Rev9 TOPCON Global Marketing Group
|
|
- Bathsheba Sparks
- 7 years ago
- Views:
Transcription
1 Quick Start Guide Rev9 TOPCON Global Marketing Group 1/18
2 The flow of Data Processing 1-1 Create a new project Obtain data by remote-controlling the GLS-1000 Obtain data by standalone 2-A-1 Connect PC with GLS A-2 Set an OCC point 2-A-3 Set scanning area by video image 2-A-4 Start scanning 2-A-5 Target scan Input the data into ScanMaster 2-B-1 Input the data Post processing 3-1 Data cleaning 3-2 Data registration 3-3 Data output 2/18
3 How to Scan Objects 1. Preparation 1-1 Create a New Project Create a new project. Choose File New Select where to save, name the project and press Save This is the screen you work on. (2) (1) (4) (3) 1) Project Explorer Tree view 2) View Window Multiple views, user configured 3) Task Window, View management, Layer management 4) Object properties view, Device view 3/18
4 2. Data Acquisition 2-A Acquire data through Scan Master 2-A-1 Connect PC with GLS-1000 * The PC and GLS-1000 need to be connected beforehand The Device Connection window will appear by pressing the button at the lower left of the window Enter the same IP address as the GLS-1000 and press OK After a time, (Disconnected) will become (Connected). You are ready to Get Laser Scanning! 4/18
5 2-A-2 Set an Occupied Point Click the Scan Positions with the right button of a mouse on the (1) window and choose Create Scan Position The occupied point, Scan Position 01 will be created. This Scan Position 01 is the scan position where the scanner is placed You can scan several from the same scan position. Create the place where you save the first scan. Click the Scans under the Scan Position 01 with the right button and choose Create Scan. The following window will appear 5/18
6 The Capture Scan and Images Window You can name and save the setting you specify below Set a scan area. When button is pushed respectively in on the left and lower right within the range of the scanning on the video image, the angle value is input. Manually enter the angles of upper left and lower right or after pressing button, click the Ctrl-left button on the point you want to scan on the (2) window (automatic numeric entry) Set density. Enter the approx. distance to the object. The distance will automatically be given by pressing button. When aiming by shuttle and pressing button, it measuring distance, then distance is input. Select your main scan distance. The internal adjustment will be done to minimize the beam spot within that range. The estimated time will be shown. Start button Choose either Angle or Distance or Points to set the density. In this situation, the distance means the interval at the above distance. 6/18
7 2-A-3 Set scanning area by video image When the video image is turned on, the image of the area at which the scanner is aiming is displayed. If you click on the video image, the scanner moves to the direction of the clicked center. Specify the upper left and lower right of the scan area, but it should be a little bigger than the object. 2-A-4 Start Scanning Measure the distance to the object by pushing the probe button to find the best zoom position. Set observation density, select "Scan and Images", and then if you push the start button, scanning will start. The photographs of the scanning area are taken first, and the scan follows. The scan data will be shown in real-time. The progress can be seen on the Tasks view screen. 7/18
8 This is how it looks when it completes scanning. This is the Sphere mode. The Cube mode will give you a different look. This is the example of the Cube mode. The 3D model can be seen from various angles. Cleaning and registration is done in this mode. The picture cannot be shown in the cube mode. Instead, the RGB data can be mapped on each point data to show the model in colors. Click the Scan 001 with the right button and choose the Color from Image to map the RGB data. Change the Data Color from Intensity to Image to show the photo-realistic pointcloud. 8/18
9 2-A-5 Target Scan Target scans are necessary to match the coordinate systems of the different occupations that you made to perform Registration of your scan data. ScanMaster uses the following registration methods. (a) OCC/BCC: This method decides the coordinate system by setting up the OCC and the BCC on the known points, just like the TS. (b) Tie Point : This method decides the coordinate system by setting up more than three tie points on each combining area and giving them the coordinates. Both methods employ the same method for scanning targets. Aim the center of the target using video image. The target scan setting screen opens when you select Create - Target Scan in the menu. The target scanning begins when pushed. button is The current status of the target scan can be checked closely by switching the screen display to the Target Scan mode. The target scan is repeated for every target you wish to use for registration. 9/18
10 * Note for Target Scans - For the OCC/BCC method, you must measure the scanner height and the target height. More importantly, the coordinates of the reference points are necessary. - For the Tie Point method, it is necessary to measure coordinates of the target with TS etc. unless you use arbitrary coordinates. -Field notes are recommended, write down the measured height to be able to confirm the value later. Register the target scans as the tie points. Right-click the Target Scan in the project tree and select "Create Tie Point". The tie point is added to the tie point tree. is plotted on the screen at the same time as a tie point. 10/18
11 For the OCC/BCC method, input the information of OCC/BCC. When the scanning position tree is clicked, the property is displayed on the object tab at the right of the screen. Input the information of OCC/BCC in this property. * After inputting the coordinates, the reference point names of OCC and BCC can be selected from the pull-down menu. BCC Reference Point BCC Tie Point Name BCC Target Height OCC Scanner Height OCC Reference Point Continue Scanning Follow the next steps to continue scanning Scan from a different occupation without moving the control points Click the Scans under the Scan position 01 with the right button and choose the Create Scan Replace the control point and scan After connecting the GLS-1000, click the Scan Positions with the right button and choose the Create Scan Position 11/18
12 3. Post-Processing 3-1 Clean the data Delete the unnecessary data to create 3D model Specify the data that you want to delete. There are 3 ways to specify the data. : Point specification * If you select the point, switch to : Area specification by rectangle CHANGE the data mode. : Area specification by polygon Delete key Set the delete area Select the delete data The result As for the key operation, please refer to the command shown at the lower left of the window Clean each scan one by one. Check or uncheck the Scan Position or Scan box to either display or hide data 12/18
13 3-2 Combine the data (Registration) Create a single pointcloud for the object Display two scan data together to make the work easier Choose Create - View to create View 01 tab in the Model view window. Display Scan Position 01 on Default tab and Scan Position 02 on View 01 tab Drag View 02 tab to the following location to show the two windows together Drag & Drop 13/18
14 This is how Scan position01 and Scan position02 are shown together on one screen Default tab View01 tab Scan position01 Scan position Input the reference point coordinates The point clouds acquired on site is the data of an optional coordinate system. It is necessary to match the coordinate systems to perform Registration. You need the reference points for this purpose. For the OCC/BCC method, input each reference point coordinates you used. For the tie point method, input the central coordinates of the targets. Select "File" - "Import" to take in the reference point coordinate file. The TXT and DXF are recognized as the input file formats. 14/18
15 3-2-3 Connect Tie Points(Tie Point Constraint) When combining the data by the tie point method, you need to bind three or more common tie points of the data next to each other. The same tie points on each data are linked and registered. Same Tie Point Same Tie Point Tie Point 0 Same Tie Point Tie Point 02 Choose Selection Mode Objects and click Point Selection Create Tie Point constraint 01 15/18
16 Click the first tie point. changes into yellow, which means it is selected. Next, hold the Shift key and choose the same tie point on the next window. of the same points on a right and left screens become yellow. Click this icon. The tie points are linked and the pair is registered as "Tie point constraint 01". This operation is repeated over the number of the combination of same tie points Registration for Tie Point Method (Tie Point Constraint) Choose Registration tab, hold the Shift key and select all the required models and press. When the selected models move to the right window, the registration is completed Registration for OCC/BCC You need to enter the information of OCC and BCC. When the scanning position tree is clicked, property is displayed on the object tab at the right of the screen. Input the information of OCC/BCC in this property. * After inputting the reference point coordinates, the reference point name of OCC and the BCC come to be able to select the pull-down. 16/18
17 BCC Reference Point BCC Tie Point Name BCC Target Height OCC Scanner Height OCC Reference Point Choose Registration tab. Hold the Shift key, select all the required models, check the OCC/BCC box and press button. When the selected models move to the right window, the registration is completed Check both the Scan Position 01 and 02 boxes to confirm how they are combined. The registered model will be displayed 17/18
18 3-3 Data Output Format Format Data Elements Fields Main Software CL3,CLR,IJ XYZ, RGB, Reflected Intensity General-purpose Topcon original Point Cloud ASCII XYZ, RGB, Reflected Intensity General-purpose Widely used for scan data passing PTS Leica ASCII General-purpose Leica Cyclone PTX Leica ASCII General-purpose Leica Cyclone DXF XYZ, Line, TIN, Primitive Shape CAD Autodesk AutoCAD DWG XYZ, Line, TIN, Primitive Shape CAD Autodesk AutoCAD DGN XYZ, Line, TIN, Primitive Shape CAD Bentley MicroStation PTC XYZ, Line, TIN, Primitive Shape CAD KUBIT (Add-on S/W for Auto CAD processing point cloud data at high speed) 18/18
1. Installing The Monitoring Software
SD7000 Digital Microphone Monitor Software manual Table of Contents 1. Installing The Monitor Software 1.1 Setting Up Receivers For Monitoring 1.2 Running The Application 1.3 Shutdown 2. The Detail Monitoring
More informationDigital Signatures with AutoCAD and CoSign
Digital Signatures with AutoCAD and CoSign 2 Contents Introduction... 2 Supported File Types... 3 Digitally Signing PDF Files or Drawings?... 3 Digitally Signing Drawing files with CoSign... 3 Configure
More informationRV 12 Electrical Schematic Instructions
RV 12 Electrical Schematic Instructions Step 1: Set your monitor resolution as high as possible. Step 2: Download "RV 12 Electrical Systems (XXX).dwg" from the Van's Aircraft web site to your desktop.
More informationHOW TO LINK AND PRESENT A 4D MODEL USING NAVISWORKS. Timo Hartmann t.hartmann@ctw.utwente.nl
Technical Paper #1 HOW TO LINK AND PRESENT A 4D MODEL USING NAVISWORKS Timo Hartmann t.hartmann@ctw.utwente.nl COPYRIGHT 2009 VISICO Center, University of Twente visico@utwente.nl How to link and present
More informationBentley MicroStation V8i
Bentley MicroStation V8i Bentley MicroStation V8i is a CAD program designed with the interoperability of software in mind. MicroStation is compatible with both DWG and DGN files, either preexisting or
More informationThe service note describes the basic steps to install a ip camera for the DVR670
Tech note Description Adding IP camera to DVR670 General The service note describes the basic steps to install a ip camera for the DVR670 Steps involved: 1) Configuration Manager application 2) Camera
More informationLegal Notes. Regarding Trademarks. 2011 KYOCERA MITA Corporation
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from
More informationFile Management Utility User Guide
File Management Utility User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held
More informationAutoCAD i 3D Samordningsmodell Tips og Triks for tegning i 3D med AutoCAD
AutoCAD i 3D Samordningsmodell Tips og Triks for tegning i 3D med AutoCAD Tesfaye Kebede Vianova systems AutoCAD 3D AutoCAD - 3D Samordningsmodell - Course Contents - New Features 3D AutoCAD 2013 - Sheet
More informationTREND series H.264 DVR Central Management System Quick User Guide
TREND series H.264 DVR Central Management System Quick User Guide Table of Contents 1. Introduction... 2 2. Install CMS/NVMS Software... 3 3. Create DVR Device... 9 3.1 Add DVR to CMS... 9 3.2 DVR Automatically
More informationGETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6
1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)
More informationLayouts, Plotting, Printing
Layouts, Plotting, Printing Sacramento City College Engineering Design Technology Layouts, Plotting, Printing 1 Objectives Print and plot a drawing. Set up layouts using title blocks and viewports. Create
More informationAutodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy
Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by
More informationScanner Networking. User s Guide. Microtek Scanner Server (MSS) utility. Note: ScanWizard Pro's scanner networking
Scanner Networking User s Guide This document explains how the scanner network function in ScanWizard Pro allows you to share and unshare scanners for public use, as well as how to access remote and local
More informationGetting Started With DraftSight A Guide For AEC Users
Getting Started With DraftSight A Guide For AEC Users DraftSight.com Facebook.com/DraftSight Welcome to DraftSight a valuable tool for any AEC professional! DraftSight is more than a free, professional-grade
More informationDocument Versions in ProjectWise
Document Versions in ProjectWise A useful feature of ProjectWise is version control of documents. A version is a read-only snapshot of a document. Maintaining the history of a document as edits are made
More informationCREATING AN IMAGE FROM AUTOCAD CADD NOTE 16. MENU: AutoCAD, File, Plot COMMAND: plot ICON:
CADD NOTE 16 This CADD Note provides instructions on creating an image from an AutoCAD drawing that can be pasted into another application (e.g., Word, Powerpoint, etc.). These instructions assume the
More informationE-Map Application CHAPTER. The E-Map Editor
CHAPTER 7 E-Map Application E-Map displays the monitoring area on an electronic map, by which the operator can easily locate the cameras, sensors and alarms triggered by motion or I/O devices. Topics discussed
More informationCreating Drawings in Pro/ENGINEER
6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing
More informationNVMS-1200. User Manual
NVMS-1200 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Install and Uninstall... 1 1.2.1 Install the Software... 1 2 Login Software... 3 2.1 Login... 3 2.2 Control Panel Instruction...
More informationAdobe Illustrator CS5 Part 1: Introduction to Illustrator
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 1: Introduction to Illustrator Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading
More informationTABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
More informationVersion 1.0 February 2013 702P01129. Simple Image Quality Adjustment Tool Installation and Adjustments Guide
Version 1.0 February 2013 702P01129 Simple Image Quality Adjustment Tool 2013 Xerox Corporation. All rights reserved. Xerox and Xerox and Design are trademarks of Xerox Corporation in the United States
More informationOPERATION MANUAL. MV-410RGB Layout Editor. Version 2.1- higher
OPERATION MANUAL MV-410RGB Layout Editor Version 2.1- higher Table of Contents 1. Setup... 1 1-1. Overview... 1 1-2. System Requirements... 1 1-3. Operation Flow... 1 1-4. Installing MV-410RGB Layout
More informationUsing Web Services for scanning on your network (Windows Vista SP2 or greater, Windows 7 and Windows 8)
Using Web Services for scanning on your network (Windows Vista SP2 or greater, Windows 7 and Windows 8) The Web Services protocol allows Windows Vista (SP2 or greater), Windows 7 and Windows 8 users to
More informationNVMS - 1000 USER MANUAL. Version 2.1.0
NVMS - 1000 USER MANUAL Version 2.1.0 Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall
More informationLegal Notes. Regarding Trademarks. 2012 KYOCERA Document Solutions Inc.
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from
More informationUse Windows Display Properties to activate multiple monitors. Here we use Windows XP to illustrate the steps of configuration.
11 Useful Utilities 11.15 Digital Matrix To create more screen space to display multiple channels, such as 32 channels, Digital Matrix is thus introduced to provide a way to view and manage up to 8 monitor
More informationEffective Collaboration
AUTODESK BUILDING SOLUTIONS Effective Collaboration Exporting Revit Architecture Models as ACIS Solids for Use in AutoCAD MEP The intent of this paper is to explain a process by which architects using
More informationGelAnalyzer 2010 User s manual. Contents
GelAnalyzer 2010 User s manual Contents 1. Starting GelAnalyzer... 2 2. The main window... 2 3. Create a new analysis... 2 4. The image window... 3 5. Lanes... 3 5.1 Detect lanes automatically... 3 5.2
More informationGUIDE TO POST-PROCESSING OF THE POINT CLOUD
GUIDE TO POST-PROCESSING OF THE POINT CLOUD Contents Contents 3 Reconstructing the point cloud with MeshLab 16 Reconstructing the point cloud with CloudCompare 2 Reconstructing the point cloud with MeshLab
More informationCollaborating Across Disciplines with Revit Architecture, MEP, and Structure
Collaborating Across Disciplines with Revit Architecture, MEP, and Structure David Cohn AB104-3 Are you ready to take the next step and use building information modeling to share data across the entire
More informationThere are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
More informationThe CAD interface is comprised of two different screens: the graphic/drawing screen and the text screen.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: jennifer@thatcadgirl.com Phone: (919) 417-8351 Fax: (919) 573-0351 Overview of AutoCAD or IntelliCAD with Carlson Software Screens and
More informationConverting an AutoCAD Drawing into PDF File
Tutorial Created by Brijesh Bhatha, 2004. Updated 2006 by Corinne Stewart (corinnestewart@gmail.com) CP-208 Plan Preparation Studio - Prof. Elizabeth Macdonald 2 In this tutorial we will learn to create
More informationChapter 23: Drafting in Worksheet View
Chapter 23: Drafting in Worksheet View Worksheet View is a powerful, 2D production drafting module. Here you can find all of the drawing and editing tools needed to create fast, accurate, detailed working
More informationCreating and Using Links and Bookmarks in PDF Documents
Creating and Using Links and Bookmarks in PDF Documents After making a document into a PDF, there may be times when you will need to make links or bookmarks within that PDF to aid navigation through the
More informationScanning. WorkCentre C2424 Copier-Printer
Scanning This chapter includes: "Basic Scanning" on page 4-2 "Installing the Scan Driver" on page 4-4 "Adjusting Scanning Options" on page 4-5 "Retrieving Images" on page 4-11 "Managing Files and Controlling
More informationGephi Tutorial Visualization
Gephi Tutorial Welcome to this Gephi tutorial. It will guide you to the basic and advanced visualization settings in Gephi. The selection and interaction with tools will also be introduced. Follow the
More informationMobile Device Management Platform Operation Manual V1.4 RECODA
Mobile Device Management Platform Operation Manual V1.4 Shenzhen Technologies Limited All rights reserved Contents 1. Overview... 4 2. Preparations for Installation... 5 3. Installation Guide... 6 3.1.
More informationAutoDWG DWGSee DWG Viewer. DWGSee User Guide
DWGSee User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee After you install
More informationACS CLIENT SOFTWARE USER MANUAL
ACS CLIENT SOFTWARE USER MANUAL 1 ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD WindowXP, Vista Pentium 4, 2Ghz 1024*768, 64MB 24bit color graphic card 1GB 20MB
More informationLinkage 3.2. User s Guide
Linkage 3.2 User s Guide David Rector Wednesday, April 06, 2016 Table of Contents Table of Contents... 2 Installation... 3 Running the Linkage Program... 3 Simple Mechanism Tutorial... 5 Mouse Operations...
More informationNETWORK PRINT MONITOR User Guide
NETWORK PRINT MONITOR User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable
More informationidisplay v.2.0 User Guide
idisplay v.2.0 User Guide 2013 i3 International Inc. The contents of this user manual are protected under copyright and computer program laws. www.i3international.com 1.866.840.0004 CANADA 780 Birchmount
More informationBanner Document Management Suite (BDMS) Web Access Help
May 10 th, 2011 Banner Document Management Suite (BDMS) Web Access Help Division of Information Technology AppXtender Web Access Help: For questions regarding AppXtender Web Access, please contact the
More informationYOU SEARCH WE FIND. QuickStartGuide. Inc.
YOU SEARCH WE FIND QuickStartGuide CDS is a lightweight software enabling you to instantly search any keyword in all your files, contacts, emails, and email attachments stored anywhere on your PC. Stop
More informationCreating Your Own 3D Models
14 Creating Your Own 3D Models DAZ 3D has an extensive growing library of 3D models, but there are times that you may not find what you want or you may just want to create your own model. In either case
More informationidvr-pro Viewer Software for Mac User Manual ver 0.1
idvr-pro Viewer Software for Mac User Manual ver 0.1 1 Contents 1. Introduction... Error! Bookmark not defined. 1.1 Summary... Error! Bookmark not defined. 2. Install... Error! Bookmark not defined. 2.1
More informationConfiguring a Macintosh Laptop to Use Multiple Displays
Configuring a Macintosh Laptop to Use Multiple Displays These instructions may be useful if you are connecting a Mac laptop to a secondary monitor or to a projector within the Ideal Learning Environment
More informationRemote Desktop Instructions for the Remote PC Running Windows Vista
USC Marshall School of Business Academic Information Services Remote Desktop Instructions for the Remote PC Running Windows Vista Remote Desktop allows you to access the files and programs on a computer
More informationSelf-Positioning Handheld 3D Scanner
Self-Positioning Handheld 3D Scanner Method Sheet: How to scan in Color and prep for Post Processing ZScan: Version 3.0 Last modified: 03/13/2009 POWERED BY Background theory The ZScanner 700CX was built
More informationSOEM 024: Computer Aided Design. E. Rozos
SOEM 024: Computer Aided Design E. Rozos 3D Design with AutoCAD 2002 Isometric Drawings 3D coordinates, views Wire-frame 3D modelling, extruding Primitive objects Boolean operators Terminology Boolean
More informationWindows 10: A Beginner s Guide
Windows 10: A Beginner s Guide Copyright 2014 Conceptual Kings. All are rights reserved. This book or any portion thereof may not be reproduced or used in any manner whatsoever without the express written
More informationFiles Used in this Tutorial
Generate Point Clouds Tutorial This tutorial shows how to generate point clouds from IKONOS satellite stereo imagery. You will view the point clouds in the ENVI LiDAR Viewer. The estimated time to complete
More informationGPS System 500. User Manual / Getting Started with SKI-Pro. Version 2.5 English
20 30 40 50 GPS System 500 User Manual / Getting Started with SKI-Pro Version 2.5 English SKI-Pro GPS Software Congratulations on your purchase of Leica Geosystems SKI-Pro Software. In order to use this
More informationDWGSee Professional User Guide
DWGSee Professional User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee
More informationTheoOffice Network adjustment for TheoLt project & GSI survey data
TheoOffice Network adjustment for TheoLt project & GSI survey data This page is left intentionally blank 2 TheoOffice manual r1.03_en.doc Last printed 21/07/2011 15:51:00 Copyright Latimer CAD Ltd 2010
More informationInstructions for Use. CyAn ADP. High-speed Analyzer. Summit 4.3. 0000050G June 2008. Beckman Coulter, Inc. 4300 N. Harbor Blvd. Fullerton, CA 92835
Instructions for Use CyAn ADP High-speed Analyzer Summit 4.3 0000050G June 2008 Beckman Coulter, Inc. 4300 N. Harbor Blvd. Fullerton, CA 92835 Overview Summit software is a Windows based application that
More informationViewing and Troubleshooting Perfmon Logs
CHAPTER 7 To view perfmon logs, you can download the logs or view them locally. This chapter contains information on the following topics: Viewing Perfmon Log Files, page 7-1 Working with Troubleshooting
More informationOS X LION SET UP THE SYSTEM
OS X LION SET UP THE SYSTEM OS X Lion Set Up the System Last Edited: 2012-07-10 1 Personalize the Interface... 3 Organize the Desktop... 3 Configure Apple Trackpad... 4 Configure Apple Magic Mouse... 6
More informationTable Of Contents. iii
Table Of Contents Quickstart... 1 Introduction... 1 Data administration... 1 The Toolbar... 2 Securities management... 3 Chart window structure... 4 Adding an indicator... 5 Chart drawings... 6 Saving
More informationSMS (Server Management Software) Digital Video Recorder. User s Manual
SMS (Server Management Software) Digital Video Recorder User s Manual Contents 1 - Introduction 2 1.1 About this manual 2 1.2 Configuration 2 1.3 SMS Functions 2 1.4 Product Information 2 1.5 System Requirements
More informationBefore You Begin Your Computer Must Meet the System Requirements to Access Cloud9
Before You Begin Your Computer Must Meet the System Requirements to Access Cloud9 If you are not working from a Windows 7 or 8 computer, you will need to update: Windows XP to Service Pack 3 Windows Vista
More informationSolar-Generation Data Visualization Software Festa Operation Manual
Solar-Generation Data Visualization Software Festa Operation Manual Please be advised that this operation manual is subject to change without notice. FL-003 CONTENTS INTRODUCTION Chapter1: Basic Operations
More informationWorking with SQL Server Integration Services
SQL Server Integration Services (SSIS) is a set of tools that let you transfer data to and from SQL Server 2005. In this lab, you ll work with the SQL Server Business Intelligence Development Studio to
More informationIn this note, you will learn the basic applications of McAfee VirusScan Enterprise (hereafter McAfee ). Six topics will be covered as below:
ANTIVIRUS SOFTWARE In this note, you will learn the basic applications of McAfee VirusScan Enterprise (hereafter McAfee ). Six topics will be covered as below: 1. Start McAfee VirusScan Enterprise 2. Change
More informationChapter 4 Control Center
Chapter 4 Control Center Control Center is a central monitoring station solution (CMS) that provides the CMS operator with these major features: Access to client DVRs (See Remote DVR) Access to remote
More informationSoftware: AutoCAD Civil 3D 2014, NRCS C3D 2014 template, ESRI ArcMap. Notation:Button to Press Displayed Text Icon Action {Text to Enter} Menu Item
Overview: Use the following processes for exchanging georeferenced data between AutoCAD Civil 3D 2014 and ArcMap. The work must be based in any real world coordinate system. (This example uses NAD 83 UTM
More informationHow To Use The Workstation Program On A Pc Or Mac Or Macbook Or Macintosh (Aero) With A Computer Or Ipa (A2) With An Ipa Or Ipad (A3) With The Powerpoint 2.
Mirasys NVR 6.1 User s Guide CONTENTS Contents... 2 Before you start... 3 Introduction... 6 Logging in... 9 User interface... 13 Navigator... 16 Cameras... 25 Video outputs... 41 Digital outputs... 46
More informationChapter 1 Downloading Images to Your Computer (Windows)
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
More informationMulti-Site 4200. Remote Viewing Software. User Guide
Multi-Site 4200 Remote Viewing Software User Guide Document 800-12064V1 Rev A 09/2012 User Guide Revisions Issue Date Revisions A 07/2012 New document. V1 Rev A 09/2012 Updated the description of the
More information10. THERM DRAWING TIPS
10. THERM DRAWING TIPS 10.1. Drawing Tips The THERM User's Manual describes in detail how to draw cross-sections in THERM. This section of the NFRC Simualation Training Manual presents some additional
More informationBasic Introduction. GMFX MetaTrader 4.0. Basic Introduction
GMFX GMFX About Got Money FX Got Money FX is an Australian owned and operated foreign exchange brokerage firm. We pride ourselves in offering our clients an honest and ethical trading environment. Clients
More informationPlotting: Customizing the Graph
Plotting: Customizing the Graph Data Plots: General Tips Making a Data Plot Active Within a graph layer, only one data plot can be active. A data plot must be set active before you can use the Data Selector
More informationHaving Fun with QNAP and your Home Automation
Having Fun with QNAP and your Home Automation The popularity of home automation has been increasing greatly in recent years due to much higher affordability and greater simplicity via smartphone and tablet
More informationGeneral Precautions The user must operate each product according to the performance specifications described in the operation manuals.
General Precautions The user must operate each product according to the performance specifications described in the operation manuals. Before using the product under conditions which are not described
More informationVMS A1 Client Software. User Manual (V2.0)
VMS A1 Client Software User Manual (V2.0) Contents Chapter 1 Overview...4 1.1 Description...4 1.2 Running Environment...4 1.3 Function Modules...5 Chapter 2 Live View...7 2.1 User Registration and Login...7
More informationSpike Tech Tip: How to use your online, cloud-based tools for Spike
Spike Tech Tip: How to use your online, cloud-based tools for Spike September 30, 2015 Tech Tip: How to use your online, cloud-based tools for Spike ikegps introduced a beta version of its cloud-based
More information1. Central Monitoring System Software
1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals
More informationOnline Visa Photo Upload Process
Online Visa Photo Upload Process 1. Filling Online Visa Application Form 1. For online Visa registration User enters the URL https://indianvisaonline.gov.in/, and then the following screen appears as shown
More informationACTi Streaming Explorer User s Manual Ver 2.1.09
ACTi Streaming Explorer User s Manual Ver 2.1.09 2011/06/24 Overview Streaming Explorer is a Web tool used to manage devices remotely. The Functions provided include Connection, PTZ, DI/DO, Motion, Camera
More informationNew Features in TerraScan. Arttu Soininen Software developer Terrasolid Ltd
New Features in TerraScan Arttu Soininen Software developer Terrasolid Ltd Version 013.xxx Computer ID changes in licenses Send new computer ID to Terrasolid if using: Server pool licenses (server ID and
More informationPOWER NETWORK. 800-02577-iPcams 2/10 Rev. A
POWER NETWORK Total Connect Online Help Guide for: ip Cameras ipcam-wi Camera ipcam-pt Pan and Tilt Camera 800-02577-iPcams 2/10 Rev. A POWER NETWORK ip Cameras Online Help Guide This guide covers the
More informationUnified Communications Using Microsoft Office Live Meeting 2007
Unified Communications Using Microsoft Office Live Meeting 2007 Text version of online course. Contents Unified Communications... 1 About Microsoft Office Live Meeting 2007... 3 Copyright Information...
More informationLeica Geosystems HDS. Welcome to CloudWorx 4.0 Tutorial. Cyclone CloudWorx 4.0 Pro Tutorial Section II High-Definition Surveying
Welcome to CloudWorx 4.0 Tutorial Leica Geosystems HDS Cyclone CloudWorx is the high-performance point cloud solution that enables you to load, render, analyze and extract information from high-definition
More informationSoftware version 1.1 Document version 1.0
Software version 1.1 Document version 1.0 1 RDNET PROTOCOL OVERVIEW... 2 1.1 Network description... 2 1.2 Connection topology... 2 2 SOFTWARE BASIC OPERATIONS... 3 2.1 Main View elements... 3 2.2 Scanning
More information6. If you want to enter specific formats, click the Format Tab to auto format the information that is entered into the field.
Adobe Acrobat Professional X Part 3 - Creating Fillable Forms Preparing the Form Create the form in Word, including underlines, images and any other text you would like showing on the form. Convert the
More informationXMEye Android Mobile Monitoring Client English Manual
XMEye Android Mobile Monitoring Client English Manual Written by: The test department Prepared Date: 2014-03-25 Version: V1.0 目 录 1. Introduction... 3 1.1. Brief Introduction... 3 1.2. Main Functions...
More informationTopographic Change Detection Using CloudCompare Version 1.0
Topographic Change Detection Using CloudCompare Version 1.0 Emily Kleber, Arizona State University Edwin Nissen, Colorado School of Mines J Ramón Arrowsmith, Arizona State University Introduction CloudCompare
More informationChanging Your Cameleon Server IP
1.1 Overview Technical Note Cameleon requires that you have a static IP address defined for the server PC the Cameleon server application runs on. Even if the server PC has a static IP address, you may
More informationA-PDF AutoCAD to PDF utility. User Documentation
Note: This product is distributed on a try-before-you-buy basis. All features described in this documentation are enabled. The registered version does not insert a watermark in your generated pdf documents.
More informationIDDERO HOME SERVER. Quick start guide. www.iddero.com 150302-02
IDDERO HOME SERVER Quick start guide www.iddero.com 150302-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 IDDERO CONFIGURATION SOFTWARE... 3 2.1 Installation and First Steps...3 3 IDDERO HOME SERVER CONFIGURATION...
More informationAssociation of Public Data Users Annual Conference September 21, 2011
Data Visualization in the NEW American FactFinder Association of Public Data Users Annual Conference September 21, 2011 After viewing this presentation, you will be able to: 1. Create a Reference Map 2.
More informationAdobe Acrobat: Creating Interactive Forms
Adobe Acrobat: Creating Interactive Forms This document provides information regarding creating interactive forms in Adobe Acrobat. Please note that creating forms requires the professional version (not
More informationAn introduction to 3D draughting & solid modelling using AutoCAD
An introduction to 3D draughting & solid modelling using AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA These notes are to be used in conjunction with the AutoCAD software
More informationUser Manual V1.0. Remote Software
User Manual V1.0 Notice: The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change
More informationThis ReadMe file describes the changes in the release of Multiframe 17.00 V8i.
Multiframe 17.00 V8i ReadMe 16 September 2013 This ReadMe file describes the changes in the release of Multiframe 17.00 V8i. System Requirements: 32-bit versions will run on Windows XP/Vista/7, and 64-bit
More informationConverting GIS Datasets into CAD Format
Ball State University Libraries GIS Research and Map Collection Converting GIS Datasets into CAD Format Author: Angela Gibson, 6/13/2014 Overview: One of the most common requests from students is for GIS
More informationMAGNET Field is a powerful and intuitive field
MAGNET Field is a powerful and intuitive field application software that enables users to collect survey mapping data and perform construction and road layout using total stations, levels, and GPS. MAGNET
More information