E-passport testing equipment

Transcription

1 E-passport testing equipment Passport industry has gone into RFID now. Latest passport released are called «e-passport», being equipped with storage contactless chips. Quality of the finished booklets but also of the different components of the e-passport, is a major target for worldwide suppliers. BG INGENIERIE has released a set of small and easy to use testing equipment in order to validate production of inlays, passport covers, papers, etc... following ICAO norm. BG INGENIERIE proposes 8 different tests to answer the Norm written in ICAO V3.2 paper. Another set of e-passport testing equipment, but not from the ICAO paper, has been developed following manufacturer particular demands, in order to realise tests stronger than the ICAO paper norm: a 3 wheels testing devices accepting ID1 (ISO card dimensions) and ID3 (epassport dimensions) and testing both of them along 2 axes (due to RFID chip positioning), exists under 2 versions (1 e-passport or 5 e-passports together), as well as a roller pressure and a wrapping test. ICAO tests Stamp stress (impact) Pen stress Abrasion Back pocket Dynamic bending Passport torsion (twisting) Sheet turning Sheet pulling Warpage Peel strength NON ICAO tests e-passport 3 wheels e-passport 3 wheels (5 passports) Roller pressure Wrapping test RFID reader test e-passport reading distance OTHERS Chip implanting solution for ID3 documents An interoperability test device to compare e-passports and readers compatibility is under study. 48 (+33 (0) (0)

2 E-passport Testing Equipment - ICAO BGI086 Back pocket testing equipment The BGI086 is a stand alone equipment. This test reproduces the stresses of sitting on a passport kept inside of the back pocket. - tests the e-passport further than the norm changing only parameters on the interface (strength applied from 150 to 500N, pressure time, number of cycles...) - simple and easy to use - screen touch interface in order to create and modify program 560 mm 615 mm 595 mm 60 kg PNEUMATIC CHARACTERISTICS 6 bars FOLLOWS NORMS REFERENCES : ICAO V3.2, paragraph 5.6 E-passport testing equipments Back pocket testing equipment bgi.sales@bginge.com : 49

3 E-passport testing equipments E-passport Testing Equipment - ICAO BGI085 Stamp - Pen - Abrasion testing equipment The BGI085 is a single equipment that performs ICAO stamp, pen and abrasion tests. - the 3 tests can be purchased individually or all together on 1 single machine - possibility to test the e-passports further than the norm changing only parameters on the interface ( number of cycles, surface to test...) - simple and easy to use thanks to a screen touch interface mm 520 mm 590 mm 37 kg PNEUMATIC CHARACTERISTICS 6 bars FOLLOWS NORM REFERENCE : ICAO V3.2, paragraphs 5.5, 5.12, 5.11 Stamp - Pen - Abrasion - testing equipment Stamp stress testing tool Pen stress testing tool Abrasion testing tool Stamp - Pen testing equipment Pen - Abrasion testing equipment Stamp - Abrasion testing equipment BGI085A-B-C BGI085A BGI085B BGI085C BGI085A-B BGI085B-C BGI085A-C (+33 (0) (0)

4 E-passport Testing Equipment - ICAO BGI085A Stamp stress testing tool ICAO V3.2, paragraph 5.5 : ICAO test that realises stamp (impact) test. Follows ICAO norm (default program 1), but allows to test further than the norm (example : test zone of 2 x 2 cm) Test for passports and e-passports BGI085B Pen stress testing tool ICAO V3.2, paragraph 5.12 : ICAO test that realises pen test. Follows ICAO norm (default program 1), but allows to test further than the norm (example : test zone of 2 x 2 cm) E-passport testing equipments Test for passports and e-passports BGI085C Abrasion testing tool ICAO V3.2, paragraph 5.11 : ICAO test that realises abrasion test on the MRZ. Follows ICAO norm (default program 1), but allows to test further than the norm. Test for passports and bgi.sales@bginge.com : 51

5 E-passport testing equipments E-passport Testing Equipment - ICAO BGI088 Passport torsion testing equipment x 5 The BGI088 is a stand alone equipment. This test applies torsional stress to the e-passport. - 5 e-passport are tested at the same time on the machine - possibility to test the e-passports further than the norm changing only parameters on the interface ( number of cycles, frequency, angle...) - simple and easy to use thanks to a screen touch interface 375 mm 480 mm 520 mm 22 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraph 5.8 BGI088A Passport torsion calibration tool Calibration tool for BGI088 in order to prepare passport for test. Dimensions : 150 x 170 x 245 mm ; Weight : 4 kg Passport torsion testing equipment x 5 Passport torsion calibration tool BGI088 BGI088A 52 (+33 (0) (0)

6 E-passport Testing Equipment - ICAO BGI08810 Passport torsion testing equipment x 10 The BGI08810 is a stand alone equipment. This test applies torsional stress to the e-passport. - tests 10 e-passports simultaneously - possibility to test the e-passports further than the norm changing only parameters on the interface ( number of cycles, frequency, angle...) - simple and easy to use thanks to a screen touch interface 375 mm 960 mm 510 mm 39 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraph 5.8 E-passport testing equipments Calibration tool - BGI088A : Calibration tool for BGI08810 in order to prepare passport for test (p.50). Passport torsion testing equipment x 10 Passport torsion calibration tool BGI08810 bgi.sales@bginge.com : 53

7 E-passport testing equipments E-passport Testing Equipment - ICAO BGI087 Dynamic bending testing equipment The BGI087 is a stand alone equipment. It tests the bending fatigue resistance of the booklet. - tests 5 e-passports simultaneously - possibility to test the e-passports further than the norm changing only parameters on the interface ( number of cycles, frequency, length...) - simple and easy to use thanks to a screen touch interface 320 mm 580 mm 480 mm 33 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraphes 5.6 BGI087A Dynamic bending calibration tool Calibration tool for BGI087 in order to prepare passport for test. Dimensions : 200 x 220 x 240 mm ; Weight : 8.5 kg Dynamic bending testing equipment Dynamic bending calibration tool BGI087 BGI087A 54 (+33 (0) (0)

8 E-passport Testing Equipment - ICAO BGI089 Sheet turning testing equipment The BGI089 is a stand alone equipment. This equipment tests the folding passport sheet resistance at the spine. - 5 e-passport tested simultaneously - possibility to test the e-passports further than the norm changing only parameters on the interface ( number of cycles, frequency, angle...) - simple and easy to use - equipped with a screen touch interface in order to create and modify program 375 mm 690 mm 520 mm 36 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraphes 5.9 E-passport testing equipments Sheet turning testing equipment bgi.sales@bginge.com : 55

9 E-passport testing equipments E-passport Testing Equipment - ICAO BGI090 Sheet pulling testing equipment The BGI090 is a stand alone equipment. This equipment tests the pages tearing resistance and the sewing part resistance. - possibility to test the e-passports further than the norm changing only parameters on the interface (stength, speed) - simple and easy to use - equipped with a screen touch interface in order to create and modify program 251 mm 202 mm 480 mm 14 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraph 5.10 Sheet pulling testing equipment BGI (+33 (0) (0)

10 E-passport Testing Equipment - ICAO BGI104 MRP holder equipment The BGI104 is a stand alone equipment. This is not a testing device but still required by ICAO in order to put e-passport to rest position before starting a test session e-passports per holder - simple and easy to use - can be topped-up 130 mm 460 mm 130 mm kg FOLLOWS NORM REFERENCE : ICAO V3.2. E-passport testing equipments MRP holder equipment bgi.sales@bginge.com : 57

11 E-passport testing equipments E-passport Testing Equipment - ICAO BGI123 Passport warpage testing equipment The BGI123 is a stand alone equipment. This equipment measures the MRP warpage extent. - simple and easy to use - 1 machine for 2 tests : datapage warpage evaluation and book warpage evaluation - quick result - contactless measure (use of a laser) : no result fluctuation possible - for passports and e-passports 610 mm 400 mm 400 mm 26 kg FOLLOWS NORM REFERENCE : ICAO V3.2, paragraphes 6.5 & 6.6 Passport warpage testing equipment BGI (+33 (0) (0)

12 E-passport Testing Equipment - NON ICAO BGI107 E-passport warping testing equipment The BGI107 testing equipment is not part of ICAO paper norm but was developed by BG INGENIERIE following demands of passport manufacturers. It was developed from standard CQM wrapping for smartcards (BGI083) and adapted to ID3 e-passport document size. - simple and easy to use - Radius of test : 20mm and 25mm, other radius available on demand 160 mm 170 mm 136 mm 3.5 kg NOT PART OF ICAO PAPER NORM E-passport testing equipments E-passport warping testing equipment bgi.sales@bginge.com : 59

13 E-passport testing equipments E-passport Testing Equipment - NON ICAO BGI108 Roller pressure testing equipment The BGI108 testing equipment is not part of ICAO paper norm but was developed by BG INGENIERIE following demands of passport manufacturers. A wheel comes over the all passport surface, on «x» and «y» axes. - easy to use thanks to a screen touch interface - force applied : from 5 to 70 kg mm 375 mm 530 mm 40 kg PNEUMATIC CHARACTERISTICS 6 bars NOT PART OF ICAO PAPER NORM Roller pressure testing equipment BGI (+33 (0) (0)

14 E-passport Testing Equipment - NON ICAO BGI107 BGI127 3 Rotary wheels stress 2 axis testing ID3 testing equipment equipment x 1 The BGI127 testing equipment is not part of ICAO paper norm but was developed by BG INGENIERIE following demands of passport and card manufacturers. The equipment is based on card CQM requirements , reference P33 (p.41). It tests the stress and impact on 6 cards or passport in order to evaluate their resistance. - test for RFID cards, combi cards, dual cards, non homogeneous cards (display cards...) and passports 425 mm 400 mm 450 mm 20 kg NOT PART OF ICAO PAPER NORM E-passport testing equipments Markets Contactless card manufacturers: Banking, e-id card, loyalty card... Passport manufacturers. Rotary stress testing equipment bgi.sales@bginge.com : 61

15 E-passport testing equipments E-passport Testing Equipment - NON ICAO BGI098 3 wheels 2 axis ID3/ID1 testing equipment x 5 The BGI098 testing equipment is not part of ICAO paper norm but was developed by BG INGENIERIE following demands of passport manufacturers. It allows to realise the test on the all card or e-passport surface, on «x» and «y» axes. - tests e-passports and ID1 cards - tests 5 passports at the same time - developed from the standard EMV 3 wheels but adapted to ID3 dimensions - easy to use thanks to a screen touch interface 472 mm 1044 mm 515 mm 60 kg NOT PART OF ICAO PAPER NORM Markets Banking, GSM, Telecom, e-id card, health card, display cards... Accepts e-passport ID3 dimensions 3 wheels 2 axis ID3/ID1 testing equipment x 5 BGI (+33 (0) (0)

16 E-passport Testing Equipment - NON ICAO BGI103 3 wheels 2 axis ID3/ID1 testing equipment x 1 The BGI103 testing equipment is not part of ICAO paper norm but was developed by BG INGENIERIE following demands of passport manufacturers. It allows to realise the test on the all card or e-passport surface, on «x» and «y» axes. - tests e-passports and ID1 cards - test for 1 card - developed from the standard EMV 3 wheels but adapted to ID3 dimensions - easy to use thanks to a screen touch interface 460 mm 450 mm 515 mm 27 kg NOT PART OF ICAO PAPER NORM E-passport testing equipments Markets Banking, GSM, Telecom, e-id card, health card, display cards... Accepts e-passport ID3 dimensions 3 wheels 2 axis ID3/ID1 testing equipment x 1 bgi.sales@bginge.com : 63