Technical Information

Transcription

1 Technical Information Windows 7 Firewall Settings Operation Guide (To correctly operate recorder related software) Yokogawa Electric Corporation , Nakacho, Musashino-shi, Tokyo, Japan 1st Edition Sept. 2010

2 Introduction This document describes use of the Windows 7 Windows firewall settings. Please read through this operation guide carefully before using the software. Note that Windows firewall settings are the responsibility of the user. i Notice The contents of this manual are subject to change without notice as a result of continuing improvements to the performance and functions. Every effort has been made to ensure accuracy in the preparation of this manual. Should any errors or omissions come to your attention, however, please inform Yokogawa Electric s sales office or sales representative. Under no circumstances may the contents of this manual, in part or in whole, be transcribed or copied without our permission. Trademarks Our product names or brand names mentioned in this manual are the trademarks or registered trademarks of Yokogawa Electric Corporation (hereinafter referred to as YOKOGAWA). Microsoft, MS-DOS, Windows, Windows XP, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Adobe, Acrobat, and Postscript are either registered trademarks or trademarks of Adobe Systems Incorporated. We do not use the TM or mark to indicate these trademarks or registered trademarks in this manual. All other product names mentioned in this manual are trademarks or registered trademarks of their respective companies. Scope of the Manual This manual does not explain the basic operations of the Windows 7 (operating systems). For information regarding the basic operations of Windows, see the user s guide that came with Windows. 1st Edition : Sept (KP) All Rights Reserved Copyright 2010, Yokogawa Electric Corporation

3 Windows 7 Firewall Settings Operation Guide (To correctly operate recorder related software) CONTENTS Toc-1 Introduction...i 1. Effects of the Windows Firewall Settings for the Windows Firewall Appendix. 2.1 Select the Windows Firewall Check the Windows Firewall Status Allow a Program Through Windows Firewall Programs that can be granted permission... App-1 Revision Information...i

4 1. Effects of the Windows Firewall Effects of the Windows Firewall The Windows firewall is software that checks information (communication) sent from the internet or network, and either blocks or allows that information to pass to a computer. DAQWORX and recorder related software have programs that perform communications that can be interfered with by the Windows firewall. If a program fails to run due to the Windows firewall, you can either disable the firewall or refer to this document to specify to "Allow a Program Through Windows Firewall." PC Firewall Internet/Network Confirm befor setting to Windows firewall If DAQWORX and recorder related software do not work, it may not be only due to the Windows firewall. Check the following before attempting to configure a Windows firewall. Check the internet connection status using the ping command. If the ping fails, check the cables, hub, IP address settings, and other factors to determine the cause. Check that procedures performed on the software are correct. If the problem cannot be solved after taking the above measures, it is likely that there will be problems with the firewall settings.

5 2. Settings for the Windows Firewall Settings for the Windows Firewall 2.1 Select the Windows Firewall 1. Click the Control Panel on the Windows Start menu. The Control panel appears. 2. Click the System and Security. When using the Classic display, use the procedure below. 3. Click the Windows Firewall. The Windows Firewall Settings dialog box is displayed.

6 2. Settings for the Windows Firewall Check the Windows Firewall Status 1. Click the Advanced settings. 2. Click the Windows Firewall Properties. 3. Click the tab of the profile appropriate for your operating environment. When the Firewall state is Off, click Cancel to exit. When the Firewall state is On, and Inbound connections or Outbound connections is Block, set the 2.3 Allow a Program Through Windows Firewall.

7 2. Settings for the Windows Firewall Allow a Program Through Windows Firewall Settings for Inbound Rules/Outbound Rules This is an example using Inbound Rules settings. For Outbound Rules as well. 1. Click the Inbound Rules (or Outbound Rules). 2. Select the Program check box at Rule Type Steps. Click the Next.

8 2. Settings for the Windows Firewall Select the This program path check box at Program Steps. Set the allow program from the software s installation folder and click Next. 4. Select the Allow the connection check box at Action Steps. Click Next.

9 2. Settings for the Windows Firewall Specify the profiles for which this rule applies at Profile Steps. Click Next. 6. Specify the name of this rule at Name Steps, and click the Finish. 7. Set permissions for each program using the same steps.

10 Appendix. App-1 Appendix. Programs that can be granted permission Programs that may be influenced by the Windows firewall are as given below. All programs in your PC environment are not necessarily affected by the Windows firewall. If the problem is not solved even before checking the Windows firewall settings (see chapter 1, "Effects of the Window Firewall") and you suspect that the firewall is causing a malfunction, refer to the following to allow the program to pass the firewall. Application software Model Programs MX100 Standard Software MX MXCalibE.exe MxEngine.exe MXStandardE.exe MW100 Viewer Software MW MWCalibE.exe MwIPSetE.exe DAQ32 DP DWDigitalE.exe DWEnvE.exe DWMainE.exe DWMonitorE.exe DWSettingE.exe DWWaveE.exe DAQSTANDARD DXA120 DXConfigureE.exe DXPConfigE.exe DxViewerE.exe DAQStudio DXA170 DAQStudioE.exe DAQManager DXA250 Non DAQLOGGER WX101 MLDdeSrvrE.exe MLEnvironmentE.exe MLFtpE.exe MLLoggerE.exe MLManagerE.exe MLMonitorE.exe MLMonitorSrvrE.exe MLRemoConSvrE.exe MLSettingE.exe MLSmtpE.exe MLTagSettingE.exe DAQLOGGER Client WX81 MLRemoteControllerE.exe RMClientE.exe DAQ32 Plus WX102 DWDdeE.exe DWEnvE.exe DWMainE.exe DWMonitorE.exe DWServerE.exe DWSettingE.exe DWTagE.exe RMClientE.exe DAQ32 Plus Client WX82 RMClientE.exe

11 Appendix. App-2 Application software Model Programs MXLOGGER WX103 MXCalibE.exe MXDdeE.exe MxEngine.exe MXExtendE.exe MXFtp.exe MXServerE.exe MXSmtpE.exe DAQEXPLORER WX104 DAQCommunicationE.exe DXADVConfigE.exe DXConfigE.exe DXDeskTopE.exe DXServerE.exe RMClientE.exe AddMulti WX12 DMLauncherE.exe DMLoggerE.exe DMMonitorE.exe DMMonitorSrvrE.exe DMOverviewE.exe AddTrigger WX13 TRLauncherE.exe TRLoggerE.exe TRMonitorE.exe TRMonitorSrvrE.exe AddObserver WX11 DAQBuilderE.exe RMPanelE.exe AddObserver Runtime WX83 RMPanelE.exe GateCONTROL WX1 GateCONTROLE.exe GateMODBUS WX1 GateModbusConfigE.exe GateModbusE.exe GateDXP WX1 GateDXPConfigE.exe GateDXPE.exe GateuR WX1 GateMRE.exe GateOPC WX1 GateOPCConfigE.exe GateOPCInfoE.exe GateOpcE.exe GateWT WX1 GateWTConfigE.exe GateWTE.exe GateEye WX1 GATEEYEE.exe GateMXMW WX1 GateMX100E.exe DataBrowser WX1 DBClientE.exe DBServerE.exe RXA10 Configuration Software RXA10 CopyToolE.exe urconfiguratione.exe

12 Revision Information i Title : Windows 7 Firewall Settings Operation Guide (To correctly operate recorder related software) Manual number : September. 2010/1st Edition Newly published. Written by Yokogawa Electric Corporation Published by Yokogawa Electric Corporation Nakacho, Musashino-shi, Tokyo , JAPAN