Interface Module Adapter SIMATIC S7-300, 400 and 1500
|
|
|
- Everett Homer Thompson
- 7 years ago
- Views:
Transcription
1 s Interface Module dapter SIMTIC S7-300, 400 and 1500 Version /2016 Page 1
2 Innova on on economical base When we are talking to our customers there always seems to be a common problem: many plants are s ll opera ng with automa on systems of the previous genera on and although the performance is s ll sufficient, it will become increasingly difficult to get spare parts and to have an efficient service in the future. To be up to date, it will be necessary to replace the exis ng system with a modern unit. But quite o en this decision is delayed by the fear of disrup on of the running produc on and the inconvenience of longterm trouble shoo ng in case of incorrect wiring. Retrofit at ease xample: S7-400 The Interface Module dapter for SIMTIC S7-300 or SIMTIC S7-400 links the old with the new, field proven produc on systems with the latest achievements in automa on systems. You simply take off the front plug of the I/O units, replace the automa on system by a S7, plug in the IM and fix the front plug back on to the adapter. ll is done easily by plug-ins. nd a er actualisa on of the STP 7 so ware you can con nue with you produc on. Version /2016 Page 2
3 dvantages are obvious There are low engineering costs in the hardware, only a replacement of the controller is necessary. ll wiring remains at ist place Schema c diagrams don t have to be revised; signal lists are automa cally updated by the so ware. The shutdown me of the produc on is reduced. This procedure not only saves a lot of me and money, but also reduces errors. Contact Thomas Hener telephone: 49 (711) fax: 49 (711) thomas.hener@siemens.com Gerhard Rossel telephone: 49 (172) (711) fax: 49 (711) gerhard.rossel@siemens.com SIMNS G RC-D DF S-VS 7 1 Weissacher Str. 11 D Stu gart Zer fikat: U Version /2016 Page 3
4 Types of controllers The use of IM is provided for the following controllers: S5 115 U S5 130 W/K S5 135 U S5 150 U S5 155 S/U S5 150 K utoma on device is the S7-300, S7-400 or S Digital Input: The digital inputs are classified by the following technical features: Number of channels: 8/16/32 Poten al separa on: internal / external Grouping of channels: 1/4/8/16/32 Signal voltage: TTL/24=/60=/115~/230~ Switching frequency Type of connector: Screw/Crimp 42/20-poles Space requirement: single / double space Interrupt signal nable signal Unit encoding ddress encoding Digital Output: The digital outputs are classified by the following technical features: Number of channels: 8/16/32 Poten al separa on: internal / external Grouping of channels: 1/4/8/16/32 Signal voltage: TTL/24=/60=/115~/230~ Switching frequency Type of connector: Screw/Crimp 42/20-poles Space requirement: single / double space Short circuit protec on: none / fuse / electronic Switching Capacity: 0,1/0,5/2 Voltage limita on Unit encoding ddress encoding ll these specifica ons must be considered before replacement. Version /2016 Page 4
5 Structure with S7-300 Moun ng angle For S7-300 rail Front connector S7-300 Connec ng cable ma ng connector for S5 front connector Rail for S S Case with printed circuit board Technical data: Case with printed circuit board : H x B x T = 330 x 27 x 70 mm Connec ng cable: l= 500mm Moun ng angle Set: H = 150 to 280 mm, B = 80 mm S7-rail and S7-300 are not included. Version /2016 Page 5
6 Structure with S7-400 ma ng connector for S5 front connector S7-front connector with prited circuit board Dimensions adapter 237mm- S mm - S5 135U mm- S5 115 U 259 mm S5 150K.. H x B x T = 290 x 25 x 70 mm 70 dapter Frontstecker Moun ng depth: S7 400: 237mm70mm dapter S5 150U S5 150K S5 115U 225mm 259mm 234mm 297 Version 4.1 Page 6 01/2016
7 Structure with S Case with printed circuit board Connec ng cable Rail 6S Front connector S ma ng connector for S5 front connector Rail 6S Technical data: Case with printed circuit board : H x B x T = 330 x 27 x 70 mm Connec ng cable: l= 500mm Moun ng angle Set: H = 150 to 280 mm, B = 80 mm S7-rails and S are not included. Version /2016 Page 7
8 Powersupply Separa on of poten als 230V~ 230V~ There are floa ng or non-floa ng IOs. Netzgerät 24V DC Netzgerät 24V DC In both cases the power for the module has to be supplied by the user. 24VDC L L- Potentialfrei 24VDC L L- nother criterion is the short circuit protec on of the signals. The outputs have to be tested for the ra ng of the pins and the printed conductor. Therefore the power supply of signals is rooted in groups of 1/2/4/8/16. Potentialgebunden Version /2016 Page 8
9 Version /2016 Page 9 L1 L2 L3 PN P _ ~ ~ 1L 2L 1M DC I0.0 I0.1 I0.2 I0.3 C I0.4 I0.5 I0.6 I0.7 2M 2M 1M I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 2M 1M dapter L I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 1N 2N L1 1L 2L 1N 2N I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 dapter I0.0 1N 2N L S5 S7 S5 S7 nlage nlage Powersupply of inputs Powersupply of inputs L1 L2 L3 PN P _ ~ ~ 1L 2L DC I0.0 I0.1 I0.2 I0.3 C I0.4 I0.5 I0.6 I0.7 I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 dapter 1L 2L nlage S5 S7 1L M 1L 2L 2L M M M I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 I0.0 I0.1 I0.2 I0.3 I0.4 I0.5 I0.6 I0.7 dapter nlage S5 S7 M M 1N 2N 1L 2L 1L 2L
10 Version /2016 Page 10 Roo ng - 4 er-wurzelung er-wurzelung 8er-Wurzelung er-wurzelung er-wurzelung er-wurzelung 32 32
11 Conditions of Sale The Interface Module dapters 6Z UG.. are intended to be used between the front-plugs on the I- O-modules of an obsolete controller and a modern replacement controller SIMTIC S7. Hereby all installa- on remains at its place; only the controller and the respec ve so ware have to be subs tuted. For the subs tu on of the up-to-now-used units the best matching units of S7- components were selected. However there remains a certain devia on in the specific performance. It is up to the user to check the limita ons of his own installa on, in par cular the: Power supply Signal voltage Line-frequency Limits of I-O-defini ons Roo ng Number of channels Loading capacity Ra ng of connectors Signal switching frequency If the S7-units do require an external applica on of /- poten als and the old installa on did not supply them, these poten als have to be brought to the terminal block on the adapter or to the S5 front connector. If the power-roo ng of the old installa on is not corresponding to the new requirements, the user has to install the addi onal jumpers. If the old installa on was fed from different power sources, an equipoten al bonding contactor has to be applied. The enable signal of the S5 units is not present in the S7-system in an iden cal way and may be considered on handling. The parametering and selec on of modes in the I/O units has to be done according to the requirements of the S7. Version /2016 Page 11
12 S5_115U --> S7_300 S5 module I/O Voltage Current dapter S7 module 6S L11 32 DI 24 VDC 6Z2041-8UG02-0D0 6S BL S L12 32 DI 24 VDC 6Z2041-8UG02-0D0 6S BL S L11 16 DI 24/48 VUC 6Z2041-8UG02-0D1 6S CH S L11 16 DI VUC 6Z2041-8UG02-0D1 6S CH S L12 8 DI 24 VDC 6Z2041-8UG02-0D2 6S CH S L11 16 DI 115 VUC 6Z2041-8UG02-0D3 6S FH S LB11 16 DI 115 VUC 6Z2041-8UG02-0D4 6S FF S LC11 8 DI 115 VUC 6Z2041-8UG02-0D5 6S FF S L11 16 DI 230 VUC 6Z2041-8UG02-0D3 6S FH S LB11 16 DI 230 VUC 6Z2041-8UG02-0D4 6S FF S LC11 8 DI 230 VUC 6Z2041-8UG02-0D5 6S FF S L13 32 DO 24 VDC 0,5 6Z2041-8UG02-0D0 6S BL S L12 32 DO 24 VDC 0,5 6Z2041-8UG02-0D0 6S BL S L21 32 DO 24 VDC 0,5 6Z2041-8UG02-0D0 6S BL S L11 16 DO VDC 0,5 6Z2041-8UG02-0D1 6S GH00-0B0 6S L12 16 DO 24 VDC 2 6Z2041-8UG02-0D2 6S BF S L11 16 DO 115/230 VC 1 6Z2041-8UG02-0D5 6S FF S LB11 8 DO 115/230 VC 2 6Z2041-8UG02-0D6 6S FF00-0B0 6S L12 16 DO Rel 0,5 6Z2041-8UG02-0D7 6S HF00-0B0 6S LB11 8 DO Rel 5 6Z2041-8UG02-0D8 6S HF00-0B0 6S LC11 16 DO Rel 5 6Z2041-8UG02-0D9 6S HF00-0B0 6S L11 16D/16D 24 VDC 0,5 6Z2041-8UG S BL S L13 8 current and voltage metering 6Z2041-8UG S KF02-0B0 6S L13 8 only current metering 6Z2041-8UG S NF00-0B0 6S L13 8 only voltage metering 6Z2041-8UG S NF00-0B0 6S L13 16 current and voltage metering 6Z2041-8UG S KF02-0B0 6S L13 8 only PT100 6Z2041-8UG S PF01-0B0 6S L13 8 only PT100 6Z2041-8UG S KF01-0B0 6S L13 8 current and voltage output 6Z2041-8UG S HD01-0B0 6S L13 8 current and voltage output 6Z2041-8UG S HF00-0B0 6S LB13 8 only voltage output 6Z2041-8UG S HD01-0B0 6S LB13 8 only voltage output 6Z2041-8UG S HF00-0B0 6S LC13 8 current and voltage output 6Z2041-8UG S HD01-0B0 6S LC13 8 current and voltage output 6Z2041-8UG S HF00-0B0 6Z2041-8UG02-0DU0 6Z2041-8UG02-0DU1 open ended terminal adapter
13 S5_115U --> S7_300 ccessories 6Z2041-8UG00-0BG0 Mounting angle (2 pieces) max. allowable 48V switched on 2 S7-modules only 16DI/DO only C and switched on 2 S7- modules M must be wired N must be wired and switched on 2 S7-modules only C in-phase
14 S5_115U --> S7_400 S5 module I/O Voltage Current dapter S7 module 6S L11 32 DI 24 VDC 6Z2041-8UG05-0U36 6S BL S L12 32 DI 24 VDC 6Z2041-8UG05-0U36 6S BL S L11 16 DI 24/48 VUC 6Z2041-8UG65-0U22 6S DH00-0B0 6S L11 16 DI VUC 6Z2041-8UG65-0U22 6S DH00-0B0 6S L12 8 DI 24 VDC 6Z2041-8UG05-0U10 6S DH00-0B0 6S L11 16 DI 115 VUC 6Z2041-8UG55-0U22 6S FH S LB11 16 DI 115 VUC 6Z2041-8UG55-0U21 6S FH S LC11 8 DI 115 VUC 6Z2041-8UG55-0U10 6S FH S L11 16 DI 230 VUC 6Z2041-8UG55-0U22 6S FH S LB11 16 DI 230 VUC 6Z2041-8UG55-0U21 6S FH S LC11 8 DI 230 VUC 6Z2041-8UG55-0U10 6S FH S L13 32 DO 24 VDC 0,5 6Z2041-8UG05-0U33 6S BL S L12 32 DO 24 VDC 0,5 6Z2041-8UG05-0U33 6S BL S L21 32 DO 24 VDC 0,5 6Z2041-8UG05-0U33 6S BL S L12 16 DO 24 VDC 2 6Z2041-8UG05-0U22 6S BH S L11 16 DO 115 VC 2 6Z2041-8UG45-0U21 6S HH S L11 16 DO 230 VC 1 6Z2041-8UG55-0U22 6S FH S LC11 16 DO Rel 5 6Z2041-8UG65-0U22 6S HH00-0B0 6S L13 8 only current metering 6Z2041-8UG75-0U11 6S KF00-0B0 6S L13 8 only voltage metering 6Z2041-8UG75-0U12 6S KF00-0B0 6S L13 8 only PT100 6Z2041-8UG75-0U20 6S KF10-0B0 6S L13 8 current and voltage metering 6Z2041-8UG75-0U21 6S QH00-0B0 6S L13 8 current and voltage metering 6Z2041-8UG75-0U21 6S HH00-0B0 6S L13 8 current and voltage outout 6Z2041-8UG75-0U11 6S HF00-0B0 6S LB13 8 only voltage output 6Z2041-8UG75-0U11 6S HF00-0B0 6S LC13 8 current and voltage outout 6Z2041-8UG75-0U11 6S HF00-0B0 ttention: Front connector with double width needs more place!
15 S5_135_155U --> S7_400 S5 module I/O Voltage Current dapter S7 module 6S U14 32 DI 24 VDC 6Z2041-8UG07-0U36 6S BL S U14 32 DI 24 VDC 6Z2041-8UG07-0U36 6S BL S U12 16 DI 24/60 VDC 6Z2041-8UG07-0U20 6S DH00-0B0 6S U12 32DI 24 VDC 6Z2041-8UG07-0U33 6S BL S U12 16 DI 24/60 VDC 6Z2041-8UG37-1U23 6S DH00-0B0 6S U12 16 DI 115/230 VC 6Z2041-8UG57-1U23 6S FH S UB12 8 DI 115/230 VC 6Z2041-8UG57-1U20 6S FH S U14 32 DO 24 VDC 0,5 6Z2041-8UG07-0U36 6S BL S U14 32 DO 24 VDC 0,5 6Z2041-8UG07-0U37 6S BL00-0B0 6S U14 32 DO 24 VDC 0,5 6Z2041-8UG07-0U37 6S BL00-0B0 6S U14 32 DO 24 VDC 0,5 6Z2041-8UG07-0U36 6S BL S U14 16 DO 24 VDC 2 6Z2041-8UG07-1U23 6S BH S U14 16 DO 115/230 VC 2 6Z2041-8UG57-1U23 6S FH S UC11 16 DO Relais 5 6Z2041-8UG67-0U23 6S HH S U13 8 I only current metering 6Z2041-8UG77-0U11 6S KF00-0B0 6S U13 8 I only voltage metering 6Z2041-8UG77-0U12 6S KF00-0B0 6S U13 8 I only PT100 6Z2041-8UG77-0U20 6S KF10-0B0 6S U13 16 I current and voltage metering 6Z2041-8UG77-0U21 6S HH00-0B0 6S U13 16 I current and voltage metering 6Z2041-8UG77-0U21 6S QH00-0B0 6S U13 8 O only current output 6Z2041-8UG77-0U11 6S HF00-0B0 6S UC13 8 O only current output 6Z2041-8UG77-0U11 6S HF00-0B0 6S U13 8 O only voltage output 6Z2041-8UG77-0U12 6S HF00-0B0 6S UB13 8 O only voltage output 6Z2041-8UG77-0U12 6S HF00-0B0 6S UC13 8 O only voltage output 6Z2041-8UG77-0U12 6S HF00-0B0 ttention: Front connector with double width needs more place!
16 S5_135_155U --> S7_300 S5 module I/O Voltage Current dapter S7 module 6S U14 32 DI 24 VDC 6Z2041-8UG01-0D0 6S BL S U14 32 DI 24 VDC 6Z2041-8UG01-0D0 6S BL S U12 16 DI 24/60 VDC 6Z2041-8UG01-0D1 6S CH S U12 32DI 24 VDC 6Z2041-8UG01-0D2 6S BL S U12 16 DI 24/60 VDC 6Z2041-8UG01-0D3 6S CH S U12 16 DI 115/230 VC 6Z2041-8UG01-0D4 6S FH S UB12 8 DI 115/230 VC 6Z2041-8UG01-0D5 6S FF S U14 32 DO 24 VDC 0,5 6Z2041-8UG01-0D0 6S BL S U14 32 DO 24 VDC 0,5 6Z2041-8UG01-0D0 6S BL S U14 16 DO 24 VDC 2 6Z2041-8UG01-0D2 6S BF S U12 16 DO 115/230 VC 2 6Z2041-8UG01-0D3 6S FF S UB12 8 DO 115/230 VC 2 6Z2041-8UG01-0D4 6S FF00-0B0 6S UC11 16 DO Relais 5 6Z2041-8UG01-0D5 6S HH01-0B0 6S U11 16DI/16DO 24 VDC 0,5 6Z2041-8UG S BL S U20 16DI/16DO 24 VDC 0,5 6Z2041-8UG S BL S U13 8 I current and voltage metering 6Z2041-8UG S KF02-0B0 6S U13 8 I only PT100 6Z2041-8UG S PF01-0B0 6S U13 8 I only current metering 6Z2041-8UG S NF00-0B0 6S U13 8 I only voltage metering 6Z2041-8UG S NF00-0B0 6S U13 16 I current and voltage metering 6Z2041-8UG S KF02-0B0 6S U13 8 I only PT100 6Z2041-8UG S PF01-0B0 6S U13 8 I only PT100 6Z2041-8UG S KF01-0B0 6S U13 8 O current and voltage outout 6Z2041-8UG S HD01-0B0 6S U13 8 O current and voltage outout 6Z2041-8UG S HF00-0B0 6S UB13 8 O only voltage output 6Z2041-8UG S HD01-0B0 6S UC13 8 O only voltage output 6Z2041-8UG S HF00-0B0 6S UC13 8 O current and voltage outout 6Z2041-8UG S HD01-0B0 6S U13 8 O current and voltage outout 6Z2041-8UG S HF00-0B0 6Z2041-8UG01-0DU1 6Z2041-8UG01-0DU0 Klemmenadapter open ended ccessories 6Z2041-8UG00-0BG0 Mounting angle (2 pieces) max. allowable 48V switched on 2 S7-modules only 16DI/DO only C and switched on 2 S7- modules M must be wired N must be wired and switched on 2 S7-modules
17 S5_130_150K --> S7_300 S5 module I/O Voltage Current dapter S7 module 6S B11 32 DI 24 VDC 6Z2041-8UG03-0D0 6S BL S B11 32 DI 24 VDC 6Z2041-8UG03-0D0 6S BL S B11 16 DI VDC 6Z2041-8UG03-0D1 6S CH S DO 24 VDC 10 m 6Z2041-8UG03-0D0 6S BL S DO 24 VDC 2 6Z2041-8UG03-0D1 6S BF S DO 24 VDC 0,5 6Z2041-8UG03-0D2 6S BL S DO VDC 0,12 6Z2041-8UG03-0D2 6S BL S DO 24 VDC 0,5 6Z2041-8UG03-0D3 6S BH01-00 ccessories 6Z2041-8UG00-0BG0 Mounting angle (2 pieces) max. allowable 48V N must be wired and switched on 2 S7-modules M must be wired
18 S5_130_150K --> S7_400 S5 module I/O Voltage Current dapter S7 module 6S B11 32 DI 24 VDC 6Z2041-8UG08-0D0 6S BL S B11 32 DI 24 VDC 6Z2041-8UG08-0D0 6S BL S B11 16 DI VDC 6Z2041-8UG08-0D1 6S DH S DO 24 VDC 10 m 6Z2041-8UG08-0D1 6S BL S DO 24 VDC 2 6Z2041-8UG08-0D2 6S BH S DO 24 VDC 0,5 6Z2041-8UG08-0D0 6S BL S DO VDC 0,12 6Z2041-8UG08-0D0 6S BL S DO 24 VDC 0,5 6Z2041-8UG08-0D3 6S BH11-00 M must be wired
19 S5_135_155U --> S7_1500 S5 module I/O Voltage current- dapter S7 module 6S U14 32 DI 24 VDC 6Z2041-8UG11-0D0 6S BL00-0B0 6S U14 32 DI 24 VDC 6Z2041-8UG11-0D0 6S BL00-0B0 6S U12 16 DI 24/60 VDC 6Z2041-8UG11-0D1 6S BH00-0B0 6S U12 32DI 24 VDC 6Z2041-8UG11-0D2 6S BL00-0B0 6S U12 16 DI 115/230 VC 6Z2041-8UG11-0D4 6S FH S UB12 8 DI 115/230 VC 6Z2041-8UG11-0D5 6S FH S U14 32 DO 24 VDC 0,5 6Z2041-8UG11-0D0 6S BL00-0B0 6S U14 32 DO 24 VDC 0,5 6Z2041-8UG11-0D0 6S BL00-0B0 6S U14 16 DO 24 VDC 2 6Z2041-8UG11-0D1 6S BH00-0B0 6S U14 16 DO 24 VDC 2 6Z2041-8UG11-0D2 6S BF00-0B0 6S U12 16 DO 115/230 VC 2 6Z2041-8UG11-0D3 6S FF00-0B0 6S U12 16 DO 115/230 VC 2 6Z2041-8UG11-0D4 6S HF00-0B0 6S UB12 8 DO 115/230 VC 2 6Z2041-8UG11-1D3 6S FF00-0B0 6S U12 16 DO 115/230 VC 2 6Z2041-8UG11-1D4 6S HF00-0B0 6S UC11 16 DO Relais 5 6Z2041-8UG11-2D4 6S HF00-0B0 6S UC11 16 DO Relais 5 6Z2041-8UG11-0D5 6S HH00-0B0 6S U13 8 I voltage metering / PT100 6Z2041-8UG S KF00-0B0 6S U13 8 I voltage metering / PT100 6Z2041-8UG S NF10-0B0 current- metering 2-wiretransducer 6S U13 8 I 6Z2041-8UG S KF00-0B0 current- metering 2-wiretransducer 6S U13 8 I 6Z2041-8UG S NF10-0B0 current- metering 4-wiretransducer 6S U13 8 I 6Z2041-8UG S KF00-0B0 current- metering 4-wiretransducer 6S U13 8 I 6Z2041-8UG S NF10-0B0 6S U13 16 I voltage metering 6Z2041-8UG S KF00-0B0 6S U13 16 I voltage metering 6Z2041-8UG S NF10-0B0 current- metering 2-wiretransducer 6S U13 16 I 6Z2041-8UG S KF00-0B0 current- metering 2-wiretransducer 6S U13 16 I 6Z2041-8UG S NF10-0B0 current- metering 4-wiretransducer 6S U13 16 I 6Z2041-8UG S KF00-0B0 current- metering 4-wiretransducer 6S U13 16 I 6Z2041-8UG S NF10-0B0 PT100 measuringmodule 6S U13 16 I 6Z2041-8UG S KF00-0B0 6S S U13 8 O current-- / voltage metering 6Z2041-8UG S HD00-0B0 6S UB13 8 O current- / voltage metering 6Z2041-8UG S HD00-0B0 6S UC13 8 O current- / voltage metering 6Z2041-8UG S HD00-0B0
20 S5_135_155U --> S7_1500 S5 module I/O Voltage current- dapter S7 module 6S U13 8 O current- / voltage metering 6Z2041-8UG S HF00-0B0 6S UB13 8 O current- / voltage metering 6Z2041-8UG S HF00-0B0 6S UC13 8 O current- / voltage metering 6Z2041-8UG S HF00-0B0 6Z2041-8UG01-0DU1 6Z2041-8UG01-0DU0 6Z2041-8UG00-0BG0 terminal adapter open ended mounting angle (2 pieces) switched on 2 S7-modules, S7- module with 0.5 observe technical data of S7-module switched on 2 S7-modules
21 S5_115U --> S7_1500 S5 module I/O Voltage Current dapter S7 module 6S L11 32 DI 24 VDC 6Z2041-8UG12-0D0 6S BL00-0B0 6S L12 32 DI 24 VDC 6Z2041-8UG12-0D0 6S BL00-0B0 6S L11 16 DI 24/48 VUC 6Z2041-8UG12-0D1 6S BH00-0B0 6S L12 8 DI 24 VDC 6Z2041-8UG12-0D2 6S BH00-0B0 6S L11 16 DI 115 VUC 6Z2041-8UG12-0D3 6S FH S LB11 16 DI 115 VUC 6Z2041-8UG12-0D4 6S FH S L11 16 DI 230 VUC 6Z2041-8UG12-0D3 6S FH S LB11 16 DI 230 VUC 6Z2041-8UG12-0D4 6S FH S L13 32 DO 24 VDC 0,5 6Z2041-8UG12-0D0 6S BL00-0B0 6S L12 32 DO 24 VDC 0,5 6Z2041-8UG12-0D0 6S BL00-0B0 6S L21 32 DO 24 VDC 0,5 6Z2041-8UG12-0D0 6S BL00-0B0 6S L11 16 DO VDC 0,5 6Z2041-8UG12-0D1 6S BH00-0B0 6S L12 16 DO 24 VDC 2 6Z2041-8UG12-1D1 6S BH00-0B0 6S LB11 8 DO 24 VDC 2 6Z2041-8UG12-0D2 6S BF00-0B0 6S L11 16 DO 115/230 VC 1 6Z2041-8UG12-0D3 6S FF00-0B0 6S L11 16 DO 115/230 VC 1 6Z2041-8UG12-0D4 6S HF00-0B0 6S LB11 8 DO 115/230 VC 1,5 6Z2041-8UG12-1D3 6S FF00-0B0 6S LB11 8 DO 115/230 VC 1,5 6Z2041-8UG12-1D4 6S HF00-0B0 6S L12 16 DO Rel. UC 30V 0,5 6Z2041-8UG12-2D4 6S HF00-0B0 6S LB11 8 DO Rel.C250V 5 6Z2041-8UG12-3D4 6S HF00-0B0 6S LC11 16 DO Rel.C250V 5 6Z2041-8UG12-4D4 6S HF00-0B0 6S L13 8 I voltage metering / PT100 / 2- wire-transducer 6Z2041-8UG S KF00-0B0 6S L13 8 I voltage metering / PT100 / 2- wire-transducer 6Z2041-8UG S NF10-0B0 6S L13 8 I current metering 6Z2041-8UG S KF00-0B0 6S L13 8 I current metering 6Z2041-8UG S NF10-0B0 6S L13 8 I current metering / 4-wiretransducer 6Z2041-8UG S KF00-0B0 6S L13 8 I current metering / 4-wiretransducer 6Z2041-8UG S NF10-0B0 6S L13 16 I voltage metering 6Z2041-8UG S KF00-0B0 6S L13 16 I voltage metering 6Z2041-8UG S NF10-0B0 6S L13 16 I current metering / 2-wiretransducer 6Z2041-8UG S KF00-0B0 6S L13 16 I current metering / 2-wiretransducer 6Z2041-8UG S NF10-0B0 6S L13 16 I current metering / 4-wiretransducer 6Z2041-8UG S KF00-0B0 6S L13 16 I current metering / 4-wiretransducer 6Z2041-8UG S NF10-0B0
22 S5_115U --> S7_1500 S5 module I/O Voltage Current dapter S7 module 6S L13 8 O Current - / voltage metering 6Z2041-8UG S HD00-0B0 6S LB13 8 O Current - / voltage metering 6Z2041-8UG S HD00-0B0 6S LC13 8 O Current - / voltage metering 6Z2041-8UG S HD00-0B0 6S L13 8 O Current - / voltage metering 6Z2041-8UG S HF00-0B0 6S LB13 8 O Current - / voltage metering 6Z2041-8UG S HF00-0B0 6S LC13 8 O Current - / voltage metering 6Z2041-8UG S HF00-0B0 6S L13 8 I voltage metering / PT100 6Z2041-8UG S KF00-0B0 6S L13 8 I voltage metering / PT100 6Z2041-8UG S NF10-0B0 6Z2041-8UG02-0DU1 6Z2041-8UG02-0DU0 6Z2041-8UG00-0BG0 terminal adapter open ended mounting angle (2 pieces) switched on 2 S7-modules observe technical data of S7-module
23 S5_115U --> S7_1500 T MP S5 module I/O Voltage Current dapter S7 module 6S7482-7L11 16DI/16DO 24 VDC 6Z2041-8UG S7523-1BL Z2041-8UG02-0DU1 6Z2041-8UG02-0DU0 6Z2041-8UG00-0BG0 terminal adapter open ended mounting angle (2 pieces) switched on 2 S7-modules observe technical data of S7-module
Interface Module Adapter
utomation & Drives Interface Module dapter for SIMTIC S7 Interface Module dapter 6Z2 for SIMTIC S7-300 und SIMTIC S7-400 Short Description March 2007 Innovation on economical base When we are talking to
Temperature & Humidity SMS Alert Controller
Smart Energy Control... Temperature & Humidity SMS Alert Controller Energy Saving, Environment & Proper es Protec on 2 temperature sensors or 1 x temperature & 1 x humidity sensor Keep track of temperature
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
Safety Relays ESM/ESM-F
Safety Relays ESM/ESM-F More than safety. Safety More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian specialists in
How To Get the Most Out of Your ERP System:
How To Get the Most Out of Your ERP System: Cost Savings and Process Improvement Through Electronic Catalogs In This Paper * ERP Business Challenges * ERP System Limita ons * SaaS Requisi on Solu ons Gateway
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+ The digital I/O option port in the 4-Series provides us with 4 optically isolated inputs and 4 optically isolated outputs. All power is supplied externally.
GAE953 Electrical Alarm Unit 19" with Indicator
Master Instruction 08.95 MI EIO2211 A-(en) GAE953 Electrical Alarm Unit 19" with Indicator The electrical alarm unit GAE953 gives a signal when one or two set alarm values have been exceeded. Input signals
Preset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
DMX2PWM 9 Channel Dimmer Setup Manual
DMX2PWM 9 Channel Dimmer Setup Manual www.ecue.de DMX2PWM 9ch Dimmer - Setup Manual e:cue control GmbH An OSRAM Company Rev. 1.3_01/2010 DMX2PWM 9ch Dimmer - Setup Manual Table of Contents 1. Device Overview....................................4
SYSTEM 45. C R H Electronics Design
SYSTEM 45 C R H Electronics Design SYSTEM 45 All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, & A outputs. Independent 25
SYSTEM 4C. C R H Electronics Design
SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25
Investment Evalua on Summary (IES)
Investment Evalua on Summary (IES) Project Details: Project Name: Upgrade Fuses/Sec onaliser to Recloser Project ID: 00727 Thread: CAPEX/OPEX: Service Classifica on: Scope Type: Work Category Code: Work
mecotron Safety relay ESTOP-2 For emergency stop monitoring
E0006 000824 Safety relay E-2 For emergency stop monitoring Description The safety module E-2 for emergency stop monitoring is used for safety breaking one or more circuits and is designed to be incorporated
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply
INSTALLATION & SERVICE MANUAL. Display Panel
INSTALLATION & SERVICE MANUAL Display Panel The PowerLine EMS TM is a specialized power distribution and energy management system intended to be used in recreational vehicles. The Control Module is housed
PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624
PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 v.1.0 AC/AC power supply unit Edition: 1 from 24 th October 2008 Supercedes edition: ---------- 10062009 CONTENTS: 1. Technical description. 1.1. General description
Inductive Proximity Sensors
M12 Inductive Proximity Sensors Standard Length Mini's Extended Sensing 3 Wire DC 2 Wire DC 2 Wire AC (Wiring Schematic) 3 Wire DC PNP Normally Open (1) IMM32122C IMM35124C IMN32122C IMN35124C IMN32122M12
RS - SPM. Serial parallel translator module
ReSatron GmbH Boisheimer Str. 162 D-41751 Viersen Telefon (+49) 02162-45 06 80 Telefax (+49) 02162-45 03 04 email: info@resatron.de RS - SPM Serial parallel translator module RSSPM000215SPM-021 - Subject
Modular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
Data sheet GIOD.1 Input/output module with CAN bus. ERP no.: 5204183. www.guentner.de. Data sheet GIOD.1 V_3.0
Data sheet GIOD.1 Input/output module with CAN bus ERP no.: 5204183 www.guentner.de Page 2 / 10 Contents 1 GIOD.1... 3 1.1 Functional description...3 1.2 Connections... 5 1.3 Electrical properties of...
PHOENIX CONTACT - 2012-12-14. Features
Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
FUEL-16, Troubleshooting Fuel Supply Problems
FUEL-16, Troubleshooting Fuel Supply Problems Introduction This procedure is used to troubleshooting fuel supply problems including failure of the fuel pump to start during engine cranking. Fuel Pump Not
DCS Input/Output Relay Card Series
Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test
Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out
SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0
Disaster Recovery for MESSAGEmanager
Disaster Recovery for MESSAGEmanager The consequences of having your communica on systems disrupted, even for a short period of me can have a significant impact on your business. If your Fax Server is
ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01
ABB Drives User s Manual Pulse Encoder Interface Module RTAC-0 Pulse Encoder Interface Module RTAC-0 User s Manual 3AFE 64486853 REV A EN EFFECTIVE:.5.00 00 ABB Oy. All Rights Reserved. Safety instructions
SIMATIC. ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0) Preface. Properties 1. Diagnostics 2.
SIMATIC ET 200S distributed I/O SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0) Manual 04/2007 A5E01077385-01 Safety Guidelines
Quick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB.
7I29 MANUAL Rev 1.5 CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB. THE 7I29 IS INTENDED FOR USE BY OEMS THAT WILL INTEGRATE IT INTO A SYSTEM WITH INTERLOCKS AND
Understanding Credit Cards
2.6.3.F1 Understanding Credit Cards Advanced Level Credit cards are a form of open end credit. A credit card is a plas c card that you can use to access a line of credit that has been established in advance.
Thyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
S-series Mass Connection Solutions
DeltaV Distributed Control System Product Data Sheet March 2015 S-series Mass Connection Solutions Fast, easy and error-free cabinet wiring Modular design, improves reliability Lowers overall termination
PNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
IO-RM3 3-Stage Relay Module
Page 1 of 6 IO-RM3 3-Stage Relay Module Features: Benefits: Link selectable modes binary, heat/cool, staged or sequenced On/Off/Auto links for ease of commissioning DIN Rail mounting Fault finding LED
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Copyrights 2010 Victron Energy B.V. All Rights Reserved
Manual EN 1 Copyrights 2010 Victron Energy B.V. All Rights Reserved This publication or parts thereof may not be reproduced in any form, by any method, for any purpose. For conditions of use and permission
Understanding Credit Cards
Understanding Credit Cards Advanced Level Credit cards are a form of open end credit. A credit card is a plas c card that you can use to access a line of credit that has been established in advance. When
Mini Effect Gizmo. User s Manual. RJM Music Technology, Inc.
Mini Effect Gizmo User s Manual RJM Music Technology, Inc. Mini Effect Gizmo User s Manual Version 1.3 September 26, 2013 RJM Music Technology, Inc. 2525 Pioneer Ave #1 Vista, CA 92081 E-mail: support@rjmmusic.com
Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
ENCODER TEST MODULE APPLICATION GUIDE
ENCODER TEST MODULE APPLICATION GUIDE MODEL NUMBER: EM-DR1-ET-5-TB-4469-24V PART NUMBER: 924-60002-001 7230 Hollister Avenue, Goleta, CA 93117-2891 Phone: (800)362-6337 or (800)938-0782 Fax: (800)960-2726
Ordering Part Numbers: Universal Signal Converter: USC-CVB225-01 Universal Signal Converter with a 4-20mA input and +/- 10V output: USC-CVB225-B10V
Description: The universal signal converter offers threeway isolation and translates one input control signal into one to three simultaneous outputs. Switches allow the user to select the desired input
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
TECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER
TECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER (PWM Input, 1.2A or 2A Output, Metal Box or PCB) PCB Board - P/N: PWMC-PCB-2A, PWMC-PCB-1.2A Packaged Driver (metal box with 1.5 m (5 ft.) cable)
Application/Connection Examples
This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-305 DIN rail mounted single / 3 phase power & energy meter with RS-485 or TCP communications.
JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
NC-12 Modbus Application
NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1
Contact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts
SMB Series. Effective Customer Relationship Management Software for Small to Medium-sized Businesses
SMB Series Effective Customer Relationship Management Software for Small to Medium-sized Businesses Effec ve CRM solu ons for small to medium sized businesses Execu ve Summary An effec ve CRM solu on for
P3500. Quick Start Guide
P3500 Quick Start Guide Contents 1. Connec vity... 3 A. Front View... 3 B. Rear View... 3 2. Func ons and Controls... 4 3. Se ng up the P3500... 5 4. P3500 Displays... 6 A. Main Screen layout... 6 B. Mee
MOTION COORDINATOR MC206X Quick Connection Guide
I/O Connector 1 Analogue In / Inputs 0-7 5 Way Connector Power /CANbus I/O Connector 2 24V Power / I/O 8-15 I/O Connector 3 WDOG / Ref Encoder / Analogue Outputs USB Serial A Serial B Axes 0-3 Encoder
Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
ABB Drives. User s Manual HTL Encoder Interface FEN-31
ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
Features, Benefits, and Operation
Features, Benefits, and Operation 2014 Decibel Eleven Contents Introduction... 2 Features... 2 Rear Panel... 3 Connections... 3 Power... 3 MIDI... 3 Pedal Loops... 4 Example Connection Diagrams... 5,6
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
E-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 0, RS 8 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 0A types LED indication Clip-on IP 20 protection
Contact expander modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact expansion module for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs:
How to use the OMEGALOG software with the OM-SQ2010/SQ2020/SQ2040 Data Loggers.
How to use the OMEGALOG software with the OM-SQ2010/SQ2020/SQ2040 Data Loggers. OMEGALOG Help Page 2 Connecting Your Data Logger Page 2 Logger Set-up Page 3 Download Data Page 8 Export Data Page 11 Downloading
Single Port Gigabit Ethernet Media Converter Board (P/N 201350-xxx) User s Manual And Troubleshooting Guide
Single Port Gigabit Ethernet Media Converter Board (P/N 201350-xxx) User s Manual And Troubleshooting Guide August 12, 2009 Rev C Moog Components Group Springfield Operations 750 West Sproul Road Springfield,
Automation Unit TM 1703 ACP Flexible automation and telecontrol
Automation Unit Flexible automation and telecontrol Power Transmission and Distribution Outstanding performance: Automate simply with Highly complex and yet fully transparent automation solutions are not
12V Dimmable Driver EL-TMDRVR
Elemental LED, LLC website: elementalled.com 11 9 5 P a r k A v e., S u i t e 2 11 Emeryville, CA 94608 toll free 877.564.5051 fax 510.740.4457 12V Dimmable Driver EL-TMDRVR ETL Listed #4001928 CSA Listed
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
Dear Customer! Thank you for choosing our product.
Dear Customer! Edition 1.4 Thank you for choosing our product. MIDI AMP CONTROLLER MAC-4.4 is an adaptor that enables to control (switch the channels, switch on/off other functions) the amps equipped with
Blue Point Engineering
lue Point Engineering 10-Ch udio Controller Description: This board is designed to control the sequence or random playback by remote user switch or relay contact of 1 to 10 channels of audio files that
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
BG or BGE Brake Rectifier
Brake Voltage Supplied from the otor There are specific instances when the brake voltage can be tapped from the motor's terminal block. The advantage of brake systems wi in this way is when power is applied
SIRCOVER. Manual changeover switches from 125 to 3200 A. Changeover switches. Function. Advantages. The solution for.
The solution for Changeover switches svr_099_b_1_cat > Manufacturing industry. > Power distribution. 3200 Strong points svr_059_a_1_cat > complete range. > Easy connections. > Stable positions. > mproved
CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)
TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output
3 3RG78 45 program overview
Overview RG78 45 light curtains and arrays with integrated processing unit for type 4 in accordance with IEC/EN 61496 With "Standard" function package Resolutions: 14, 0, 50, and 90 Protective zone height:
ZC-24DO CANopen I/O Module: 24 Digital Outputs
Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches
www.curtisinstruments.com
CANBUS I/O EXPANSION MODULE MODELS 56 / 56P FEATURES Eighteen multi-purpose I/O pins provide simple, flexible vehicle control system expansion. Two high-frequency (A, A) PWM driver outputs support a variety
EZmoto V2. Product description Rev. 6 10/01/2014. EZmoto V2 Product description Rev.6 10/01/2014
EZmoto V2 Product description Rev. 6 10/01/2014 1 Contents 1. Overview... 3 2. Hardware Interface Description... 3 2.1 Main features of the EZmoto... 3 2.2 Hardware block diagram... 4 2.3 Internal Hardware
Color Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
PCAN-ISA. CAN Interface for ISA. User Manual
PCAN-ISA CAN Interface for ISA User Manual Products taken into account Product Name Model Item Number PCAN-ISA Single Channel One CAN channel IPEH-002074 PCAN-ISA Dual Channel Two CAN channels IPEH-002075
TECHNICAL DATASHEET Incremental Encoder RI 80-E
Incremental 30-45 hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range DC 5-30 V Isolated shaft NUMBER OF PULSES 1024 / 2048 / 2500 / 4096 / 5000 / 10000
EGSTON Standard E2xFxWx 12W
General description The family of switchmode power supplies offers an unmatched degree of flexibility and performance fulfilling even the most stringent requirements. Highly flexible electrical configuration
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
is then retained absolutely without interruption.
Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
400-800. Series OMEGA WATTS POWER SUPPLY AC/DC SINGLE OR MULTIPLE OUTPUT. Flexible modular design. Programmable outputs** Power factor correction***
INPUT Input protection Thermal protection Switching frequency internal fuse standard 100KHz Input with PFC : (MML400PFC, MML600, MML800) Input voltage range 85*-264VAC Inrush current (peak) MML400PFC
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
instabus KNX / EIB System System E F G H
Product name: Uninterruptible power supply (USV) 640 ma Design: REG (rail-mounted device) Article-no.: 1079 00 ETS search path: Gira Giersiepen / system components / power supply / power supply 640mA DRA
E-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
Switch Actuator, 8-fold, 10 A, MDRC AT/S 8.10.1, GH Q631 0075 R0111
, GH Q631 0075 R0111 The 8-fold switch actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus terminal. In the event of bus voltage failure,
IO-DIM6 6-Channel, Digital to Analogue Converters
Page 1 of 6 IO-DIM6 6-Channel, Digital to Analogue Converters Features: Benefits: Input status indication Calibrated output DIN Rail mounting Expands controller input capacity Fault finding LED indication
Fieldbus slave modules with I/Os, DIO
140 Fieldbus slave modules with I/Os, DIO 1534CF00 1534CH00 1534PF00 1534PH00 1536CH00 1536CL10 1536PH00 1536PL00 Order number 1534CF00 1534CH00 1534PF00 1534PH00 Figure Type SM 153, CANopen slave, DIO
Product and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
VOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421
VOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421 TABLE OF CONTENTS 1. FEATURES... 1 2. SPECIFICATIONS... 1 2-1 General Specifications...1 2-2 Electrical Specifications... 2 3. FRONT PANEL DESCRIPTION... 4 3-1
6ES7313-5BF03-0AB0. Supply voltages Rated value 24 V DC Yes permissible range, upper limit (DC) circuit breaker type B, min. 4 A
6ES7313-5BF03-0AB0 Page 1 Product data sheet 6ES7313-5BF03-0AB0 SIMATIC S7-300, CPU 313C, COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO 1 PT100, 3 FAST COUNTERS (30 KHZ), INTEGRATED 24V DC POWER SUPPLY,
F(t) Forssell Technologies Inc
F(t) Forssell Technologies Inc SMP-2Aa Microphone Preamplifier User Manual Forssell Technologies Inc Sandpoint Idaho USA (208) 263-0286 Introduction The Forssell Technologies Inc SMP-2A is a 2 channel,
Installation guide H-5500-8554-03-A. HSI hardwired system interface
Installation guide H-5500-8554-03-A HSI hardwired system interface 2008-2011 Renishaw plc. All rights reserved. This document may not be copied or reproduced in whole or in part, or transferred to any
Backup Management Solu ons The features of Backup Solu ons From Oversee My IT Oversee My IT - Ease of Use The Oversee My IT online backup service contains many powerful yet simple to use features. Using
OPL BASIC. Dosing System for Professional Laundry machines. Contents
OPL BASIC Dosing System for Professional Laundry machines Contents 1 Getting Started. Page 2 2 Installation. Page 4 3 Set Up & Operation. Page 8 4 Maintenance & Accessories. Page 10 5 Troubleshooting Page