Home address: 357. sok. 3/40 Seğmen sit. Çiğdem mah. Karakusunlar Çankaya ANKARA TURKEY

Transcription

1 UNIVERSITY OF GAZİ TECHNICAL EDUCATION FACULTY ELECTRICAL EDUCATION DEPARTMENT Head of Lighting and Installation Education Sub Department Teknikokullar ANKARA TURKEY CV Assoc. Prof. Dr. Osman Gürdal Work address: Gazi Üniversitesi Teknik Eğitim Fakültesi Elektrik Eğitimi Bölümü Teknikokullar ANKARA TURKEY Home address: 357. sok. 3/40 Seğmen sit. Çiğdem mah. Karakusunlar Çankaya ANKARA TURKEY Tel: +90 (0) Mobile: +90 (0) Home: +90 (0) ogurdal Name and Surname Osman Gürdal Profession Assoc. Prof. Dr. in Electrical Education Department, Technical Education Faculty, University of Gazi Nationality Turkish Date of Birth January 5, 1963 Marital Status Married, with 2 children Present Position Head of Lighting and Installation Education Sub Department. Senior Lecturer Teaching Fundamentals of Electromagnetic Field Theory. Key Qualifications Computer aided design&analysis of conventional&novel electrical&magnetic circuits, electrical machines, sensors&transducers, mechatronic systems. Metrology: Electrical&magnetic properties of materials. Electroceramics. Education 1994 Ph. D. The University of Sussex, Brighton, UK 1991 M.Sc. Electrical Education Department, The Institute of Science and Technology, University of Gazi, ANKARA, TURKEY 1984 B.Sc. Electrical Education Department, Technical Education Faculty, University of Gazi, ANKARA, TURKEY Experience Record to date Assoc. Prof. Dr. in Electrical Education Department, Technical Education Faculty, University of Gazi Assist. Prof. Dr. in Electrical Education Department, Technical Education Faculty, University of Gazi Post Doctoral Researcher in Electrical Education Department, Technical Education Faculty, University of Gazi, ANKARA Ph. D. study, Electrical Engineering, The University of Sussex, UK Activities: Position Control of Linear Reluctance Motors by Airgap Magnetic Field Sensing - by this method a number of Hall-effect sensors were used to sense the position of the LRM secondary and measurement method was implemented in a computer based instrumentation system. Magnet2d software (Infolytica corp.) was used for the analysis of the magnetic system M. Sc. study, Electrical Education Department, The Institute of Science and Technology, University of Gazi, ANKARA, TURKEY. Activities: Research on Electromagnetic Rotating Magnetic Stirrer for Continuous Metal Castings Research and Teaching Assistant of Electrical Machines Lab, Electrical

2 Education Department, Technical Education Faculty, University of Gazi, ANKARA, TURKEY Undergraduate student, Electrical Education Department, Technical Education Faculty, University of Gazi, ANKARA, TURKEY Activities: Education + Industry experience Technical high school student, Electrical Department, Isparta Technical High School, ISPARTA, TURKEY Activities: Education + Industry experience Languages Turkish Mother tongue English - Speaking: Good, Reading: Good, Writing: Good PUBLICATIONS Papers: 1) J. D. Edwards, O., Gürdal, Contactless Measurement of the Secondary Position in Linear Reluctance Motors, IEE Proceedings, Electric Power Applications, Vol.142, No.6, p November, ) Gürdal, O., Öner, Y., Design and application of magnetic bearing suspension system in a three phase induction motor, Journal of Engineering Sciences, Vol.4, No.3, p , Çamlık, Denizli, Turkey, (in Turkish) 3) Gürdal, O., Cesur, O., A new method in determination of rotor speed by statoric current measurement in induction motors, Journal of the Institute of Science and Technology of Gazi University, Vol.12, No.1, p , January 1999, Ankara, Turkey. (in Turkish) 4) Gürdal, O., Cesur, O., A new sensorless speed detection method by fluctuation of zero crossing time signals in induction motors, Gazi University, Technical Education Faculty, Polytechnic Journal, Volume 2, Number 1, p.43-51, March 1999, Ankara 5) Gürdal, O., Erdem, Z., A general purpose fuzzy logic control algorithm developed to control of magnetic suspension of iron sphere by fuzzy logic control system, Gazi University, Technical Education Faculty, Polytechnic Journal, Volume 2, Number 3, p September 1999, Ankara 6) Yılmaz, C., Gürdal, O., Irmak, E, Advantages of PIR controlled stairs lighting to conventional timered automats, Gazi University, Technical Education Faculty, Polytechnic Journal, Volume 3, Number 1, p.45-50, Mart 2000 (in Turkish) 7) Üncü, İ. S., Gürdal, O., Obtaining the luminous intensity curves by aid of computer, Gazi University, Technical Education Faculty, Polytechnic Journal, Volume 3, Number 3, p.77-81, September 2000 (in Turkish) 8) Üncü, İ. S., Gürdal, O., Measuring planes used for design of goniophotometer and a goniophotometer application, Journal of the Institute of Science and Technology of Gazi University, Vol.15, No.1, p , January 2002 (in Turkish) 9) Gürdal, O., Öner, Y., Sabit Mıknatıslı Demir Nüveli Küresel Eyleyicinin Bilgisayar Destekli 3 Boyutlu Statik Manyetik Analizi ve Uygulaması (Computer Aided Three Dimensional Magnetostatic Analysis And Application Of Iron Cored Permanent Magnet Spherical Actuator), Journal of The Faculty of Engineering and Architecture of Gazi University (accepted) (in Turkish) 10) Gürdal, O., Elektromanyetik Bombaların Etkileri ve Hasar Vericilikleri (The Effects of Electromagnetic Bombs And Their Lethalities), Adli Bilimler Dergisi (Turkish Journal of Forensic Sciences), September, 2004, Vol:3, Ankara, Turkey (in Turkish) 11) Gürdal, O., Elektromanyetik Bombaların Hedeflenmesi ve Kuramsal Kullanımı (Targeting Electromagnetic Bombs and Their Doctrinel Use) (accepted) (in Turkish)

3 12) Gürdal, O., Elektromanyetik Bombaların Etkilerine Karşı Savunma ve Elektronik Varlıkların ve Bilgisayar Donanımının Dayanıklılaştırılması (Defending Against The Effects of Electromagnetic Bombs and Hardening Electronic Assets And Computer Equipment) (accepted) (in Turkish) 13) Gürdal, O., Fenercioğlu, A., Helisel Yapılı Anahtarlamalı Relüktans Motorun (HY-ARM) Bilgisayar Destekli 3 Boyutlu Statik Manyetik Analizi (Computer Aided Three Dimensional Magnetostatic Analysis of Helically Structured Switched Reluctance Motor (HS-SRM)), Journal of The Faculty of Engineering and Architecture of Gazi University (to be submitted soon) (in Turkish) 14) Gürdal, O., Spreading/constriction resistance is no longer a phenomena, (to be submitted soon) (in Conference Poster Presentations: 1) J. D. Edwards, Gürdal, O., Contactless Position Sensing in Linear Reluctance Motors, (International Magnetic Conference, April 1992 St. Louis, Missouri), Vol.28, No.5, September 1992, pp Conference Presentations: 1) Hüseyin Ekiz, Etem Köklükaya, Osman Gürdal, Can in Automation and Manufacturing Systems, 2 nd International Symposium on Intelligent Manufacturing Systems, 6-7 August 1998, Sakarya University, Industrial Engineering Department, Sakarya, Turkey, pp Volume 1. (in 2) Osman Gürdal, Mehmet Albayrak, Design of an I/O Card to Drive Stepper Motors for Computer Aided Control of A Robot Arm, 2 nd International Symposium on Intelligent Manufacturing Systems, 6-7 August 1998, Sakarya University, Industrial Engineering Department, Sakarya, Turkey, pp , Volume 2. (in 3) Gürdal, O., Erdem, Z. Magnetic Suspension Of Iron Sphere By Fuzzy Logic Control System, 2 nd International Symposium on Intelligent Manufacturing Systems, 6-7 August 1998, Sakarya University, Industrial Engineering Department, Sakarya, Turkey, pp , Volume 2. (in 4) Osman Gürdal, Mehmet Albayrak, Tuncay Aydoğan, Computer Aided Control and Simulation of Robot Arm Moving in Three Dimension, 2 nd International Symposium on Intelligent Manufacturing Systems, 6-7 August 1998, Sakarya University, Industrial Engineering Department, Sakarya, Turkey, pp , Volume 2. (in 5) Gürdal, O., Cesur, O., A New Sensorless Speed Detection Method in Induction Motors, 2 nd International Symposium on Intelligent Manufacturing Systems, 6-7 August 1998, Sakarya University, Industrial Engineering Department, Sakarya, Turkey, pp , Volume 2. (in 6) Çalış, H., Özcerit, A.T., Çetiner, İ., Gürdal, O., Çakır, A., Sensorless Speed Prediction of Induction Machines by using Fluctuation of Zero Crossings of Motor Current, International Conference on Electrical and Electronics Engineering, 3-7 December 2003, Bursa, TURKEY (in

4 MISCELLENAOUS PRESENTATIONS and SEMINARS 1. Adli Mühendislik (Forensic Engineering), EGM Polis Dergisi (Police Magazine), Vol. 41, p.131, August-September, 2004, Ankara, Turkey 2. Adli Elektrik Mühendisliği (Electro-Forensic Engineering), EGM Polis Dergisi (Police Magazine), Vol. 41, p.144, August-September, 2004, Ankara, Turkey 3. Elektrik Kazası Olay Yerinin Korunması ve Kanıtların Muhafazası (Securing and Preserving the Scene of an Electrical Accident), EGM Polis Dergisi (Police Magazine), Vol. 41, p.140, August-September, 2004, Ankara, Turkey 4. Elektrik Kazası Olay Yeri İnceleme Prosedürü (Electrical Incident Investigation Procedures), EGM Polis Dergisi (Police Magazine), Vol. 41, p.135, August-September, 2004, Ankara, Turkey 5. Yaşam Boyu Elektrik Güvenliği Bilgisi (Lifelong Electrical Security Education and Training), EGM Polis Dergisi (Police Magazine), Vol. 41, p.370, August-September, 2004, Ankara, Turkey 6. Elektrik Kazaları ve İlk Yardım (Electrical Accidents and First Aid), EGM Polis Dergisi (Police Magazine), Vol. 41, p.365, August-September, 2004, Ankara, Turkey 7. Temel Elektrik Semineri (Basic Electricity for Forensic Sciences), EGM SASEM, 2004, Ankara, Turkey BOOKS PUBLISHED and UNDER PREPARATION 1) O. Gürdal, Power Electronics (Güç Elektroniği), Nobel Publisher, Ankara, 2000, ISBN (640 pages in A4 size) (in Turkish) 2) O. Gürdal, Sensors and Transducers (Algılayıcılar ve Dönüştürücüler), Nobel Publisher, Ankara, 2000, ISBN (712 pages in A4 size) (in Turkish) 3) O. Gürdal, Electromagnetic Field Theory (Elektromanyetik Alan Teorisi), Nobel Publisher, Ankara, 2000, ISBN (480 pages in A4 size) (in Turkish) 4) O. Gürdal, Design of Electrical Machines (Elektrik Makinalarının Tasarımı), Atlas + Nobel Publisher, Ankara, 2001, ISBN (528 pages in A4 size) (in Turkish) 5) Malzemelerin Elektriksel ve Manyetik Özellikleri (Electrical and Magnetic Properties of Materials) (being prepared in Turkish) 6) Visual Electricity and Magnetism (being prepared in English and Turkish) 7) Temel Elektrik (Basic Electricity) (being prepared in Turkish) 8) Elektroseramikler (Electroceramics) (being prepared in Turkish) 9) Physics&Philosophy&Society&Behaviours&Analogy&Metaphors (being prepared in Turkish) 10) TQM in NGOs (being prepared in Turkish) Subject of MSc. Thesis Electromagnetic Rotating Magnetic Stirrer for Continuous Metal Castings, Institute of Science and Technology of Gazi University, Ankara, 1991.

5 Subject of PhD. Thesis Position Control of Linear Reluctance Motors by Airgap Magnetic Field Sensing, The University of Sussex, Brighton, UK, Teaching activities + courses Fundamentals of Electromagnetic Field Theory, Electrical and Magnetic Properties of Materials Projects and Grants 1. Bor İçerikli (NdFeB) Yüksek Enerji Çarpımlı [(BH) max ] Sabit Mıknatısların Mekanik Alaşımlama/Mekanik Öğütme Yöntemi İle Hazırlanan Nano Boyutlu Tozlardan Üretimi (Production of High Energy Product [(BH) max ] NdFeB Hard Magnets Including Boron by Nano Sized Particle Powders Prepared By Mechanical Milling/Alloying), TR-Prime Ministry- State Planning Organisation grant, $130000, Gazi Üniversitesi İleri Araştırma ve Eğitim Programları (Gazi University Advanced Research and Education Programmes), Material Group-Electrical and magnetic characterisation of materials, TR-Prime Ministry-State Planning Organisation grant, $ , 2001-present 3. Miscellenaous projects about lighting and installation, University of Gazi grant, ~$40000 total, 2002-present Commercial Consultancy and Projects 1. Design of pumps with special electric motors and high speed pumps. 2. Application of soft magnetic composites instead of laminated steel cores. 3. Total Quality Management MSc. and Phd. Thesis being supervised + completed (Student, Subject) 1) Mustafa Acar, Optimal solution of loading of military vehicles by railway, August 1996 (Msc. Thesis, completed) 2) Mehmet Albayrak, Computer aided design and control of a robot arm moving in three dimension, September 1997 (Msc. Thesis, completed) 3) Zeki Erdem, Electromagnetic suspension of an iron sphere by fuzzy logic controller, January 1998 (Msc. Thesis, completed) 4) Yusuf Öner, Design and application of a magnetic bearing in a 3 phases induction motor, June 1998 (Msc. Thesis, completed) 5) Orhan Cesur, A new sensorless speed detection method by zero crossing time signals in induction motors, July 1998 (Msc. Thesis, completed) 6) İsmail Serkan Üncü, Obtaining the light intensity curves by aid of computer, January 1999 (Msc. Thesis, completed) 7) Kadir Cengiz, Fuzzy logic control of a greenhouse, August 1999 (Msc. Thesis, completed) 8) Kadir Yılmaz, Electromagnetic design and proportional position control of an selenoidal valve, September 1999 (Msc. Thesis, completed)

6 9) Cemal Yılmaz, CAN in building automation, February 2001 (Msc. Thesis, completed) 10) Oktay Ermiş, Design and application of an train prototype driven by linear motor and magnetic suspension (Msc. Thesis, completed) 11) İlhan Tarımer, Elimination of gearboxes, etc. in the systems driven by electrical motors (PhD. Thesis, completed) 12) Yusuf Öner, Electromagnetic design and control of an spherical motor (PhD. Thesis, completed) 13) İsmail Serkan Üncü, Transmitting the light intensity curves into a computer environment by methods of ray tracing and radiosity (PhD. Thesis, completed) 14) Nurettin Topaloğlu, Assembly languages in education, November 2002, (PhD. Thesis, completed) 15) Cemal Yılmaz, Fuzzy remote control of network control systems by Profibus-DP (PhD. Thesis, being supervised) 16) Ahmet Fenercioğlu, Electromagnetic combination of motor and rotor of liquid pump unit, (PhD. Thesis, being supervised) 17) Hamit Batır, Electromagnetic design and control of an 8 mm diameter rotor hermetically sealed spherical motor (MSc. Thesis, being supervised) 18) Miscellenaous five MSc. and PhD. theses newly started about electrical and magnetic characterisation of materials (electroceramics) by using impedance spectroscopy and hysteresisgraph. Primary area of interest: Computer aided design&analysis of conventional&novel electrical&magnetic circuits, electrical machines, sensors&transducers, mechatronics systems. Electrical&magnetic properties of materials. Electroceramics. Secondary area of interest: Theory and application of sensors and transducers, building automation, domestic fire and security control systems, computer controlled building automation, lighting and installation techniques, energy saving in domestic accommodations, electrical and industrial measurement. Hobbies: Science Fashion Physics&Philosophy&Society&Behaviours&Analogy&Metaphors TQM in NGOs Assoc. Prof. Dr. Osman Gürdal January 17 th, 2006