EQUIPMENT 1.31 EMMEVI S24R TWO CHAMBER WITH DEVESTING GRIT NOZZLE EMMEVI S26 RECYCLING SANDBLASTER

Transcription

1 1 EMMEVI S24R TWO CHAMBER WITH DEVESTING GRIT NOZZLE dimensions D37xW42x H37cm tank capacities 2-0.5Kg power 9w supply 220/50 11Kg EE This unit enables sand blasting with adjustable pressure. Thanks to its modular design, it can be supplied customised with specific nozzle diameters (0.5mm, 0.7mm and 1.2mm) A new pump system for air delivery inside tanks enables complete removal of sand thus eliminating the need for continuous refills The special design of the nozzles prevents clogging due to humidity or sand accumulation Optimal visibility and lighting Possibility of sand blasting from 25my to 250my with aluminium oxide, and also coarse sand Nozzle selector inside main chamber Foot control Special socket for suction connection Pressure gauge and regulator Coarse sand recycling Low consumption (9W) and high luminosity neon light Protective sheet on window Rubber seal rings for two-handed operation EMMEVI S26 RECYCLING SANDBLASTER Suitable for chrome prosthesis work Fixed and adjustable nozzle (4mm) Pressure regulator with gauge Foot control Optimal visibility and lighting Air filter Facility for suction connection 1.31 dimensions D36xW38xH40 power 9W supply 220/50 15kg EE

2 MANFREDI SABLOMAT The Sablomat sandblasting machine has been manufactured in accordance with the requirements of the middle and large production laboratories. Sandblasting may be affected either automatically, in the rotating basket with timer, in this way uniform blasting will be achieved on several appliances, or it may be carried out manually The filter system assures no dust or sand will escape to the outside, even after years of operation Cleaning the filter is the only maintenance to be carried out. This very simple operation is only required after long running periods A special long-lasting, low voltage lamp provides the internal lighting and the inspection window is manufactured in such a way as to prevent the glass from fogging In order to prevent humidity, carried by the compressed air, from entering the Sablomat, it is equipped with a dehumidifying filter All the machine components, nozzle included, are covered by a 1-year guarantee Features Timer for programming the auto blasting cycle from 0-30mins Change over switch to select automatic or manual working cycle Push button control of the air jet in the manual working cycle Tetrabor nozzle with exceptionally long life Viewing screen is protected from dust to prevent clouding Integral dust control system, filters dust from expelled air Low voltage, long life lamp gives internal illumination Nozzle pressure regulator and manometer dimensions main unit supply EM2S 50cm + 15cm for dehumidifying filter D54cmxH67cm 220v single phase 0.8amp 75kg 1 N.B For Tetrabor replacement nozzle see section see section 6.7 STEAM CLEANER WASSERMANN STEAM CLEANER Compact steam jet for all cleaning applications Fast heat up Meets all EEC safety standards Complies with pressure equipment regulations 1999 (SI 1999/2001) Water level safety cut-out Steam volume regulator Working pressure 4 bar fully variable 3.3 litre capacity (manual fill) Can be wall mounted sales@bracon.co.uk voltage v 50/60hz output 1200w WxHxD dimensions 235 x 340 x 340 EW

3 1 ULTRASONIC BATHS BRACON U50 BATH Bracon cleaners pass through critical inspections at every stage of assembly, only quality approved components and methods are utilised. Circuits are, naturally, solid state, making these units very reliable. Bracon cleaners carry warranties extendible to 2 years and the bonding carries a 5 year guarantee. Outer cases and tanks are constructed out of top quality stainless steel, sub-assembly is safety earth bonded. BS EN ISO 110 and ESCHLE conformities are observed. Bracon cleaners are quiet in operation, all are fitted with 15-minute timers and conforming indicators. They are also fitted with vibration damping rubber feet, and a unique tank seal and fixing system reduces noise levels further and on heated models prevents case rise. overall dimensions L18.5XW11XH16cm internal tank dimensions L15xW8.5xH6.5cm supply 240v/1ph/50Hz working capacities 0.5litres timer range 0 15mins power 30 40Khz 100W accessories available EL kg lid & basket N.B. See our range of ultrasonic cleaning solutions on pages 2.30 and 2.31 BRACON U100 BATH overall dimensions D8.5XW14XH19cm internal tank dimensions D15xW15xH10cm supply 240v/1ph/50Hz working capacities 1.5litres timer range 0 15mins power 30 40Khz 100W 3.2kg accessories available lid & basket, beaker tray support, beakers 400 and 600ml EL1175 overall dimensions internal tank dimensions D27xW17xH19cm D24xW14xH10cm BRACON U300 BATH supply 240v/1ph/50Hz working capacities 2.5 litres timer range 0 15 mins power 30 40Khz 100W 4.2kg accessories available lid & basket, beaker tray support, beakers 400 and 600ml 1.33 EL

4 VACUUM FORMING UNITS. 1 DUNAFORM V For vacuum forming base plates, bling trays, custom trays, temporary splints, mouth guards, bruxism splints, copings and more! Dunaform V saves time and money, is fast and easy to use. Extremely simple to handle Works independently of air pressure Both round and square foils with the dimensions ø 120 and 125 mm and 125 x 125 mm can be processed For foil thicknesses of 0.1 to 4.0 mm Heating from above Economically priced. One-year guarantee assured quality and value mains supply output width ED V/50Hz 550w 320mm 260mm 260mm 7kg DUNAFORM PRESS A pressure moulding device for all applications of the dental thermoforming technique in the laboratory and in the practice. The thermo-controlled IR-radiator gets the working within a short time Heating and cooling times are programmable The heating of the sheets takes place on the model-turned-side Optical and acoustic prompts Large display-indication Simple operation The constructive design enables full utilization of the degree of thermoforming and the precise forming definition Low air consumption levels mains supply output width ED1001 sales@bracon.co.uk 230V/50Hz 850w 185mm 350mm 295mm

5 1 VACUUM MIXERS MESTRA KOALA VACUUM MIXER Smart, powerful and quiet Mestra build quality and reliability 10 programmes 3 stage (vacuum, vacuum + mix or just mix) Clockwise and anti-clockwise action ensures homogenous mix 250 and 550cc mixing pots supplied One of the largest ranges of mixing bowls available 230 to 1250cc koala dimensions D32xW31xH25 10kg bench stand dimension D40xW36xH56cm 9kg EM koala EM stand KOALA/IRIS MIXING BOWLS AND PADDLES PM cc PM cc PM cc PM cc PM cc plastic PM alginate PM cc stainless steel MESTRA IRIS VACUUM MIXER Economic Bench stand also available Stainless Steel Construction Easy to use Space saving, wall mounted unit Simple timer dimension D16xW16xH25cm 5.5kg EM EM stand

6 DENSTAR VIBRATORS 1 DENSTAR 510 Has simple round ergonomic design Variable vibration control dial Main body of unit is sealed to prevent entry of plaster, stone or investment Rubber table cover is easily detached for cleaning 110w 2A 2.1kg dimension width 140mm ED mm 76mm DENSTAR 500 Large table area Infinitely variable vibration control dial within two wave-frequency settings Low frequency for large bulk plaster movement High frequency for precision Main body of unit is sealed to prevent entry of plaster, stone or investment Rubber table cover is easily detached for cleaning 300w 2A 6kg dimension width 280mm ED mm 110mm DIPPING POT DENSTAR 200 DIGITAL DIPPING POT Excellent heat conductivity, lasting service life, and easy to use Built-in memory chip available to memorise the previous working even after turning off the power Easy to select Celsius or Fahrenheit Automatic heater-on indicator Led, (LED off when ring the preset ) Audible key pad 60w 2A 0.88kg 50 C ~ 120 C, (122 F ~ 248 F) dimension width 108mm 137mm 70mm ED1200 sales@bracon.co.uk

7 1 WAX BATH DENSTAR CHAMBER DIGITAL 4 chambers makes this pot the ideal choice for multi-wax techniques Digital control Heats wax quickly and maintains the required Built-in digital CPU circuit to preset and maintain desired accurately and precisely Temperatures can be selected in Celsius or Fahrenheit Easy to use and operate Automatic - on indicator LED (LED off when preset is red) 120w 4A 1.13kg 50 C ~ 120 C, (122 F ~ 248 F) dimension width 192mm 114mm 70mm ED1400 DENSTAR CHAMBER ANALOGUE 4 chambers makes this pot the ideal choice for multi-wax techniques Analogue dial control Heats wax quickly and maintains the required Built-in digital CPU circuit to preset and maintain desired accurately and precisely Easy to use and operate Automatic - on indicator LED (LED off when preset is red) 120w 4A 1.1kg room ~ 120 C (248ºF) dimension width 192mm ED mm 80mm 1.37 DENSTAR 420 WAX BATH A perfect choice for denture wax techniques Digital control Heats wax quickly and maintains the required Built-in digital CPU circuit to preset and maintain desired accurately and precisely Temperatures can be selected in Celsius or Fahrenheit Easy to use and operate Automatic - on indicator LED (LED off when preset is red) 120W 4A 1.1kg room ~ 120 C (248ºF) dimension width 192mm ED mm 70mm

8 BATHS 1 MESTRA WATER BATH For softening wax sheets and bite blocks Precision control from 30 to 75 C Powerful heater with rapid rise 1 litre stainless steel tank Polyurethane high density case Easy to clean dimensions capacity volts temp range EM D21xW23xH12cm 1.9kg 1litre 230V c WAX KNIVES sales@bracon.co.uk DENSTAR 140 SINGLE DIGITAL Its compact size makes for a very small benchtop footprint Ergonomically designed for prolonged comfortable use Consistently accurate digital control Temperature read-out in Celsius or Fahrenheit Memory Function: Memorises last working even after turning the power off Two additional memory keys (M1 & M2) to pre-set the ideal working s for different waxes Error Protection prevents accidental over-heating Two handpiece holders: A convenient magnetic cradle on the top of the control unit and a separate cradle Storage drawer in the rear for tips Supplied with six tips LED mood lighting! 9w 1a 0.56kg 50 C ~ 200 C, (122 F ~ 392 F) dimension width 76mm ED mm 63mm

9 1 DENSTAR 110 DUAL DIGITAL Two independently controlled handpieces Digital control Temperature read-out in Celsius or Fahrenheit Consistently accurate control Excellent heat conductivity through the tips Remembers the last working, even after turning off the power Easy to use Supplied with 6 tips AC100V-240V 50/60Hz 20W 2A 1.27kg 50 C ~ 200 C, (122 F ~ 392 F) dimension width 119mm ED mm 73mm DENSTAR 120 DUAL ANALOGUE Two independently controlled handpieces Analogue dial control Consistently accurate control Excellent heat conductivity through the tips Easy to use Supplied with 6 tips 20W 2A 1.94kg room ~ 200 C (392 F) dimension width 119mm 159mm 80mm ED1120 DENSTAR 130 HEATED MILLING HEAD Designed for milling work, this head may be attached to a variety of milling machines and surveyors Tip made of a highly conductive alloy Set includes 5 tips (two at 0, and one 2, 4 and 6 degrees) Can be controlled from Denstar Dual or Single wax knife Control units ED1130 set

10 WAX BOILING-OUT UNITS 1 MESTRA E2 Wax boiling-out and polymerising machine Stainless steel casing Water timer and thermostat Digital shower timer with alarm and 24-hour programmer Boiling-out of 6 open flasks (± 8 minutes) at 85 C Polymerisation of 12 flasks with SM clamps at 95 C is possible The E2 boiling-out and polymerisation machine is equipped with two set programmes. 1. Programme 1 (Boil-out programme) The operator can set a (e.g. 80 C) so that the unit is ready to shower at all times. Also setting the shower time required. 2. Programme 2 (Polymerisation programme) Delayed start time in hours and minutes up to This means the programme can be set to run at any particular time. Duration of increase in hours and minutes up to Required holding time at plateau in hours and minutes up to Also setting the shower time as required. dimensions D40.5xW63.5xH45cm supply 230v/50Hz power w earth cable 33kg EM CABINET FOR MESTRA E2 With water collector to prevent leaks if any of the E2-hoses break. EM sales@bracon.co.uk