New Braunfels ISD Career & Technical Education Pathways Alamo Academies

Transcription

1 New Braunfels ISD Career & Technical Education Pathways Alamo Academies N ew Braunfels ISD has participated in the Alamo Academies offered through Alamo Colleges for more than 10 years. Students have the opportunity to participate in either the Aerospace Academy, Advanced Technology and Manufacturing Academy (ATMA), Heavy Equipment Academy, or the Information Technology and Security Academy (ITSA). The Alamo Academies is a nationally-recognized Science, Technology, Engineering and Mathematics (STEM)-based instructional model operated by the Alamo Area Academies Inc., local industry, Alamo Colleges, area high schools and cities. The Academies provide students with tuition-free career pathways into STEM occupations that are in high demand in Texas. Academy Highlights Each Academy is a two-year program beginning in the junior year. Students earn up to 15 free college credit hours per year (at no personal cost) while also earning three high school Career and Technical Education elective credits. NBISD provides transportation services to all academy sites every day. Students begin their day taking dual credit and then return to the high school by third period to finish out the day. Students accepted into the Academy retain their UIL eligibility to participate in extra-curricular athletic or academic activities if desired. The Alamo Academies offer students an industry-paid internship in the summer between their junior and senior years. Students work eight weeks full time for a participating employer, earning around $3,000. Local industries have agreed to provide hiring preference to successful interns after graduation and the majority of industry partners have tuition reimbursement programs. Student Enrollment Checklist Step 1: Attend an informational assembly on in the New Braunfels High School Auditorium. Students must sign up ahead of time in the NBISD College and Career Center to be eligible to attend. The next assembly will be in January Step 2: Complete the one-page Alamo Academies application which is found on the website: Link to Apply Now. Step 3: Complete the ApplyTexas application at Once this is completed you will receive two s; one from ApplyTexas and one from Alamo Colleges. Step 4: Follow the instructions from your Alamo Colleges to complete GOFARR and AlamoENROLL modules. This can also be found at Step 5: Take the TSI assessment through Alamo Colleges or your high school s approved testing site; keep a copy of your scores. Note: The NBISD College and Career Center will be open after schoolfebruary so students can complete the TSI assessment. Step 6: Complete the Dual Credit Form found at the following link: Step 7: Provide documentation you have received the bacterial meningitis vaccination to your high school counselor and keep a copy. Visit for specific instructions. Step 8: Interested students must return completed packets to the NBISD College and Career Center to be considered for an Alamo Academies slot. All items must be completed in full to ensure you are eligible for early admissions. Contact the Alamo Academies at or the NBISD College and Career Center at for more information.

2 ITSA (Information Technology & Security Academy) Central Texas Technology Center Certificate of Completion: Information Technology and Security NBISD Course Credit PEIMS # High School ITSA Year One *College Course College Research in Information Technology Solutions ITSC Fall ITSA Year Two ITSC Fall Semester ITCC Spring ITSY Spring ITSY Summer Research in Information Technology Solutions II ITSC Fall Total ITCC Fall ITCC Spring ITCC Spring 6 33 *See ITSA Academy Course Descriptions next page

3 New Braunfels ISD Career & Technical Education Pathways ITSA (Information Technology & Security Academy) Central Texas Technology Center Certificate of Completion: Information Technology and Security Fall Semester Year 1 (2 7 credits) (2 /7 /credit Summer Semester Year 1 course / 4 credits) (1 (1 course /4 credit ITSC 1305 Introduction to PC Operating Systems Introduction to personal computer operating systems including installation, configuration, file management, memory and storage management, control of peripheral devices, and use of utilities. Basic computer skills are required. (3 credits) ITSY 2486 Internship Computer and Information Systems Security (4 credits) A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. ITSC 1425 Personal Computer Hardware Current personal computer hardware including assembly, upgrading, setup, configuration and troubleshooting. (4 credits) Spring Semester Year 1 7 credits) (2 (2 /7 /credit ITCC 1401 Cisco Exploration 1 Network Fundamentals A course introducing the architecture, structure, functions, components, and models of the Internet. Describes the use of OSI and TCP layered models to examine the nature and roles of protocols and services at the applications, network, data link, and physical layers. Covers the principles and structure of IP addressing and the fundamentals of Ethernet concepts, media, and operations. Build simple LAN topologies by applying basic principles of cabling; perform basic configurations of network devices, including routers and switches; and implementing IP addressing schemes. Basic computer skills are required. (4 credits) ITSY 1342 Information Technology Security Instruction in security for network hardware, software, and data, including physical security; backup procedures; relevant tools; encryption; and protection from viruses. (3 credits) Fall Semester Year 2 7 credits) (2 (2 /7 /credit ITSC 1307 Unix Operating System I A study of the UNIX operating system including multi-user concepts, terminal emulation, use of system editor, basic UNIXX commands, and writing script files. Includes introductory system management concepts. (3 credits) ITCC 1404 Cisco Exploration 2 Routing Protocols and Concepts Prerequisites: ITCC 1401 or concurrent enrollment This course describes the architecture, components, and operation of routers, and explains the principles of routing and routing protocols. Students analyze, configure, verify, and troubleshoot the primary routing protocols RIPv1, RIPv2, EIGRP, and OSPF. Recognize and correct common routing issues and problems. Model and analyze routing processes. (4 credits) Spring Semester Year 2 (2 / 8 credits) (2 /8 credit ITCC 2408 Cisco Exploration 3 LAN Switching and Wireless This course helps students develop an in-depth understanding of how switches operate and are imple- mented in the LAN environment for small and large networks. Detailed explanations of LAN switch operations, VLAN implementation, Rapid Spanning Tree Protocol (RSTP), VLAN Trunking Protocol (VTP), Inter-VLAN routing, and wireless network operations. Analyze, configure, verify, and troubleshoot VLANs, RSTP, VTP, and wireless networks. Campus network design and Layer 3 switching concepts are introduced. (4 credits) ITCC 2410 Cisco Exploration 4 Accessing the WAN Prerequisites: ITCC 1401, 1404, and 2408 (or concurrent) This course explains the principles of traffic control lists (ACLs) and provides an overview of the services and protocols at the data link layer for widearea access. Describes user access technologies and devices and discover how to implement and configure Point-to-Point Protocol (PPP), Point-toPoint Protocol over Ethernet (PPPoE), DSL, and Frame Relay. WAN security concepts, tunneling, and VPN basics are introduced. Discuss the special network services required by converged applications and an introduction to quality of service (QoS). (4 credits)

4 Aerospace Academy St. Philip s College (Southwest Campus) Certificate of Completion: Aircraft Turbines Mechanic or Aircraft Structures Mechanic NBISD Course Credit PEIMS # High School Aerospace Year One *College Course College Aircraft Technology AERM Fall Possible course for additional credit AERM Fall AERM Fall Semester AERM Spring AERM Spring AERM Spring POFT Spring AERM Summer Aerospace Year Two Advanced Aircraft Technology AERM Fall AERM Fall AERM Spring AERM Spring AERM Spring AERM Spring Total 6 33 Structures Track or Turbines Track *See Aerospace Academy College Course Descriptions next page

5 Aerospace Academy St. Philip s College (Southwest Campus) Certificate of Completion: Aircraft Turbines Mechanic or Aircraft Structures Mechanic Fall Semester Year 1 (3 (3 /8 / credit 8 credits) AERM 1201 INTRODUCTION TO AVIATION An overview of aviation maintenance including the history of aviation, the mechanic s roles and duties, and nomenclature of aircrafts and safety. (2 credits) AERM 1310 Ground Operations An introductory course in aircraft servicing methods and procedures for fluids (fuels, oil, hydraulic fluid), aircraft movement, securing and operations of aircraft, external power equipment, aircraft cleaning, and corrosion control. Fundamentals of safety will also be addressed. (3 credits) AERM 1254 Aircraft Composites Comprehensive concepts of the inspection and repair of composite, fabric, core, and laminated structural materials including doors, windows, bonded structures, and interior furnishings. Safety procedures to include the handling and storage of composite materials will also be addressed. (2 credits) AERM 1315 AVIATION SCIENCE Fundamentals of mathematics, physics, and drawing as they apply to aircraft principles and operations as required by the Federal Aviation Administration for airframe and power plant mechanics. (3 credits) AERM 1303 SHOP PRACTICES An introduction to the correct use of hand tools and equipment and precision measurement; identification of aircraft hardware and the fabrication of fluid lines and tubing. Also this course will emphasize procedures for testing, heat treating, and inspection of aircraft structures. Fundamentals of safety will also be addressed. (3 credits) Spring Semester Year 1 (4 (4 /9 / credit 9 credits) AERM 1208 Federal Aviation Regulations A course in the use and understanding of the Federal Aviation Administration (FAA) and aircraft manufacturers publications, forms, and records; and the exercise of mechanic privileges within prescribed limitations. (2 credits) AERM 1205 Weight and Balance An introduction to Federal Aviation Administration (FAA) required subjects relating to the weighing of aircraft, the performance of weight and balance calculations, and appropriate maintenance of record entries. (2 credits) POFT 1220 Job Search Skills Skills to seek and obtain employment in business and industry. (2 credits) Summer Semester Year 1 (1 (1 course/4 credit / 4 credits) AERM 2486 Internship Airframe Mechanics & Aircraft Maintenance Technology/Technician A work-based learning experience that enables the student to apply specialized occupational theory, skills, and concepts. A learning plan is developed by the college and the employer. (4 credits) Fall Semester Year 2 (2 (2 /6 / credit 6 credits) AERM 1414 Basic Electricity (4-3-4) A study of aircraft electrical systems and their requirements including use of ammeter, voltmeter, and ohmmeter; series and parallel circuits; inductance and capacitance; magnetism; converting alternating current (AC) to direct (DC); controlling devices; maintenance and servicing of aircraft batteries; and reading and interpreting aircraft electrical diagrams to include solid state devices and logic functions. Fundamentals of safety will also be addressed. (4 credits) Spring Semester Year 2 (2 (2 /6 / credit 6 credits) Choose Structures or Turbines Track AERM 1241 Wood, Fabric and Finishes A study in the use and care of various covering materials, finishes, and structures to include approved methods and safety procedures. (2 credits) AERM 1452 Aircraft Sheet Metal A course in inspection and repair of sheet metal structures to include forming, lay out, and bending of sheet metal, identification, selection, and installation of rivets and fasteners. Fundamentals of safety procedures will also be addressed. (4 credits) or AERM 1351 Aircraft Turbine Engine Theory General principles of theory, history, and servicing of turbine engines to include lubrication, instrumentation, auxiliary power units, and exhaust systems. Fundamentals of safety procedures are also addressed. (3 credits) AERM 2351 Aircraft Turbine Engine Overhaul Topics address inspection, disassembly, re-assembly, and replacement of gas turbine engines, sections, and components as well as operational troubleshooting and analysis. (3 credits)

6 ATMA (Advanced Technology and Manufacturing Academy) Central Texas Technology Center Certificate of Completion: Precision Metal Worker, Production Tool Operator/Maintenance Assistant NBISD Course Credit PEIMS # High School ATMA Year One *College Course College Advanced Precision Metal Manufacturing TECM Fall ATMA Year Two MCHN Fall MCHN Fall Semester MCHN Spring MCHN Spring MCHN Summer Manufacturing Engineering INMT Fall Total ELPT Fall QCTC Fall MCHN Spring ENTC Spring *See ATMA College Course Descriptions next page

7 New Braunfels ISD Career & Technical Education Pathways ATMA (Advanced Technology and Manufacturing Academy) Central Texas Technology Center Certificate of Completion: Precision Metal Worker, Production Tool Operator/Maintenance Assistant Fall Fall Semester Semester Year Year 1 1 (3 /8 credit (3 /8 credit TECM 1303 Technical Calculations Exploration of a variety of methods used in manufacturing. Theory and application of processes including but not limited to metal forming, welding, machining, heat treating, plating, assembly procedures, and process control considerations, casting and injection molding. (3 credits) MCHN 1320 Precision Tools and Measurements An introduction to the modern science of dimensional metrology. Emphasis on the identification, selection, and application of various types of precision instruments associated with the machining trade. Practice of basic layout and piece part measurement while using standard measuring tools. (3 credits) MCHN 1270 MSSC Manufacturing Skill Standards Council Certified Production Technician Safety and Quality Modules. (2 credits) Spring Semester Year 1 (2 / 7 credit MCHN 1302 Print Reading for Machining Trade II A review of applied math models and a study of different blueprints, with emphasis on machine blueprints and the application of each. (3 credits) MCHN 1438 Basic Machine Shop An introduction course that assists the student in understanding the machinist occupation in industry. The student begins by using basic machine tools such as the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools are included. Emphasis is placed on shop safety, housekeeping, and preventative maintenance. (4 credits) Summer Year One (1 Course / 2 Credit Hours) MCHN 2486 Internship Machine Tool Technology/Machinist Practical, general workplace training supported by an individualized learning plan developed by the employer, college, and student. (2 credits) Fall Semester Year 2 (3 / 8 credit INMT 2303 Pumps, Compressors, and Mechanical Drives A study of the theory and operations of various types of pumps and compressors. Topics include mechanical power transmission systems including gears, v-belts, and chain drives. (3 credits) ELPT 1319 Fundamentals of Electricity I Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current. (3 credits) QCTC 1243 Quality Assurance Principles and application designed to introduce quality assurance. (2 credits) Spring Semester Semester Year Year 2 2 Spring (2 / 7 credit (2 / 7 credit MCHN 1426 Introduction to Computer Aided Manufacturing (CAM) A study of Computer Assisted Manufacturing (CAM) systems. Software is used to develop applications for manufacturing. Emphasis on tool geometry, tool selection, and the tool library. (4 credits) ENTC 1305 Robotics An introduction to Robots/Automation. Includes history, terminology, classification of robots, basic components, control systems, alternating current and hydraulic servomechanisms, programming, sensors, types of drive, end of arm tooling, end effectors, and safety and design procedures. (3 credits)

8 Heavy Equipment Academy St. Philip s College (Southwest Campus) NBISD Course Credit PEIMS # High School Heavy Equipment Academy Year One *College Course College Energy, Power, and Transportation Systems DEMR Fall Automotive Technology DEMR Fall Heavy Equipment Academy Year Two Semester DEMR Spring DEMR Spring DEMR Summer Advanced Automotive Technology DEMR Fall Transportation Systems DEMR Fall DEMR Spring DEMR Spring Total *See Heavy Equipment College Course Descriptions next page

9 New Braunfels ISD Career & Technical Education Pathways Heavy Equipment Academy St. Philip s College (Southwest Campus) Fall Fall Semester Semester Year Year 1 1 (2 (2 // 8 8 credit credit DEMR 1406 Diesel Engine I An introduction to the basic principles of diesel engines and systems. (4 credits) DEMR 1416 Basic Hydraulics Fundamentals of hydraulics including components and related systems. (4 credits) Spring Semester Year 1 (2 / 7 credit DEMR 1405 Basic Electrical Systems An introduction to the basic principles of electrical systems for diesel powered equipment with emphasis on starters, alternators, batteries, and regulators. (4 credits) DEMR 1329 Preventive Maintenance A study of shop safety procedures, rules, and practices, also; basic shop tool and test equipment, identification, and proper usage, a short introduction to servicing heavy-duty trucks and the career field. (3 credits) Summer Semester Year 1 (1 course /2 credit DEMR 2266 Internship Practical general training and experiences in the workplace. The College, with the employer, develops and documents an individualized plan for the student. The plan relates the workplace training and experiences to the students general and technical course of study. (2 credits) Fall Semester Year 2 (2 / 8 credit DEMR 1423 Heating, Ventilation, and Air Conditioning Introduction to heating, ventilation, and air conditioning theory, testing, and repair. Emphasis on refrigerant reclamation, safety procedures, specialized tools, and repairs. (4 credits) DEMR 2435 Advanced Hydraulics Advanced study of hydraulic systems and components including diagnostics and testing of hydraulic systems. (4 credits) Spring Semester Year 2 (2 / 8 credit DEMR 2434 Advanced Diesel Tune-Up and Troubleshooting Advanced concepts and skills required for tune-up and troubleshooting procedures of diesel engines. Emphasis on the science of diagnostics with a common sense approach. The student will analyze engine malfunctions; determine corrective repair; perform engine repairs; and adjust engine tune-up according to engine manual. The course will emphasize Caterpillar, Cummins, Detroit, and Mack electronically controlled engine systems. (4 credits) DEMR 2432 Electronic Controls Advanced skills in diagnostic and programming techniques of electronic control systems. (4 credits)