Specifications. S&C Manual Vista Underground Distribution Switchgear Outdoor Distribution (15.5 kv through 38 kv)

Transcription

1 Outdoor Distribution ( kv through kv) Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply. SPECIAL TO THIS PRODUCT: INCLUSIONS: S&C Vista Underground Distribution Switchgear features load-interrupter switches for switching - or 900-ampere main feeders, and microprocessor controlled arc-spinners or vacuum fault interrupters for switching and protection of - or 900-ampere main feeders and 200-, -, or 900-ampere taps, laterals, and subloops. These elbow-connected components are enclosed in a SF 6 - insulated, welded-steel tank, completely protected from the environment. The switchgear is available with up to six ways (bus terminals, switches and/or fault interrupters) in ratings through kv and 25 ka symmetrical. The three-position (closed-open-grounded) loadinterrupter switches are manually operated and provide three-pole live switching of - or 900-ampere three-phase circuits. These switches also provide a visible gap when open and internal grounding for all three phases without exposure to medium voltage or the need to manipulate elbows. The 200-ampere, -ampere, or 900-ampere fault interrupters feature either arc-spinning contacts (-kv, 12,500-symmetrical models) or vacuum interrupters in series with manually operated three-position (closed-opengrounded) disconnects (-kv, 25,000-symmetrical, and all -kv and -kv models) for isolation and internal grounding of each phase. Fault interrupters provide three-pole load switching and fault interruption through 25 ka symmetrical, or singlepole load switching and fault interruption through 12.5 ka symmetrical (for other possible ratings, refer to the nearest S&C Sales Office). Fault interruption is initiated by a programmable overcurrent control. The total clearing time (from initiation of the fault to total clearing) can be as fast as 40 milliseconds. For single-pole fault interrupters, the overcurrent control can also be programmed to provide three-pole fault interruption. Large windows provide a clear view of the open gap, ground position, and ground bus... allowing the operator to easily confirm the positions of the load-interrupter switches and disconnects of the fault interrupters. Trip indicators, which are readily visible through the windows, are provided for the fault interrupters. Each unit of gear is furnished with a manual handle to charge the operating mechanisms and open, close, and ground the load-interrupter switches and fault interrupters. The operating mechanisms operate independently of the speed of the manual handle and are designed to prevent inadvertent operation from the closed position directly to the ground position and vice versa. Operating shafts are padlockable in any position and can also be padlocked to prevent operation to the ground position. Terminals are equipped with 200-ampere-rated bushing wells or - or 900-ampere bushings (as specified). Bushing and bushing-well interfaces are in accordance with IEEE Standard 6 to accept all standard insulated connectors and inserts. In addition, Vista UDS has been certified as arc resistant per IEC 8 Appendix AA for fault currents up to 12.5 ka symmetrical for 15 cycles (25 ka symmetrical for units rated 25 ka short circuit). Arc resistance is standard for the Pad- Mounted and UnderCover Styles. For the Vault-Mounted Styles, Catalog Number Suffix -N must be specified, in which case a flange will be welded to the pressure relief device for connection of user-supplied piping to vent exhaust gases out of the vault area. When optional voltage indication is specified, all routine operating tasks switching, voltage testing, and grounding can be accomplished by a single person without cable handling or exposure to medium voltage. An optional feature that combines voltage indication with provisions for low-voltage phasing is also available. Cable testing for faults can be performed through the back of a user-supplied elbow or through a user-supplied feed thru insert eliminating the need for difficult cable handling or parking stands. The programmable overcurrent control is programmed using a personal computer connected to the control through an adapter cable (listed in the table of ACCESSORIES on page 11). Power and input signals are provided by current transformers. The control features a variety of time-current characteristic (TCC) curves standard E and K speed curves, innovative coordinating speed tap and main curves, and relay curves per IEEE C Coordinating-speed tap curves are used for fault interrupters feeding subloop taps and are specifically designed to optimize coordination with load-side weak link/backup current-limiting fuse combinations and source-side relays with low time-dial settings. The coordinating-speed main curves are used for fault interrupters on main feeders and have a longer minimum response time and different shape to coordinate with tap-interrupter curves. Coordinating-speed curves have phase-overcurrent and ground-overcurrent settings. If desired, the ground-overcurrent August 23, 2010 S&C Electric Company Specification Bulletin

2 Conditions of Sale Continued setting can be turned off. (A ground-overcurrent setting is not available when the control is programmed for singlepole tripping of the fault interrupters.) These curves can be tailored to the application using a variety of instantaneous and definite-time settings. Vista switchgear is considerably smaller than traditional air-insulated gear, and is available in several styles, so it can be installed exactly where needed. The standard mounting styles of switchgear are as follows: UnderCover Style When the UnderCover style is specified, the gear is provided with a stainless-steel tank and submersible wiring. Vault-Mounted Style Two versions of this style are available: Wet-Vault-Mounted Style is intended for vaults that are subject to periodic flooding and includes submersible wiring and electrical components. Dry-Vault-Mounted Style is intended for vaults that are not subject to periodic flooding and does not include submersible wiring and electrical components. When the Wet-Vault-Mounted Style is specified, a stainless-steel tank is furnished, suitable for mounting on the floor or wall of a vault. When the Dry-Vault-Mounted Style is specified, a mild-steel tank is furnished. Pad-Mounted Style When the pad-mounted style is specified, a mild-steel or, optionally, stainless-steel enclosure and tank are provided. Pad-mounted enclosures meet the requirements of ANSI C (enclosure integrity). The top of the pad-mounted enclosure is hinged on both sides for convenient access to the operating and termination compartments. A removable panel provides access to the elbows and cables and is secured by the overlapping padlockable top. A resilient closed-cell gasket on the enclosure bottom flange protects the finish from being scratched during installation and isolates it from the alkalinity of a concrete foundation. Enclosures are protected from corrosion by S&C s Ultradur Finishing System. APPLICATION NOTES: Fault Interrupter S&C Vista Underground Distribution Switchgear features either arc-spinning contacts ( kv, 12.5 ka symmetrical), vacuum fault interrupters for three-pole load switching and fault interruption through 25 ka symmetrical, or singlepole load switching and fault interruption through 12.5 ka symmetrical. Complete ratings for the fault interrupter, as applied in Vista switchgear, are shown in the table on page 3. In addition to the load-dropping ratings shown, the fault interrupter is capable of interrupting transformer magnetizing currents associated with the applicable loads, as well as line-charging and cable-charging currents typical for distribution systems of these voltage ratings. The duty-cycle fault-closing rating shown for the fault interrupter defines the ability to close the interrupter the designated number of times into the closed position or ground position against a three-phase fault as follows: Main Contacts The fault interrupter shall have the ability to close the designated number of times into a three-phase fault equal to rated value and interrupt the resulting short-circuit current. The fault interrupter shall remain operable and able to carry and interrupt its rated continuous current. Ground Contacts The fault interrupter ground switch shall have the ability to close the designated number of times against a three-phase fault equal to the rated value with the ground switch remaining operable and able to carry its rated fault-closing current. A Note on Single-Pole Switching In single-pole switching of ungrounded-primary three-phase transformers or banks (or single-phase transformers connected line-to-line), circuit connections or parameters may, in some cases, produce excessive overvoltages. In particular, for the following applications above 22 kv, single-pole switching by any means should be performed only under the conditions stated in italics: Switching unloaded or lightly loaded delta-connected or ungrounded-primary wye-wye connected threephase transformers or banks (or line-to-line connected single-phase transformers), rated 150 kva or less threephase, or 50 kva or less single-phase or of any kva rating when combined with unloaded cables or lines where maximum system operating voltage exceeds 22 kv. Single-pole switching should be performed only if each phase is carrying 5% load or more, or if the transformer or bank is temporarily grounded at the primary neutral during switching. Switching loaded or unloaded ungrounded-primary wye-delta connected three-phase transformers or banks alone or combined with unloaded cables or lines where maximum system operating voltage exceeds 22 kv. Single-pole switching should be performed only if each phase is carrying 5% load or more and if the lighting-load phase is always switched open first (or switched closed last); or if the transformer or bank is temporarily grounded at the primary neutral during switching. 2 S&C Specification Bulletin

3 Load-Interrupter Switch S&C Vista Underground Distribution Switchgear features load-interrupter switches for three-pole live switching of three-phase circuits. Complete ratings for the load-interrupter switch, as applied in Vista Switchgear, are shown in the table below. In addition to the load-dropping ratings shown, the switch is capable of interrupting transformer magnetizing currents associated with the applicable loads, as well as line-charging and cable-charging currents typical for distribution systems of these voltage ratings. For applications involving load current with high harmonic content (such as rectifier load currents), refer to the nearest S&C Sales Office. The dutycycle fault-closing rating shown for the switch defines the ability to close the switch into the closed or ground position the designated number of times against a three-phase fault equal to the rated value, with the switch remaining operable and able to carry and interrupt rated current. EXCLUSIONS: Three-phase units listed on pages 4 through 6 do not include the switchgear style, optional features, or accessories listed in the tables on pages 7 through 11. How to Order 1. Obtain the catalog number of the desired unit from the table on pages 4 through Specify the desired switchgear style from the table on page 7 and add the appropriate suffix to the catalog number. 3. For 12.5-kA-rated models with one or more fault interrupters, add a suffix designation to the catalog number indicating the desired number of three-pole and single-pole fault interrupters, selected from the table on page 7. This step is not applicable to models rated 25 ka short circuit. 4. Add suffix designations to the catalog number indicating the optional features desired, selected from the table on pages 8 through Obtain the catalog number of the accessories from the table on page 11 and touch-up kit components from the table on page 11. For example, the catalog number of a Vista Underground Distribution Switchgear unit, UnderCover style, Model 422 with all single-pole fault interrupters, rated 12.5 ka short circuit and kv maximum at 60 hertz, and equipped with voltage indication with provisions for low-voltage phasing is R1-UT0L2. 50/60-Hz ANSI Ratings IEC Ratings in Parentheses12 kv Amperes, RMS Fault Interrupter Load-Interrupter Switch System Class (12) 27 (24) (36) Max () () () BIL 95 (95) 125 (125) 150 (150) Main Bus Cont. Current (630)f (630)f (630)f Short- Circuit, Sym. () () () () () () Cont., Load Dropping, and Load Splitting3 200 (200)d (630)l 200 (200)d (630)l 200 (200)d (630)l 1 ANSI ratings have been assigned in accordance with the applicable portions of IEEE C37.71, C37.72, and C IEC Ratings have been assigned in accordance with the applicable portions of IEC for a Class A switch. 2 Refer to the nearest S&C Sales Office for other possible ratings. 3 Parallel or loop switching. Fault interrupters and load-interrupter switches can switch the magnetizing current of transformers associated with the load-dropping rating. Unloaded cable switching rating: 10 amperes at kv, 20 amperes at kv and kv. 4 Applicable to fault closing into closed or grounded position. f 1200 (1200) amperes when switchgear is furnished with optional copper bus, Catalog Number Suffix -Z5. d (630) amperes when switchgear is furnished with optional -ampere bushings at fault interrupter terminals, Catalog Number Suffix -M2 or -M3. Ten-Time Duty-Cycle Fault-Closing, Sym. Into Closed Position () Into Grounded Position () () () () () () () () Ten-Time Duty-Cycle Fault-Interr., Sym. () () () () () () Cont., Load Dropping, and Load Splitting3 (630)a (630)k (630)a (630)k (630)a (630)k Ten-Time Duty-Cycle Fault-Closing, Sym.4 () (16 000) (16 000) Mom. and One-Second, Sym. () () () () () () l 900 (900) amperes when switchgear is furnished with optional 900-ampere fault interrupters, Catalog Number Suffix -Q1 through -Q6, plus optional copper bus, Catalog Number Suffix -Z5. () amperes symmetrical three-time duty-cycle faultclosing rating; (16 000) amperes symmetrical ten-time duty-cycle fault-closing rating. a 200 (200) amperes when switchgear is furnished with optional 200-ampere bushing wells at load-interrupter switch terminals, Catalog Number Suffix -M4. k 900 (900) amperes when switchgear is furnished with optional 900-ampere load-interrupter switches, Catalog Number Suffix -K1 through -K6, plus optional copper bus, Catalog Number Suffix -Z5. S&C Specification Bulletin

4 THREE-PHASE UNITS Model1 One-Line Diagram2 Max kv Ratings3 BIL Short-Circuit Amperes, RMS, Sym. Catalog Number Net Wt., Lbs.4 Page Reference for Dimensional Information R d d d d R d d d d R d d d d R through R R The model number defines the total number of ways, the number of load-interrupter switch ways, and the number of fault-interrupter ways. For example, a Model 431 has 4 ways in total of which 3 are loadinterrupter switch ways and 1 is a fault-interrupter way. 2 Refer to the nearest S&C Sales Office for other possible configurations. 3 Refer to the ratings table on page 3 for continuous, load-dropping, interrupting, and momentary ratings. 4 Welded-steel tank including components and SF 6 gas. d These models have not been certified as arc resistant for unrestricted access. Refer to the nearest S&C Sales Office. TABLE CONTINUED v 4 S&C Specification Bulletin

5 THREE-PHASE UNITS Continued Model One-Line Diagram2 Max 1 The model number defines the total number of ways, the number of load-interrupter switch ways, and the number of fault-interrupter ways. For example, a Model 431 has 4 ways in total of which 3 are loadinterrupter switch ways and 1 is a fault-interrupter way. kv Ratings3 BIL Short-Circuit Amperes, RMS, Sym. Catalog Number R R R R R Net Wt., Lbs Page Reference for Dimensional Information 12 through 19 2 Refer to the nearest S&C Sales Office for other configurations. 3 Refer to the ratings table on page 3 for continuous, load-dropping, interrupting, and momentary ratings. 4 Welded-steel tank including components and SF 6 gas. TABLE CONTINUED v S&C Specification Bulletin

6 THREE-PHASE UNITS Continued Model One-Line Diagram2 Max 1 The model number defines the total number of ways, the number of load-interrupter switch ways, and the number of fault-interrupter ways. For example, a Model 431 has 4 ways in total of which 3 are loadinterrupter switch ways and 1 is a fault-interrupter way. kv Ratings3 BIL Short-Circuit Amperes, RMS, Sym. Catalog Number R R R Net Wt., Lbs Page Reference for Dimensional Information 12 through 19 2 Refer to the nearest S&C Sales Office for other configurations. 3 Refer to the ratings table on page 3 for continuous, load-dropping, interrupting, and momentary ratings. 4 Welded-steel tank including components and SF 6 gas. 6 S&C Specification Bulletin

7 SWITCHGEAR STYLES Item Suffix to be Added to Switchgear Catalog Number Applicable to Models UnderCover Style. Includes stainless-steel tank and submersible wiring and control housings -U All models Dry-Vault-Mounted Style. Includes mild-steel tank. Does not include submersible wiring and control housings Wet-Vault-Mounted Style. Includes stainless-steel tank and submersible wiring and control housings Pad-Mounted Style. Includes mild-steel tank and mild-steel or stainless-steel padmounted enclosure for mounting switchgear on a pad. Does not include submersible wiring and control housings Two-way unit Three- or four-way unit Five- or six-way unit Mild-steel outer closure Stainless-steel outer closure Mild-steel outer closure Stainless-steel outer closure Mild-steel outer closure Stainless-steel outer closure -V3 All models -V4 All models Olive green finish -P2 201, 210, 211 Light gray finish -P7 201, 210, 211 Olive green finish -P12 201, 210, 211 Light gray finish -P17 201, 210, 211 Olive green finish -P4 Light gray finish -P9 Olive green finish -P14 Light gray finish -P19 320, 321, 330, 413, 422, 431, , 321, 330, 413, 422, 431, , 321, 330, 413, 422, 431, , 321, 330, 413, 422, 431, 440 Olive green finish -P6 514, 523, 624, 633 Light gray finish -P11 514, 523, 624, 633 Olive green finish -P16 514, 523, 624, 633 Light gray finish -P21 514, 523, 624, 633 SINGLE-POLE OR THREE-POLE FAULT INTERRUPTING123 Item Suffix to be Added to Switchgear Catalog Number Applicable to Models Single-Pole Manual Fault Interrupter on all fault-interrupting ways -T0 Three-Pole Manual Fault Interrupter on one fault-interrupting way (single-pole manual fault interrupter on all other fault-interrupting ways) Three-Pole Manual Fault Interrupter on two fault-interrupting ways (single-pole manual fault interrupter on all other fault-interrupting ways) Three-Pole Manual Fault Interrupter on three fault-interrupting ways (single-pole manual fault interrupter on all other fault-interrupting ways) Three-Pole Manual Fault Interrupter on four fault-interrupting ways (single-pole manual fault interrupter on all other fault-interrupting ways) Three-Pole Manual Fault Interrupter on five fault-interrupting ways (single-pole manual fault interrupter on all other fault-interrupting ways) Three-Pole Manual Fault Interrupter on six fault-interrupting ways -T6 1 Not applicable to models rated 25 ka short circuit. All 25-kA-rated models include three-pole manual fault interrupters. 2 Refer to the nearest S&C Sales Office for other possible configurations. -T1 -T2 -T3 -T4 -T kA-rated models with 1 or more fault interrupters 12.5-kA-rated models with 1 or more fault interrupters 12.5-kA-rated models with 2 or more fault interrupters 12.5-kA-rated models with 3 or more fault interrupters 12.5-kA-rated models with 4 or more fault interrupters 12.5-kA-rated models with 5 or more fault interrupters 12.5-kA-rated models with 6 or more fault interrupters 3 For standard models, components are in the following order (from left to right) when facing the operating side of the gear: load switches, bus taps, three-pole fault interrupters, single-pole fault interrupters. S&C Specification Bulletin

8 OPTIONAL FEATURES Item Suffix to be Added to Switchgear Catalog Number Applicable to Models Stainless-Steel Tank for Dry-Vault-Mounted Style, Wet-Vault-Mounted Style, or Pad-Mounted Style Switchgear -S All models Mounting Provisions for Fault Indicator for each Load- Interrupter Switch in Pad-Mounted Style Switchgear. Accommodates three-phase indicator with single-phase sensors Without viewing window in padmounted enclosure With viewing window in pad-mounted enclosure -F1 -F2d All models except Model 201 Potential Indication with Test Feature. Includes LCD display to indicate presence of voltage on each phase, and solar panel to supply power for testing of complete voltage-indication circuit and phasing circuit (if furnished). One potential indicator is provided for each bus-terminal, load-interrupter switch, and fault-interrupter way Without provisions for low-voltage phasing -L1 With provisions for low-voltage phasing -L2 All models Spanish Labels -L51 All models International Crating1 -L71 All models Way 1 -K1 Way 2 -K2 900-Ampere Load-Interrupter Switch234 on 900-Ampere Fault Interrupter234 on Way 3 -K3 Way 4 -K4 Way 5 -K5 Way 6 -K6 Way 1 -Q1 Way 2 -Q2 Way 3 -Q3 Way 4 -Q4 Way 5 -Q5 Way 6 -Q6 All models rated 25 ka 1 Wood products used in packaging are either hardwood or certified by the wood supplier as being heat treated (kiln dried) to a core temperature of 133 F (56 C) for a minimum of 30 minutes ampere cable connectors must be used. 3 If piggybacked cable connectors are desired, refer to the nearest S&C Sales Office. 4 Copper bus, Catalog Number Suffix -Z5, must be specified if 900-ampere load-interrupter switches and/or 900-ampere fault interrupters are specified. d Specify Suffix -F12 for Pad-Mounted Style switchgear with stainlesssteel outer enclosure, Catalog Number Suffix -P12, -P14, -P16, -P17, -P19, or -P21. TABLE CONTINUED v 8 S&C Specification Bulletin

9 OPTIONAL FEATURES Continued Item Suffix to be Added to Switchgear Catalog Number Applicable to Models -A Bushings Without Studs, at load-interrupter switch and bus terminals (in lieu of standard -A bushings with studs) -A1 Bushings Without Studs, at load-interrupter switch, fault interrupter, and bus terminals (in lieu of standard -A1 bushings with studs) -M1 All models rated 12.5 ka -M1 All models rated 25 ka -A Bushings at fault interrupter terminals (in lieu of 200-A bushing wells) 200-A Bushing Wells at load-interrupter switch and bus terminals (in lieu of -A bushings with studs) Arc Resistance for Vault-Mounted Style (arc resistance is standard for Pad-Mounted and UnderCover Styles), per IEC 8 Appendix AA, for arcs occurring internal to the tank (15 cycles, 12 ka symmetrical for 12.5-kA-rated models and 15 cycles, 25 ka symmetrical for 25-kA-rated models) Two-Hole Ground Pad, one per way, located below bushings or bushing wells (in lieu of standard one ground pad per tank) Remote Low-Pressure Alarm3 includes internal contact for remote low-pressure indication, with wiring to outside of tank Without studs -M2 All models rated 12.5 ka except With studs -M3 Models 210, 320, 330, and 440 With wires routed on tank for future customer connections With wires terminated in an enclosure furnished with a terminal block for customer connections -M4 -N -O All models -R11 -R12 -R2 All models rated 12.5 ka except Model 2012 All models with Catalog Number Suffix -V3 or -V4 All Pad-Mounted and Dry-Vault- All UnderCover and Wet-Vault- All Pad-Mounted and Dry-Vault- 1 Bushings are rated 900 amperes on ways furnished with 900-ampere load-interrupter switches (Catalog Number Suffix -K1 through -K6 ) and/or 900-ampere fault interrupters (Catalog Number Suffix -Q1 through -Q6 ). 2 Model 201 is furnished with 200-ampere bushing wells at bus terminals as standard. 3 Must be specified if remote supervisory features such as remote lowpressure indication are planned. TABLE CONTINUED v S&C Specification Bulletin

10 OPTIONAL FEATURES Continued Item Suffix to be Added to Switchgear Catalog Number Applicable to Models External Trip Provisions. Allows three-pole tripping of single-pole or three-pole fault interrupters via a trip signal from a remote location or an external relay. Requires a 110/ 120-Vac 50/60-Hz control power source1 External Trip Provisions. Allows three-pole tripping of single-pole or three-pole fault interrupters via a trip signal from a remote location or an external relay. Requires a 220/ 240-Vac 50/60-Hz control power source1 Key Interlocks. Locks load-interrupter switch or three-pole fault interrupter (Catalog Number Suffix -T1 through -T6 ) in the open position2 In addition to standard overcurrent control for all fault interrupters In lieu of standard overcurrent control and current transformers for all fault interrupters In addition to standard overcurrent control for all fault interrupters In lieu of standard overcurrent control and current transformers for all fault interrupters -R31 -R32 -R41 -R42 -R33 -R34 -R43 -R44 Way 1 -X1 Way 2 -X2 Way 3 -X3 Way 4 -X4 Way 5 -X5 Way 6 -X6 Copper Bus3 -Z5 All models 1 The user-supplied trip-initiating signal must be a momentary contact. Refer to the nearest S&C Sales Office if an application requires the use of a latching contact. All Pad-Mounted and Dry-Vault- All UnderCover and Wet-Vault- All Pad-Mounted and Dry-Vault- All UnderCover and Wet-Vault- All Pad-Mounted and Dry-Vault- All UnderCover and Wet-Vault- All Pad-Mounted and Dry-Vault- All UnderCover and Wet-Vault- Any in which Way 1 is a loadinterrupter switch or three-pole fault interrupter Any in which Way 2 is a loadinterrupter switch or three-pole fault interrupter Any in which Way 3 is a loadinterrupter switch or three-pole fault interrupter Any in which Way 4 is a loadinterrupter switch or three-pole fault interrupter Any in which Way 5 is a loadinterrupter switch or three-pole fault interrupter Any in which Way 6 is a loadinterrupter switch or three-pole fault interrupter 2 Motor operators can not be retrofitted onto ways with key interlocks. 3 Main bus can be rated up to 1200 amperes when Catalog Number Suffix -Z5 is specified. 10 S&C Specification Bulletin

11 accessories Item Catalog Number Shotgun Clamp Sticks for use with separable connectors Storage Bag for Shotgun Clamp Sticks, heavy canvas Overcurrent-Control Adapter Cable. Required for programming overcurrent control For connecting control to user-furnished personal computer in the field For connecting control (removed from its enclosure) to user-furnished personal computer in the shop Portable Motor Operator for operation of load-interrupter switches and singleor three-pole fault interrupters from a remote location. Includes carrying case, and 50-foot cable with remote controls. Power supplied by 69-5Z\x0 length Z\x0 length length length For personal computers having 25-pin serial communication port For personal computers having 9-pin serial communication port For personal computers having 25-pin serial communication port For personal computers having 9-pin serial communication port User-furnished 24-volt battery and battery charger S&C-furnished 24-volt battery and battery charger S&C-furnished AC input power supply TA-2366 TA-2367 TA-2368 TA R1 322R1 323R1 Pentahead Socket, for Z\x-inch drive usb cable kit USB Cable Kit for connecting a personal computer to the Vista Overcurrent Control. Includes USB cable, adapter cable, driver CD-ROM, and installation instructions Item Catalog Number TA-3153 firmware upgrade Firmware Upgrade Kit for Vista Overcurrent Control. Includes CD-ROM and instructions Item Catalog Number CUA-6895 touch-up kit components Aerosol Coatings in 12-ounce cans Item Catalog Number S&C Light Gray Outdoor Finish S&C Olive Green (Munsell 7GY3./1.5) Outdoor Finish S&C Red-Oxide Primer S&C Specification Bulletin

12 Vista UDS Tank Applicable to All Models Rated kv, 12.5 ka Symmetrical (Model 422 shown) Dimensions in inches (mm) 3¹⁵ ₁₆ (100) 5 (127) TYPICAL 26⁵ ₈ d (676) 25³ ₈ d (645) 17¹ ₂ d (445) W TERMINATION VIEW ⁵ ₈ (16) DIAMETER 8 PLACES 34¹³ ₁₆ (884) 33⁷ ₁₆ (849) 1³ ₄ (44) 5¹ ₄ (133) 3 (76) 8 (203) APPROXIMATE PROJECTED CABLE CENTER LINES D E 5 (127) TYPICAL G 3¹⁵ ₁₆ (100) ANCHOR BOLT PLAN d Measured to bottom of mounting feet. 12 S&C Specification Bulletin

13 32³ ₁₆ (817) 5¹ ₄ (133) SIDE VIEW Ratings Model kv, Max Short-Circuit, Amperes, RMS, Sym. Da Ea Ga W 201, 210, 211 NA NA NA 32ZC\zn (833) 320, 321, 330 NA NA NA 47ZC\zn (1214) 413, 422, 431, 440 f 28ZB\zn (735) 7B\, (194) 28ZB\zn (735) 65M\zn (1662) 514, ZB\zn (735) 7B\, (194) 43ZB\zn (1116) 80M\zn (2043) 624, ZB\zn (1116) 7B\, (194) 43ZB\zn (1116) 95M\zn (2424) a All four-, five-, and six-way units include an extra 2B\,-inch (67-mm) gap between Ways Two and Three (four-way units) or between Ways Three and Four (five- and six-way units). f See pages 14 and 15 for -kv, 25-kA symmetrical models. S&C Specification Bulletin

14 Vista UDS Tank Applicable to All Models Except Those Rated kv, 12.5 ka Symmetrical (Model 422, kv, 12.5 ka symmetrical shown) B C C Dimensions in inches (mm) 33 (8) 28³ ₄ (730) W TERMINATION VIEW 35 (889) SIDE VIEW 5¹ ₄ (133) EIGHT ⁵ ₈ (16) DIAMETER W 1¹ ₂ () TYPICAL 3 (76) TYPICAL 35 (889) 26 (660) 8 (203) 1¹ ₁₆ (27) TYPICAL B C D E G F APPROXIMATE PROJECTED CABLE CENTER LINES ANCHOR BOLT PLAN 14 S&C Specification Bulletin

15 Ratings Model kv, Max Short-Circuit, Amperes, RMS, Sym. B C Dd Ed F Gd W f 26ZZ\zn (678) 5 (127) NA NA 3ZB\zn (100) NA 55>\zn (1411) ZB\zn (100) 5 (127) NA NA 3ZB\zn (100) NA 32M\zn (824) 22Z\zn (560) 5C\v (146) NA NA 4ZC\zn (122) NA 55>\zn (1411) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA B\zn (973) 22Z\zn (560) 5C\v (146) NA NA 4ZC\zn (122) NA 55>\zn (1411) f 11ZZ\zn (7) 5 (127) NA NA 3ZB\zn (100) NA 55>\zn (1411) ZB\zn (100) 5 (127) NA NA 3ZB\zn (100) NA 47ZC\zn (1214) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 55>\zn (1411) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 55>\zn (1411) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 55>\zn (1411) f 3ZB\zn (100) 5 (127) 28ZB\zn (735) 7B\, (194) 3ZB\zn (100) 28ZB\zn (735) 65M\zn (1662) ZB\zn (100) 5 (127) 28ZB\zn (735) 7B\, (194) 3ZB\zn (100) 28ZB\zn (735) 65M\zn (1662) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 72ZC\zn (1849) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 72ZC\zn (1849) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 72ZC\zn (1849) f 3ZB\zn (100) 5 (127) 28ZB\zn (735) 7B\, (194) 3ZB\zn (100) 43ZB\zn (1116) 80M\zn (2043) ZB\zn (100) 5 (127) 28ZB\zn (735) 7B\, (194) 3ZB\zn (100) 43ZB\zn (1116) 80M\zn (2043) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 90Z\zn (2288) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 90Z\zn (2288) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 90Z\zn (2288) f 3ZB\zn (100) 5 (127) 43ZB\zn (1116) 7B\, (194) 3ZB\zn (100) 43ZB\zn (1116) 95M\zn (2424) ZB\zn (100) 5 (127) 43ZB\zn (1116) 7B\, (194) 3ZB\zn (100) 43ZB\zn (1116) 95M\zn (2424) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 107B\zn (2726) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 107B\zn (2726) 4ZC\zn (122) 5C\v (146) NA NA 4ZC\zn (122) NA 107B\zn (2726) d All four-, five-, and six-way units rated kv, 25 ka symmetrical or kv, 12.5 ka symmetrical include an extra 2B\,-inch (67-mm) gap between Ways Two and Three (four-way units) or between Ways Three and Four (five- and six-way units). f See pages 12 and 13 for -kv, 12.5-kA symmetrical models. S&C Specification Bulletin

16 Pad-Mounted Style Switchgear Models 201, 210, 211, 320, 321, 330, 413, 422, 431, 440 a (Model 422, kv, 12.5 ka symmetrical shown) Dimensions in inches (mm) 2³ ₄ (70) TYPICAL OPERATION SIDE N TYPICAL I M L TYPICAL TANK ⁵ ₈ (16) DIAMETER ANCHOR BOLT BY USER ANCHOR BRACKET BY S&C 37 (940) A D K C B W TERMINATION VIEW 8 (203) H TYPICAL J TYPICAL G APPROXIMATE PROJECTED CABLE CENTERLINES F W ANCHOR BOLT PLAN TERMINATION SIDE Ratings Model kv, Max Short- Circuit, A, RMS, Sym. A B C D Fd Gd H (1397) 17Z\x (445) Z\x (749) 61 (1549) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 55 (1397) 17Z\x (445) Z\x (749) 61 (1549) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 55 (1397) 17Z\x (445) Z\x (749) 61 (1549) 7B\, (194) 32C\zn (818) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 32C\zn (818) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 32C\zn (818) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) d All four-, five, and six-way units rated kv or kv, 12.5 ka symmetrical include an extra 2B\,-inch (67-mm) gap between Ways Two and Three (four-way units) or between Ways Three and Four (five- and sixway units). a See pages 18 and 19 for Models 514, 523, 624, and S&C Specification Bulletin

17 80 COVER OPENING P 8 ⁵ ₈ (16) DIA. ANCHOR BOLTS BY USER ANCHOR BRACKET BY S&C TANK OR CABINET D 5 (127) 1¹ ₂ () MIN. GASKET BY S&C CONCRETE PAD SIDE VIEW ANCHOR BOLT DETAIL Ratings Model kv, Max Short- Circuit, A, RMS, Sym. I J K L M N P W (76) 7 (178) 32ZC\zn (833) 7Z\, (181) 32C\zn (818) 10Z\x (267) 23ZC\zn (605) 39 (991) 4 (102) C\, (975) 55>\zn (1411) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 7 (178) 32ZC\zn (833) 4Z\x (114) 35 (889) 7Z\x (191) 23Z\x (597) 39 (991) 4 (102) 33C\v (857) 55>\zn (1411) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 7B\, (194) ZB\zn (989) 4Z\v (107) 35 (889) 7Z\x (191) 23Z\x (597) 44 (1118) 4 (102) 33C\v (857) 55>\zn (1411) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 3 (76) 16 (406) 47ZC\zn (1214) 16Z\, (409) 32C\zn (818) 7Z\x (191) 23ZC\zn (605) 72 (18) 4 (102) 23C\, (594) 55>\zn (1411) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 16 (406) 47ZC\zn (1214) 13Z\x (342) 35 (889) 7Z\x (191) 23Z\x (597) 72 (18) 4 (102) 16Z\x (419) 55B\, (1413) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 16Z\x (419) 55B\, (1413) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 16Z\x (419) 55B\, (1413) 13Z\, (333) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 3 (76) 7C\zn (183) 65M\zn (1662) 7Z\, (181) 32C\zn (818) 10Z\x (267) 23ZC\zn (605) 72 (18) 4 (102) 10ZZ\zn (271) 65M\zn (1662) 8Z\, (206) 35 (889) 11 (279) 23Z\x (597) 79 (2007) 4 (102) 7C\zn (183) 65M\zn (1662) 4B\, (117) 35 (889) 7Z\x (191) 23Z\x (597) 72 (18) 4 (102) 7M\, (200) 72ZC\zn (1849) 4Z\x (114) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 7M\, (200) 72ZC\zn (1849) 4Z\x (114) 35 (889) 7Z\x (191) 23Z\x (597) 79 (2007) 4 (102) 7M\, (200) 72ZC\zn (1849) 4Z\x (114) 35 (889) 7Z\x (181) 23Z\x (597) 79 (2007) S&C Specification Bulletin

18 Pad-Mounted Style Switchgear Models 514, 523, 624, and 633 a (Model 523, kv, 12.5 ka symmetrical shown) Dimensions in inches (mm) 2³ ₄ (70) TYPICAL N TYPICAL ⁵ ₈ (16) ANCHOR BOLT BY USER ANCHOR BRACKET BY S&C OPERATION SIDE I M K 37 (940) A 8 (203) TANK L D TERMINATION SIDE C B J TYPICAL H TYPICAL G F APPROXIMATE PROJECTED CABLE CENTER LINES W TERMINATION VIEW ANCHOR BOLT PLAN Ratings Model kv, Max Short- Circuit, A, RMS, Sym. A B C D F d G d H (1397) 17Z\x (445) Z\x (749) 61 (1549) 7B\, (194) 39ZZ\zn (1008) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 39ZZ\zn (1008) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 39ZZ\zn (1008) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) (1397) 17Z\x (445) Z\x (749) 61 (1549) 7B\, (194) 47C\zn (1199) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 47C\zn (1199) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) 7B\, (194) 47C\zn (1199) 5 (127) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) 65 (1651) 28 (711) (965) 65 (1651) NA NA 5C\v (146) d All four-, five, and six-way units rated kv or kv, 12.5 ka symmetrical include an extra 2B\,-inch (67-mm) gap between Ways Two and Three (four-way units) or between Ways Three and Four (five- and six-way units). a See pages 16 and 17 for Models 201, 210, 211, 320, 321, 330, 413, 422, 431, and S&C Specification Bulletin

19 80 COVER OPENING 8 ⁵ ₈ (16) DIA. ANCHOR BOLTS BY USER ANCHOR BRACKET BY S&C P TANK OR CABINET D 5 (127) 1¹ ₂ () MIN. GASKET BY S&C CONCRETE PAD SIDE VIEW ANCHOR BOLT DETAIL Ratings Model kv, Max Short- Circuit, A, RMS, Sym. I J K L M N P W (76) 14ZZ\zn (373) 80M\zn (2043) 14M\, (377) 32C\zn (818) 7Z\x (191) 23ZC\zn (605) 102 (2591) 4 (102) 14ZZ\zn (373) 80M\zn (2043) 12Z\, (308) 35 (889) 7Z\x (191) 23Z\x (597) 102 (2591) 4 (102) 14ZZ\zn (373) 80M\zn (2043) 12Z\, (308) 35 (889) 7Z\x (191) 23Z\x (597) 102 (2591) 4 (102) 16Z\v (413) 90Z\zn (2288) 12M\, (327) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) 4 (102) 16Z\v (413) 90Z\zn (2288) 12M\, (327) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) 4 (102) 16Z\v (413) 90Z\zn (2288) 12M\, (327) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) (76) 7C\zn (183) 95M\zn (2424) 7C\, (187) 32C\zn (818) 10Z\x (267) 23ZC\zn (605) 102 (2591) 4 (102) 7C\zn (183) 95M\zn (2424) 4B\, (117) 35 (889) 7Z\x (191) 23Z\x (597) 102 (2591) 4 (102) 7C\zn (183) 95M\zn (2424) 4B\, (117) 35 (889) 7Z\x (191) 23Z\x (597) 102 (2591) 4 (102) 7B\, (194) 107B\zn (2726) 4Z\v (107) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) 4 (102) 7B\, (194) 107B\zn (2726) 4Z\v (107) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) 4 (102) 7B\, (194) 107B\zn (2726) 4Z\v (107) 35 (889) 7Z\x (191) 23Z\x (597) 113 (2870) S&C Specification Bulletin

20 Printed in U.S.A.