Technical Data Manual Model Nos. and pricing: see Price List

Transcription

1 Tehnial Data Manual Model Nos. and priing: see Prie List Vitoell 100-V CVAA and CVA Series Indiret-fired domesti hot water storage tank 42 USG to 119 USG (160 L to 450 L) apaity Indiret-fired domesti hot water storage tank steel onstrution, with Ceraprotet enamel oating. Produt may not be exatly as shown CAUTION This tank version is not suitable for steam heating appliations. 12/2015

2 Produt Information Benefits Vitoell 100-V, CVA/CVAA Series Tehnial Data The vertial tank solution for ost-effiient domesti hot water supply. The Vitoell 100-V DHW tank offers storage apaities of up to 119 USG (450 L). Benefits at a glane: Corrosion-proteted steel tank shell with Ceraprotet enamel oating. Magnesium anode provides additional athodi tank protetion. Heat exhanger oil extends to the bottom of the tank, thereby heating the entire water ontent. Extremely onvenient domesti hot water supply assured by fast, uniform heating via generously sized heat exhanger surfaes. Certified to CSA Low Lead Content Certifiation Program; inluding US Safe Drinking Water At, NSF/ANSI 372 as well as other appliable US State requirements. Universally suitable - for appliations requiring larger quantities of hot water, multiple Vitoell 100-V tanks may be onneted to a header to form a tank battery. Inreased energy savings thanks to highly effetive, foamed-in-plae HCFC-free insulation keeping standby losses at a minimum. The vitoell-v USG (450 L) apaity tank is supplied with removable soft PET insulation for easier handling. 2

3 Vitoell 100-V, CVA/CVAA Series Tehnial Data Cross Setion Produt Information 3

4 Tehnial Data Tehnial Data Vitoell 100-V, CVA/CVAA Series Tehnial Data For domesti hot water heating appliations in onjuntion with hot water heating boilers Suitable for heating systems with: max. working pressure on the heat exhanger side of up to 150 psig (10 bar) max. working pressure on DHW side of up to 150 psig (10 bar) max. supply temperature on the heat exhanger side of up to 230 F (110 C) max. DHW supply temperature of up to 150 F (65.6 C) Tank series CVA CVA CVAA CVA Storage apaity USG (L) 42 (160) 53 (200) 79 (300) 119 (450) Reovery rates*1 MBH (kw) 136 (40) 136 (40) 180 (53) 238 (70) 194ºF (90ºC) with a DHW temperature GPH (L/h) 258 (982) 258 (982) 342 (1302) 456 (1720) inrease from 50 to 113ºF MBH (kw) 109 (32) 109 (32) 150 (44) 198 (58) 176ºF (80ºC) (10 to 45ºC) and a supply water GPH (L/h) 210 (786) 210 (786) 288 (1081) 378 (1425) temperature of... MBH (kw) 85 (25) 85 (25) 113 (33) 153 (45) 158ºF (70ºC) GPH (L/h) 162 (614) 162 (614) 216 (811) 294 (1106) MBH (kw) 58 (17) 58 (17) 78 (23) 109 (32) 140ºF (60ºC) GPH (L/h) 108 (417) 108 (417) 149 (565) 210 (786) MBH (kw) 31 (9) 31 (9) 61 (18) 82 (24) 122ºF (50ºC) GPH (L/h) 60 (221) 60 (221) 114 (442) 156 (589) Reovery rates*1 MBH (kw) 123 (36) 123 (36) 153 (45) 181 (53) 194ºF (90ºC) with a DHW temperature GPH (L/h) 164 (619) 164 (619) 204 (774) 240 (911) inrease from 50 to 140ºF MBH (kw) 95 (28) 95 (28) 116 (34) 150 (44) 176ºF (80ºC) (10 to 60ºC) and a supply water GPH (L/h) 120 (482) 120 (482) 156 (584) 198 (756) temperature of... MBH (kw) 65 (19) 65 (19) 78 (23) 113 (33) 158ºF (70ºC) GPH (L/h) 84 (327) 84 (327) 102 (395) 150 (567) Supply flow rate for the reovery rates stated GPM (m 3/ h) 13.2 (3.0) 13.2 (3.0) 13.2 (3.0) 13.2 (3.0) Insulation PUR Foam PUR Foam PUR Foam Soft PET Standby losses*2 MBH/24 h *1 When planning for the reovery rate as stated or alulated, allow for the orresponding irulation pump. The stated reovery rate is only ahieved when the rated output of the boiler is equal to or greater than that stated under Reovery rate. Please also refer to the orresponding sizing hart at the end of this manual. *2 Measured values are based on a room temp. of 68 F (20ºC) and a domesti hot water temp. of 149 F (65ºC) and an vary by 5%. *3 For other dimensions, see illustration and table on page 5. *4 Adjustable feet an be adjusted up to 2 in. (50 mm). For information regarding other Viessmann System Tehnology omponentry, please referene the doumentation of the respetive produt. 4 Dimensions *3 Tank length without insulation Overall length with insulation Tank width without insulation Overall width with insulation Tank height without insulation Overall height with insulation*4 Tilt height without insulation Tilt height with insulation 23 (581) 24 (605) 47 (1189) 50 (1260) 23 (581) 24 (605) 55b (1409) 57b (1460) 26a (667) 29a (744) 68a (1734) 72 (1825) 34 (859) 33 (837) 36a (923) 76 (1948) 72b (1844) 73a (1860) Weight Tank with insulation lbs (kg) 190 (86) 214 (97) 333 (151) 399 (181) Heat exhanger oil liquid ontent USG (L) 1.45 (5.5) 1.45 (5.5) 2.6 (10) 3.3 (12.5) Heat exhanger surfae area ft. 2 (m 2 ) 10.8 (1) 10.8 (1) 16.1 (1.5) 20.5 (1.9) Connetions Heating water supply/return Domesti old/hot water T&P valve Reirulation in. (male NPT thread) in. (male NPT thread) in. (female NPT thread) in. (male NPT thread) a 1

5 Vitoell 100-V, CVA/CVAA Series Tehnial Data CVA 42 and 53 USG (160 and 200 L) Tank Dimensions Tehnial Data Dimensions Storage apaity b d e f h USG (L) 42 (160) 53 (200) 2 (72) 9 (249) 25 (634) 35 (884) 41 (1050) 12b (317) 2 (72) 9 (249) 25 (634) 35 (884) 41 (1050) 12b (317) Legend IO Inspetion and lean-out opening D Drain BWR Boiler water return (upper oil) BWS Boiler water supply (upper oil) DCW Domesti old water AQ Aquastat well (at the same height as the boiler water supply onnetion) DHW Domesti hot water RT Reirulation tapping TPV Temperature and pressure relief valve MA Protetive magnesium anode 5

6 Tehnial Data CVAA 79 USG (300 L) Tank Dimensions Vitoell 100-V, CVA/CVAA Series Tehnial Data Dimensions Storage apaity USG (L) 79 (300) a b d e f g h j 13 (333) 3 (76) 10 (260) 34b (875) 44 (1115) 63 (1600) 26 (660) 14a (361) 4 (100) Legend IO Inspetion and lean-out opening D Drain BWR Boiler water return (upper oil) BWS Boiler water supply (upper oil) DCW Domesti old water AQ Aquastat well (at the same height as the boiler water supply onnetion) DHW Domesti hot water RT Reirulation tapping TPV Temperature and pressure relief valve MA Protetive magnesium anode 6

7 Vitoell 100-V, CVA/CVAA Series Tehnial Data CVA 119 USG (450 L) Tank Dimensions Tehnial Data Dimensions Storage apaity USG (L) 119 (450) a b d e f g h j 16b (422) 4 (100) 13 (349) 36a (924) 48b (1230) 70a (1784) 33 (837) 18 (455) 4 (100) Legend IO Inspetion and lean-out opening D Drain BWR Boiler water return (upper oil) BWS Boiler water supply (upper oil) DCW Domesti old water AQ Aquastat well (at the same height as the boiler water supply onnetion) DHW Domesti hot water RT Reirulation tapping TPV Temperature and pressure relief valve MA Protetive magnesium anode 7

8 Tehnial Data Water Flow Vitoell 100-V, CVA/CVAA Series Tehnial Data Domesti hot water draw rate Storage tank ontents heated to 140ºF (60ºC), boiler not reheating Storage apaity USG (L) 42 (160) 53 (200) 79 (300) 119 (450) Domesti draw rate GPM (L/min) 2.6 (10) 2.6 (10) 4.0 (15) 4.0 (15) Domesti hot water draw Water with t = 140ºF (60ºC) (onstant) USG (L) 32 (120) 38 (145) 63 (240) 111 (420) Perentage tank volume % Heat-up time The stated heating times are ahieved when the maximum reovery rate of the domesti hot water tank is made available at the respetive supply temperature and with a domesti hot water rise from 50 to 140 F (10 to 60 C). Storage apaity USG (L) 42 (160) 53 (200) 79 (300) 119 (450) Heating water supply temperature 194 F (90 C) 176 F (80 C) 158 F (70 C) Heat-up time (minutes) Pressure drop on heating water side (primary iruit) Pressure drop on domesti hot water side (seondary iruit) Legend A 42 USG (160 L) and 53 USG (200 L) storage apaities B 79 USG (300 L) storage apaity C 119 USG (450 L) storage apaity 8

9 Vitoell 100-V, CVA/CVAA Series Tehnial Data Multiple Tank Installation Produt Installation Tehnial Data The 79 and 119 USG (300 and 450 L) tank sizes may be ombined into a battery onsisting of between 2 and 3 tanks. Tank batteries onsisting of more than 3 tanks an be installed by reating up to 4 batteries, eah onsisting of 3 tanks. The heating ontrator is responsible to ensure proper piping on both the primary and seondary iruits. Tank series CVAA CVA Storage apaity USG (L) 79 (300) 119 (450) Total apaity of tank battery USG (L) 159 (600) 238 (900) 357 (1350) Number of storage tanks Reovery rates*1 with a DHW temperature inrease from 50 to 113ºF (10 to 45ºC) and a supply water temperature of... Reovery rates*1 with a DHW temperature inrease from 50 to 140ºF (10 to 60ºC) and a supply water temperature of... MBH (kw) 194ºF (90ºC) GPH (L/h) MBH (kw) 176ºF (80ºC) GPH (L/h) MBH (kw) 158ºF (70ºC) GPH (L/h) MBH (kw) 140ºF (60ºC) GPH (L/h) MBH (kw) 122ºF (50ºC) GPH (L/h) MBH (kw) 194ºF (90ºC) GPH (L/h) MBH (kw) 176ºF (80ºC) GPH (L/h) MBH (kw) 158ºF (70ºC) GPH (L/h) 361 (106) 690 (2604) 300 (88) 570 (2162) 225 (66) 426 (1622) 157 (46) 300 (1130) 123 (36) 234 (884) 307 (90) 408 (1548) 232 (68) 306 (1168) 157 (46) 210 (790) 477 (140) 906 (3440) 396 (116) 750 (2850) 307 (90) 582 (2212) 218 (64) 414 (1572) 164 (48) 312 (1178) 361 (106) 480 (1822) 300 (88) 402 (1512) 225 (66) 300 (1134) 716 (210) 1362 (5160) 593 (174) 1128 (4275) 460 (135) 876 (3318) 327 (96) 624 (2358) 246 (72) 468 (1767) 542 (159) 720 (2733) 450 (132) 600 (2268) 338 (99) 450 (1701) Supply flow rate for the reovery rates stated GPM (m 3/h ) 26.4 (6) 26.4 (6) 39.6 (9) Standby losses*2 MBH/24 h Dimensions Tank length without insulation Overall length with insulation Tank width without insulation Overall width with insulation Tank height without insulation Overall height with insulation Weight 57b (1495) 43b (1148) 69 (1734) 72b (1838) 48 (1218) 77 (1955) 111a (2826) 48 (1218) 77 (1955) Tank with insulation lbs (kg) 736a (334) 932 (423) 1409 (639) Heating water ontent USG (L) 6b (25) 8b (32) 13 (50) (heat exhanger pipe oil) Heat exhanger surfae area ft. 2 (m 2 ) 32a (3.0) 42 (3.9) 62b (5.8) *1 When planning for the reovery rate as stated or alulated, allow for the orresponding irulation pump. The stated reovery rate is only ahieved when the rated output of the boiler is equal to or greater than that stated under Reovery rate. Please also refer to the orresponding sizing hart at the end of this manual. *2 Measured values are based on a room temperature of 68 F (20ºC) and a domesti hot water temperature of 149 F (65ºC) and an vary by 5%. 9

10 Produt Installation Multiple Tank Installation (ontinued) Vitoell 100-V, CVA/CVAA Series Tehnial Data For domesti hot water appliations whih utilize modulating and low temperature hot water heating boilers or remote heating plants. 3 tanks 2 tanks Legend IO Inspetion and lean-out opening D Drain A Air vent BWR Boiler water return BWS Boiler water supply DCW Domesti old water DHW Domesti hot water RT Reirulation tapping TPV T&P valve top view Dimensions Tank series CVAA CVA Storage apaity 79 (300) 119 (450) Total apaity of battery USG (L) 159 (600) 238 (900) 357 (1350) Number of storage tanks USG (L) a b d e f 3 (76) 10a (260) 34b (875) 68a (1734) 14a (361) 8 (206) 4a (107) 13 (349) 36a (924) 70a (1948) 18 (455) 12b (320) 4a (107) 13 (349) 36a (924) 70a (1948) 18 (455) 12b (320) 10

11 Vitoell 100-V, CVA/CVAA Series Tehnial Data Multiple Tank Installation (ontinued) Produt Installation Domesti hot water draw rate Storage tank ontents heated to 140ºF (60ºC) Tank series CVAA CVA Storage apaity USG (L) 79 (300) 119 (450) Battery storage apaity USG (L) 159 (600) 238 (900) 357 (1350) Number of storage tanks Domesti draw rate GPM (L/min) 7.9 (30) 7.9 (30) 7.9 (30) Domesti hot water draw Water with t = 140ºF (60ºC) (onstant) USG (L) 127 (480) 222 (840) 333 (1260) Perentage tank volume % Quik reovery (over 10-minute period) Domesti hot water rise from 50 to 113 F (10 to 45 C) Tank series CVAA CVA Storage apaity USG (L) 79 (300) 119 (450) Battery storage apaity USG (L) 159 (600) 238 (900) 357 (1350) Number of storage tanks Heating water supply temperature 194 F (90 C) 176 F (80 C) 158 F (70 C) USG/10 min (L/10 min) USG/10 min (L/10 min) USG/10 min (L/10 min) Quik DHW reovery (over 10-minute period) 201 (759) 197 (745) 192 (728) 304 (1150) 287 (1088) 268 (1016) 425 (1610) 401 (1520) 370 (1400) Max. domesti hot water draw rate (over 10-minute period) Domesti hot water rise from 50 to 113 F (10 to 45 C) Tank series CVAA CVA Storage apaity USG (L) 79 (300) 119 (450) Battery storage apaity USG (L) 159 (600) 238 (900) 357 (1350) Number of storage tanks Heating water supply temperature 194 F (90 C) 176 F (80 C) 158 F (70 C) GPM (L/min) GPM (L/min) GPM (L/min) Max. DHW draw rate (over 10-minute period) 20.1 (76) 20 (74) 19.3 (73) 30 (115) 29 (109) 27 (102) 43 (161) 40 (152) 37 (140) 11

12 Produt Installation Standard Equipment Vitoell 100-V, CVA/CVAA Series Tehnial Data This is a simplified oneptual drawing only! Piping and neessary omponentry must be field verified. Proper installation and funtionality in the field is the responsibility of the heating ontrator. Legend A Domesti hot water supply B DHW reirulation line C DHW reirulation pump D Spring-loaded flow hek valve E Disharge pipe F Temperature and pressure relief valve (TPV) G Shut-off valve H Drain K Domesti old water supply lines L Bakflow preventer M Domesti old water inlet N Preharged expansion tank (required where bakflow preventer is installed; hek loal plumbing odes and requirements) O Thermostati mixing valve/anti-sald valve for solar appliations (field supplied) Vitoell 100-V 42 to 79 USG (160 to 300 L) apaity Domesti hot water storage tank of high-grade steel with PUR Foam insulation (HCFC-free) and Ceraprotet enamel oating with: thermometer adjustable leveling feet built-in aquastat well Magnesium anode The following is paked separately and attahed to the rate: installation fittings pakage: with the neessary hardware temperature and pressure relief valve. Eletrostatially powder-oated sheet metal enlosure panel in a Vitosilver finish. Vitoell 100-V 119 USG (450 L) apaity Domesti hot water storage tank of high-grade steel with wrap-around soft PET insulation (HCFC-free) and Ceraprotet enamel oating with: thermometer adjustable leveling feet built-in aquastat well Magnesium anode The following is paked separately and attahed to the rate: installation fittings pakage: with the neessary hardware temperature and pressure relief valve. Syntheti wrap-around enlosure panel in a Vitosilver finish. 12

13 Vitoell 100-V, CVA/CVAA Series Tehnial Data Standard Equipment (ontinued) Produt Installation Bakflow preventers Where bakflow preventers are required, a domesti water expansion tank installation is reommended in the old water inlet piping before the old water enters the Vitoell. For the bakflow devie, observe loal plumbing odes and regulations. Temperature and pressure relief valve A temperature and pressure relief valve (T&P relief valve) is supplied with the tank. The heating ontrator must install the valve on eah tank in a method meeting ode requirements. If loal odes require a different relief valve, substitute the manufaturer s supplied valve. The tank is approved for 150 psig. Maximum operating pressure is 150 psig. The T&P relief valve supplied with the tank is tested under ANSI Z21.22 Code for Relief Valves and Automati Gas Shut-off Devies for Hot Water Supply Systems. IMPORTANT Sine the heat exhanger oil allows for high MBH input (see Vitoell flow harts), onfirmation that the appropriate and orret size pressure and temperature relief valve is used and installed, is neessary. T&P Valve ASME pressure steam rating CSA temperature steam rating Relief temperature Inlet thread Outlet thread 100 psig 150 psig (where CRN is required) see ratings marked on T&P valve 205 MBH 210 F (99 C) male female Warranty Our warranty for domesti hot water tanks states that the water heated must be of drinking (potable) water quality and that any water treatment equipment in use must funtion orretly. Viessmann aepts no responsibility for damage howsoever aused and reserves the right to withdraw the produt warranty if the produt has been improperly installed or misapplied by the installer, ontrator or final user. In order to qualify for produt warranty, strit adherene to the installation and servie manuals must be assured. In the event that Viessmann nonapproved omponents are utilized, Viessmann reserves the right to withdraw all expressed or implied warranties without written notie. The water to be heated with the Vitoell must be drinking (potable) water quality. If the tank is used to heat other media, the warranty will be null and void. Damage resulting from exessive pressure or temperature is learly not the responsibility of Viessmann. The amount of hloride and sulfate aeptable to the tank is limited. In areas where high onentrations of hloride and sulfate are present in drinking water, please onsult Viessmann for diretions. Sensor Well Vitoell 100-V, 42 to 119 USG (160 to 450 L) apaity The sensor well is welded into the domesti hot water storage tank. 13

14 Sizing Continuous Flow Capaity Chart Vitoell 100-V, CVA/CVAA Series Tehnial Data CVA, 42 and 53 USG (160 and 200 L) apaities Curve A Domesti hot water 40 to 113 F (4 to 45 C) Curve B Domesti hot water 40 to 140 F (4 to 60 C) 14

15 Vitoell 100-V, CVA/CVAA Series Tehnial Data Continuous Flow Capaity Chart (ontinued) Sizing CVAA, 79 USG (300 L) apaity Curve A Domesti hot water 40 to 113 F (4 to 45 C) Curve B Domesti hot water 40 to 140 F (4 to 60 C) 15

16 Sizing Continuous Flow Capaity Chart (ontinued) Vitoell 100-V, CVA/CVAA Series Tehnial Data CVA, 119 USG (450 L) apaity Curve A Domesti hot water 40 to 113 F (4 to 45 C) Curve B Domesti hot water 40 to 140 F (4 to 60 C) 16

17 Vitoell 100-V, CVA/CVAA Series Tehnial Data Continuous Flow Capaity Chart (ontinued) Sizing Example: CVA, 119 USG (450 L) apaity Assume the boiler output to the tank is 170 MBH. Enter hart at left and draw horizontal line aross to reovery rate of 203 GPH or 3.4 GPM for 140 F (60 C) domesti hot water under olumn B. Where the horizontal line intersets the 194 F (90 C) urve is the point of intersetion for the diagonal line used to size the pump. The diagonal line begins at the origin and goes through the point of intersetion extending up to the top of the hart. Read between the referene diagonal lines to get a pump speifiation of 11.9 GPM at 5 ft. To summarize: For a Vitoell-V 100 with 119 USG (450 L) apaity and 170 MBH input, the boiler water temperature is 194 F (90 C), differene between boiler return and supply water temperature is 31 F (17 C), reovery rate is 3.4 GPM of 140 F (60 C) DHW, and the pump required is 11.9 GPM, 5 ft. plus pressure drop in piping and boiler. 17

18 Vitoell 100-V, CVA/CVAA Series Tehnial Data 18

19 Vitoell 100-V, CVA/CVAA Series Tehnial Data 19

20 Vitoell 100-V, CVA/CVAA Series Tehnial Data Tehnial information subjet to hange without notie. Printed on environmentally friendly (reyled and reylable) paper.