised panel style drawer fronts will convert to raised panel: Full Overlay 10 ¼" or higher Partial Overlay 9 7 /8" or higher Vanity Three Drawer Bases, High, 21" Deep VDB VDB ", or 18" VDB1235-VDB1835 Cabinets may not feature matching exterior laminate, so installation between two adjacent cabinets, walls, and/or panels is recommended. Face Frame trimmable 3" overall, 1 ½" on each side. Not available in All-Plywood construction. Vanity Drawers Trimmable, 21" Deep (Trimmable 3") VDT VDT " 21" 30" 33" VDT /4" VDT /4" 34

37 Base Cabinets, 32 ½" High, 23 ¾" Deep B B B B Includes one ¾" full depth adjustable shelf. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". B2432.5DD B B B B B , 15", 18" or 21" 24" 27" 30", 33", 36", or 48" 32 1 /2" 32 1 /2" 32 1 /2" 32 1 /2" B B B2432.5DD B B B Base Cabinets with Full Height Doors, 32 ½" High, 23 ¾" Deep B2432.5DDFH B3032.5FH " 32 1 /2" 30" 32 1 /2" Includes one ¾" full depth adjustable shelf. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". UNIVERSAL DESIGN CABINETS STRAIGHT B2432.5DDFH B3032.5FH 35

38 = False Panel It may be necessary to modify the corner braces with some sink applications. Shelves not included. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". Sink Base Cabinets, 32 ½" High, 23 ¾" Deep SB SB " or 36" 32 1 /2" SB SB Top false panel section attaches to adjacent cabinets, while bottom section and floor are removable for accessibility. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". Removable Sink Bases with Front Panel, 32 ½" High, 23 ¾" Deep RSB RSB "-36" 6 3 /4" UNIVERSAL DESIGN CABINETS SINK = False Panel Sink Base floor included with all units. Trimmable 3" each side on partial overlay styles. Not trimmable on full overlay styles. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34" /4" RSB RSB Sink Front, 32 ½" High SF " 32 1 /2" SF " and 32" wide and 16 ½" deep space for sink opening. Shipped unassembled. Removable front panel. Do not use or install as a free standing unit. It may be necessary to modify the corner braces in some sink applications. Not available in All-Plywood Construction. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". Sink Unit Cabinets with Front Panel, 32 ½" High SU SU /2" 10 3 /8" 26" or 32" 28 1 /2" 13 3 /8" SU SU /2"

39 Three Drawer Base Cabinets, 32 ½" High, 23 ¾" Deep DB DB DB DB Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34"., 15", 18", or 24" 32 1 /2" DB DB UNIVERSAL DESIGN CABINETS DRAWER 37

40 One rotating door. Two rotating 27" diameter white shelves with a 60 lb. load capacity per shelf. Nominal gap of ¼" on all sides of door. 27" diameter shelf and holds 60 lbs. per shelf When ordering All-Plywood construction, top and bottom will utilize plywood, but drum material does not change. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". Square Corner Base Roto Cabinet, 32 ½" High SCR /32" 6 15 /64" /32" /2" 23 /32" 29 7 /8" 12 1 /4" 12 1 /4" SCR TOP VIEW Universal Base Corner Cabinet Installation Charts UNIVERSAL DESIGN CABINETS CORNER Full Overlay Universal Base Corner Cabinet Information Full Overlay Styles Actual Cabinet Width X Y Z W Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet BC " 9 ¾" 11 ¼" 12 ½" 1" 2 ½" 36 ¾" 39 ½" BC " 3 ¾" 5 ¼" 9 ½" 1" 2 ½" 39 ¾" 45 ½" BC " 0" ¾" 5" 1" 2 ½" 45" 50" 7 /16" Overlay Universal Base Corner Cabinet Information 7/16 Overlay Styles Actual Cabinet Width X Y Z W Max. Pull From Wall To End of Cabinet Min. Pull Min. Pull w/hardware Max. Pull Min. Filler Required Min. Filler Required w/ Hardware Min. Pull From Wall To End of Cabinet BC " 9 ¼" 10 ¾" 12 ½" ½" 2" 36 ¼" 39 ½" BC " 3 ¼" 4 ¾" 9 ½" ½" 2" 39 ¼" 45 ½" BC " 0" ¼" 5" ½" 2" 45" 50" FF Mullion W Base Corner Cabinet Blind Opening FF X Y DWR Opening Mullion DWR Opening Max. Pull From Wall To End of Cabinet Door Opening Adjacent Base Cabinet Z Door Opening Door Opening 38 Cabinet Width

41 UNIVERSAL DESIGN CABINETS CORNER Base Corner Cabinets, 32 ½" High, 23 ¾" Deep BC BC BC " 6" 9" BC " 16 1 /2" BC " 32 1 /2" 32 1 /2" 9" BC " 32 1 /2" Half-Depth fixed shelf included. All Base Corner cabinets are reversible from left blind to right blind. 3" Filler is included with all Base Corner cabinets and shipped under the Toekick or in the cabinet. To ensure proper door/drawer clearance, it is recommended you do not install appliances next to the blind. One door and one drawer Cabinets are designed to use the same amount of wall space designated in the SKU nomenclature. Cover panel shipped with cabinet for field installation to cover blind opening. Reference Installation Charts for proper size and identification. See page 36. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". 39

42 UNIVERSAL DESIGN CABINETS VANITY = False Panel It may be necessary to modify the corner braces in some sink applications. VSB has butt doors on all door styles. Recommended for use in kitchen designs for ADA compliance with a maximum installed height of 34". Vanity Sink Bases, 32 ½" High, 21" Deep VSB VSB VSB VSB VSB VSB VSB VSB " 24" 22" 21" 27" 25" 21" 28" or 31" 19" 19" 19" 32 1 /2" 32 1 /2" 32 1 /2" VSB VSB VSB VSB " 19" V SB VSB /2", or 21 1 /2" 32 1 /2" 21" 48" or 60" 26" (48") or 32" (60") 19" VSB VSB /2" 40

43 COMMON STYLE Oak Finish Birch Finish White Finish Scribe Moulding, 8' Long MSW PSMSW8 NEW 0.5 n/a n/a 19 1 /4" 3 /4" MSW8 or PSMSW8 Outside Corner Moulding - 90 MOCW /4" Use to create a finished look on the ends of cabinet runs. MOULDINGS AND TRIM 3 /4" 1 /4" MOCW8 Trim Moulding MTW PSMTW8 0.5 n/a n/a 70 NEW Use to create a finished look on the ends of cabinet runs. 1" 3 /4" MTW8 or PSMTW8 Crown Mouldings MCROWN PSMCROWN8 NEW 0.5 n/a n/a 97 MFOLCR PSMFOLCR8 NEW 1.0 n/a n/a 142 MTCROWN PSMTCROWN8 NEW 0.8 n/a n/a 233 Remember to order extra Mouldings when working with mitered corners. At minimum, leave a 3" reveal at the end of a run to allow Moulding and countertop ample clearance to return back to the wall. 2 3 /8" 1 7 /16" 3 /4" 3 17 /32" 1 3 /4" 1 3 /4" 3" 1 3 /4" MCROWN8 or PSMCROWN8 MFOLCR8 (Full Overlay) or PSMFOLCR8 (Full Overlay) MTCROWN8 (Tall) or PSMTCROWN8 (Tall) Finished edges indicated by bold lines on side view drawings. 41

44 COMMON STYLE Oak Finish Birch Finish White Finish Cove Moulding MCV MOULDINGS AND TRIM 3 /4" 3 /4" MCV8 Quarter Round Moulding MQR PSMQR8 NEW 0.5 n/a n/a /16" 3 /16" 11 /16" MQR8 or PSMQR8 Batten Moulding MBAT /4" 13 /16" MBAT8 All Fillers are ¾" thick. F14X96 is ¼" thick. Designed to fill space between adjacent cabinets. Finished on ¼" front and ¾" all edges (backs are not finished). Fillers F14X FBC3X F F F F F F F /4" 3" 6" 96" 32 1 /2" 31" 42" 80" or 96" 31" 42" or 96" 1/4" 42 F14X96 FBC3X332.5 Finished edges indicated by bold lines on side view drawings. F331-F396 F631-F696

45 COMMON STYLE Oak Finish Birch Finish White Finish Valances Straight, 5" High V549ST V573ST Panels V549ST-V573ST Model Length V549ST 49" V573ST 73" PEPR PEPR PEPRPLY PEPRPLY PREF PREF PREPRP PREPRP PREPR PREPRPLY PSFEP PSFEPPLY ¾" thick Valances are not finished on back or ends. Plywood may contain MDF or particleboard in its core in accordance with ANSI/HPVA HP-1 standards. PREPRP1.584 and PREPRP1.596 will be laminate when ordered in White and Antique styles. MOULDINGS AND TRIM 30" 84" or 96" 84" or 96" 96" 24" 1 1 /2" 3" 3 /4" 1 1 /2" 3" 3 /8" PEPR1.535 PEPRPLY1.535 PEPR335 PEPRPLY335 PREF2384 PREF2396 PREPRP1.584 PREPRP1.596 PREPR33096 PREPRPLY33096 PSFEP PSFEPPLY Panel Description Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish PEPR1.535 Aristex 3 /8" End Panel w/1 ½" Stile 1½ x 23¾ x 35 Front Long Exterior Interior Laminate PEPR335 Aristex 3 /8" End Panel w/3" Stile 3 x 23¾ x 35 Front Long Exterior Interior Laminate PEPRPLY1.535 Plywood 3 /8" End Panel w/1 ½" Stile 1½ x 23¾ x 35 Front Long Exterior Interior Veneer PEPRPLY335 Plywood 3 /8" End Panel/ Stile 3 x 23¾ x 35 Front Long Exterior Interior Veneer Complete PREF2384 Particleboard Refrigerator End Panel ¾ x 23¾ x 84 1 Long Exterior Exterior Veneer PREF2396 Particleboard Refrigerator End Panel ¾ x 23¾ x 96 1 Long Exterior Exterior Veneer PREPRP1.584 Plywd. 3 /8" Refrigerator End Panel 1½ x 23¾ x 84 Front Long Exterior Exterior Veneer w/1 ½" Stile PREPRP1.596 Plywd. 3 /8" Refrigerator End Panel 1½ x 23¾ x 96 Front Long Exterior Exterior Veneer w/1 ½" Stile PREPR33096 Veneered Furniture Board 3 x 30 x 96 Front Long Exterior Exterior Veneer Refrigerator ¾" End Panel w/3" Stile PREPRPLY33096 Plywood ¾" End Panel w/3" Stile 3 x 30 x 96 Front Long Exterior Exterior Veneer PSFEP Aristex Sink End Panel 3 /8 x 24 x 35 None Exterior Interior Laminate PSFEPLY Aristex Sink End Panel 3 /8 x 24 x 35 None Exterior Interior Laminate 43

46 COMMON STYLE Oak Finish Birch Finish White Finish Stock Panels MOULDINGS AND TRIM Plywood may contain MDF or particleboard in its core in accordance with ANSI/HPVA HP-1 standards. PA PA PP n/a P P " 48" GRAIN DIRECTION 96" 96" GRAIN DIRECTION 36" GRAIN DIRECTION PA4836 P4836 A4896 P P4896 PP9635 Panel Descriptions Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish PA4836 Stock Panel - Aristex Laminate ¼ x 48 x 36 None Exterior Raw Laminate PA4896 Stock Panel - Aristex Laminate ¼ x 48 x 96 None Exterior Raw Laminate PP9635 Stock Panel - Veneer 3 /16 x 96 x 35 None Exterior Raw Veneer P4836 Stock Panel - Veneer 3 /16 x 48 x 36 None Exterior Raw Veneer P4896 Stock Panel - Veneer 3 /16 x 48 x 96 None Exterior Raw Veneer End Panels are shipped one per carton. Not sold in pairs. EPV1442 are sized for 15" deep cabinets Plywood may contain MDF or particleboard in its core in accordance with ANSI/HPVA HP-1 standards. Veneer End Panels EPV EPV EPV EPV EPV EPV /4", 14 1 /4", or 23" 30" - 96" EPV Panel Descriptions Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish EPV1130 Wall End Panel for Depth 3 /16 x 11¼ x 30 None Exterior Raw Veneer EPV1142 Wall End Panel for Depth 3 /16 x 11¼ x 42 None Exterior Raw Veneer EPV1442 Wall End Panel for 15" Depth 3 /16 x 14¼ x 42 None Exterior Raw Veneer EPV2335 Base End Panel 3 /16 x 23 x 35 None Exterior Raw Veneer EPV2384 Utility End Panel 3 /16 x 23 x 84 None Exterior Raw Veneer 44 EPV2396 Utility End Panel 3 /16 x 23 x 96 None Exterior Raw Veneer

47 COMMON STYLE Oak Finish Birch Finish White Finish Laminate End Panels EPA EPA EPA EPA EPA EPA /4", 14 1 /4", or 23" 30" - 96" EPA Panel Description Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish EPA1130 Wall End Panel for Depth 3 /16 x 11¼ x 30 None Exterior Raw Laminate EPA1142 Wall End Panel for Depth 3 /16 x 11¼ x 42 None Exterior Raw Laminate EPA1442 Wall End Panel for 15" Depth 3 /16 x 14¼ x 42 None Exterior Raw Laminate EPA2335 Base End Panel 3 /16 x 23 x 35 None Exterior Raw Laminate EPA2384 Utility End Panel 3 /16 x 23 x 84 None Exterior Raw Laminate EPA2396 Utility End Panel 3 /16 x 23 x 96 None Exterior Raw Laminate ¼" thick panels with one-sided Aristex Laminate on exterior (no edge finish) End Panels are shipped one per carton. Not sold in pairs. EPA1442 are sized for 15" deep cabinets. MOULDINGS AND TRIM Vanity Tapered End Panel, 30" High VTEP " 21" ¾" thick Veneer panel with front edge banded and both sides finished. 30" 7 1/2" 13 1/2" VTEP 45

48 COMMON STYLE MOULDINGS AND TRIM Oak Finish Birch Finish White Finish Plywood may contain MDF or particleboard in its core in accordance with ANSI/HPVA HP-1 standards. Toekicks TOEKICK (4-8' pc) TOEKICKPLY (4-8' pc) TOEKICK8 (1-4' pc) TOEKICKPLY8 (1-4' pc) " 96" TOEKICK Panel Description Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish TOEKICK8 Aristex Toekick ¼ x 4 x 96 None Exterior Raw Laminate TOEKICKPLY8 Plywood Toekick ¼ x 4 x 96 None Exterior Raw Veneer TOEKICK Aristex Toekick ¼ x 4 x 96 None Exterior Raw Laminate TOEKICKPLY Plywood Toekick ¼ x 4 x 96 None Exterior Raw Veneer TKC dimension: ¾ x 4 x ¾ Sold in pairs Toekick Cap TKC /16" 3 /4" 3 /4" TKC 46

49 Miscellaneous Style (#010) Dimensions Natural Maple Laminate White Laminate Plywood Fits Deep Fits 24" Deep Utility Shelf Kits UKS ½" x 22 ½" UKS15WH ½" x 22 ½" UKS15PL ½" x 22 ½" UKS15WHPL ½" x 22 ½" UKS ½" x / 32" UKS1812WH ½" x / 32" UKS1812PL ½" x / 32" UKS1812WHPL ½" x / 32" UKS ½" x 22 ½" UKS18WH ½" x 22 ½" UKS18PL ½" x 22 ½" UKS18WHPL ½" x 22 ½" UKS ½" x 22 ½" UKS24WH ½" x 22 ½" UKS24PL ½" x 22 ½" UKS24WHPL ½" x 22 ½" UKS ½" x 22 ½" UKS30WH ½" x 22 ½" UKS30PL ½" x 22 ½" UKS30WHPL ½" x 22 ½" Utility Shelf Kits contain two shelves and eight clips. Shelves are ¾" thick Maximum weight per square foot is 15 lbs. Utility Shelf Kits are natural maple laminate or specify UKS WH for white. Order under style 011. ACCESSORIES AND PARTS Utility Shelf Kit Shelves Utility Shelf Kit Clips 47

50 ACCESSORIES AND PARTS Miscellaneous Style (#010) Recommended Width of Face Frame Opening Trays Track Slides Mounting Blocks 2½" Wood Screws 5 /8" Wood Screws 1 /8 Spacers Miscellaneous Style (#010) Dimensions Natural Maple Laminate White Laminate Thickness Pantry Roll Tray Kits feature ½" thick solid wood front and furniture board sides and back, or specify UPK WH for white. Pantry Roll Tray Kits contain four trays, eight suspension tracks, and eight bumper pads with installation screws. Maximum weight per square foot is 15 lbs. Pantry Roll Tray Kits cannot be used in any Utility Cabinet deep. Order under style 011. Pantry Roll Tray Kits UPK / 16" x 20 3 / 16" 3 1 / 8" UPK18WH / 16" x 20 3 / 16" 3 1 / 8" UPK / 16" x 20 3 / 16" 3 1 / 8" UPK24WH / 16" x 20 3 / 16" 3 1 / 8" Pantry Roll Tray Kit Roll Tray Kits feature ½" thick solid wood front and furniture board sides and back, or specify UPK WH for white. Maximum weight per square foot is 15 lbs. All guides are white. Order under style 011. No TKIT available for B27 due to face frame. Bumper pads for field installation included. TKIT can be installed on the cabinet floor or above the halfdepth shelf. Roll Tray Kits TKIT TKIT15WH TKIT " TKIT18WH " TKIT " TKIT21WH " TKIT " TKIT24WH " TKIT 48

51 Miscellaneous Style (#010) Double Wastebasket Roll-Out DWBR White epoxy coated wire with Full Extension guides. Includes two 27 quart Wastebaskets with wire storage compartment /16" Mounted on white melamine board and installs to the floor of the cabinet. DWBR Double Wastebasket Cabinet Roll Out B15 H * B18 H B21 H B24 H B30 H * 22" Cabinet SB30 SB33 SB36 SB39 SB42 Double Wastebasket Roll Out P P P P P Cabinet U1590 U1890 U2490 U3090 U1596 Double Wastebasket Roll Out I I I I I Order under style 011. Installation of this accessory requires removing half-depth shelf. See matrix below for installation recommendations. Key H Must remove half-depth shelf. I Can be installed without modification to cabinet. ACCESSORIES AND PARTS B33 B36 B39 B42 H H H H SB48 SF30 SF36 SF42 P P P P U1896 U2496 U3096 I I I P Location of plumbing should be checked prior to installation of storage accessory. * Recommended. B45 H SFC36 P B48 H SFC42 P SCB42 H U15 I SCB48 H U18 I SB24 P U24 I SB27 P U30 I Touch Up Kit TUKIT 0 40 TUKIT contains one felt marker and one putty stick. For white and antique styles, Touch-Up is only recommended for face frames and End Panels. 49

52 Miscellaneous Style (#010) Frame Spacers NEW For use to provide additional door adjustment in field. HNGSPCRF 0 8 HNGSPCRF Designed to be placed between the face frame and hinge mounting plate. HNGSPCRF sold in pairs. HNGSPCRF50 sold in packs of 50. ACCESSORIES AND PARTS For use to provide additional door adjustment in field. HNGSPCRF Hinge Spacers HNGSPCRD 0 8 HNGSPCRD NEW Designed to be placed around the hinge cup and against the back of the door. HNGSPCRD sold in pairs. HNGSPCRD50 sold in packs of 50. HNGSPCRD Hinge Angle Restrictor Clips NEW For use in applications with cabinets installed at varying depths to prevent the door damage caused by opening into an adjacent cabinet or wall. HNGRESCLP 0 8 Restricts hinges to 86 degree opening capability. HNGRESCLP Not recommended for cabinets with roll trays specified in partial overlay styles. Sold in pairs. 50

53 Warped Door Policy Contractor s Choice cabinetry is constructed to strict specifications, including the moisture content present in wood. When the moisture content is maintained at a constant level, Contractor s Choice is able to minimize the amount of expansion and contraction associated with natural wood. When a great amount of expansion and contraction occur, the result can be a warped door. By strictly controlling the amount of humidity present during manufacturing, Contractor s Choice cabinetry is helping to ensure you receive a quality product. Because wood is a natural product, each piece of wood exhibits its own unique color and grain variations. These differences give wood its genuine beauty. The wood s natural properties also determine how each individual piece will react to changing weather conditions. Therefore, eliminating warped doors is virtually impossible. If you feel that you have a warped door, Contractor s Choice requires that you perform initial testing to determine the extent of the problem. 1. Remove the door from the cabinet and remove all decorative surface knobs or pulls and hinges. 2. Place the door on a completely flat surface, as determined by using a level, and alternately press on the opposite corners to observe if the door rocks or pulls away from the flat surface. 3. If you observe a gap between the door and flat surface, measure the distance to determine the amount of warpage. A door must be warped at least ¼" before it can be considered for replacement. When ordering a replacement by using Contractor s Choice Part Replacement Order Form, be sure to fill in the reason for proper replacement code as W. If the door is warped less than ¼", we recommend you allow a complete heating and cooling cycle (summer to winter) to allow the door to reach moisture equilibrium. Adding magnetic catches or roller catches will often correct minor problems. 4. If the door does not pull away from the flat surface, it is not warped. Most likely, there is a problem with the cabinet installation. When cabinets are not properly installed in a level or plumb position, they will become racked and will cause the door to appear warped. To check for a racked cabinet, place a level on one end rail. The bubble in the level will appear centered If the cabinet was properly installed in a level position. Now place the level on the other end rail. Again, if the bubble appears centered the cabinet is properly installed in a level position. Any variations in the location of the bubble will indicate the cabinet was not property installed. (A plumb bob will reveal the same information.) Another proper installation check is to place the level in the top, and then bottom of the installed cabinets face frame. Identify the bubble s position in both, top and bottom, locations of the face frame. The bubble s position will indicate if the cabinet was not properly installed. WARPED DOOR POLICY 51

54 Cabinet Care Suggestions Cleaning Tip: Never use a dishcloth to clean or dry cabinet exteriors or interiors. Remnants of detergent or grease may be contained within the dishcloth. Interiors: Contractor s Choice cabinet interiors are surfaced with Aristex, a quality laminate material that resists scuffs, marks, and most common household spills. 1. To clean the interior surface, simply wipe with a damp cloth or sponge, then dry. 2. To remove food residue or grease, use the suds from any common dishwashing liquid and a damp cloth to wipe clean. Dry thoroughly. CAUTION: If a spill occurs, it is important to clean up the spill and dry the surface immediately. A spill left unattended will soak through the Aristex and cause damage. Exteriors Wood Finish: Contractor s Choice wood exteriors are manufactured with a quality finish that protects the wood and brings out its full beauty. To maintain your cabinets appearance, Contractor s Choice recommends cleaning them at least once a month. 1. Simply wipe the surface of your cabinets with a clean damp cloth, then dry. CABINET CARE 2. To remove general soil or grease, use the suds from any common dishwashing liquid and a damp cloth to wipe clean. Dry thoroughly. 3. Excess moisture can damage any cabinet finish; areas near the sink, range, dishwasher, oven and baseboards are the most susceptible. Keep these surfaces dry. 4. Because Contractor s Choice uses a quality varnish on the finish, waxing your cabinets is not necessary. If waxing is preferred, use any furniture polish or lemon oil recommended for fine furniture. Be sure to completely wipe off the excess wax to avoid build-up. CAUTION: Avoid using cleaners that contain bleach, ammonia or state on the label they have any type of abrasives. These cleaners can cause damage to your cabinet finish. Exteriors Laminate/Thermofoil: Some Contractor s Choice styles use doors and drawer fronts with a laminate or thermofoil finish. To clean this type of finish, Contractor s Choice recommends the same procedure described for wood exteriors. Exception: DO NOT wax laminate or thermofoil cabinet surfaces. 52

55

56 Contractor s Choice is your dedicated partner in providing and delivering timeless cabinetry solutions with lasting quality for your multi-family living complex MasterBrand Cabinets, Inc. Printed in USA Product photography and illustrations have been reproduced as accurately as printing technologies permit. To ensure highest satisfaction, we strongly suggest you view an actual sample for best color wood grain and finish representation. Styles, product availability and construction may vary slightly from those shown in this Pricing & Specifications book due to material availability and/or design evolution. Specifications are subject to change without notice. Check One Touch for the latest updates. Our customer service is available if your design requires verification of product availability and specifications. CCPS /WDS/9.6M