Please take note that only the document on paper support shall be considered as the authentic ACAE Certificate of conformity.
|
|
- Rafe Payne
- 8 years ago
- Views:
Transcription
1 Subject: Compact Disk (CD) of ACAE Certificate of conformity Please take note that only the document on paper support shall be considered as the authentic ACAE Certificate of conformity. ACAE General Secretary Virginio Scarioni MOD 137 E Revisione 01
2 A C A E ASSOCIAZIONE PER LA CERTIFICAZIONE DELLE APPARECCHIATURE ELETTRICHE Via Tito Livio, BERGAMO (Italy) Tel acae@acaecert.it Certificate of conformify tro A l3.02llf. page I of 1 Apparatus: MV bushing "Plug-in inside cone" 24kV - 250A for MV/LV transformers This Certificate applies only to the apparatus tested. The responsibility for conformity of an] apparatus having the same designation with that tested rests \\ tth îhe manul'acturer or responsible vendor. Onll integral reproduction of this Certificate or reproductions ofthis page accompanied by an] page(s) on u'hich are stated the tests perlormed and the a:signed rated characteristics of the apparatus tesied. are permined * ilhout u ritten pennission tiom the ACAE. Designation: VEGA/S 3018 ENEL Code Manufacturer or responsible vendor: ELETTRORESIN S.r.l. Via 302 Zona Indus. Basso Marino Ascoli Piceno Product manufactured by ELETTRORESIN S.r.l. in the factory at Zona Industriale Basso Marino - Ascoli Piceno -Italv Tested for: ELETTRORESIN S.r.l. Tested by: Elettroresin S.r.l. Laboratory ABB Sace S.p.A. - ACAE IA 01 Laboratory Omeco S.r.l. Laboratory CMTE of "Dipartimento di Ingegneria Elettrica" - Genova University Laboratory Standard and technical specification : -ENEL DJ 11l l Ed.2 March ENEL DJ 1561 Ed.ZMarch ENEL DJ 4855 June 1994 draft -ENEL Global Standard GSTOOI Rev.01 of This document certifies the compliance of the tested Apparatus with the above mentioned Specifi cation and Standards. This certificate is based on the ACAE "lnspection and evaluation repolt,' : N. RIV Issue Date : carried out according to the ENEL Distribuzione S.p.A. procedure CERT/01 Ed.l- September PRD NOOTOB Signatory of EA, IAF and ILAC Mutual Recognition Agreements The General Secretary Date: MOD 006 I pag.1 Revisione
3 ACAE Rtv /E 1 di3 lndice ' Object Place and date of the inspections Reference Specifi cations Verification of the Laboratory ability Tests performed ldentification of the specimens Minutes of the inspections Non conformaty Conformity assessment of the product Emitted and verified by the ACAE Technical lnspector Emani Besana Vt"tt-rvtl Approved by the ACAE General Secretary Virginio Scarioni À iìtil['^i fts'î&r,rr*" É. Firmatslon....'...u...J...^
4 ACAE Rtv /E 2di3 1. Object This report is to show the ACAE operations canied-out to ENEL CERT/OIprocedure for the verification of the tests canied-out on the MV bushing plug-in 24 kv for transformers MT/BT according to ENEL Specificatio DJ '1111 manufacíured by Elettroresin SrL The dimentions of the product are shown in the drawings VEGA/S3018 (Annex l),scher301b (AnnexlA),SCHER301 B-T (Annex I B),GUAR301 B (Annex 1G) This product was certfied by ACAE with number and issue date The scope of this new certification is to verify the performance of the product without the silver application on the surface of the conductor drawing PAS2G Mod-1 issue date (Annex 2) 2. Place and date of the inspections rhe inspect'""-" nil:,ffi:j"ffs:ffiy#-*"tj'bn"ff:igre Basso Marino Ascori piceno ABB Sace SpA-Via Baioni Bergamo OMECO sd -Via Monviso Monza (Mi) CMTE del Dipartimento di Ingegneria Elettrica dell'università di Genova Via in the ti,'. ort;st all:offir;,l;?;n i:;j?.t8#ind in the day 12.o4.2o13 3. ReferenceSpecifications. Procedura per la certificazione dei materiali destinati ad Enel Distribuzione CERT/01 Ed.1 Settembre Specifica ENEL DJ 1111Ed.2Marzo 1994 "lsolatore passante con presa a spina 24kV 250A per trasformatori MT/BT. Specifica ENEL DJ 't561 Éd-2Marzo 1994" Prescrizioni per il collaudo degli isolatori passanti con prese a spina 24kV,25OA per trasformatori MT/BT. Specifica ENEL DJ 4855 Bozza Giugno 1994 "Prescrizioni per le prove dei componenti degli accessori per cavi di energia". Global standard ENEL GST001 "MV/LV Trasformers Rev.01 del Verificatio of the Laboratory ability -The Laboratory ABB Sace SpA has been qualified by ACAE with number la01.this Laboratory is also accreditated by SINAL with number 062 -The Laboratory Elettroresin srl is part of the factory operating in compliance of the standard ISO 9001 accreditated with certificate number 9191 ELRE issue date The Laboratory CMTE is part of Dipartimento di lngegneria Elettrica dell'università degli Studi di Genova -The laboratory OMECO srl is accreditated by SINAL with number The ACAE lnspector witnessed the tests canied-out in Elettroresin and CMT Laboratories. 5. Tests performed The product has been subjected to the type tests of the ENEL Specification DJ All the tests A ilt'-lt'^t ACA î.lrlme/name E.
5 ACìAE 23.O4.20'14 RIV 13_063/E 3di3 have been canied-out in the Laboratories of the point 2 The tests results are shown in the test reports -Elettroresin srl 005/08 issue date Annex 3 -ACAE la issue date Annex 4 -CMTE I2ZCMTEST issue date Annex 5 -OMECO SPT/0834/09 issue date Annex 6 -Elettroresin srl 004/13 issue date Annex 7 6. ldentification of the specimens After the end of the tests the ACAE lnspector has verified the characferistics of the specimens The documentation is annexed to this report -Documentation ENEL A&B Annex 8 -Photograph documents Annex 9 -Dimensionaland electricalcharacteristics Annexl0 -List of the components Annex f I -lnstructions for the assembly Annex l2 -List of the drawings Annex 13 -Conformity declaration Annex f 4 All the documents and drawings have been stamped and signed by the ACAE Inspector and by the technical responsible otf Elettroresin srl.one sample of the tested product will be kept by the manufacturer for the entire validity of the Certificate. 7. Minutes of the inspections. According to ACAE procedure,the tests in the Laboratories have been witnessed by the ACAE lnspector who composed the minutes with description of the procedure and results of the tests.all the minutes will be kept in the ACAE archive. 8. Non conformity During and at the end of the tests the ACAE lnspector didn't find non conformity, 9- Conformity evaluation of the product The positive results of the tests,the general performances and the verifìcations of the characteristics made by the drawings and documentations certifies the compliance of the tested product to the mentioned ENEL Specifications. lsptît0 reciltc0
Please take note that only the document on paper support shall be considered as the authentic ACAE Certificate of conformity.
Subject: Compact Disk (CD) of Certificate of conformity Please take note that only the document on paper support shall be considered as the authentic Certificate of conformity. General Secretary Virginio
More informationéq studio srl Technical product specification for the certification and communication of vegan products aimed at informed consumers.
éq studio srl Technical product specification for the certification and communication of vegan products aimed at informed consumers. Specifica Tecnica di prodotto STP QV Qualità Vegana Edizione 01 Revisione
More informationABB SACE SACE PR 211-212 S8 RH0064.001 L0478 1/6
Sganciatore elettronico di sovracorrente a microprocessore PR211 e PR212 per Isomax S8 Microprocessor based overcurrent release Isomax S8 PR211 and PR212 It En ABB SACE SACE PR 211-212 S8 RH0064.001 L0478
More informationRegulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004
Regulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004 00 24/04/2013 Annulla e sostituisce il documento Regulations for the certification of environmental
More informationCERTIFICATO N. CERTIFICATE No. EMS-3641/S CO.RIM.A. COMPAGNIA RIMORCHIATORI ANCONA S.R.L. ISO 14001:2004
CERTIFICATO N. CERTIFICATE No. EMS-3641/S SI CERTIFICA CHE IL SISTEMA DI GESTIONE AMBIENTALE DI IT IS HEREBY CERTIFIED THAT THE ENVIRONMENTAL MANAGEMENT SYSTEM OF CO.RIM.A. COMPAGNIA RIMORCHIATORI ANCONA
More informationRegulations for certification of quality management systems
Regulations for certification of quality management systems 00 24/04/2013 Annulla e sostituisce il documento Regulations for certification of quality management systems in rev. 14 SG DIR AD Rev. Data Descrizione
More informationMetal Working S.r.l. is an innovative company with a clear view. From design to products manufacturing, Metal Working takes care of every aspect of
COMPANY PROFILE Metal Working S.r.l. is an innovative company with a clear view. From design to products manufacturing, Metal Working takes care of every aspect of production in its headquarter in Trentino,
More informationEA IAF/ILAC Guidance. on the Application of ISO/IEC 17020:1998
Publication Reference EA IAF/ILAC-A4: 2004 EA IAF/ILAC Guidance on the Application of ISO/IEC 17020:1998 PURPOSE This guidance document is for ISO/IEC 17020: General Criteria for the operation of various
More informationIAF Informative Document. Transition Planning Guidance for ISO 9001:2015. Issue 1 (IAF ID 9:2015)
IAF Informative Document Transition Planning Guidance for ISO 9001:2015 Issue 1 (IAF ID 9:2015) Issue 1 Transition Planning Guidance for ISO 9001:2015 Page 2 of 10 The (IAF) facilitates trade and supports
More informationStrategies and partnerships for an energy-sustainable future SKILL. Air treatment solutions and environmental technology.
Strategies and partnerships for an energy-sustainable future SKILL g r o u p Air treatment solutions and environmental technology Company Profile Experience SKILL g r o u p SKILL Group benefits from thirty
More informationCheck-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
More informationIMQ RULES. Contents. IMQ Rules - Product certification
IMQ RULES PRODUCT CERTIFICATION "ELECTRIC ENERGY METERS AND METER UNITS" PRODUCT OF NEW MANUFACTURING Contents IMQ Rules - Product certification Particular Rules for the Electric energy meters and meter
More informationGeneral Rules for the certification of Management Systems
General Rules for the certification of Management Systems Effective from 19/11/2015 RINA Via Corsica 12 16128 Genova - Italy tel. +39 010 53851 fax +39 010 5351000 website : www.rina.org Technical rules
More informationAccreditation and Competence?
Accreditation and Competence? South African National Accreditation System Shadrack Phophi Presentation Layout 1. Brief history of SANAS 2. SANAS scope of activity 3. International recognition 4. Current
More information1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1
1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1 1 SUBJECT AND FIELD OF APPLICATION This document constitutes the special regulations
More informationInternational Accreditation Forum, Inc.
International Accreditation Forum, Inc. IAF-AM-13-001 Page 1 of 6 Resolutions adopted at the IAF 27th General Assembly 23rd and 25th October 2013 Lotte Hotel, Seoul, South Korea IAF Resolution 2013-01
More informationAccreditation according to ISO/IEC 17025 in Europe. Historic EA Europeing Accreditation Assessment Experience from Technical assessment
Accreditation according to ISO/IEC 17025 in Europe Historic EA Europeing Accreditation Assessment Experience from Technical assessment 1 In year 1803 the foots in Europe had a big differences, depending
More informationEnvironmental Product Declaration. Registration number: S-P-00047. Rev. 0 11/06/03. Tmax T1. Low voltage circuit breaker.
Environmental Product Declaration Registration number: S-P-00047 Rev. 0 11/06/03 Tmax T1 Low voltage circuit breaker ABB SACE SpA Information about the company and the product This document aims to provide
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2016 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
More informationCOSTRUZIONI ELETTROTECNICHE
COSTRUZIONI ELETTROTECNICHE COSTRUZIONI ELETTROTECNICHE La C.&B. costruzioni elettrotecniche costruisce e progetta quadri MT/BT, quadri di comando, controllo, automazione e rifasamento per l industria
More informationACCREDIA - The Italian Accreditation Body. ACCREDIA and the Italian Accreditation System
ACCREDIA - The Italian Accreditation Body ACCREDIA and the Italian Accreditation System 1-26 June 2013 The way forward SINAL 1988 SINCERT 1991 ACCREDIA 2009 The new Italian accreditation Body was created
More informationAMDx4 INTERFACE CONTROL PANEL FOR AUTOMATIC SOFTENERS AM/D METER
AMDx4 INTERFACE CONTROL PANEL FOR AUTOMATIC SOFTENERS AM/D METER INSTRUCTIONS MANUAL INSTRUCTIONS FOR INSTALLATION OPERATION & MAINTENANCE WARNING! The equipment must be used only for the utilization for
More informationAccreditation in Europe
Accreditation in Europe Facilitating regulatory compliance and international trade ACCREDITATION INSPECTION TESTING CALIBRATION EXAMINATION VERIFICATION CERTIFICATION About the EA The EA is appointed by
More informationMINUTES OF THE ADMINISTRATIVE COMMITTEE: EVALUATION OF THE REQUIRED INTEGRATIONS
REALIZATION OF A RESEARCH AND DEVELOPMENT PROJECT (PRE-COMMERCIAL PROCUREMENT) ON CLOUD FOR EUROPE MINUTES OF THE ADMINISTRATIVE COMMITTEE: EVALUATION OF THE REQUIRED INTEGRATIONS UNDER SECTION 13 OF THE
More informationIAF Informative Document. IAF Informative Document for the Transition of Management System Accreditation to ISO/IEC 17021:2011 from ISO/IEC 17021:2006
IAF ID 2:2011 International Accreditation Forum, Inc. IAF Informative Document IAF Informative Document for the of Management System Accreditation to ISO/IEC 17021:2011 from (IAF ID 2:2011) The International
More informationElectromechanical and automation. s.r.l. Company Profile
Electromechanical and automation s.r.l. Company Profile Index OUR COMPANY BUSINESS AREAS QUALITY CERTIFICATION SOA CERTIFICATE COMPANY DATA RESOURCES WORKS CARRIED OUT / UNDER PROGRESS 2 Our Company I.R.EM.s.r.l.
More informationWilfred C. LaRochelle Principal Nuclear Consultant HSB Global Standards, USA
Wilfred C. LaRochelle Principal Nuclear Consultant HSB Global Standards, USA ASME Vice President, Conformity Assessment and Vice Chairman of Committee on Nuclear Certification 2nd NRC Workshop on Vendor
More informationBelgrade 12 December 2011. Luke Brucato Manager CRIF Certification Services l.brucato@crif.com
Belgrade 12 December 2011 Luke Brucato Manager CRIF Certification Services l.brucato@crif.com Agenda Why does property valuation matter? The EC Mortgage Credit Directive Proposal impact on the bank What
More informationIAF Mandatory Document for the Transfer of Accredited Certification of Management Systems
IAF MD 2:2007. International Accreditation Forum, Inc. IAF Mandatory Document IAF Mandatory Document for the Transfer of Accredited Certification of Management Systems (IAF MD 2:2007) IAF MD2:2007 International
More informationRules for the certification of IT (Information Technology) Service Management Systems
Rules for the certification of IT (Information Technology) Service Management Systems Effective from 1 July 2010 RINA Via Corsica 12 16128 Genova - Italia tel +39 010 53851 fax +39 010 5351000 web site:
More informationGUIDALINES FOR APPLICATION FORMS
GUIDALINES FOR APPLICATION FORMS SUBJECT: TENDER NO. GCG000123054 - AS PONTES COAL FIRED POWER PLANT SPAIN DEI COMPLAINCE EPC ENVIROMENTAL REFURBISHMENT WORKS GUIDALINES FOR APPLICATION FORMS Binding Entity
More informationScheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme
Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification
More informationAchieving Effectiveness and Compliance
Achieving Effectiveness and Compliance Paul Palmes Business Standards Architects, Inc. Fargo ND Prescott, WI pcpalmes@cableone.net www.pdcauditing.com 701-371-8224 I-29 Manufacturers Conference Thursday,
More informationApplication of ISO/IEC 17011 for the Accreditation of Food Safety Management Systems (FSMS) Certification Bodies
IAF Mandatory Document Application of ISO/IEC 17011 for the Accreditation of Food Safety Management Systems (FSMS) Certification Bodies (IAF MD 16:2015) Version 2 Food Safety Management Systems (FSMS)
More informationAn Alternative Method for Maintaining ISO 9001/2/3 Certification / Registration
International Accreditation Forum, Inc. An Alternative Method for Maintaining ISO 9001/2/3 Certification / Registration A Discussion Paper The International Accreditation Forum, Inc. (IAF) operates a program
More informationCable Trays and Ducts (Metallic)
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-P009 Cable
More informationCopyright, Language, and Version Notice The official language of this [Certification Protocol] is English. The current version of the [Certification
Copyright, Language, and Version Notice The official language of this [Certification Protocol] is English. The current version of the [Certification Protocol] is maintained on the Bonsucro website: www.bonsucro.com.
More information1937 The company starts to produce wooden toys, and soon conquers the Italian market.
V A L S E C C H I G R O U P C O M P A N Y P R O F I L E Since 1918 In 1918 Giacomo Valsecchi, the grandaddy of present owners, starts activity in Calolziocorte (Lc) with the enrollment in the Chamber of
More informationAudit of the control body through the monitoring of compliance with control plan. Measures for the irregularities
Workshop on verification of compliance with product specification for PDO, PGI and TSG Audit of the control body through the monitoring of compliance with control plan Measures for the irregularities Viktorija
More informationSURVEY OF HARMONIC DISTORTION IN LV AND MV NETWORKS: RESULTS AND CORRECTIVE STRATEGIES
SURVEY OF HARMONIC DISTORTION IN LV AND MV NETWORKS: RESULTS AND CORRECTIVE STRATEGIES E Bompard*, E Carpaneto*, R Napoli*, P Ribaldone**, C Vercellino** * Dipartimento di Ingegneria Elettrica Industriale,
More informationInfo 15:2 TRAINING 2015/2016. Info 13:19
Info 15:2 TRAINING 2015/2016 Info 13:19 1 2 Info 13:19 S WELCOME TO SWEDAC ACADEMY... 4 TRAINING PROGRAM AND COURSES 2015/2016... 7 1. HOW TO RUN AN ACCREDITATION BODY ISO/IEC 17011... 7 2. LEAD ASSESSOR
More informationELENCO PROVE ACCREDITATE - CATEGORIA: 0
Scheda 1 di 8 ELENCO PROVE ACCREDITATE - CATEGORIA: 0 Concentrator photovoltaic (CPV) modules and assemblies 10.1 Ispezione visiva / Visual inspection IEC62108:2007 10.1 + CEI IEC 61215:2005 10.1 10.10
More informationEA-7/01. EA Guidelines. on the application. Of EN 45012. Publication Reference PURPOSE
Publication Reference EA-7/01 EA Guidelines on the application Of EN 45012 PURPOSE The purpose of the document is to provide explanations with a view to harmonise the application of ISO/IEC Guide 62/EN
More informationCriminal Justice Offender Tracking System Certification Program Requirements
U.S. Department of Justice Office of Justice Programs National Institute of Justice Criminal Justice Offender Tracking System Certification Program Requirements NIJ CR-1004.00.00 June 2012 NCJ xxxxxx National
More informationIAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:201X from ISO/TS 22003:2007
IAF Informative Document IAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:201X from ISO/TS 22003:2007 (IAF ID X:201X) Page 2 of 6 The (IAF) details
More informationMemorandum of Understanding
Memorandum of Understanding between Department for Business, Innovation and Skills and United Kingdom Accreditation Service Page 1 of 13 Contents 1 Purpose... 3 2 Background... 3 3 Scope of activity...
More informationMASTER OF ARTS DEGREE PROGRAMS ACADEMIC MASTER PROGRAM
Mod. 4/29/1 REV 0 del 13/11/2014 Pag. 1/7 APPLICATION FORM MASTER OF ARTS DEGREE PROGRAMS ACADEMIC MASTER PROGRAM JANUARY 2016 Print-out each page of this form. Please print clearly or type your answers
More information2 0 1 0 S O C K E T S & P L U G S
0 1 0 S O C K E T S & P L U G S eurolites.it PRESA-SPINE POLI - 6-1-V SOCKET-PLUGS POLES - 6-1-V PRESA POLI 6-1-V - 16 A - CORPO IN PLASTICA POLES SOCKET 6-1-V - 16 A - PLASTIC HOUSING SYSTEM ACCORG 8.800.00
More information(Draft) Transition Planning Guidance for ISO 9001:2015
ISO/TC 176/SC2 Document N1223, July 2014 (Draft) Transition Planning Guidance for ISO 9001:2015 ISO 9001 Quality management systems Requirements is currently being revised. The revision work has reached
More informationTHE LAW OF THE REPUBLIC OF ARMENIA ON ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE CHAPTER 1. GENERAL PROVISIONS. Article 1. The subject of the Law
THE LAW OF THE REPUBLIC OF ARMENIA ON ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE CHAPTER 1. GENERAL PROVISIONS Article 1. The subject of the Law 1. This Law regulates relations linked to application
More informationETSI SR 003 091 V1.1.2 (2013-03)
SR 003 091 V1.1.2 (2013-03) Special Report Electronic Signatures and Infrastructures (ESI); Recommendations on Governance and Audit Regime for CAB Forum Extended Validation and Baseline Certificates 2
More informationINTEROPERABILITY UNIT
INTEROPERABILITY UNIT MODULES FOR THE PROCEDURES FOR ASSESSMENT OF CONFORMITY, SUITABILITY FOR USE AND EC VERIFICATION TO BE USED IN THE TECHNICAL SPECIFICATIONS FOR INTEROPERABILITY Reference: Version
More informationENVIRONMENTAL TEST REPORT
INFN - Roma doc: UG crate FM - ESS date: 9/12/08 pag: 1 /12 ENVRPT33_S3019R-UG crate FM_ESS- date: December 09, 2008 Prot: 001-09/SERMS signature test report prepared by: test report controlled by: 09/12/08
More informationCostruzioni Elettrotecniche Cear srl Company Overview
Costruzioni Elettrotecniche Cear srl Company Overview Sistemi Integrati dal bit al kilovolt Integrated System from bit to kilovolt VIA MONZA, 102 20060 GESSATE (MI) ITALY Ph. +39-02-929290.1 Fax +39-02-92151670
More informationFederal law on certification services in the area of the electronic signature
Law on the electronic signature 94.0 Notice This English translation has no official character. The only authentic texts are the German, French and Italian versions published in the Official Compendium
More informationInternational Accreditation Forum, Inc.
IAF ML 3:2012 IAF MLA Document GUIDANCE FOR RESPONDING TO INQUIRIES ON IAF MLA SIGNATORY EQUIVALENCE AND ON THE ACCEPTANCE OF CERTIFICATION DOCUMENTS (IAF ML 3:2012) SIGNATORY EQUIVALENCE AND ON ACCEPTANCE
More informationOIML D 18 DOCUMENT. Edition 2008 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
INTERNATIONAL DOCUMENT OIML D 18 Edition 2008 (E) The use of certified reference materials in fields covered by metrological control exercised by national services of legal metrology. Basic principles
More informationInternational Laboratory Accreditation Cooperation. Laboratory Accreditation or ISO 9001 Certification? global trust. Testing Calibration Inspection
International Laboratory Accreditation Cooperation Laboratory Accreditation or ISO 9001 Certification? Laboratory Accreditation or ISO 9001 Certification? When selecting a supplier to fulfill your testing,
More informationThe IAF Multilateral Recognition Arrangement (MLA) Certified Once Accepted Everywhere
The IAF Multilateral Recognition Arrangement (MLA) Certified Once Accepted Everywhere Supporting the acceptance of goods and services across national borders Accreditation provides an assurance to government,
More informationIAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:2013 from ISO/TS 22003:2007
IAF Informative Document IAF Informative Document for the Transition of Food Safety Management System Accreditation to ISO/TS 22003:2013 from ISO/TS 22003:2007 (IAF ID 8:2014) Page 2 of 6 The (IAF) details
More informationMASTER OF ARTS DEGREE PROGRAMS
Mod. 4/29/1 REV 0 del 13/11/2014 Pag. 1/7 APPLICATION FORM MASTER OF ARTS DEGREE PROGRAMS academic master program october 2015 Print-out each page of this form. Please print clearly or type your answers
More informationIAF Mandatory Document for the use of Computer Assisted Auditing Techniques ( CAAT ) for Accredited Certification of Management Systems
IAF MD 4:2008 International Accreditation Forum, Inc. IAF Mandatory Document IAF Mandatory Document for the use of Computer Assisted Auditing Techniques ( CAAT ) for Accredited Certification of (IAF MD
More informationGeneral Description of The CMC- Services
STANDARD FOR CERTIFICATION No.1.1 General Description of The CMC- Services JANUARY 2013 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version The
More informationHong Kong Accreditation Service
Hong Kong Accreditation Service HKAS 009 Notification of Changes Name of organisation: Reg. No.: Authorised representative: (Name) (Signature) Date: Please return this form to HKAS Executive accompanied
More informationMandate for Society/Club/Association
Society/Club/Association Mandate for Society/Club/Association Guidelines for completing this mandate Please read these notes carefully before completing this mandate and ensure all pages of the mandate
More informationNew SACE Emax 2 for UL 1066 From Circuit Breaker to Power Manager
New SACE Emax 2 for UL 1066 From Circuit Breaker to Power Manager 2 1SDC200039B0201 New SACE Emax 2 for UL 1066 Circuit breakers switch power SACE Emax 2 manages it. SACE Emax 2 is the new benchmark of
More informationApplication for Approved (Overseas/Local) Third Party Inspection Agency for Lifting Equipment
Occupational Safety and Health Division 18 Havelock Road #03-02 Singapore 059764 Tel: 64385122 www.mom.gov.sg mom_oshd@mom.gov.sg Application for Approved (Overseas/Local) Third Party Inspection Agency
More informationNABL accreditation is a formal recognition of the technical competence of a medical testing laboratory
NABL accreditation is a formal recognition of the technical competence of a medical testing laboratory Third party assessment NABL has Mutual Recognition Arrangement with APLAC and ILAC NABL accredited
More informationETSI TS 102 778 V1.1.1 (2009-04) Technical Specification
TS 102 778 V1.1.1 (2009-04) Technical Specification Electronic Signatures and Infrastructures (ESI); PDF Advanced Electronic Signature Profiles; CMS Profile based on ISO 32000-1 2 TS 102 778 V1.1.1 (2009-04)
More informationDECLARATION DE CONFORMITE Declaration of Conformity
DECLARATION DE CONFORMITE Declaration of Conformity Nous, We, ABB Control (nom du Fournisseur / Supplier's name) 10 rue ampère, ZI 69685 CHASSIEU (France) (adresse / address) déclarons sous notre seule
More informationRG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
More informationUNCONTROLLED COPY FOR REFERENCE ONLY
CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President
More informationETSI TS 102 640-3 V1.1.1 (2008-10) Technical Specification
TS 102 640-3 V1.1.1 (2008-10) Technical Specification Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM); Architecture, Formats and Policies; Part 3: Information Security
More informationRAPPORTO DI PROVA TEST REPORT
RAPPORTO DI PROVA TEST REPORT Titolo (Title): DEGREES OF PROTECTION PROVIDED BY EMPTY ENCLOSURES (IP55 CODE) on UNIVERSAL RACK UR181110 Richiedente (Customer): - Ente/Società (Dept./Firm): C.E.P.I RACK
More informationTOTAL QUALITY MANAGEMENT II QUALITY AUDIT
TOTAL QUALITY MANAGEMENT II Chapter 13: QUALITY AUDIT Dr. Shyamal Gomes Introduction: The term audit was defined in the 16th Century as the official examination of the accounts with verification by reference
More informationSIIV SUMMER SCHOOL 2013 PADOVA (Italy) 9 th -13 th September 2013. Innovative Research on Materials and Technologies for Transport Infrastructures
SIIV SUMMER SCHOOL 2013 PADOVA (Italy) 9 th -13 th September 2013 Innovative Research on Materials and Technologies for Transport Infrastructures SIIV - Italian Society of Road Infrastructure and the Dept.
More informationQuality Management System. Manual
Quality Manual ISO 9001 Quality Approved by: JTH Page 1 of 7 Introduction The adoption of a Quality is a strategic decision of an organization. Industrial Scale Ltd. has instituted a formal Quality as
More informationGLOBALG.A.P RISK ASSESSMENT ON SOCIAL PRACTICE (GRASP)
GLOBALG.A.P RISK ASSESSMENT ON SOCIAL PRACTICE (GRASP) - GGN:4049928144348 Registration number of producer/ producer group (from CB):CSQA 1103P001 - - PROOF OF ASSESSMENT According to GRASP General Regulations
More informationPersonal information. Desired employment / Occupational field. Work experience. First name(s) / Surname(s) Renato PROCOPIO
Personal information First name(s) / Surname(s) Renato PROCOPIO Address(es) 2/2, Via Montesisto, 17100, Savona, Italy Telephone(s) Mobile: +393401054879 Fax(es) E-mail renato.procopio@unige.it Nationality
More informationEN20 EN50. Double-stage modular decompression unit for oenological application. FEATURES Dual inlet and single outlet decompression unit.
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com EN20 EN50 Double-stage modular decompression unit for oenological application FEATURES
More informationINDEPENDENT TESTING LABORATORY
INDEPENDENT TESTING LABORATORY CERTIFICATION PROCESS ITL CERTIFICATION CHECKLIST QUALIFICATIONS and CONDITIONS of CERTIFICATION MGC Gaming Technology Laboratory March 2015 Rev 3 9 15 Version 12.0 Independent
More informationThe Graphosign signature
Environment prot SpA Information Technology Graphosign signature with legal validity Saving in time and money Graphosign signature with legal No risks of signature counterfeiting Online and offline operation
More informationPHYTOSANITARY CERTIFICATION SYSTEM
ISPM 7 INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES ISPM 7 PHYTOSANITARY CERTIFICATION SYSTEM (2011) Produced by the Secretariat of the International Plant Protection Convention FAO 2011 ISPM 7 Phytosanitary
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18852 Third edition 2015-06-01 Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) Ingrédients
More information1400 Independence Avenue, SW. Room 2646-S, STOP 0268 Washington, DC 20250-0201 Applicant Name: BioAgriCert s.r.l. (BAC) Est. Number: N/A Physical Address: Via dei Macabraccia 8 40033 Casalechhio di Reno
More informationIAF Mandatory Document
IAF MD15:2014. IAF Mandatory Document IAF MANDATORY DOCUMENT FOR THE COLLECTION OF DATA TO PROVIDE INDICATORS OF MANAGEMENT SYSTEM CERTIFICATION BODIES PERFORMANCE (IAF MD15:2014) Issued: 14 July 2014
More informationVersione 2.0 Autori Sede legale e Direzione Generale: E-mail: Internet: Capitale sociale Partita IVA
2015 COMPANY PROFILE Versione Autori 2.0 N&C s.r.l. Sede legale e Direzione Generale: Via Bosco s.n. 73010, Veglie (LE), Tel. e fax +39.0832 970190-970005 E-mail: nec@nectelecomunicazioni.it Internet:
More informationDistretto Green and High Tech Monza Brianza
Distretto Green and High Tech Monza Brianza Company Presentation A bit of history Who : The Distretto Green and High Tech Monza Brianza was founded by : Provincia di Monza Brianza (formerly Provincia di
More informationREFERENTIEL- SODERN. Autre référence / Other reference :
Classification: NC Page : 1/8 Autre référence / Other reference : Type: Sector procedureprocédure sectorielle. Description: Exigences qualité pour les fournisseurs de Sodern version anglaise / Quality
More informationISO 14001 Registration Guidance Document
Introduction ISO 14001 Registration Guidance Document ISO 14001:2004 emphasizes the continuous improvement of an environmental management system (EMS). The standard specifies requirements for an environmental
More informationRules for the certification of Quality Management Systems
Rules for the certification of Quality Management Systems Effective from September 15 th, 2015 RINA Via Corsica, 12 16128 Genova - Italy Tel.: +39 01053851 Fax: +39 0105351000 Web site: www.rina.org Technical
More informationDZ MEDICALE S.r.l. Organismo Notificato n. 0476. European Notified Body n. 0476. Reg. No: MED 9913
CERTIFICATO CE DEL SISTEMA DI GARANZIA DELLA QUALITÀ EC Quality Assurance System Certificate Si certifica che, sulla base dei risultati degli audit effettuati, il Sistema completo di garanzia di Qualità
More informationMASTER OF ARTS DEGREE PROGRAMS ACADEMIC MASTER PROGRAM
Mod. 4/29/1 REV 1 del 25/11/2015 Pag. 1/8 APPLICATION FORM MASTER OF ARTS DEGREE PROGRAMS ACADEMIC MASTER PROGRAM ACADEMIC YEAR 2016/2017 Print-out each page of this form. Please print clearly or type
More informationComparative analysis between the possible regulatory approaches to GMP compliance TITOLO PRESENTAZIONE
Comparative analysis between the possible regulatory approaches to GMP compliance TITOLO PRESENTAZIONE Dr. Fulvio CARLOTTI, GNOSIS SpA, Corporate QA Director September 26, 2014 Scope of GMP GMP compliance
More informationTerms of Reference of the SEPA Cards Certification Management Body (SCCMB)
Terms of Reference of the SEPA Cards Certification Management Body (SCCMB) Draft V1.0.1 2 nd June 2015 1 DEFINITIONS A Card Payment Scheme/Approval Body is an organisation that is subject to Oversight
More informationABSTRACT. The Guidelines Section F is related to the Purchasing requirements of NSQ100 (Chapter 7.4). Summary
Page 1 / 9 ABSTRACT This document is the Section F to NSQ-100 Guidelines. Its objective is to help to the understanding of NSQ-100 requirements through some examples or recommendations and descriptions
More informationECBS TR 201V2.2.22, MARCH 2003 REGISTER OF EUROPEAN ACCOUNT NUMBERS ITALY 61
REGISTER OF EUROPEAN ACCOUNT NUMBERS ITALY 61 Italy DOMESTIC ACCOUNT NUMBER Account Number Structure 1 12345 12345 123456789012 X 05428 11101 000000123456 Identifying Min/max Fills Example c 1 Check digit
More informationRemuneration (in Type of services. User of the service Entity providing the service
322 Information pursuant to Art. 149k of the Consob s Regulations on Issuers This table reports the 2011 fees due for the auditing and other than auditing services provided by the Audit firm or by other
More informationImproving the quality of certification, measurement, verification and validation of conformity assessment results Dr Elsabe Steyn
Improving the quality of certification, measurement, verification and validation of conformity assessment results Dr Elsabe Steyn SANAS 30 years of accreditation experience SANAS is recognized as the only
More informationPRESE -SPINE -CAVI A NORME ISO sockets plugs cables ISO standard
PRESE SPINE CAVI A NORME ISO 827175/3 SPINA A 5 POLI 24 V (ABS) 24 V 5 pins plug (ABS) IN MATERIALE TERMOPLASTICO NERO, AGGANCIO RAPIDO, CONTATTI FEMMINA IN OTTONE NICHELATO (CONFORME ISO 7638) Hygrade
More information