NETWORKING ALPHA SIGNS FOR THEATER SOLUTIONS v Single sign networks with AlphaNET plus, Alpha Messaging, or Simply Theater software
|
|
- Avis Richardson
- 8 years ago
- Views:
Transcription
1 NETWORKING LPH SIGNS OR THETER SOLUTIONS v2.0-1 Single sign networks with lphanet plus, lpha Messaging, or Simply Theater software Use this setup when a simple serial (RS232) connection to a single sign is needed. Maximum distance = 50 feet RS foot RS232 cable foot RS232 cable Plugs into the sign s RS232 or TTL jack RJ11-to-25 adapter or a P with a 25-pin RS232 port RJ11-to-9 adapter or a P with a 9-pin RS232 port lphanet plus for Windows v1.2 software Simply Theater software daptive Micro Systems, Inc 7840 N. 86th St Milwaukee, WI US (phone) (fax) sales@ams-i.com
2 NETWORKING LPH SIGNS OR THETER SOLUTIONS v2.0-2 Multiple sign networks with lphanet plus or Simply Theater software Use this setup when multiple signs need to be connected to a serial (RS485) network. This network requires the installation of RS485 wiring. Up to 255 signs can be connected and individually addressed in this type of network. RS485 Maximum network length = 10,000 feet (for 1200 baud) 4,000 feet (for 9600 baud) To next sign. E G foot RS485 cable Plugs into the sign s RS485 jack. (The last sign on the network foot RS485 cable (recommended) must have an End-Of-Line terminator in the sign s RS232 jack.) Modular Network dapter Used to interconnect signs RS485 cable (1000 foot spool) Used to interconnect signs onverter ox III onverts RS232 signals to RS485 signals. E Type 9 RS232 cable onnects onverter ox III to P RS232 port. 9-to-25 adapter Required if P has a 25-pin RS232 port. G lphanet plus for Windows v1.2 software Simply Theater software or more information on RS485 networking, see the document Network onfigurations ( ). daptive Micro Systems, Inc 7840 N. 86th St Milwaukee, WI US (phone) (fax) sales@ams-i.com
3 NETWORKING LPH SIGNS OR THETER SOLUTIONS v2.0-3 One-to-four sign networks with lphanet plus or lpha Messaging software Use this setup when 1 to 4 signs need to be connected to an Ethernet network. The lphanet plus software has the ability to display a unique message on each of the four signs in this network. However, the lpha Messaging software can only send messages to one sign, not four. This setup also requires the use of the Redirector software. Ethernet Ethernet LN using TP/IP protocol (10SE-T using lpha Ethernet dapter) or (100SE-T using MSS100) In order to network LPH signs to a 100SE-T Ethernet LN, each LPH sign must be connected to the LN using a MSS100 Micro Serial Server (see below) lphanet plus for Windows v1.2 software Redirector software must also be used. (This software is included with the lpha Messaging v1.0 software lpha Ethernet dapter kit. See below.) The P must be connected to the Ethernet LN with a network card lpha Ethernet dapter kit Each lpha Ethernet dapter is mounted on the back of the sign and draws it power from the sign itself (no separate power supply is needed). Each lpha Ethernet dapter will need its own unique IP address. (10SE-T only) MSS100 Micro Serial Server Same as above, but either 10SE-T or 100SE-T. or information on using lpha Ethernet dapters and Redirector software, see the document Networking lpha signs with lpha Ethernet dapters (pn ). daptive Micro Systems, Inc 7840 N. 86th St Milwaukee, WI US (phone) (fax) sales@ams-i.com
4 NETWORKING LPH SIGNS OR THETER SOLUTIONS v2.0-4 Multiple sign networks with lphanet plus software Use this setup when multiple signs need to be connected to an Ethernet network. The number of signs in this network is only limited by the number of available IP addresses. The MSS1-T (or MSS100) Micro Serial Server must be configured to operate like a modem. The lphanet plus software has the ability to display a unique message on each of the signs in this network. Ethernet MSS1-T or MSS100 Ethernet LN using TP/IP protocol (10SE-T using lpha Ethernet dapter) or (100SE-T using MSS100) In order to network LPH signs to a 100SE-T Ethernet LN, each LPH sign must be connected to the LN using a MSS100 Micro Serial Server (see below). lso, the P running lphanet plus software must be connected to the Ethernet LN using a MSS100 (see below) lphanet plus for Windows v1.2 software Null modem cable onnects MSS1-T (or MSS100) to the P s RS232 port MSS1-T Micro Serial Server The MSS1-T (or MSS100) must be configured to act like a modem. Each sign on the LN can then be addressed by using the IP address of the lpha Ethernet dapter attached to the sign. This IP address MSS100 Micro Serial Server is sent to the MSS1-T (or MSS100) as part of a standard modem TT command lpha Ethernet dapter kit Each lpha Ethernet dapter will need its own IP address. These will probably have to be assigned by a network administrator. or information on using lpha Ethernet dapters, see the document Networking lpha signs with lpha Ethernet dapters (pn ). daptive Micro Systems, Inc 7840 N. 86th St Milwaukee, WI US (phone) (fax) sales@ams-i.com
5 NETWORKING LPH SIGNS OR THETER SOLUTIONS v2.0-5 Multiple sign networks with lphanet plus software Use this setup when multiple signs need to be connected to an Ethernet network and an RS485 network. Using the Redirector software, up to four MSS485 Micro Serial Servers can be used, and up to 255 signs can be connected to each of these serial servers. The lphanet plus software has the ability to display a unique message on each of the signs in this network. Ethernet / RS485 MSS485 Ethernet LN (10SE-T) using TP/IP protocol RS485 network lphanet plus for Windows v1.2 software Redirector software must also be used. (This software is included with the MSS485 Micro Serial Server. See below.) The P must be connected to the Ethernet LN with a network card. E MSS485 Micro Serial Server Used to connect an Ethernet and a RS485 network. The MSS485 must be assigned an IP address which the lphanet plus software uses to address this device. Up to four MSS485s can be used, and each can address up to 255 signs Modular Network dapter Used to interconnect signs. E RS485 cable (1000 foot spool) Used to interconnect signs foot RS485 cable foot RS485 cable (recommended) Plugs into the sign s RS485 jack. (The last sign on the network must have an End-Of-Line terminator in the sign s RS232 jack.) or information on using lpha Ethernet dapters and Redirector software, see the document Networking lpha signs with lpha Ethernet dapters (pn ). daptive Micro Systems, Inc 7840 N. 86th St Milwaukee, WI US (phone) (fax) sales@ams-i.com
Maximum distance: 15m P/N DESCRIPTION NOTES
NETWORKING LPH SIGNS - Update September 2002 Single sign (RS232) networks Use this setup when a simple RS232 serial connection to a single sign is needed : Maximum distance: 15m P/N ESRIPTION NOTES 1036-9010
More informationNetworking Alpha signs on a TCP/IP network
Networking Alpha signs on a TCP/IP network Contents Introduction................. 2 Why use serial servers?........... 2 Types of serial servers available..... 3 Valid Adaptive signs for an Alpha Ethernet
More informationCREATING YOUR OWN RF SWITCHING SYSTEM
AN2008-08-YOM rev. 2.0 By Sara Nazemzadeh April, 20 Application Note REATING YOUR OWN RF SWITHING SYSTEM Abstract The purpose of this Application Note is to introduce an alternative way of meeting switching
More informationText String Activation
Text String Activation Message Center Protocol Edwards protocol document allows your Edwards Message Center to communicate directly with any device that has a serial port, such as PLCs (programmable logic
More informationSVA025 Netcom2 FAQ Rev 1. Mitsubishi Netcom 2 FAQ
SVA025 Netcom2 FAQ Rev 1 Mitsubishi Netcom 2 FAQ SVA025 Netcom2 FAQ Rev 1 2 What series of Netcom did we purchase? Netcom 2 FAQ Mitsubishi has several different versions of communications available. 1.
More informationDOORKING SYSTEMS 1830 SERIES NETWORK WORKSHOP LAN APPLICATIONS ACCESS CONTROL SOLUTIONS LOCAL AREA NETWORK (LAN) CONNECTION REV 04.
DOORKING SYSTEMS ACCESS CONTROL SOLUTIONS 1830 SERIES NETWORK WORKSHOP LAN APPLICATIONS REV 04.11 LOCAL AREA NETWORK (LAN) CONNECTION Ethernet Connection: An Ethernet Cable, or wireless connection must
More informationData Bulletin. Communications Wiring for POWERLINK G3 Systems Class 1210 ABOUT THIS BULLETIN APPLICATION INTRODUCTION.
Data Bulletin 1210DB0002R3/05 03/2005 LaVergne, TN, USA Communications Wiring for POWERLINK G3 Systems Class 1210 Retain for future use. ABOUT THIS BULLETIN This data bulletin describes the proper wiring
More informationPOS Integration. Prepared by: Binh Nguyen
POS Integration Prepared by: Binh Nguyen Point of Sale (POS) Compatibility To know whether it is possible to integrate your POS system with our DVR, please check whether the type of printer the POS system
More informationDSX Master Communications
DSX Access Systems, Inc. PC to Master Controller - Direct Connect Communications DSX Master Communications Communications between the Comm Server PC and the Master Controller can take several forms which
More information2014 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
AT&T Business in a Box Quick Start Guide Please ensure that you have set-up the equipment before the date scheduled with your AT&T Order Manager for Test and Turn Up of your service What s in the Box The
More informationRJ45 Shielded (standard) port pinout. CS9000, Jetstream 4000 + 8500, Lanstream 2000, RTA8/RJX, RRC16, MTA8/RJX & SXDC8/RJX
Shielded (standard) port pinout Pin Circuit Function 1 DCD Input Data Carrier Detect 2 DSR Output Data Set Ready 3 DTR Input Data Terminal Ready 4 S/GND Signal Ground 5 TXD Output Transmit Data 6 RXD Input
More informationNR TEMPURITY UTOMTED TEMPERTURE MONITORING SYSTEMS Y NETWORKED ROOTIS Quick onnect Guide DOUMENT # Tempurity 1-05-0021.4 Overview of onnection to Tempurity 1. Set the NTMS hardware to work with your network.
More informationYou will find the following information contained in this document: Requirements for performing a Self-Install of your Internet service
Subject : Internet Self-Install You will find the following information contained in this document: Requirements for performing a Self-Install of your Internet service Step-by-step instruction on connecting
More informationTable of Contents. Creating a VC1000 Network... 3
2 Table of Contents Creating a VC1000 Network... 3 Topology... 3 Unit ddressing... 4 Terminating Resistors... 5 Shielding... 5 Interconnecting the common... 6 ias Resistors... 6 VC1000 Hardware Configuration...
More informationApplication Note. Terminal Server G6
MICROSENS GmbH & Co. KG Küferstr. 16 59067 Hamm/Germany Tel. +49 2381 9452-0 FAX +49 2381 9452-100 E-Mail info@microsens.de Web www.microsens.de Summary As of firmware version v10.6 MICROSENS Generation
More informationInstalling remote sites using TCP/IP
AN06 Installing remote sites using TP/IP onnecting via TP/IP networks supports the connection of control units to the server over S485 data lines and also via nodes on TP/IP Ethernet networks. This greatly
More informationApplication & Quick-Start Guide
Model: CRMWIC Web Intelligent Controller 1 This document will illustrate various ways to connect and use a CRM-WIC as well as programming examples. When connecting CRM-WIC, the installer has several interface
More informationCable Pinouts. SRP I/O Module
Cable Pinouts C This appendix lists the cables and connector pinout assignments for the cables used with the ERX-700 series and ERX-1400 series. Topic Page SRP I/O Module C-1 CT1 and CE1 I/O Modules C-4
More informationTCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...
More informationContents. ST9612 Model WIC Printer. Get the original printer s information. Edited 11/04/15
Printer - Replacement The following is a guide on how to swap out a WIC printer with another. A scenario where this might happen is when getting a service replacement for faulty hardware from Source Technologies.
More informationLAN / WAN Connection Of Instruments with Serial Interface By Using a Terminal Server
Products: EFA with EFA Scan, DVRM and DVMD with Realtime Monitor or Stream Explorer DVMD-B1 LAN / WAN Connection Of Instruments with Serial Interface By Using a Terminal Server Remote control of test and
More informationChapter. PLC Communications
PL ommunications hapter In This hapter... Introduction... PL ommunication Ports Specifications... LE Status Indicators... Steps to Using the LIK PL ommunications... Typical ommunications pplications...
More informationWhat is a Home Network? A home network is a collection of two or more home computers connected together through a wired or wireless connection.
Building A Home Network What is a Home Network? A home network is a collection of two or more home computers connected together through a wired or wireless connection. Why should I network my computers
More informationApplication Note: Connecting to a 2500 Series Processor using PLC Workshop
Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The
More information1. MOXA NPort Express TCP/IP to RS-232 server
GS_GSR_GCR_UserManual_App_E_MOXA_V01.doc / 17.08.2009 GeoSIG Ltd. Appendix E Page E-1 1. MOXA NPort Express TCP/IP to RS-232 server 1.1. General Explanations The NPort Express RS-232/422/485 Device server
More informationProgramming and Using the Courier V.Everything Modem for Remote Operation of DDF6000
Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000 1.0 Introduction A Technical Application Note from Doppler System July 5, 1999 Version 3.x of the DDF6000, running version
More informations!nus-elektrotechnikai bt. Industrial IT & Automation
USB/PPI+ Optoelectronic isolated USB/PPI adapter Optoelectronic isolated USB/PPI adapter, can replace Siemens 6ES7 901-3DB30-0XA0, the largest communication distance of up to 2 kilometers. Not support
More informationenervista UR Setup Software Quick Connect Instructions:
enervista UR Setup Software Quick Connect Instructions: The user can connect to the UR relay via front serial port or rear Ethernet port using the Quick Connect feature of enervista UR Setup software.
More informationInstallation Guide. EarthLink
Installation Guide EarthLink Welcome to EarthLink DSL & Home Phone Service Congratulations! You ve made the smart choice for super-fast DSL and super-simple phone service. Follow the instructions in this
More informationQuick Note 32. Using Digi RealPort with a Digi TransPort Router. UK Support September 2012
Quick Note 32 Using Digi RealPort with a Digi TransPort Router UK Support September 2012 1 Contents 1 Introduction... 3 1.1 Outline... 3 1.2 Assumptions... 3 1.3 Version... 3 2 Configuration & scenario...
More informationISDN Phone Lines with Metasys
Metasys Network Technical Manual 636 App. Notes: Network Communications Section Application Note Issue Date 0696 APPLICATION NOTE Phone Lines with Metasys Introduction Page 3 What is? *3 References *3
More informationKnowledge Base POS/C31A Troubleshooting
[Concept] Serial Port Include RS-232, RS-422, RS-485 and USB Currently NUUO only supports RS-232 Also named as COM port by Microsoft Why Null Modem? The RS-232 standard is asymmetrical as to the definitions
More informationfor Windows Media Center User's Guide
for Windows Media Center User's Guide Table of Contents Introduction System Requirements Installation Running HAI Home Control Using HAI Home Control Product Support Introduction Thank you for purchasing
More informationSNMP-1000 Intelligent SNMP/HTTP System Manager Features Introduction Web-enabled, No Driver Needed Powerful yet Easy to Use
SNMP-1000 Intelligent SNMP/HTTP System Manager Features Monitors system fans, temperature, voltage, power supply, CPU fan, CPU temperature, Vcore, watchdog timer etc. Stand alone system monitoring, no
More informationTechnical Manual. For use with Caller ID signaling types: Belcore 202, British Telecom, & ETSI
Technical Manual For use with Caller ID signaling types: Belcore 202, British Telecom, & ETSI Caller ID.com WHOZZ CALLING? POS 2 Caller ID Monitoring Unit Technical Manual For use with Caller ID signaling
More informationMassachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.115 Microprocessor Project Laboratory
Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.115 Microprocessor Project Laboratory Connecting your PSoC Evaluation Board It is easy and fun to avoid
More informationMAX T1/E1. Quick Start Guide. VoIP Gateway. Version 1.0
MAX T1/E1 TM VoIP Gateway Quick Start Guide Version 1.0 Contents INTRODUCTION 1 Hardware Needed Software Needed 1 1 NET2PHONE MAX SET UP Hardware Set Up Software Set Up Set Up Internet Protocol (IP) Address
More informationPC/POLL SYSTEMS Version 7 Polling SPS2000 Cash Register TCP/IP Communications
PC/POLL SYSTEMS Version 7 Polling SPS2000 Cash Register TCP/IP Communications PC/POLL SYSTEMS supports native TCP/IP polling for the SPS2000 cash register. It is recommended users have the register updated
More information026-1608 Rev 0 6-13-00. NetCom Card Installation and Programming Guide
026-1608 Rev 0 6-13-00 NetCom Card Installation and Programming Guide 1640 Airport Road, Suite 104 Kennesaw, GA 31044 Phone: (770) 425-2724 Fax: (770) 425-9319 ALL RIGHTS RESERVED. The information contained
More informationEQUIPMENT SPECIFICATIONS
EQUIPMENT SPECIFICATIONS IC-1600 Intelligent Controller The IC-1600 Intelligent Controller is a fully intelligent panel that has a complete database on board. It operates in conjunction with the Access
More informationMetasys System Direct Connection and Dial-Up Connection Application Note
Metasys System Direct Connection and Dial-Up Connection Application Note Code No. LIT-1201639 Software Release 5.1 Issued August 27, 2013 Supersedes October 4 2010 Refer to the QuickLIT website for the
More informationUsing HyperTerminal with Agilent General Purpose Instruments
Using HyperTerminal with Agilent General Purpose Instruments Windows HyperTerminal can be used to program most General Purpose Instruments (not the 531xx series counters) using the RS-232 Serial Bus. Instrument
More informationEncore Controller to Router Connections
Encore Presentation System Encore Controller to Router Connections Contents: Scope... 2 EXT COMM Pinouts... 2 Cable Connection Straight Through... 3 Cable Connection Null Modem... 3 Lantronix Ethernet
More informationisco Connecting Routers Back to Back Through the AUX P
isco Connecting Routers Back to Back Through the AUX P Table of Contents Connecting Routers Back to Back Through the AUX Ports...1 Introduction...1 Before You Begin...1 Conventions...1 Prerequisites...1
More informationEaton Remote Monitoring Manual
1. Introduction Eaton Remote Monitoring Manual RevB.doc Eaton Remote Monitoring Manual This document describes the architecture and methodology for the Eaton Remote Monitoring (ERM) systems used throughout
More informationXPort Universal Demo Board User Guide
XPort Universal Demo Board User Guide Part Number 900-563 Revision A September 2009 Copyright and Trademark Contacts 2009 Lantronix. All rights reserved. No part of the contents of this book may be transmitted
More informationConnecting and Setting Up Your Laptop Computer
CHAPTER 3 Connecting and Setting Up Your Laptop Computer This chapter explains how to connect your laptop to the Cisco Unified MeetingPlace system and how to set up your laptop so that you can use HyperTerminal.
More informationETHERNET WEATHER STATION CONNECTIONS Application Note 33
ETHERNET WEATHER STATION CONNECTIONS Application Note 33 With WeatherLink and a Device Server INTRODUCTION It is possible to substitute an Ethernet connection for the direct USB or serial connection that
More informationVoice Over Internet Protocol (VoIP) Configuration
(VoIP) Configuration ENGINEERING REPORT No: 02-003 Introduction This report describes interfacing the IPCS VoIP Gateway Model EGW-902 to an ESTeem Model 192E Wireless Ethernet radio modem in a demonstration
More informationTX2123 RS485 TO ETHERNET ADAPTOR
TX2123 RS485 TO ETHERNET ADAPTOR Converts Datacomms between fibre optic Modbus TCP over Ethernet and hard-wired copper Modbus RTU over RS485 Fibre Optic MODBUS TCP/ IP Ethernet Copper MODBUS RTU RS485
More informationD8X / D16X IPHONE INTERFACE
Ness icomms App D8X / D16X IPHONE INTERFACE SETUP GUIDE Revision 1.0.0 Table of Contents Copyright Notice... 3 1. Important Information... 4 2. Wiring Diagram... 5 2.1 RS232 Wiring Setup... 5 2.2 IP232
More informationDataSMART 554 & 558 T1/FT1 Plug-in DSU/CSUs Page 1 of 8. T1/FT1 Single-port Plug-in DSU/CSUs
554 & 558 T1/FT1 Plug-in DSU/CSUs Page 1 of 8 = PDF Leased Line Economical T1 Internet Access Central Site T1 Management T1/FT1 Single-port Plug-in DSU/CSUs Key Features Specifications Ordering Information
More informationManaging Serial Devices in a Networked Environment
Managing Serial Devices in a Networked Environment Lantronix, Inc. 15353 Barranca Parkway Irvine, CA 92618 Tel: +1 (949) 453-3990 Fax: 1+ (949) 453-3995 Introduction The proliferation of network management
More informationCable Guide. Click on the subject to view the information. Digi Cables Building Cables General Cable Information
Cable Guide Click on the subject to view the information. Digi Cables Building Cables General Cable Information Digi Cables Click on the subject to view the information. Digi Connector Options Digi Connector
More informationQSE-CI-NWK-E Control Interface
QSE-CI-NWK-E Control Interface 369373e 1 04.05.16 The QSE-CI-NWK-E is a versatile integration access point for Lutron QS-based systems. Through either RS232 or TCP / IP over Ethernet, third-party devices
More informationCHAPTER COMMUNICATIONS. In This Chapter...
OMMUNITIONS HPTER In This hapter... ommunications: apabilities..........................................- ommunication Ports................................................- ommunications: onnectivity........................................-
More informationYou can search the event by POS and you can also add the Time Search condition to narrow the search range. By
POS Event Search: You can search the event by POS and you can also add the Time Search condition to narrow the search range. By marking the various POS conditions, you can decide the search range. DVR
More informationWindows Pocket PC. 1. Verizon Wireless Mobile Office Kit; which contains a serial data cable for your mobile phone and a PDA adapter
Windows Pocket PC What You Need To Get Started 1. Verizon Wireless Mobile Office Kit; which contains a serial data cable for your mobile phone and a PDA adapter 2. Serial Data Cable or Serial Cradle for
More information16-Port RS232 to USB2.0 High Speed Multi Serial Adapter (w/ Metal Case) Installation Guide
16-Port RS232 to USB2.0 High Speed Multi Serial Adapter (w/ Metal Case) Installation Guide 1. Introduction Thank you for purchasing this 16-Port RS232 to USB2.0 High Speed Multi Serial Adapter. It is an
More informationContents. Section A Networking Basics... 1. 1 Learning the Basics... 3. Section B Wired Ethernet Networking... 17
Contents Section A Networking Basics...................................... 1 1 Learning the Basics............................................. 3 Selecting a network connection........................................
More informationOmni 56K USB Lite Quick Start Guide
Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack
More informations!nus-elektrotechnikai bt. Industrial IT & Automation
USER MANUAL s!nus-elektrotechnikai bt. USB/PPIM+ Siemens S7-200 USB/PPI Multi-Master Cable USB/RS485 Isolated For all PPI-Bus System Summary: USB / PPIM + is the PPI Multi-Master programming Cable which
More informationUDS2100 Quick Start Guide
Quick Start Guide 2008 Copyright Lantronix is a trademark of Lantronix. All rights reserved. 900-447 Rev. B 7/08 QUICK START CONTENTS What s In the Box..........................................................2
More informationSoftware Registration and the DoorKing IM Server Internet Modem (IM) Server Program Summary
Access Control Solutions Software Registration and the DoorKing IM Server Internet Modem (IM) Server Program Summary DoorKing, Inc. info@doorking.com www.doorking.com Rev 7.22.15 Advantage - Software Registration
More informationwww.saj-solar c. om com SAJ Web Portal Introduction Copyright higet Corporation 2009
www.saj-solar.com solar SAJ Web Portal Introduction Contents Introduction Internet Network Configuration Registration ti Online Monitoring Online Management Account iphone/android APP Introduction Introduction
More informationCable Specifications and Information
APPENDIX A This appendix provides the connector and pinout information you need for making or purchasing cables used with Cisco VG224 voice gateway. To order cables from Cisco, see the Obtaining Technical
More informationDraper Low Voltage, Remote Control, Serial and Network Wiring Guide
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide Copyright 2007 Draper Inc. Form LV-RC-Serial-Network_Wiring07 Print ed in U.S.A. Draper Low Voltage, Remote Control, Serial and Network
More informationOperating Instruction MEW01652 Revision -
Operating Instruction MEW01652 Revision - OPC512 G3 V2.0.x for Web-server II, 1598 Author: Rutger Pålsson Date of issue: 2013-05-21 Date of rev: This page has deliberately been left blank. Table of contents
More informationSCREENLOGIC INTERFACE WIRELESS CONNECTION KIT
SCREENLOGIC INTERFACE WIRELESS CONNECTION KIT FOR INTELLITOUCH AND EASYTOUCH CONTROL SYSTEMS INSTALLATION GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Technical
More informationIP Link Device Interface Communication Sheet
This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete
More informationCommunication Setup Application Note
Communication Setup Application Note This Application Note describes how to install and set up communication between the inverter and the SolarEdge Monitoring Server. This document contains the following
More informationEthernet. Customer Provided Equipment Configuring the Ethernet port.
Installing the RDSP-3000A-NIST Master Clock. Ethernet Connect the RJ-45 connector to a TCP/IP network. Equipment The following equipment comes with the clock system: RDSP-3000A-NIST Master Clock Module.
More informationHDCATS-100. Installation Guide
HDCATS-100 Installation Guide 1 Contents Description... 3 Features... 4 Application Diagram... 4 Installation... 5 Local HD port... 6 IR Configuration... 7 Serial Data(RS232)... 8 Ethernet Data... 9 Specifications...
More information50-Port 10/100/1000Mbps with 4 Shared SFP. Managed Gigabit Switch WGSW-50040. Quick Installation Guide
50-Port 10/100/1000Mbps with 4 Shared SFP Managed Gigabit Switch WGSW-50040 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Switch Management... 4 3. Requirements... 5 4. Terminal
More informationHow to setup a the WF5000B Serial WiFi adapter
www.usconverters.com How to setup a the Serial WiFi adapter This Step-by-step guide explains how to get started using the Serial WiFi Adapter part. UPowering the moduleu 2 UConfiguring the parametersu.
More informationTechnical Information Sheet Page 1 of 8
Page 1 of 8 TIS#: 293 Date: November 27, 2006 Issued by: Chris Lawlor Subject Serial Talk Through: Configuring a 3508 with itools through a 6000 Series Recorder Definition: Serial talk-through allows a
More informationTraffic Management Centers for the Extreme Do-It-Yourselfer
Traffic Management Centers for the Extreme Do-It-Yourselfer Tom Mahood City of Orange Traffic Engineer March 28, 2007 ITE 2007 Technical Conference So, can "we" (us City-types) build a TMC ourselves??
More informationDoorKing IM Server TM
Access Control Solutions DoorKing IM Server TM What exactly is the IM Server TM TM? Connection alternatives for programming your DoorKing Telephone Entry and Access Control systems DoorKing, Inc. info@doorking.com
More informationBroadband DSL Quick Start Set Up Guide
Broadband DSL Quick Start Set Up Guide Index What s in the box?... 1 Applying the DSL filters... 2 What devices must be filtered... 3 Connecting the DSL modem... 3-5 Connecting a computer... 5 Setting
More informationFigure 1: RotemNet Main Screen
1 REMOTE CONTROLLER ACCESS This paper summarizes the installation and configuration procedures needed to enable accessing your Communicator and controllers via the Internet. The information contained in
More informationActiontec GT784WN Router
Table of Contents General Information...1 Verify Computer Settings...1 Router Installation...3 Configuring Your Router...3 Configuring Your Computer...7 Configuring Your Email...9 General Information Router
More informationUSER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6
KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly
More informationNetworking 101 (Networking Basics) Presentation to UCHUG - 1/03/07 G. Skalka
Networking 101 (Networking Basics) Presentation to UCHUG - 1/03/07 G. Skalka What is a network? A computer network is two or more computers connected together using a telecommunication system for the purpose
More informationSecure Ethernet Gateway SEG-1 and SEG-M for IEI Access Systems Installation Manual
Secure Ethernet Gateway SEG-1 and SEG-M for IEI Access Systems Installation Manual Section 1: Introduction SECURITY WARNING: New SEG's shipped after April 2008 will have Telnet setup option enabled by
More informationWindows Pocket PC 2002
Windows Pocket PC 2002 What You Need To Get Started 1. Verizon Wireless Mobile Office Kit; which contains a serial data cable for your mobile phone and a PDA adapter 2. Serial Data Cable, Serial Cradle
More informationComputer Networking. Definitions. Introduction
Computer Networking Definitions DHCP Dynamic Host Configuration Protocol It assigns IP addresses to client devices, such as desktop computers, laptops, and phones, when they are plugged into Ethernet or
More informationContents Chapter 1: Introduction... 3 Chapter 2: Ethernet (LAN)... 5 Chapter 3: ZigBee Wireless Connection Options... 7
Contents Chapter 1: Introduction... 3 Communication Types and Functionality... 3 Communication Connectors... 3 Communication Lightning Protection... 4 Chapter 2: Ethernet (LAN)... 5 Single/Multiple Devices,
More informationNetwork & Internet Installation & Information Guide Fall 2004 Edition. Campus Ethernet For PCs using Windows 2000 & XP
Network & Internet Installation & Information Guide Fall 2004 Edition Campus Ethernet For PCs using Windows 2000 & XP Table of Contents Overview... 2 Requirements... 2 Physically connect your computer
More informationIP Interface for the Somfy Digital Network (SDN) & RS485 URTSII
IP Interface for the Somfy Digital Network (SDN) & RS485 URTSII Internet Protocol (IP) Interface Product Options Cat # 1810815 IP Interface Only Cat # 1810870: Interface and DB9/RJ45 Adapter (9015028)
More informationSDN INSTRUCTIONS 07/10, Ver 1.2. Somfy Digital Network (SDN) Installation and Programming
Somfy Digital Network (SDN) Installation and Programming SSoomffyy SSyysst teemss IInncc.. 1 Table of Contents 1 General Information and Features... 3 1.1 ILT2 Motor... 3 1.2 SDN Switches... 4 1.3 ILT2
More informationENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION
ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is
More informationHow to deploy console cable to connect WIAS-3200N and PC, to reset setting or check status via console
System s web management can also be accesses via WAN port as long as the administrator uses an IP address listed in Management IP Address List setting. If both WAN and LAN ports are unable to reach web
More informationMulti-Master DF1 Protocol User Guide
Multi-Master DF1 Protocol User Guide Part Number 900-282 Revision B August 2004 Copyright & Trademark Contacts 2002, Lantronix. All rights reserved. No part of the contents of this book may be transmitted
More informationIP SERIAL DEVICE SERVER
IP SERIAL DEVICE SERVER ( 1 / 2 / 4 serial port ) Installation guide And User manual Version 1.0 1Introduction... 5 1.1Direct IP mode...5 1.2Virtual COM mode...5 1.3Paired mode...6 1.4Heart beat... 6
More informationEDI Distributor Control Interface Wiring and Setup Instructions
Universal I/O EDI Distributor Control Interface Wiring and Setup Instructions EDI UNIVERSAL I/O INTERFACE MODULE The only interface needed for EDI-V5 controls Network compatible with all older EDI controls
More informationControl Technology Corporation CTC Monitor User Guide Doc. No. MAN-1030A Copyright 2001 Control Technology Corporation All Rights Reserved Printed in USA The information in this document is subject to
More informationM.8 Property Management Software
M.8 Property Management Software The Property Management Software Interface is used to post Room Charges and Corporate Accounts. The interface is Serial between POS Server and PMS Server. There are two
More informationScreenLogic Wireless Connection Kit. Installation Guide. pool/spa control system
pool/spa control system ScreenLogic Wireless Connection Kit Installation Guide P/N 520663 - Rev B 8 Technical Support Contact Technical Support at: Sanford, North Carolina (8 A.M. to 5 P.M.) Phone: (800)
More information1 Serial RS232 to Ethernet Adapter Installation Guide
Installation Guide 10/100 Mbps LED (amber color ) Link/Activity LED (green color ) 1. Introduction Thank you for purchasing this 1-port RS232 to Ethernet Adapter (hereinafter referred to as Adapter ).
More informationAccessing I2C devices with Digi Embedded Linux 5.2 example on Digi Connect ME 9210
Accessing I2C devices with Digi Embedded Linux 5.2 example on Digi Connect ME 9210 Document History Date Version Change Description 17/09/2010 Initial entry/outline 24/02/2011 V1.1 Retested with latest
More information