Electrical Specifications. Max Working Voltage (V) Max Overload Voltage (V) Mechanical Specifications

Transcription

1 Features: Voltage ratings 2 times or more compared to standard chip resistors Values up to 100MΩ Lower resistance values may be available - contact Stackpole Proportionally higher pulse power capability RoHS compliant and halogen free Power Rating 70ºC 0.25 Max Working Voltage (V) Electrical Specifications Max Overload Voltage (V) Working Voltage = (P*R) or maximum working voltage listed above, whichever is lower. Overload Voltage = 2.5* (P*R) or maximum overload voltage listed above, whichever is lower TCR (ppm/ºc) Ohmic Range (Ω) and Tolerance 1% 5% 39K - 1M 56K - 1M 100K - 1M 100K - 1M 51K- 1M ± M - 20M 1.1M - 20M 30K - 1M ± M - 20M 1.1M - 20M Mechanical Specifications Weight (g) (1000 pc) L W H a b Body Length Body Width Body Height Top Termination Bottom Termination ± ± ± ± ± inches 1.00 ± ± ± ± ± 0.10 mm ± ± ± ± ± inches 1.60 ± ± ± ± ± 0.20 mm ± ± ± ± ± inches 2.00 ± ± ± ± ± 0.20 mm ± ± ± ± ± inches 3.10 ± ± ± ± ± 0.20 mm Rev Date: 01/23/

2 Percent Rated Power (%) Weight (g) (1000 pc) Mechanical Specifications (cont.) L W H a b Body Length Body Width Body Height Top Termination Bottom Termination ± ± ± ± ± inches 5.00 ± ± ± ± ± 0.20 mm ± ± ± ± ± inches 6.35 ± ± ± ± ± 0.20 mm Test Temperature Coefficient of Resistance (TCR) Short Time Overload Power Derating Curve: Test Method JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC JIS-C IEC Performance Characteristics Test Specification ± 1% ± 5% As specified by Electrical Specification Table ±(1% Ω) ±(2% Ω) Endurance ±(2% Ω) ±(3% + 0.1Ω) Damp Heat with Load Bending Strength ±(1% Ω) ±(1% Ω) Resistance to Soldering Heat Voltage Proof Leaching Rapid Change of ±(2% Ω) ±(3% + 0.1Ω) Dry Heat ±(1% Ω) ±(1.5% + 0.1Ω) No breakdown or flashover Individual leaching area 5% Total leaching area 10% Temperature RCWV (Rated continuous working voltage) = (P*R) or Max. Operating Voltage whichever is lower. Storage temperature: 25 ± 3 C; humidity < 80% RH Operating temperature range is -55 C to 155 C Test Method -55 C ~ +125 C, 25 C is the reference temperature RCWV * 2.5 or Max. Overload Voltage whichever is lower for 5 seconds Insulation Resistance 10G Max. Overload voltage for 1 minute 70 ± 2 C, RCWV for 1000 hours with 1.5 hour "ON" and 0.5 hour "OFF" 40 ± 2 C, 90 ~ 95% R.H., RCWV for 1000 hours with 1.5 hour "ON" and 0.5 hour "OFF" at +155 C for 1000 hours Bending once for 5 seconds 2010, 2512 sizes: 2 mm; other sizes: 3 mm Solderability 95% min. coverage 245 ± 5 C for 3 seconds ±(0.5% Ω) ±(1% Ω) 260 ± 5 C for 10 seconds 0402: 150V for 1 minute 0603: 300V for 1 minute 0805, 1206, 2010, 2512: 500V for 1 minute 260 ± 5 C for 30 seconds ±(0.5% Ω) ±(1% Ω) -55 C to +155 C, 5 cycles ºC 70ºC ºC Ambient Temperature (ºC) Rev Date: 01/23/

3 Recommended Pad Layout a b c inches mm inches mm inches mm inches mm inches mm inches mm Soldering Conditions (1) Time of IR reflow soldering at maximum temperature point 260 C : 10 seconds (2) Time of wave soldering at maximum temperature point 260 C : 10 seconds (3) Time of soldering iron at maximum temperature point 410 C : 5 seconds Rev Date: 01/23/

4 Reel Specifications,,, Tape Width (mm) 12 mm Reel Diameter (inches) 8 mm 7" 7" A B C W T ± ± ± ± ± inches ± ± ± ± ± 0.50 mm ± ± ± ± ± inches ± ± ± ± ± 0.50 mm Paper Tape Specifications A B W E F ± ± ± ± ± inches 0.65 ± ± ± ± ± 0.05 mm ± ± ± ± ± inches 1.10 ± ± ± ± ± 0.05 mm ± ± ± ± ± inches 1.60 ± ± ± ± ± 0.05 mm ± ± ± ± ± inches 1.90 ± ± ± ± ± 0.05 mm P0 P1 P2 D T ± ± ± ± ± inches 4.00 ± ± ± ± ± 0.10 mm ± ± ± ± ± inches 4.00 ± ± ± ± ± 0.10 mm ± ± ± ± ± inches 4.00 ± ± ± ± ± 0.10 mm ± ± ± ± ± inches 4.00 ± ± ± ± ± 0.10 mm Rev Date: 01/23/

5 Embossed Plastic Tape Specifications A B W E ± ± ± ± ± inches 2.80 ± ± ± ± ± 0.05 mm ± ± ± ± ± inches 3.50 ± ± ± ± ± 0.05 mm P0 P1 P2 D T ± ± ± ± inches 4.00 ± ± ± ± mm ± ± ± ± inches 4.00 ± ± ± ± mm F RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union s directive regarding Restrictions on Hazardous Substances (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances. Standard Product Series Description Medium Voltage Thick Film RVC Surface Mount Chip Resistor Note (1): RoHS Compliant by means of exemption 7c-I. RoHS Compliance Status Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) SMD YES(1) 100% Matte Sn over Ni Jan-03 03/01 Conflict Metals Commitment We at are joined with our industry in opposing the use of metals mined in the conflict region of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Rev Date: 01/23/

6 Compliance to REACH We certify that all passive components supplied by are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, The Registration, Evaluation, Authorization and Restriction of Chemicals, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order R V C J T 1 0 M 0 Product Series Size Tolerance Packaging Resistance Value RVC Medium Voltage Code W Code Tol Value Code Description Size Quantity Four characters with the F 1% E96, E multiplier used as the 7" Reel - Paper Tape J 5% E24 T 0603, 0805, decimal holder " Reel - Plastic Tape 2010, ohm = 10R Kohm = 10K Mohm = 1M Mohm = 100M Rev Date: 01/23/