Description: Objective: Upon completing this course, the learner will be able to meet these overall objectives:

Size: px

Start display at page:

Download "Description: Objective: Upon completing this course, the learner will be able to meet these overall objectives:"

Alice Wells
8 years ago
Views:

Course: Building Cisco Service Provider Next-Generation Networks, Part 2 Duration: 5 Day Hands-On Lab & Lecture Course Price: $ 3,750.

1 Course: Building Cisco Service Provider Next-Generation Networks, Part 2 Duration: 5 Day Hands-On Lab & Lecture Course Price: $ 3, Learning Credits: 38 Description: The Building Cisco Service Provider Next-Generation Networks, Part 2 (SPNGN2) v1.0 is a course that provides network engineers and technicians with the knowledge and skills that are necessary to implement and support a provider network (P-network). The course focuses on using Cisco switches and routers that are connected in LANs and WANs and that are typically found in the P-network. Upon completing this course, learners will be able to configure, verify, and troubleshoot the various Cisco networking devices. The course also includes classroom activities with remote labs that are useful to gain practical skills on deploying Cisco IOS/IOS XE Software and Cisco IOS XR Software features to operate and support the P-network. Objective: Upon completing this course, the learner will be able to meet these overall objectives: Describe the Cisco IP Next-Generation Network (Cisco IP NGN) architecture Expand a small, switched LAN to a medium-sized LAN with multiple switches, supporting VLANs, trunking, and Spanning Tree Protocol Describe routing concepts as they apply to a P-network and discuss considerations when implementing routing on the network Implement internal and external routing protocols: OSPF, IS-IS, and BGP Describe and implement basic MPLS Determine how to apply ACLs that are based on network requirements, and implement ACLs on a P-network Describe when to use NAT and implement NAT on Cisco routers Describe basic IPv6 concepts and use different configuration scenarios to implement IPv6 Describe the fundamentals of Cisco IOS XR technology SPNGN2 v1.0 Page 1/6

0 is a course that provides network engineers and technicians with the knowledge and skills that are necessary to implement and support a provider network (P-network).

2 Prerequisites: The knowledge and skills that a learner must have before attending this course are as follows: Basic computer literacy Basic Microsoft Windows navigation skills Basic Internet usage skills Basic knowledge of networking concepts Basic knowledge of Cisco IOS/IOS XE and Cisco IOS XR software configuration Skills and knowledge that are equivalent to those learned in the Building Cisco Service Provider Next-Generation Networks, Part 1 (SPNGN1) course Who Should Attend: The primary audience for this course is as follows: This course comprises network administrators, network engineers, network managers and systems engineers working in the service provider environment. The secondary audience for this course is as follows: This course is intended for network designers and project managers. The tertiary audience for this course is as follows: This course is intended for program managers. The secondary audience for this course is as follows: The course is also recommended to all individuals preparing for CCNA Service Provider certification. SPNGN2 v1.0 Page 2/6

Cisco Service Provider Next-Generation Networks, Part 1 (SPNGN1) course Who Should Attend: The primary audience for this course is as follows: This course comprises network administrators, network

3 Outline: Module 1: Service Provider Network Construction Lesson 1: Introduction to Service Providers Interconnecting ISP Networks Global IP Address Space Management Global Routing Lesson 2: Cisco IP NGN Architecture Cisco IP NGN Architecture Components of a Cisco IP NGN Infrastructure Layer Cisco IP NGN of the Future Lesson 3: Cisco Hardware Platform Placement Cisco Routers, Switches, and Other Devices Cisco Routers in the Core Network Cisco Routers and Switches in the Edge and Aggregation Network Cisco Routers in the Access Network Cisco Switches in the Access Network Module 2: Advanced LAN Switching Lesson 1: Implementing VLANs and Trunks Introduction to VLANs Trunking QinQ Lesson 2: Spanning Tree Protocol Enhancements PVSTP RSTP MSTP Spanning Tree Options REP Lesson 3: Routing Between VLANs Concept of Inter-VLAN Routing Configuring a Router for Inter-VLAN Routing Configuring a Layer 3 Switch for Inter-VLAN Routing Lesson 4: First Hop Redundancy Protocols Gateway Redundancy Problem Hot Standby Router Protocol Virtual Router Redundancy Protocol Gateway Load Balancing Protocol SPNGN2 v1.0 Page 3/6

Devices Cisco Routers in the Core Network Cisco Routers and Switches in the Edge and Aggregation Network Cisco Routers in the Access Network Cisco Switches in the Access Network Module 2: Advanced

4 Module 3: Internal Service Provider Traffic Forwarding Lesson 1: Link-State Routing Protocols Service Provider IP and MPLS Core Network Link-State Routing Protocol Basics Link-State Database and SPF Calculations Lesson 2: Implementing OSPF OSPF Basics Adding Interfaces to OSPF OSPF Load Balancing OSPF Authentication Lesson 3: Implementing IS-IS IS-IS Basics Adding Interfaces to IS-IS IS-IS Load Balancing IS-IS Authentication Lesson 4: Implementing Route Redistribution Route Redistribution Basics Route Redistribution into OSPF Route Redistribution into IS-IS Lesson 5: MPLS Basics MPLS Introduction Label Distribution Protocol MPLS Configuration Module 4: External Service Provider Routing Lesson 1: Introducing BGP Introduction to the Interdomain Routing AS Types and Redundancy BGP Characteristics and Limitations Address Families Lesson 2: Understanding BGP Path Attributes BGP Path Attributes Lesson Attribute 3: Establishing Examples BGP Sessions BGP Peering External and Internal Border Gateway Protocol Authentication Lesson 4: Processing BGP Routes Network Layer Reachability Information Best Route Selection Criteria Route Propagation Advertising Networks SPNGN2 v1.0 Page 4/6

Balancing IS-IS Authentication Lesson 4: Implementing Route Redistribution Route Redistribution Basics Route Redistribution into OSPF Route Redistribution into IS-IS Lesson 5: MPLS Basics MPLS

5 Lesson 5: Configuring Basic BGP Configuring the BGP Process Configuring Routing Parameters Module 5: ACLs and IP Address Translation Lesson 1: Applying Access Control Lists Access Control Lists Standard ACLs Extended ACLs IPv6 ACLs Service Provider Edge Filtering Lesson 2: Transitioning to IPv6 Transition Issues Carrier-Grade NAT NAT64 Dual-Stack IPv6-in-IPv4 Tunneling Module 6: Cisco IOS XE and Cisco IOS XR Software Lab Outline Lesson 1: Describing Cisco IOS XR Software Architecture and Features Cisco IOS XR Software Architecture Cisco IOS XR Software High-Availability Features Cisco IOS XR Software Release Cycle Lesson 2: Explaining Software Maintenance Operations on Cisco IOS XR and Cisco IOS XE Cisco IOS XR Software Packages Cisco IOS XR Software Upgrades Installing Cisco IOS XR from the Beginning Cisco IOS XR Firmware Updates Cisco IOS XE Software Packages Lesson 3: Explaining Configuration Management with Cisco IOS XR Software Committing Configuration Configuration Rollback Points Lab 2-1: Configure Advanced Switching Lab 2-2: Configure Inter-VLAN Routing and Gateway Redundancy Lab 3-1: Implement OSPF Lab 3-2: Implement IS-IS Lab 4-1: Configure Basic BGP SPNGN2 v1.0 Page 5/6

XE and Cisco IOS XR Software Lab Outline Lesson 1: Describing Cisco IOS XR Software Architecture and Features Cisco IOS XR Software Architecture Cisco IOS XR Software High-Availability Features Cisco

6 Powered by TCPDF ( Building Cisco Service Provider Next-Generation Networks, Part 2 Lab 5-1: Implement ACLs Lab 6-1: Manage Cisco IOS XR Software Package SPNGN2 v1.0 Page 6/6

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs)

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs) 2-Interconnecting Cisco Networking Devices Part 2 (40 Hs) 1-Interconnecting