Polycom Video Products

Transcription

1 Polycom Video Products Polycom Video Polycom Video Trade-In Program Polycom s Video Trade-In Program rewards you when you trade-in competitive or Polycom video equipment and purchase eligible Polycom video products. End User customers can qualify for rebates up to $1,500 on purchases of new Polycom VSX video conferencing solutions from a Certified Polycom Reseller. Offer Valid: January 1, 2007 through December 31, 2007 As the market leader, Polycom enables people to communicate and collaborate easily and efficiently through the broadest array of video, voice, and data conferencing solutions. Polycom provides customers with standards-based conferencing solutions that are easy to deploy and manage, as well as easy-to-use. Supported by an open architecture, they integrate seamlessly with leading telephony and presence-based networks. How to Participate STEP 1: Purchase a new qualified VSX system from a Certified Polycom Reseller. (See table of qualifying products) STEP 2: Complete the Video Trade-In Claim Form and Letter of Authentication and Destruction. STEP 3: Include digital photos of the trade-in equipment before and after destruction with the serial number clearly visible in both photos. The serial number MUST be legible in the digital photos for tracking and auditing purposes. STEP 5: Polycom will issue each rebate check directly to the End User customer within 6 weeks of receiving qualified and verified claims.* In order to qualify for the Video Trade-In Program rebate, the old Polycom equipment must have been purchased at least 12 months prior to the purchase date of the new equipment. End User customers must provide proof-of-purchase on the Polycom equipment with the Claim Form. Products purchased within the last 12 months do not qualify for the trade-in program. *The rebate check will be issued to the end user customer unless item #6 under terms and conditions is properly completed. For Complete Terms and Conditions, please see the Terms & Conditions section. Questions? Any questions regarding this rebate should be addressed to polycom@rebate-zone.com or STEP 4: Submit completed Claim Form, Letter of Authentication and Destruction, proof-of-purchase (resellers customer invoice) and digital photos to the address below. All Claim Forms must be submitted within 90 days of purchase. 1

2 Rebates are offered on the new video conferencing unit being purchased not the product being traded-in. One trade-in unit must be confirmed destroyed for every qualifying new unit purchased. Rebate Amounts Purchase these eligible products and trade-in qualifying Part Number Polycom Equipment Competitive Equipment group video conferencing equipment for a rebate. End User Rebate Amounts End User Rebate Amounts VSX 8800 Presenter MP VTX $1,000 $1,500 VSX 8800 Presenter MP $1,000 $1,500 VSX 8400 Presenter Voice-Tracker VTX $1,000 $1,500 VSX 8400 Presenter Voice-Tracker $990 $1,500 VSX 8400 Presenter VTX $900 $1,500 VSX 8400 Presenter $900 $1,500 VSX $850 $1,000 VSX 7800e Presenter MP VTX $900 $1,500 VSX 7800e Presenter MP $750 $1,500 VSX 7400e Presenter VTX $750 $1,500 VSX 7400e Presenter $725 $1,500 VSX 7000e VTX $500 $1,000 VSX 7000e $500 $1,000 VSX 7800s Presenter MP VTX $500 $1,000 VSX 7800s Presenter MP $500 $1,000 VSX 7400s Presenter VTX $500 $1,000 VSX 7400s Presenter $500 $1,000 VSX 7000s VTX $495 $750 VSX 7000s $250 $750 V N/A $250 VSX 3000 IP N/A $750 VSX 3000 IP/ISDN N/A $750 VSX 5400 Presenter VTX $250 $500 VSX 5400 Presenter $250 $500 VSX 5000 VTX $250 $500 VSX $250 $500 HDX $1,300 $2,000 HDX $1,000 $1,600 HDX 9002 XL $1,300 $2,000 HDX 9002 XLP $1,800 $2,250 HDX $920 $1,400 HDX 9001 XL $1,300 $2,000 HDX 9004 Eagle Eye Camera* $200 $200 * Must be purchased with HDX 9004 codec. Approved Polycom Trade-In Equipment VSX All group conferencing models (excluding VSX 3000) Codec ViewStation All including ViewStation EX, ViewStation FX & VS4000 Codec ipower ipower 600 series or older, ipower 900 series, & ipower 9000 series Codec 2

3 Approved Competitive Trade-In Equipment PictureTel Legacy SwiftSite I & II Entire System Venue, Concorde or System 4000 Codec Intel TeamStation Codec Tandberg MV 6000 or Vision 500, 550, 770, 800, 880, 1000, 2500, 5000, 6000, 7000, 8000 Codec Sony Trinicom 5100, Trinicom 4000, Trinicom 3100 or Mini 1000, PCS1600, PCS1600/B, Codec PCS1600IP, PCS1600ME2, PCS6000/1024, PCS6000/1536, PCS6000/512, PCS6000/PRI, PCS6000IP, PCS-1, PCS -11 VTEL TC 1000, TC 2000 or LC 5000, Media Max, Galaxy, ESA Series Codec Aethra Vega Entire System British Telecom Any BT Legacy Room System (i.e. BT 2300) Codec Huawei 8020 Plus, ViewPoint 8030mBox, ViewPoint 8620 Plus Codec Zylotech ComsLINK MultiConnect, TV ComsLINK Codec Terms and Conditions 1. The equipment being traded in must be in use and in working condition prior to destruction to be eligible for this rebate program. See Claim Form. 2. End Users must purchase a new qualified video conferencing unit along with an annual maintenance service agreement from a Polycom Certified Channel Partner and trade-in an eligible group video conferencing system to be eligible for this rebate program. One trade-in unit must be confirmed destroyed for every qualifying new unit purchased. 3. Polycom must receive trade-in Claim Form with all required documentation within 90 days of purchase. Note: If the trade-in documentation and digital photos are not received within 90 days from date of purchase, program participation will be declared incomplete, and the End User customer will not receive the rebate. 4. Required documentation includes: completed Claim Form, Letter of Authentication and Destruction, reseller invoice and digital photos of the trade-in equipment with the serial number clearly visible and legible in both photos. 5. Special Note: In order to qualify for the rebate for trading in Polycom products, the old Polycom equipment must have been purchased at least 12 months prior to the purchase date of the new equipment. End User customer must provide proof-of-purchase of the Polycom equipment being traded-in with the Claim Form. Products purchased within the last 12 months do not qualified for this trade-in program. 6. Rebates checks will be issued and sent directly to the End User. If a customer such as a government agency, is unable to accept rebate checks directly from Polycom, a check may be issued to the reseller. In this case, the reason must be documented on the Claim Form and authorized by the end-user customer. The reseller must provide the rebate in advance to the End User customer. The reseller invoice must include a line item deduction off the total invoice amount for the full rebate amount to validate the up front rebate was given. 7. The End User will be sent an confirmation when their claim is received. Polycom is not responsible for lost or misdirected shipments, , mail or faxes. 8. Polycom has the right to call the End User at any time for verification purposes. 9. This offer is only available to End User customers who purchase from a certified Polycom Channel Partner. 10. This offer is void where prohibited or otherwise restricted by law. Rebates will be sent within 6 weeks of receiving all the necessary documentation (completed Claim Form, Letter of Authentication and Destruction, proof-of-purchase (resellers customer invoice) and digital photos of the trade-in equipment with the serial number clearly visible and legible in both photos). 11. Program valid January 1, 2007 through December 31, 2007 or until terminated by Polycom. 12. This offer may not be combined with any other promotional offer and Polycom reserves the right to modify or cancel this program at any time. 13. PVX and ViaVideo products are not eligible for this program. 14. No exceptions to this program will be allowed. Polycom has the right to deny all claims that do not meet the criteria outlined in this document. 15. Any questions regarding this rebate should be addressed to polycom@rebate-zone.com or

4 Claim Form End User Company Name:* End User Contact Name: End User Address: City: State: Zip: End User Phone: End User Yes, please sign me up for Polycom s newsletter Sights & Sounds. End User Signature: I have read and agree to the terms and conditions of this rebate program. Channel Partner Name: Sales Person: Channel Phone: Channel Address: City: State: Zip: If the End User cannot receive a check direct from Polycom fill out this information: Reason End User cannot receive a check directly from Polycom (See Terms and Conditions for details. Reseller invoice must include a line item deduction off the total invoice amount for the full rebate amount): Please issue rebate check to reseller listed above (reason): I have read and agree to the terms and conditions of this rebate program. Signature: (Must be signed by an authorized end-user customer representative) Trade-In Products Trade-In Equipment (the following information is required) Manufacturer and model: Quantity: Manufacturer and model: Quantity: Product Serial Number: Product Serial Number: Serial numbers for trade-in product must be included (Use additional sheet if needed). New Polycom Product Purchased (the following information is required) Product name and model: Quantity: Rebate Amount: Product name and model: Quantity: Rebate Amount: Total Rebate: *The rebate check will be issued to the end user customer unless the third box above is properly completed. Send completed trade-in documentation to: Polycom Promotions, Promotion number: H89981, P.O. Box , White Bear Lake, MN , Fax ( Subject line must contain: Company Name Video Trade-in Program) 4

5 Letter of Authentication and Destruction Polycom Trade-in Program Video Products I acknowledge and agree that the rebate offered for the Polycom products purchased and the equipment being traded-in/destroyed complies with the terms and conditions outlined in the Polycom Video Trade-in Program documentation. On behalf of (company name), I do hereby certify by my signature below, that the equipment being traded in was purchased on (date), and, prior to destruction, was installed and in use in our normal business operations. I further certify that the equipment being traded-in will be properly disposed of and will not be used in any capacity within our organization or be resold for use at any other company. To confirm the trade-in product will not be used we have enclosed digital photos of the equipment before and after destruction, clearly and legibly showing the serial number in both photos for verification purposes. Signature Date (Must be signed by an authorized end-user customer representative) Please Print: Name: Title: Telephone Number: To be eligible for the trade-in rebate, this form must be signed and submitted along with copies of all the required documentation. Attach Photocopy of business card here Official use only: Date Received Approved / Denied Rev Polycom, Inc. All rights reserved. Polycom the Polycom logo are registered trademarks of Polycom, Inc. All other trademarks are the property of their respective owners. Information in this document is subject to change without notice. 5