DTR 1002S PRO DIGITAL TERRESTRIAL RECEIVER. User s Manual

Transcription

1 DTR 1002S PRO DIGITAL TERRESTRIAL RECEIVER User s Manual

2 CONTENTS. ERROR! MARCADOR NO DEFINIDO. 1. IMPORTANT SAFETY INSTRUCTIONS CONTENTS AND EQUIPMENT REMOTE CONTROL CONNECTIONS AND PREPARATION BASIC FUNCTIONS ENTER INTO SYSTEM AND POWER ON-OFF TV/RADIO PROGRAMS SWITCH STATION SWITCH DISPLAY INFORMATION OF PROGRAMS PROGRAM RETURN AUDIO LANGUAGE SWITCH AND L/R CHANNEL SWITCH ELECTRONIC PROGRAMS GUIDE(EPG) TELETEXT SUBTITLE DIGITAL TV INSTALLATION Manual Search Auto Search CHANNEL MANAGER Channel Organizer Channel Sorting Channel Grouping Edit Channel Delete All CONFIGURATION OSD TV Display Mode Aspect Ratio Video Output Brightness Contrast HUE Saturation System Setup Time Wakeup Timer Parental Lock SOFTWARE UPGRADE VERSION FACTORY DEFAULT GAMES TROUBLESHOOTING GLOSARY OF TERMS CARACTERISTIC

3 1. IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY INSERTED. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus. 1. Read Instructions-All the safety and operating instructions should be read before the appliance is - 2 -

4 operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Water and Moisture-The appliance should not be used near water. 6. Ventilation-The appliance should be well situated that its location or position does not interfere with its proper ventilation. 7. Heat-The appliance should be situated away from heat sources such as radiators, heat registers, stoves that produce heat. 8. Power Sources-The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 9. Grounding or Polarization-Precautions should be taken. 10. Power -Cord Protection -Power supply cord should be routed so they are not likely to be walked on or pinched by item placed upon or against them, pay plugs,and the point where they exit from the appliance. 11. Cleaning -The appliance should be cleaned only by ways recommended by the manufacturer. 12. Power Plug-Where the MAINS plug or an appliance coupler is used ad the disconnect device, the disconnect device shall remain readily operable. 13. Power Lines -An outdoor antenna should be located away from power lines. 14. Outdoor Antenna Grounding-If an outside is connected to the receiver be sure the antenna system is grounded so as to provide protection against voltage surges and to build up static charges. 15. Non-use Periods -The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 16. Object and Liquid Entry -Care should be taken so that objects do not fall and liquids are not spilled,into the enclosure through openings. The apparatus shall not be expose to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 17. Conditions Requiring Service -The Appliance should be serviced by qualified service personnel when: The power-supply cord or the plug has been into the appliance. Objects have fallen or liquid has been spilled into the appliance. The appliance has been expose rain. The appliance does not appear to operate normally or exhibit a marked change in performance

5 2. CONTENTS AND EQUIPMENT Package Contents DTR 1002S PRO Operation manual X1 Remote control X1 2 batteries 1.5V "AAA" 1. DVB Product DTR 1002S PRO 2. Remote control DVB RECEIVER ( include 2 batteries Remote control x 1) 3. 2 batteries,1.5v,"aaa" type 4. Operation manual Using the remote control Unless stated otherwise, the remote control can operate all features of the DVB Product. Always point the remote control directly at the remote sensor on the front of the DVB Product, not the TV. Before you begin Refer to the manuals of your TV, stereo, or other equipment as necessary.note the style of jacks and connectors on the equipment.determine how to choose different audio and video in channels on your other equipment so you can and hear the DVB Product working on the TV, stereo,etc. You only need two audio connection and one video connection between the DVB Product and your TV.So you might not use all the jacks on the DVB Product. Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet

6 Front Panel Real Panel Decoder 1. ANT IN Income marks them of antenna. 2. Exited LOOP OUT passing marks them of antenna towards the TV. 3. SPDIF Digital audio optical output. 4. Taken VCR SCART audio/video SCART for the videoregistrazione. 5. Exited TV SCART audio/video SCART for the connection to screen TV. 6. CABLE FEEDING Cable integrated for the connection to taken of net electrical worker 230 Volt AC, 50Hz. 7. Taken RS232 given serial RS232 (classified to the technical attendance). 8. Power Buttton ON/OFF - 5 -

7 2.1 REMOTE CONTROL 1. POWER Switches the DVB -T between operation and standby mode. 2. MUTE Enables/disables the audio (Numeric Keys) Selects the TV or Radio service channels and individual menu option 4. FAV To shows favorite channels list. 5. CIRCULATING 6. DTV/VCR. 7. TV FORMAT 8. INFO Displays the program information box on the screen. 9. MENU Displays the Menu on screen or returns to previous menu from submenu. 10. EXIT Returns to the previous menu and the screen. 11. EPG Displays the EPG (Electronic Programme Guide) on screen only when available. 12. VOL+/- Changes the volume level in viewing mode and setting in menu mode. 13. OK Confirms the choices and selection with highlight menu item. 14. CH+/- Changes channels in viewing mode and moves cursor up or down in menu mode. 15. LANGUAGE 16. PAUSE To still picture in current channel. 17. AUDIO Set the output direction for speaker. 18. TV/RADIO Select the TV/Radio mode. 19. SUBTITLE 20.TELETEXT - 6 -

8 2.2 CONECTIONS - 7 -

9 Connecting the power cable Insert the plug of the power cable into the power socket. Caution: The unit is completely disconnected from the mains supply if the power plug is pulled out of the socket or with power button on OFF. Inserting batteries into the remote control To open battery compartment, press catch and remove cover. Observe correct polarity when inserting the batteries (AAA, 2 1.5V) Note: If the unit no longer responds to the remote control, it is possible that the batteries are used up. Make sure to remove consumed batteries. Note on the environment: Batteries must not be disposed of in domestic waste. Batteries must be handed in to a used-battery collection point

10 3. BASIC FUNCTIONS Program List Program Search Parental Control System Setting Game Accessory Personal Style TV Program List Music Program List Sort Automatic Search Manual Search Channel Lock Parental Setting Change PIN TV Standard Display Type Video Output Antenna Power Regional Setting Language Time Setting System Schedule Mine Tetris Gomoku Calendar System Information Factory Default System update Menu Color Transparency Level Border Pattern Entry Animation By Name By Service ID Channel No. YES NO PAL NTSC AUTO 4:3 PS 4:3 LB 16:9 CVBS+S-Video CVBS+RGB OFF ON NO YES - 9 -

11 3.1 Enter into system and power on-off It will continue to play the latest program before previous power off if the database having any TV or RADIO program. 1. Power on When it is in standby mode, press power to power on. 2. Power off When it is running, press power will enter into standby mode. 3.2 TV/RADIO programs switch Press TV/RADIO to switch the programs when it is in full screen. 3.3 Station switch 1. Press OK to switch to the quick selet program list, press VOL+/VOL- to select different program class; press CH+/CH- to select program. Press OK to confirm program selection, press EXIT return to hide menu 1. If there are some favorite programs that been set up, just press FAV key to enter into the favorite program list: Press CH+/CH- to select favorite program, Press OK to confirm the selection,press EXIT to return to hide menu

12 3.4 Display information of programs Press key INFO twice to show the information of current programs when it is in normal palying state. 3.5 Program return Press RECALL under state of full-screen to return to the previous program palyed. 3.6 Audio and Language switch 1.Press Language/Audio key to switch the language of sound of current programs and switch among stereo - left - right (stereo-left channel-right channel). 2.Press VOL+/VOL- to switch among stereo - left - right (stereo- left channel- right channel), press CH+/CH- to switch the language of sound. 3.Press OK key to confirm the selection and return to full-screen play mode

13 3.7 Electronic programs guide (EPG) 1. You can press key EPG on the remote control to enter into the EPG page to know more about the programs to be played. As shown in the figure below: (3).Tab 3 shows particular date list; (4).Tab 4 shows program list, press CH+/CH- to switch between programs; (5).Tab 5 shows the time range and program information, press F.R & F.F circularly to choose to browse the time range and program information on basis of days of every week; (6). Tab 6 shows the detailed program information in Tab 5; (7). Tab 7 shows hint information for keys, corresponding to the three colors on the remote controller: Green button, Yellow button, Blue button; (8).Press VOL+/VOL- to switch between Tab 4 and Tab 5; 2. Press Green key to enter into Weekly Mode to display the programs and program information in different time ranges of the currenty program list within one week 3. (1).Press F.R & F.F key to switch between Thursday ---wednesday in Tab 3; (2).Press CH+/CH- key to move upward and downward to switch between the different programs in Tab 5; (3).Press VOL+/VOL- key to choose to view the program information in different time ranges in Tab When the cursor stops on Tab 5, press the yellow key to choose the detailed information corresponding to the current program 4. When the cursor stops in Tab 5, press the blue key to enter Wakeup Timer menu to book programs 5. Press EXIT to exit from EPG

14 3.8 Teletext 1. If you want to watch teletext, please press Teletext on the remote control to enter into teletext page. 2. Input three digits to go to corresponding page you want; 4. Press CH+ to go to the previous page, while press CH- to go to the next page; 5. Press VOL- go to back 100pages, while press VOL+ go to previous 100 pages. 6. Press EXIT to exit from teletext. 3.9 Subtitle 1. Subtitle is defaulted to be off; to see the caption information, press the SUBTITLE key on the remote control to enter the Subtitle menu of the current programs 2. Press VOL+/VOL- key to choose whether to open Subtitle

15 4. Digital TV In the main menu of the system, under Digital TV, there are such as options as Channel manager, installation, configuration, software upgrade, factory default, version press MENU key firstly to enter the main menu In Main Menu, press CH+/CH- key to choose Digital TV option and then Press OK key once to enter Digital TV menu 4.1 Installation There are two kinds of Installation mode as follow: 1. Manual Search 2. Auto Search You can enter into parameter installation page via input password digitals(default password is 0000 ), As shown in the figure below: 3. Area Search

16 4.1.1 Manual Search If you understand much about digital TV and know the frequency of the program or if you want to scan the program at any frequency required, you can select manual scaning, whitch can save your much time. 1. You can move the cursor to Manual search via press CH+/CH- key under installation menu, then press OK to enter into Manual searching page, As shown in the figure below: Auto Search You can search the programs of any channel. 1. You can move the cursor to Auto search via press CH+/CH- key under installation menu, then press OK to enter into Auto searching page, As shown in the figure below: Areal Search 4.2 Channel Manager System offer an efficient function of channel management such as channel organizer, channel sorting,channel grouping, delete all Channel Organizer 1. You can enter the page as shown in the figure below via MENU->Digital TV-> Channel Manager -> Channel Organizer 2. it will pop up and dialogue box prompting that Channel not available when there are no channels in database to

17 enter into, and it will not enter into channel organizer page. 3. Channel Organizer menu includes: Favorite Channel, Delete Channel, Mov Channel, Lock Channel. Press UP/DOWN key to choose the line where Favorite Channel is, then press the 4-color key on the remote controller: press the red key to set and cancel Favorite Channel, the green key to set or cancel Delete Channel, the yellow 3D key to set or cancel Mov Channel, the blue key to set or cancel Lock Channel ; 4. To rename channel, press CH+/CH- key to choose the line where the channel to be renamed is, press VOL+/VOL- key to enter the page to rename the channel, as shown below: 5. Press EXIT key to exit Channel Organizer page Channel Sorting The channels shall be listed according to certain sequence so that the user can easily find them. 1. you can enter the page As shown in the figure below via MENU->Digita TV-> Channel Manager -> Channel Sorting : 2. It will pop up and dialogue box prompt that Channel not available when there are no programs in database to enter into, and it will not enter into channel sorting page. 3. Before sorting, the type of sorting shall be set, including the following items: (1).First Option: choose the programs to be sorted via the selection area; (2).Second Option: Press FTA(free of charge), Scramble(encrypted), ALL Freehand Encryted Channels; (3).Third Option: According to alphabetic order A-Z, or Z-A,LCN+,LCN-,ALL 4.Press CH+/CH- key choose Type, Press VOL+/VOL- key to set Sorting Parameters; 5. After sorting is setted, to realize channel sorting, press OK key, 6.Press EXIT key to exit Channel Sorting page Channel Grouping Group channels according to Movies, Sport, Music, Kids, Fashion etc

18 1. You can enter the page As shown in the figure below via MENU->Digita TV-> Channel Manager -> Channel Grouping : 2. It will pop up and dialogue box prompting that Channel not available when there are no programs in database to enter into, and it will not enter into channel grouping page. 3. Press CH+/CH- key to choose the line where the channel to be grouped is in, then press the number keys 1-8 on the remote controller to set different channel grouping. 4. After channel is edited, when EXIT key is pressed to exit the menu Edit Channel Have such operations as Add, Delete and Rename to channels. 1. You can enter the page as shown in the figure below via MENU->Digita TV-> Channel Manager -> Edit Channel : 2. It will pop up and dialogue box prompting that No Carriers when there are no programs in database to enter into, and it will not enter into ADD-Edit Channel page. 3.Press the red key of the remote controller to enter Add Channel menu, as shown in Below Under Add Channel menu, there are 6 parameters for adding one channel as follows: (1).Area Name: For Area Name, press the VOL+ key of the remote controller to enter the Area Name list on

19 the right, then press CH+/CH- key to choose area name, press OK key to confirm; (2).Carrier: Press VOL+/VOL- key to choose; (3).Channel Name: Press VOL+/VOL- key to enter Rename Channel page as shown (4).Audio PID, Video PID, PCR PID, Press 0-9 number key to revise values; (5).Press OK key to confirm the adding, the system will hint with successfully Updated and return to Edit Channel menu; 4.Press the yellow key of the remote controller to enter Rename Channel menu, as shown in below The operation for this menu is as that of for Add Channel page Delete All 1. Under Channel Manager menu, press CH+/CH- key to choose Delete All option, press OK key again, then the system will hint with the dialogue box of inputting password which is defaulted as To delete all TV channels, press CH+/CH- key to move the cursor to ALL TV Channels option, press OK key, then the system will hint with Delete all TV Channels? 3.To delete all RADIO channel, press CH+/CH- key move the cursor to ALL Radio Channels option, press OK key, then the system will hint with Delete all Radio Channels? dialogue box, press VOL+/VOL- key to choose Yes or No, press OK key to confirm;

20 4.3 Configuration Configuration provides individualized system setup function, you can configure the system according to your own hobby and demand. You can enter Configuration menu via the menu(menu->digita TV->Configuration), as shown in below OSD Via OSD option setup, you can set the user interface display mode according to your own demand. Via the menu ( MENU->Digita TV->Configuration -> OSD), you can enter OSD menu, as shown in below All options are listed on the left of the OSD menu, when the cursor moves on the option in OSD menu, the values corresponding to this option on the right of the menu, press CH+/CH- key to move upward and downward to choose the options in OSD menu. There are following options in OSD menu: (1).OSD Option sets system color; (2).Time on OSD Option sets whether to display system time in full-screen play channel (3)OSD Timeout Option, move the cursor to OSD Timeout Option, press VOL+/VOL- key to choose among 1-6s, the default is 3s; (4). OSD Trans option set menu color, press VOL+/VOL- key to adjust between 0%-60%. (5) OSD Language option: The system has the user interface supporting a couple of languages, you can set language via OSD Language option: (1)Move the cursor onto OSD Language option, Press VOL+ key to enter OSD Language List as shown in below (6).1st Audio Language option: Press VOL+ key to enter the currently supported Audio Language list, in the Audio Languagelist, press CH+/CH- key to choose language, press OK key to confirm; Press OK key to confirm the editing action in OSDmenu

21 4.3.2 TV TV setup provides convenient TV input mode, you can via menu ( MENU->Digita TV->Configuration -> TV) enter TV set, as shown in below All options are listed on the left of the menu, when the cursor moves to the option on the left of the TV menu, the values corresponding to this option can be displayed on the right of the menu Display Mode TV mode can be changed the mode of the ouput video, you can adjust TV mode according to the actual situation of you receiving equipment. (1).Move the cursor to Display Mode option, press VOL+/VOL- key to choose circularly among the options, and the TV mode set can be effective immediately; (2). TV Mode can be set as Auto, PAL, NTSC; (3).Default TV Mode: PAL; (4).Press OK key to save the setting Aspect Ratio Video output mode can be changed the mode of video output, you can adjust TV mode according to the actual situation of you receiving equipment. (1)Move the cursor to Aspect Ratio option, press VOL+/VOL- key to move circularly and choose options; (2).Aspect Ratio can be set as 16: 9, 4: 3PanScan, 4: 3LetterBox; (3).Default Aspect Ratio 4: 3LB; (4).Press OK key to save the setting Video Output Video Output mode can be changed the mode of video output, you can adjust TV mode according to the actual situation of you receiving equipment. Move the cursor to Video Output option, Press VOL+/VOL- key to move circularly and choose options and the setting can be effective. Video Output mode can be set as CVBS, RGB; Default: CVBS; Press OK key to save set

22 Brightness If the brightness is not proper during watching, you can adjust the current brightness to be a proper one. 1. Move the cursor to Brightness option, press VOL+ key to move the cursor into the Properties list on the right, as shown in below 2. Press CH+/CH- key to move upward and downward the cursor to choose, press OK key to confirm; in this moment, move the cursor onto the options on the left, and then values will become the ones you want. 3. Brightness can be set as: 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% or100%; 4. Default:80%; 5. Press OK key to save the setting Contrast You can set system contrast via Contrast option. 1. Move the cursor to Contrast option, press VOL+ key to move the cursor into the Properties list on the right 2. Press CH+/CH- key to move upward and downward the cursor to choose, press ENTER key to confirm, in this moment, move the cursor onto the options on the left, and then values will become the ones you want. 3. Contrast can be set as: 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% or 100%; 4. Default:60%; Press OK key to save the setting HUE Adjust the system hue. 1. move the cursor to HUE option Press VOL+ key to move the cursor into the Properties list on the right, as shown in below 2. Press CH+/CH- key to move upward and downward the cursor to choose, press ENTER key to confirm, in this moment, move the cursor onto the options on the left, and then values will become the ones you want. 3. Hue can be set as: -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5 or 6; 4. Default: 0; Press OK key to save set

23 Saturation Adjust system saturation. 1. Move the cursor to Saturation option, Press VOL+ key to move the cursor into the Properties list on the right, as shown in below 2. Press CH+/CH- key to move upward and downward the cursor to choose and press OK key to confirm, in this moment, move the cursor onto the options on the left, and then values will become the ones you want. 3. Saturation can be set as: 0-12; 4. Default: 0; 5. Press OK key to save set, the system will hint with Update succeeds System Setup System Setup menu can provide convenient system setup, you can via menu ( MENU->Digital TV->Configuration -> System Setup) enter System Setup menu, as shown in below In System Setup menu, (1). Press CH+/CH- key to move upward and downward the cursor to choose option; (2). When the cursor stays on the option: Press VOL+/VOL- key to choose circularly among the values in this option, press OK key to confirm; Items Purposes Options EQ setup To set output sound effect. Standard, Classic, Rock, Jazz, POP; default: Standard Surround To set stage effect OFF, Concert, Church, Passive, Live; default: concert Area To set scanning area and choose, choose area to download preset channel settings. List of countrys

24 4.3.4 Time Via menu ( MENU->Digita TV->Configuration -> Time), entertimeset, as shown in below: In Time menu, there are two time modes, one is Auto setting, the other is Manual setting, Press VOL+/VOL- key to choose time mode. 1. The system defaults the setting as Automatic, press CH+/CH- key to move only between Timer Mode, GMT Offset and Summer Time. 2. When the setting is Manual, press CH+/CH- key to to move only between Timer Mode, Date and Time Wakeup Timer If you want to set channel playing at certain time or giving some hint information such as Birthday.You can set via Wakeup Timer menu, as shown in below: Parental Lock You can revise system Password, you can via menu ( MENU->Digita TV->Configuration -> Parental Lock)to enter Parental Lock menu, as shown in below: 1. Press the0-9number key on the remote control to input old Password, the system defaults Password as

25 4.4 Software Upgrade 4.5 Version Via menu ( MENU->Digita TV-> Version), enter the page as shown in below: You can be provided with system software information, including H/W Version, S/W Version, Tuner Type, Date, Time, Press EXIT key to return previous menu. 4.6 Factory Default Via menu (Menu- Digital TV Factory Default ), default password is 0000 and Games If you want to have a rest or to relieve yourself after hard working, you can play some games attached in the system

26 6. Troubleshooting There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it,please contact the dealer. Don't open the receiver cover.it may cause a dangerous situation. The display on front panel does not light up Check that the power cord is plugged into the wall outlet. Check whether Power Switch is on. No picture Make sure that the product is in Operation Mode. Make sure that the AV Cable is correctly connected to the TV AV Channel Make sure the TV is in AV mode,for this Set Top Box uses AV output. Make sure that antenna cable is correctly connected to the DVB Product. Check the brightness level of TV. Check the channel that is on air. No or bad signal message appears Check other device connected between antenna and the receiver,or adjust the antenna position Poor Picture & sound quality Install antenna where there is not obstacle ahead. Make sure to avoid putting mobile phone or microwave oven around the DVB Product. Use 75Ω coaxial cable to connecting TV and antenna. The DVB is a Standard Definition Receiver,so when viewing High Definition channels on it may cause poor image and sound No or poor sound Check the volume level of the TV. Check the Mute status of the TV and product. Press the Audio button to change the Sound Track type. Remote control does operate To manipulate the equipment with the remote control,the control's emitting part should be directly pointing towards the receiving part (IR Sensor) of receiver. Check the battery of Remote control. NOTE: If the problem can not be solved by going through this Trouble Shooting Guide please contact Our Customer Care Centre for additional help

27 7. GLOSSARY OF TERMS EPG Electronic Program Guide. A software that viewers to navigate easily among the large number of channels provided by digital technology, in order to select the service the desire. FTA Free To Air GMT Greenwich Mean Time. (Australia time is GMT +10:00) PIN Number Personal ldentification Number. A four-digit code that is used for locking/unlocking, e.g with the parental control feature. OSD On Screen Display Rs232 Serial data port For use pc to upgrade software. STB Set Top Box VBI Vertical Blanking Interval 26

28 8. CARACTERISTIC Terrestrial Tuner/Demodulator System Input Frequency Standard Channel Bandwidth OFDM Spectrum Modulation Mode Guard Interval Modes FEC Modes Rate CPU Transport Flash Memory SDRAM VHF:174MHz to 230MHz UHF:470 MHz to 862MHz DVB-T (ETSI ) 6MHz, 7MHz, 8MHz 2k/8k-carrier hierarchical QPSK, 16QAM, 64QAM 1/32, 1/16, 1/8, active symbol duration 1/4, 1/2 3/4,, 2/3, 5/6, 7/ 8 SunPlus 1002 AT DVB Demultiplexer 8MB 4X16M Video Standard MPEG-1 ISO/IEC and Field/Frame Rate Output mode supported Aspect Ratio MPEG-2 MP@ML 50/25Hz 720x576i 4:3, 16:9 with letter box and Full Screen supported Audio Standard MPEG-1 ISO/IEC layers 1 and 2 Sampling Frequency Digital Audio Out Format MPEG-2 ISO/IEC Dolby Digital AC-3 32, 44., 48kHz IEC-60958/IEC Rear panel interface RF input / Loop through TWO Scart Outputs Digital Audio SPDIF Power on/off Button IEC Type 75 Ohm TV/VCR Coaxial Manual switch User Interface Front Panel Standby LED, Power LED Software upgrade Power Environmental Condition Main input voltage Operating Frequency Power consumption Firmware Upgrade over RS232C 220V/240VAC 50/60Hz Normal operation 10W Standby mode 5W Max. 13W Operating Temperature 0~40 Dimension(WxDxH) Weight 260X149.5X48(mm) 0.91kg 27