65,000 A IR Catalog Number QA115AFCHH QA120AFCHH. 22,000 A IR Catalog Number. QA115AFHn a QA120AFHn a. Q215AFCHn a Q220AFCHn a QA115AFHH QA120AFHH

Transcription

1 Circuit s Arc-Fault and Ground-Fault s 06/3/4 Selection/Wiring Diagrams Arc-Fault Circuit Interrupters (AFCI) AFCI s detect arcing faults (an unintentional arcing condition in a circuit) that standard circuit breakers are unable to detect. The device is intended to mitigate the effects of arcing faults by functioning to de-energize the circuit when an arcfault is detected. Combination AFCI Detects all three possible types of arc fault: line-to-ground, line-to-neutral, and series. QAF2/QAFH2/HQAF2 -Pole V AC QAF2/QAF2H /240V AC Branch-Feeder AFCI 5 5 0,000 A IR QA5AFC a QAAFC a Q25AFC a Q2AFC a Detects line-to-ground and line-to neutral arcs. 22,000 A IR QA5AFCHn a QAAFCHn a Q25AFCHn a Q2AFCHn a 65,000 A IR QA5AFCHH QAAFCHH -Pole Combination AFCI Combination AFCI QAF2/QAFH2/HQAF2 -Pole V AC 5 QA5AF a QAAF a QA5AFHn a QAAFHn a QA5AFHH QAAFHH NEW Dual Function AFCI/GFCI The Dual Function Circuit combines Combination AFCI and GFCI, protecting against both Arc Faults and Ground Faults. The device includes the Self Test and Lockout feature, making it the fist in class in electrical safety for homeowners. QFGA2/QFGAH2/ HQFGA2 -Pole V AC 5 QA5DF QADF Q5DFH QDFH Q5DFHH QDFHH -Pole Branch Feeder AFCI -Pole Dual Function AFCI/GFC Ground-Fault Circuit Interrupters (GFCI) Ground Fault Equipment Protection (ma) Provides Class A (5mA) ground fault protection. Intended for personnel protection. De-energizes the circuit for all ungrounded conductors of the circuit. F/ HF -Pole V AC Plug-in Amp ,000 A IR No. QF5 a QF a QF25n QF 22,000 A IR No. QF5H a QFHn a QFH Provides protection of equipment from damaging line-to-ground faults currents. De-energizes the circuit for all ungrounded conductors of the circuit. QE/ QEH -Pole V AC Plug-in Amp 5 0,000 A IR No. QE5 a QE a QE 22,000 A IR No. QE5H a QEH a QEH -Pole GFCI GFCI F/ HF / 240V AC Plug-in QF25 QF2 QF2 QF240 QF250 QF260 QF25H QF2H QF2H QF240H QF250H QF260H QE/ QEH / 240V AC Plug-in QE25 QE2 QE2 QE240 QE250 QE260n QE25H QE2H QE2H QE240H QE250H QE260Hn -Pole Equipment Protection Equipment Protection QAF2/F/QE Accessories Wiring Diagrams Description Padlocking Device -Pole ECPLD Padlocking Device ECPLD2 Handle Block ECBX23M n Built to order. Allow 2 3 weeks for delivery. a UL Listed as SWD (Switching Duty) Rated, suitable for V AC Fluorescent Lighting. Siemens Industry, Inc. SPEEDFAX Product -9

2 Circuit s with INSTA-WIRE H H Continuous Current 0,000A IR 22,000A IR 65,000A 40 C -Pole Plug-In (V AC) e 0 Q0 5 Q5c Q5H c Q5HHn c Qc QH c QHHn c 25 Q25 Q25Hn Q25HHn Q QH QHHn 35 Q35n Q35Hn Q35HHn 40 Q40 Q40H Q40HHn 45 Q45n Q45Hn Q45HHn 50 Q50 Q50H Q50HHn 60 Q60 Q60Hn Q60HHn 0 Q0 Q0Hn Q0HHn Plug-In (Common-Trip /240V AC) 0 Q 5 Q25 Q25H Q25HH Q2 Q2H Q2HH 25 Q225 Q225Hn Q225HHn Q2 Q2H Q2HH 35 Q235 Q235Hn Q235HHn 40 Q240 Q240H Q240HHn 45 Q245 Q245Hn Q245HHn 50 Q250 Q250H Q250HH 60 Q260 Q260H Q260HH 0 Q20 Q20H Q20HH 80 Q280 Q280Hn Q280HHn 90 Q290 Q290H Q290HHn 00 Q0 Q0H Q0HH 0 Q QH QHHn 25 Q225 Q225H Q225HH Plug-In (Common-Trip 240V AC) 5 Q25R Q2R Q2R 40 Q240R 50 Q250R 60 Q260R 0 Q20R 00 Q0Rn 3-Pole Plug-In (Common-Trip 240V AC) 5 Q35 Q35H Q35HHn Q3 Q3H Q3HH 25 Q325 Q325Hn Q325HHn Q3 Q3H Q3HH 35 Q335 Q335Hn Q335HHn 40 Q340 Q340H Q340HH 45 Q345 Q345Hn Q345HHn 50 Q350 Q350H Q350HH 60 Q360 Q360H Q360HH 0 Q QH QHHn 80 Q380 Q380H Q380HHn 90 Q390 Q390H Q390HHn 00 Q0 Q0H Q0HH 03/06/3 Selection / H / H Internal Accessories Control Voltage AC Field/Factory Installed V Shunt Trip add suffix 00S0n Factory 24V Shunt Trip add suffix 00S0n Factory V Auxiliary Switch add suffix 0n b Factory Modifications Description 400 Hz Calibration add suffix Y h Marine 50 C Ambient Calibration add suffix M Fungus Proofing add suffix F For external accessories, please refer to page -93 n Built to order. Allow 2-3 weeks for delivery. a UL Listed for use with 60/5 wire through 40 amps, UL listed for use with 5 wire only for 50 amps and above, HACR rated. b A and B contacts. c UL Listed for frequent switching applications (SWD). V AC Fluorescent Lighting. d UL Listed for use on 3-phase grounded B systems 0,000 for this application. e Shipped 2 per sleeve. f Shipped 6 per sleeve. g Shipped 4 per sleeve. h UL Listed 5 KA IR. i, UL listed for 6 AWG conductors and multiple wires. - Siemens Industry, Inc. SPEEDFAX Product

3 Circuit s Duplex, Triplex and Quadplex Plug-In s Duplex Circuit s QT -Pole 0K AIC V AC Triplex Circuit s QT 0K AIC /240V AC Inner Poles Common Trip 5 5 Q55 Q55NC a 5 Q5 Q5NC a Q QNC a Q 5n Q5 Q Q QNC a SHIPPING: 2 per carton, (Wt. 4.8 lbs.) Single Pole Common-Trip 5 5 Q255CT 5 Q25CT 5 25 Q2525CTn 5 Q25CT 5 35 Q2535CTn 5 40 Q2540CT 5 45 Q2545CTn 5 50 Q2550CT Q2CT 25 Q225CTn Q2CT 35 Q235CTn 40 Q240CT 45 Q245CTn 50 Q250CT Q2CT SHIPPING: 6 per carton, (Wt. 4.9 lbs.) 04//3 Selection QT Duplex These space saver duplex breakers combine two independent /2" breaker poles in a common unit. This unit plugs into one load center stab and requires one panel space. HACR rated. QT Triplex These space saver triplex breakers provide a 2-pole common trip breaker for /240V AC circuits and two single poles for V AC circuits. Triplex require two panel spaces. HACR rated. Quadplex Circuit s QT 0K AIC /240V AC Inner and Outter 2 Poles Common Trip Common-Trip Inside Common-Trip Outside 5 5 Q255CT2 Q2CT2 Q2CT2 40 Q240CT2 Q2CT2 40 Q240CT Q24040CT2 50 Q250CT2 SHIPPING: 6 per carton, (Wt. 4.8 lbs.) QT Quadplex These space saver quadplex breakers provide two sets of common trip, two-pole breakers for /240V AC circuits, and require two panel spaces. HACR rated. For external accessories, please refer to page -93 For inches / millimeters conversion, see Application Data section. n Built to order. Allow 2 3 weeks for delivery. a Non-CTL. For replacement use only in panels manufactured before 968 Siemens Industry, Inc. SPEEDFAX Product -2

4 Circuit s Special Application s Selection HID Lighting For high-intensity discharge lamp loads having in-rush currents above the instantaneous trip setting of a standard breaker. -Pole V AC /240V AC Wiring Diagram Figure Figure 2 Complete UL Unenclosed 5 Q5HID a n QHID a QHID 5 Q25HID Q2HIDn Q2HIDn Molded Case Switch For applications that do not require overcurrent protection. -Pole V AC /240V AC Figure 00 Q00S Figure Q2S Q260S Q225S Switching Neutral No-Noise For applications that require a reduction in the 60-cycle hum of a standard breaker. /240V AC Figure 2 50 Q250NNn 60 Q260NN 0 Q20NN 90 Q290NNn Switching Neutrals Used where all conductors are required to be disconnected. Neutral pole of the circuit breaker does not connect to load center bus. One side is wired to neutral and the other side to the device. QG 2-Wire Common Trip V AC QG 3-Wire Common Trip /240V AC Figure 3 Figure QG25 QG2 QG2n QG35n QG3 QG3n Tungsten Lighting For high wattage, tungsten-lamp loads having in-rush currents above the instantaneous trip setting of a standard breaker. -Pole V AC Figure 5 Q5T a n QT a Water Heater Figure Figure 2 Figure 3 Figure 4 Figure 5 Water Heater When installed in a loadcenter, the water heater circuit breaker does not make electrical connection with the loadcenter bussing. Separate metered circuit is connected to line terminals of the breaker. Used in special rate water heating areas. Wiring Diagrams QW /40V AC Plug-In Figure 5 5 QW25 QW2 QW2 n Built to order. Allow 2 3 weeks for delivery. Note: All circuit breakers on this page are 0K AIC a UL Listed as SWD (Switching Duty) Rated, suitable for V AC Fluorescent Lighting. -22 Siemens Industry, Inc. SPEEDFAX Product

5 Circuit s 3/4 Inch Plug-In s Selection Features b 3/4" format b HACR Rated b UL Classified for use in certain Square D load centers QD Circuit s The QD circuit breaker line is available in -pole and 2-pole common trip versions listed on this page. The circuit breakers are UL Classified and UL Listed. All QD breakers are supplied with load side connectors suitable for 60/5 C wire and are calibrated for 40 C maximum ambient applications. UL Classified Siemens QD circuit breakers are UL Classified for use in specific Square D load centers in place of Square D QO circuit breakers. A Panelboard Compatibility List packaged with each QD breaker shows which type QD circuit breakers are acceptable for use in Square D load centers. The interrupting rating on these circuit breakers is 0,000A IR maximum and they are not series rated with Square D circuit breakers or equipment. This UL Classification allows a Siemens QD circuit breaker to be used in place of a Square D QO circuit breaker in those load centers that are specifically shown on the Panelboard Compatibility list. For additional information, contact your local Siemens sales engineer. -Pole Continuous Current V /240V Common 40 C 5 D5 a D25 D a D2 D D2 40 D40 D D50 D D60 D260 Shipping Weights of Per Shipping Poles Carton Weight (lbs.) Panelboard Compatibility List Listed Panelboards Square D s QO2LF/S QO2-4L0F/S QO2-4L0TS QO2-4L0RB QO6-2L00F/S QO6-2L00DF/S QO6-2L00TF/S QO6-2L00DTF/S QO6-2L00RB QO8-6L00F/S QO8-6L00DF/S QO8-6L00TF/S QO-6L00DTF/S QO8-6L00RB QO2M00/RB QO6M00/RB QOM00/RB QO24M00 QO2L00DF/S QO2L00RB QO2-M00/RB QO2-M00TF/S QO2M00/RB QO6-M00/RB QO6M00/RB QOM00/RB QO2L25G/RB QO2-24L25/RB QO2-24L25GWGC QO6L25G QO6-24L25G/RB QO2-24L25/RB QO-24L25G QO-24L25GWGC QOL25G QO24L25G/RB QO24M25/RB QO6L25/RB QO6-2M25FTRB QO6-24L25/RB QOL25/RB QO-24L25/RB QO24L25/RB QO-L50G QO-M50/RB QO24L50G QO24M50 QOL50G/RB QOM50/RB QO6L50/RB QO6M50/RB QO6-L50/RB QO8-6M50FTRB QO-M50/RB QO-M50TF/S QO-L50 QO24L50/RB QO24M50/RB QOL50/RB QOM50/RB QO8-6M0FT/RB QO2L0G/RB QO-40M0/RB QO-40M0TC QO24M0 QOL0G/RB QO-40M0 QO0/RB QO-40L0G/RB QO40M0/RB QO6L0/RB QO6M0/RB QO8-6M0FTRB QO-40L0/RB QO-40M0TF/S QO-40M0/RB QO24L0/RB QO24M0/RB QOL0/RB QOM0/RB QO-40L0/RB QO-40M0/RB QO40M0/RB QO40M225 QO42L225G/RB For inches / millimeters conversion, see Application Data section. a UL Listed for frequent switching applications (SWD). V AC Fluorescent Lighting. One or two load conductors. Siemens Industry, Inc. SPEEDFAX Product -23

6 Circuit s Main and Branch Circuit s a /05/3 Selection QN /240V AC QNH /240V AC 50 QN250 QN250R b 0 5 QN25n QN25R b n 0 0 QN20 QN20R b 0 50 QN250H QN250RH b 22 5 QN25Hn QN25RH b n 22 0 QN20H QN20RH b HQN250 HQN250R b 65 5 HQN25n 65 UL Interrupting s (ka) HQN /240V AC 0 HQN20 HQN20R b 65 Requires 4 panel spaces, 2 adjacent and 2 opposite. SHIPPING: per carton (Wt. 3 lbs.) Main Kits For use in Ultimate Load Centersd For use in EQIII Load Centers UL UL EQ MBK00A EQ MBK00 22 EQ MBK25A EQ96 25 MBK25 22 EQ MBK50A EQ MBK50 22 EQ MBK5n 22 EQ MBK0A EQ MBK0 22 EQ MBK225A EQ MBK UL Interrupting s (ka) QNR e EQ96XX QN e J c 3-Pole 240V AC 25 J J J 0 UL Interrupting s (ka) Requires 6 spaces due to cross over design. Fits only EQIII A 3-phase load centers SHIPPING: 5 per carton (Wt. lbs.) MBK (00,25)A MBK (50,0,225)A P /240V AC PH /240V AC HP /240V AC HPH /240V AC 25 Q225B 0 50 Q250B 0 5 Q25Bn 0 0 Q20B Q2225B 0 25 Q225BH Q250BH 22 5 Q25BHn 22 0 Q20BH Q2225BHn Q225BHHn Q250BHH 65 5 Q25BHHn 65 0 Q20BHH Q2225BHHn HQ0BHn HQ225BHn HQ250BHn 00 5 HQ25BHn 00 0 HQ20BHn HQ2225BHn 00 UL Interrupting s (ka) Volts AC /240 P J For inches / millimeters conversion, see Application Data section. n Built to order. Allow 2 3 weeks for delivery. a All circuit breakers on this page are common trip. b Reverse handle. c CSA Listed. d MBK00A for use in 00 and 25A load centers. MBK25A for use in 25A load centers. MBK50A for use in 50, 0 and 225A load centers. MBK0A for use in 0 and 225A load centers. MBK225A for use in 225A load centers. MBK5A for use in 0 and 225A load centers. e QNR required for horizontal applications or vertical applications where the lugs are facing up. The QN breaker is required for vertical applications where the lugs are facing down as shown. -24 Siemens Industry, Inc. SPEEDFAX Product

7 Circuit s Main and Branch Circuit s QS PowerMod's core offering of residential Meter Stacks, type WMM, offers the widest product offering & flexibility in the industry. Each meter stack houses the QuickSystem features to maximize productivity and minimize labor costs. To further simplify installation, our 225 Amp meter stacks feature the QS breaker. The QS breaker adds to the Siemens exclusive feature set in our Power Mod product line. Benefits and part numbers include: Front View An exclusive side wired design saves wiring space and eliminates difficult "S bends" No need for costly filler plates QS 225 Amp breaker takes the same space as standard 00 Amp s Single right hand bend wiring - saves time and wire Provides 00K AIC flexibility from 00 up to 225 Amps 0K to 00K AIC Series QS QS QSH QSHH HQS HQSH Amperage 0K AIC 22K AIC 42K AIC 65K AIC 00K AIC 00 QS0 QS0H QSH0 QS0HH HQS0H 25 QS225 QS225H QSH225 QS225HH HQS225H 50 QS250 QS250H QSH250 QS250HH HQS250H 5 QS25 QS25H QSH25 QS25HH HQS25H 0 QS20 QS20H QSH20 QS20HH HQS20H 225 QS2225 QS2225H QSH2225 QS2225HH HQS2225H QS Dimension Drawing CAUTION PRECAUCION A ON 2.22 NEUTRAL.99 OFF For PowerMod information, please refer to Section 2, page 2-49 Siemens Industry, Inc. SPEEDFAX Product -25

8 Circuit s Line Diagrams 06/3/4 Dimension Drawings -Pole 3-Pole 3" 2 3 /8" 3 /8", H, H QT F, HF, QE, QAF2, QAF2H EQ868, EQ8682 EQ8693, EQ8695, EQ8696 J QN, QNH, HQN QNR, QNRH, HQNR P, PH, HP, HPH a All standard circuit breakers are calibrated to 40 C maximum ambient application. -26 Siemens Industry, Inc. SPEEDFAX Product

9 Circuit s Lug Data Circuit Circuit LOAD SIDE Cables Per Connector Connector Wire Range, H, H, Plug-in 0 2 #4-#6 AWG Cu QT 5 35 #4 #6 AWG Cu #4 #6 AWG Al #8 #6 AWG Cu #8 #4 AWG Al #8-#2/0 AWG Cu #8-#2/0 AWG Al #4 #6 AWG Cu #4 #6 AWG Al 40 #8 AWG CU-Al F, HF 5 QAF2, QAFH2, QFGA2, QFGAH #8 #6 AWG Cu #8 #4 AWG Al #4 #0 AWG Cu #2 #8 AWG Al #8 #6 AWG Cu #8 #4 AWG Al #4 #2 AWG Cu #2 #0 AWG Al QD 5 2 #4 #8 AWG Cu Only #4 #2 AWG Cu 5 #2 #0 AWG Al #0 #8 AWG Cu #0 #6 AWG Al #8 #6 AWG Cu #8 #4 AWG Al QN, QNH, HQN 50 0 # 0kcmil Cu-Al QS, QSH, QSHH, HQS, HQSH #3 0kcmil Cu-Al EQ868-Ultimate 00 #4 3/0 AWG Cu-Al EQ8682-Ultimate 25 #4 3/0 AWG Cu-Al EQ8693-Ultimate 50 # 0kcmil Cu-Al 06/3/4 Reference EQ8695-Ultimate 0 # 0kcmil Cu-Al EQ8696-Ultimate 225 # 0kcmil Cu-Al P, PH, HP, HPH EQ965-EQIII 00 EQ96-EQIII 25 EQ9683-EQIII 50 EQ EQ9685-EQIII 0 EQ9686-EQIII 225 # AWG Cu #2/0 AWG Al #/0 AWG Cu #3/0 AWG Al #2/0 AWG Cu #4/0 AWG Al #3/0 AWG Cu 250kcmil AWG Al #4/0 AWG Cu 0kcmil AWG Al #8-#2/0 AWG Cu #8-#2/0 AWG Al #8-#2/0 AWG Cu #8-#2/0 AWG Al #/0 AWG Cu #3/0 AWG Al #3/0 AWG Cu 250kcmil AWG AL #3/0 AWG Cu 250kcmil AWG Al #4/0 AWG Cu 0kcmil AWG Al J 25 0 #2 0kcmil Cu-Al Siemens Industry, Inc. SPEEDFAX Product -2

10 Surge Protection Circuit and Surge Protective Device (SPD) Features 2 inch wide plug-on design Includes (2) Pole circuits breakers No loss of load center spaces Easy to install and perfect for retrofit LEDs provide protection status Circuit and Surge Protective Device (SPD) Benefits By installing a Siemens Circuit and Surge Protective Device (SPD) in the load center of the residence, surge protection is provided for all branch circuits. Two green LED indicator lights are provided to show that surge protection is provided for all circuits connected to the load center. These breakers should be used for circuit protection of frequently used household or facility circuits because the lights and devices connected to these circuits provide an effective indication that surge protection is being provided. The circuit breaker and SPD utilize Siemens-built 50V AC, 40mm, metal oxide varistors (MOVs). The maximum impulse rating for the SPD module is 40kA. The standard interrupting rating for the circuit breakers is 0k AIC. All circuit breakers and SPD are plug-on style, with load terminals provided. The devices are rated for /240V AC and are calibrated for 40 degrees C maximum ambient applications. Surge - Pole /240V AC 0K AIC (2) 5 (2) QSA55SPD QSASPD SPD SPD Amperage of Poles Initial Clamping Level Transient Energy Transient Suppression Voltage Peak Current (impulse) Discharge Voltage Characteristic Discharge Current Withstand Circuit Interrupting Listings/Certifications QSA55SPD QSASPD 5 or Amp (2) -Pole Circuit s 240 Volts 360 Joules line-to-neutral Joules line-to-line 500 volts peak, line-to-neutral 000 volts peak, line-to-line 40, ,000A, 800 volts (both line-to-neutral) 0,000 amperes line-to-neutral 0,000A, /240V AC UL, CSA Meets UL 449 3rd Edition For warranty information please refer to the surge website Siemens Industry, Inc. SPEEDFAX Product