The Design, Development, and Testing of an Open Standards-Based Simulation Data Management and Archival System
|
|
- Gregory Logan
- 8 years ago
- Views:
Transcription
1 The Design, Development, and Testing of an Open Standards-Based Simulation Data Management and Archival System May, 2012 Keith Hunten, P.E. Advanced Development Programs Lockheed Martin Aeronautics
2 Overview of Open SimDM SimDM Program Objectives Use cases Product Functionality Open SimDM Architecture Pilots and Dissemination Conclusions
3 SimDM Program Objectives Improve the effectiveness of simulation and analysis programs and the sharing of the information produced Simulation data will be made accessible for the support and upgrade of aircraft, land vehicles, and ships: Allows users such as national Ministries of Defence and Air Logistics Centers to have access to simulation information. SimDM will interface with off-the-shelf CAD and CAE engineering applications: Provides the mechanisms for single access to product structure, CAD models, and CAE simulation data of engineering programs. Long term data retention issues will be resolved by using the internationally-recognized ISO e2 STEP standardized format: Enables cost-effective life-cycle processes.
4 Setting the Scene for the SimDM Project CAD Composite Structures CAE
5 SimDM Approach: Open Simulation Data Management AP209e2 = ISO e2 Multidisciplinary analysis and design AP203 AP209 CAD, PLM Native SimDM EDMserver TM Native To/From AP209 Translation High Level AP209 API for PLM and CAD/CAE Native Models EDM Models ISO /26 (HDF5 Models) SimDM Archived Data Native Native Native Models Models Models ISO ISO ISO /26 HDF5 HDF5 (HDF5 Model Model Models) CAE Web-Based Access AP209 AP209 API Web-Based PLM/CAD/CAE Data Query and Graphical Display
6 Use Cases
7 Simulation Data Management Use Case 1 Preliminary design models Design requirements Manage CAD/ CAE model as in SimDM D2.1 Requirements and architecture, figure 1, Product Development Process AP203 CAD/PDM model, native model Management of data on an active program A1.3.1 AP203 CATIA export PDM (Teamcenter) Native CAD/PDM model Analysis type Boundary requirements Load requirements CAE Preprocessing A1.3.2 PATRAN, Analysis model, Hypermesh, Loads, Abaqus/CAE Boundaries Feedback, snapshot of analysis results files (archive) Analysis shape, Loads, Boundaries Feedback CAE analysis NASTRAN, Abaqus A1.3.3 Analysis results, SLIM configuration, SLIM control Integrity requirements CAE Postprocessing A1.3.4 PATRAN, Hypermesh, Abaqus/CAE, SLIM, Vision Analysis results, SLIM configuration, SLIM control AP209e2 CAE model Simulation Data Management A1.3.5 Archival Information Package (P21/26)
8 Simulation Data Management SimDM data delivery Request for repair A6 Request for replacement of not supported part A7 Use Case 2 SimDM data delivery Browse archive for applicable CAD/CAE data A10 Produce STEPfile of CAD/CAE model A11Tabular analysis results Use in customer support organizations STEP-file of CAD/CAE model Replacement To system System upgrade A8 Produce tabular analysis results A12 Produce replacement A14 Change in system use A9 Produce graphical analysis results A13 Graphical analysis results
9 Simulation Data Management Request for system delivery A5.1 Use Case 3 Baseline Prepare AIP A5.4 Archival Information Package (P21/26) Long term archival of program data Baseline Request for system back-up A5.2 Baseline Deliver to customer A5.5 Request for duplication for trade study A5.3 Baseline Copy SimDM production database SimDM DB copy Install on local server Copied SimDM database A5.6 A5.7
10 Product Functionality
11 SimDM Software Products CAD and CAE application integration kit AP209e2 converter development kit Business Object API in C++ ISO read and write C++ class generator from EXPRESS NASTRAN-to-AP209e2 converter Abaqus-to-AP209e2 converter Open Simulation Data Management Client-server application for simulation data management and archival
12 Open SimDM Toolkit for CAD and CAE Application Integration Open SimDM interfaces with off-the-shelf CAD and CAE engineering applications A high level Application Programming Interface (API) provides access to product structure, CAD models, and CAE simulation data in AP209e2 representation. Importers for NASTRAN and Abaqus are included. NASTRAN CAE Abaqus Read Convert High Level AP209 API for PLM and CAD/CAE AP209 AIM data SimDM EDMserver TM ISO AIM Models
13 Open SimDM Simulation Data Management Capabilities Management of design and engineering analysis data Product structure driven file management Resource allocation Collaboration and communication Separation of responsibilities Viewing of design and engineering data Textual queries into AP209e2 Archival of data packages
14 Open SimDM CAD and CAE Display Display of design, analysis product structures, geometry and analysis data in AP203e2 and AP209e2 formats and Native formats (NASTRAN, Abaqus)
15 Open SimDM Long Term Archival and Retrieval of Simulation Data Data packages with product structure data, associated files (internal and external) and meta data Attach validation information Zipped file Maintain product structure as folder structure Maintain original file names Consulting LOTAR specifications Baseline Request for system delivery A5.1 Request for system back-up A5.2 Request for duplication for trade study A5.3 Baseline Baseline Baseline Prepare AIP A5.4 Copy SimDM production database A5.6 Archival Information Package (P21/26) SimDM DB copy Deliver to customer A5.5 Install on local server A5.7 Copied SimDM database
16 Open SimDM Architecture
17 Architectural Overview (1) Open SimDM is a client/server collaboration platform
18 Architectural Overview (2) AP209e2 = ISO e2 Multidisciplinary analysis and design AP203 AP209 CAD, PLM Native SimDM EDMserver TM Native To/From AP209 Translation High Level AP209 API for PLM and CAD/CAE Native Models EDM Models ISO /26 (HDF5 Models) SimDM Archived Data Native Native Native Models Models Models ISO ISO ISO /26 HDF5 HDF5 (HDF5 Model Model Models) CAE Web-Based Access AP209 AP209 API Web-Based PLM/CAD/CAE Data Query and Graphical Display
19 Pilots and Dissemination
20 Organizations Interested in Beta Pilot Testing EADS/Airbus (Crescendo) LM Aero, Boeing, JPL and GD-EB/NSRP SINTEF (TERRIFIC/EU)
21 Publically Available CAE Models for Testing Ultra-light glider R/C model airplane Coarse, Fine Grid Versions ITAR restriction free AP203, AP209e1/e2, NASTRAN, Abaqus
22 Contributions to Standards Progressed AP209e2 to DIS Initial NASTRAN and Abaqus readers available Hamonized AP209e2 and AP242 Business Objects 25,1(23,39) model_ref node_list L[1:?] BO_Element 1 23,1 BO_Fea_model 24,5 BO_Node element_identification description STRING STRING Simplified programming interface for AP209e2 C++ API for use in translators Generated from the BO model EXPRESS and AIM Populates an AIM model ISO (binary file format) completed Reader and writer is included in release of EXPRESS Data Manager. coordinate_system fea_representation_ item 29,1 BO_Curve_element 27,2 BO_Directionally_explicit_element 27,3 BO_Explicit_element 26,2 BO_Point_element 27,1 BO_Substructure_element 28,3 BO_Surface_element 26,1 BO_Volume_element
23 Dissemination ISO /42/43/... ISO ISO e2 AP209 recommended practices AP209e2 API User s Guide Business Object Information Model EDMassist Programmer s Guide Scientific papers API Reference Manual (Doxygen)
24 Functioning beta Open SimDM solution for standards compliant simulation data management available Converter development SDK NASTRAN and Abaqus import translators Client/server application Validated use of AP209e2 for sharing PLM, shape and CAE information Entering beta test phase with industry partners Conclusions
25 End For any questions, please contact Jotne at or ( ) Web:
CAE DATA & PROCESS MANAGEMENT WITH ANSA
CAE DATA & PROCESS MANAGEMENT WITH ANSA Srikanth RAGHOTHAM Volvo India Private Limited Volvo Group Bangalore INDIA KEYWORDS Enovia-2-Ansa, Ansa Data Management (Ansa-DM) TECHNICAL PAPER CAE Data & Process
More informationMSC Aerospace Solutions: Optimizing the Design-to-Certification Process
MSC Aerospace Solutions: Optimizing the Design-to-Certification Process Aerospace Business Unit The MacNeal-Schwendler Corporation Los Angeles, California USA Abstract This paper describes MSC's solutions
More informationProduct Performance Information Management NSRP Conference, May 14-16, San Diego, CA
Product Performance Information Management NSRP Conference, May 14-16, San Diego, CA Alhad Joshi Director, Enterprise Solutions 2 Agenda 1. Introduction 2. Domain & Positioning 3. Challenges for Stake-holders
More informationwith Interoperability
Simulation Data Management with Interoperability across domains Andreas Schreiber Matthias Grau Paul Downing PROSTEP AG Dolivostraße 11 64293 Darmstadt www.prostep.com Company Information Since it s foundation
More informationSystems-driven Product Development. Overview
Systems-driven Product Development Overview Key PLM Requirements to Deliver Systems-Driven Product Development Key PLM Requirements to Deliver Systems-Driven Product Development What Part(s) # to order
More informationThe Enterprise Solution for Product Innovation. Altair Data Manager. Where is your product performance data?
The Enterprise Solution for Product Innovation Altair Data Manager TM Where is your product performance data? Unmanaged and uncontrolled product performance data, including CAE and test information data,
More informationFord Motor Company CAE PLM Solution and integration with CAE Pre-Processor Software
Dr. Ulrich Fox, Ralf Fachbach Ford Motor Company CAE PLM Solution and integration with CAE Pre-Processor Software 2011 European HyperWorks Technology Conference Bonn, November 8 9, 2011 Introduction Page
More informationCAD Model Validation in the Product Life Cycle Management
CAD Model Validation in the Product Life Cycle Management CAPVIDIA CEO Tomasz Luniewski BOEING is a trademark of Boeing Management Company. GPDIS_Template_2009.ppt 9/23/2009 1 Company Introduction Founded
More informationEnjoyable Data Management An Oxymoron?
9. LS-DYNA Forum, Bamberg 2010 Simulationsdatenmanagement (SDM) Enjoyable Data Management An Oxymoron? J. Seybold Altair Engineering GmbH 2010 Copyright by DYNAmore GmbH M - I - 41 Simulationsdatenmanagement
More informationImplementing Ontology-based Information Sharing in Product Lifecycle Management
Implementing Ontology-based Information Sharing in Product Lifecycle Management Dillon McKenzie-Veal, Nathan W. Hartman, and John Springer College of Technology, Purdue University, West Lafayette, Indiana
More informationMULTIDISCIPLINARY DESIGN OPTIMIZATION (MDO) USING ANSA/µETA POSTPROCESSOR AND ISIGHT
MULTIDISCIPLINARY DESIGN OPTIMIZATION (MDO) USING ANSA/µETA POSTPROCESSOR AND ISIGHT Frederic KRABCHI Simulia, France Abstract: Increasingly, industries are using process automation tools in simulation-based
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The
More informationIntegrating Teamcenter Simulation Process Management with ANSA
Integrating Teamcenter Simulation Process Management with ANSA White Paper In most companies, engineers use tens or even hundreds of different tools to perform various types of simulations. Integration
More informationFederated, Generic Configuration Management for Engineering Data
Federated, Generic Configuration Management for Engineering Data Dr. Rainer Romatka Boeing GPDIS_2013.ppt 1 Presentation Outline I Summary Introduction Configuration Management Overview CM System Requirements
More informationVelocity Series Engineering productivity at your fingertips!
Velocity Series Engineering productivity at your fingertips! Velocity Series Engineering Productivity at your Fingertips! The Velocity Series addresses these common issues with: A modular, yet integrated
More informationImplementation of STEP-TAS Thermal Model Exchange Standard in Thermal Desktop
Implementation of STEP-TAS Thermal Model Exchange Standard in Thermal Desktop Tim Panczak Georg Siebes C&R NASA/JPL 303.971.0292 Fax 303.971.0035 Outline Background of STEP-TAS Phase I SBIR Results Future
More informationLong Term Knowledge Retention and Preservation
Long Term Knowledge Retention and Preservation Aziz Bouras University of Lyon, DISP Laboratory France abdelaziz.bouras@univ-lyon2.fr Recent years: How should digital 3D data and multimedia information
More informationXT B-Rep; Making it Real
XT B-Rep; Making it Real John Juckes Siemens PL SEPTEMBER 12-14 What is XT? Based on research from the Cambridge University Computer lab under Ian Braid The world s leading high precision, production-proven,
More informationSimulation Data Management with Interoperability across domains
Simulation Data Management with Interoperability across domains Matthias Grau PROSTEP PROSTEP AG Dolivostraße 11 64293 Darmstadt www.prostep.com PROSTEP AG 2007 Introduction CAE today is used increasingly
More informationSimulation Data and Process Management: Why PLM Integration is Critical?
Simulation Data and Process Management: Why PLM Integration is Critical? NAFEMS September 27, 2007 Eric Riedy Teamcenter Proven Leadership Companies trust UGS to manage product knowledge 3,000,000 licenses
More informationAutomotive CAE Integration.
WHITEPAPER Automotive CAE Integration.. 2010 AUDI AG BMW AG Daimler AG Dr. Ing. h. c. F. Porsche AG Volkswagen AG PROSTEP AG Automotive CAE Integration Addendum to Automotive CAE Integration: Requirements
More informationWhat s new in Teamcenter Service Pack 10.1.4
Siemens PLM Software What s new in Teamcenter Service Pack 10.1.4 Benefits Streamlined collaboration between mechanical and electronic design teams Improved software, development and delivery with integration
More informationPractical Application of Service Oriented Architecture
Practical Application of Service Oriented Architecture Teamcenter SOA Steve Chesney, Siemens PLM Software GPDIS_2012.ppt 1 Teamcenter Architecture Vision The Siemens vision is to create the industry leading
More informationStructure of the presentation
Integration of Legacy Data (SLIMS) and Laboratory Information Management System (LIMS) through Development of a Data Warehouse Presenter N. Chikobi 2011.06.29 Structure of the presentation Background Preliminary
More informationLong Term Archiving and Retrieval. of Product Data within the Aerospace Industry (LOTAR)
White Paper for Long Term Archiving and Retrieval of Product Data within the Aerospace Industry (LOTAR) Technical Aspects of an approach for application of Project Group LOTAR : Version: 1.0 Status: Author:
More informationBest Practices for CAD Data Migration
Best Practices for CAD Data Migration M a r c h 2011 TABLE OF CONTENTS Abstract... 3 Abbreviations... 4 Introduction... 5 Business Drivers for CAD Data Migration... 6 Data Migration Challenges... 7 Recommended
More informationPLM for the Midmarket
PLM Connection Nordic May 20, 2014 Jan Larsson; PLM for the Midmarket Smarter decisions, better products. Making Successful Products Has Never Been More Complex... Intelligent Products Exploding Digital
More informationFEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt
)($:(%$63 6WDNHKROGHU1HHGV,VVXH 5HYLVLRQ+LVWRU\ 'DWH,VVXH 'HVFULSWLRQ $XWKRU 04/07/2000 1.0 Initial Description Marco Bittencourt &RQILGHQWLDO DPM-FEM-UNICAMP, 2000 Page 2 7DEOHRI&RQWHQWV 1. Objectives
More informationNew Standards Based Data Exchange Bridge For Design (CAD), Analysis (CAE) And Manufacturing (CAM) Of Composite Structures
New Standards Based Data Exchange Bridge For Design (CAD), Analysis (CAE) And Manufacturing (CAM) Of Composite Structures Keith Hunten, Lockheed Martin Tactical Aircraft Systems (LMTAS) John Klintworth,
More informationEnterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113
Enterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113 Contents Enterprise resource planning (ERP) Product data management (PDM) Product lifecycle management
More informationBiorepository and Biobanking
Biorepository and Biobanking LabWare s solution for biorepositories and biobanks combines powerful specimen tracking and logistics capabilities with specimen processing and workflow management features.
More informationVCE Vision Intelligent Operations Version 2.5 Technical Overview
Revision history www.vce.com VCE Vision Intelligent Operations Version 2.5 Technical Document revision 2.0 March 2014 2014 VCE Company, 1 LLC. Revision history VCE Vision Intelligent Operations Version
More informationProduct Data Management
Product Data Management Introduction to Product Data Management Product data means in this context in principle all the information that is somehow relevant to the product. Under here are examples of product
More informationWhite Paper. PROSTEP AG Dolivostrasse 11 64293 Darmstadt Germany Phone +49 6151 9287-0 Fax +49 6151 9287-326 info@prostep.com www.prostep.
White Paper 3D Formats in the Field of Engineering a Comparison When the source system is not available, too costly to propagate widely, or full model fidelity is not required, neutral 3D formats are essential
More informationProduct Data Management Working with Databases
Product Data Management Working with Databases MAE 455 Computer-Aided Design and Drafting Purpose of PDM Software Product Data Management (PDM) software enables members of a team or enterprise to share
More informationTeamcenter 8.3. Getting Started with Vendor Management. Publication Number PLM00184 B
Teamcenter 8.3 Getting Started with Vendor Management Publication Number PLM00184 B Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle
More informationAutomated Reporting and Workflow Management of LS-DYNA Simulations
3. LS-DYNA Anwenderforum, Bamberg 2004 CAE / IT III Automated Reporting and Workflow Management of LS-DYNA Simulations Author: Dr. Jochen Seybold Altair Engineering GmbH, Germany Correspondence: Dr. Jochen
More informationPro/INTRALINK 9.0/9.1 Curriculum Guide
Pro/INTRALINK 9.0/9.1 Curriculum Guide NOTE: For a graphical depiction of the curriculum based on job role, please visit this page: http://www.ptc.com/services/edserv/learning/paths/ptc/proi_90.htm Web
More informationAerospace Supply Chain Engineering Enablement
Aerospace Supply Chain Engineering Enablement Design Authority through Integrated Collaboration Martin Frenzel T-Systems International GPDIS_2013.ppt 1 Agenda 1 2 3 4 5 T-SYSTEMS PLM COLLABORATION WHAT
More information5. Product Lifecycle Management. Database Technologies for Integrating Engineering Data
5. Product Lifecycle Management Database Technologies for Integrating Engineering Data Overview Motivation The Product Lifecycle The Product Development Process Islands of Automation Overview of Product
More informationCONDOR as Job Queue Management for Teamcenter 8.x
CONDOR as Job Queue Management for Teamcenter 8.x 7th March 2011 313000 Matthias Ahrens / GmbH The issue To support a few automatic document converting and handling mechanism inside Teamcenter a Job Queue
More information3DVISION MOTION CAPTURE SYSTEM AND THE DYSCO "VIRTUAL LABORATORY" FOR SEISMIC AND VIBRATION TESTS
ATTIVITÀ IN CAMPO SISMICO RECENTI STUDI E SVILUPPI FUTURI Attività in campo sismico. 3DVISION MOTION CAPTURE SYSTEM AND THE DYSCO "VIRTUAL LABORATORY" FOR SEISMIC AND VIBRATION TESTS Gerardo De Canio,,
More informationVantage Product Lifecycle Management
Vantage Product Lifecycle Management Abstract PLM enable companies to manage all information regarding a product, from the initial design and engineering through to manufacture, sourcing, support and run
More informationHow To Use Engineering Data Management At Disy
Engineering Data Management at DESY Talk at the DESY DV Seminar Nov. 11, 2000 Jochen Bürger DESY, IPP Engineering? Engineering Data Management comprises subjects like documentation communication collaborative
More informationCPO Statement of Dassault Syste mes
CPO Statement of Dassault Syste mes Following the prerequisites of ProSTEP ivip s Code of PLM Openness (CPO) IT vendors shall determine and provide a list of their relevant products and the degree of fulfillment
More informationMSC/SuperModel A CAE Data Management and Advanced Structural Modeling System
A CAE Data Management and Advanced Structural Modeling System The MacNeal-Schwendler Corporation 1 12/4/97 1.0 ABSTRACT supports the processes typically used in the design of large structures comprised
More informationWhat s new in Carmenta Server 4.2
What s new in Carmenta Server 4.2 A complete solution for cost-effective visualisation and distribution of GIS data through web services Carmenta Server provides cost-effective technology for building
More informationSUMMARY NOMENCLATURE 1. INTRODUCTION
ADVANCED CAD PLM INTEGRATION IN A NAVAL SHIPBUILDING ENVIRONMENT F. Alonso, SENER Ingeniería y Sistemas S.A., Spain C. Gonzalez, SENER Ingeniería y Sistemas S.A., Spain R. Perez, SENER Ingeniería y Sistemas
More informationIntegration of DB oriented CAD systems with Product Lifecycle Management
Integration of DB oriented CAD systems with Product Lifecycle Management Roberto Penas, SENER Ingeniería y Sistemas S.A., Tres Cantos/Spain, roberto.penas@sener.es Carlos González, SENER Ingeniería y Sistemas
More informationConsulting, Engineering & Managed Service Provider
Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France
More informationPLM and ERP Integration: Business Efficiency and Value A CIMdata Report
PLM and ERP Integration: Business Efficiency and Value A CIMdata Report Mechatronics A CI PLM and ERP Integration: Business Efficiency and Value 1. Introduction The integration of Product Lifecycle Management
More informationData Sheet: Archiving Symantec Enterprise Vault for Microsoft Exchange Store, Manage, and Discover Critical Business Information
Store, Manage, and Discover Critical Business Information Trusted and proven email archiving Enterprise Vault, the industry leader in email and content archiving, enables companies to store, manage, and
More informationPLM software for complex program and system management
I ndustry and C omplex S ystems PLM software for complex program and system management Design, integrate and maintain complex systems Collaborate and exchange on programs and projects Manage changes and
More informationConnectivity Pack for Microsoft Guide
HP Vertica Analytic Database Software Version: 7.0.x Document Release Date: 2/20/2015 Legal Notices Warranty The only warranties for HP products and services are set forth in the express warranty statements
More informationProduct Synthesis. CATIA - Product Engineering Optimizer 2 (PEO) CATIA V5R18
Product Synthesis CATIA - Product Engineering Optimizer 2 (PEO) CATIA V5R18 Product Synthesis CATIA - Product Engineering Optimizer Accelerates design alternatives exploration and optimization according
More informationThank you for downloading one of our ANSYS whitepapers we hope you enjoy it.
Thank you! Thank you for downloading one of our ANSYS whitepapers we hope you enjoy it. Have questions? Need more information? Please don t hesitate to contact us! We have plenty more where this came from.
More informationACE Europe Henrik Weimer. TIM: The first Aras use case in Airbus
ACE Europe Henrik Weimer TIM: The first Aras use case in Airbus Airbus in a Nutshell The PLM at Airbus TIM: Our first ARAS solution ARAS Our Assessment Airbus in a Nutshell The PLM at Airbus TIM: Our first
More informationSharePoint for Engineering Document Management & Control
SharePoint for Engineering Document Management & Control Managing and controlling engineering documents and drawings with SharePoint A white paper by Cadac Organice BV Date: 01-03-2012 Table of contents
More informationAutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook
2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management
More informationBAE Systems Military Air Solutions
Aerospace and defense BAE Systems Military Air Solutions Teamcenter supports aircraft through 50-year lifecycle Product Teamcenter Business initiatives Enterprise data management Business challenges Partnered-support
More informationA PLM Certificate Program Update: Teaching PLM Online Using VMs in the Cloud
A PLM Certificate Program Update: Teaching PLM Online Using VMs in the Cloud A. B. Mueller Department of Computer Graphics Technology Purdue University Abstract Purdue University Department of Computer
More informationDigital Preservation. OAIS Reference Model
Digital Preservation OAIS Reference Model Stephan Strodl, Andreas Rauber Institut für Softwaretechnik und Interaktive Systeme TU Wien http://www.ifs.tuwien.ac.at/dp Aim OAIS model Understanding the functionality
More informationGUIDEBOOK SIEMENS PLM SOFTWARE FOR CONSUMER PACKAGED GOODS
GUIDEBOOK SIEMENS PLM SOFTWARE FOR CONSUMER PACKAGED GOODS Corporate Headquarters Nucleus Research Inc. 100 State Street Boston, MA 02109 Phone: +1 617.720.2000 Nucleus Research Inc. TOPICS Enterprise
More informationMaster Diploma in Product Design and Analysis Course Code Software Used Duration MCADD MD100 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts +
Master Diploma in Product Design and Analysis MCADD MD100 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts + MSP + GD&T 384 MCADD MD101 AutoCAD 2D + Creo + SolidWorks + ANSYS + PPM Concepts + Primavera
More informationLMS Virtual.Lab Realistic Simulation in CATIA V5. Why CAE? Design-Right/First-Time
LMS Virtual.Lab Realistic Simulation in CATIA V5 Why CAE? Design-Right/First-Time LMS Company Background Three Primary Business Areas 2 LMS Engineering Engineering Consulting and Test Services 1 LMS Research
More informationRotorcraft Health Management System (RHMS)
AIAC-11 Eleventh Australian International Aerospace Congress Rotorcraft Health Management System (RHMS) Robab Safa-Bakhsh 1, Dmitry Cherkassky 2 1 The Boeing Company, Phantom Works Philadelphia Center
More informationThe Application of Process Automation and Optimisation in the Rapid Development of New Passenger Vehicles at SAIC Motor
The Application of Process Automation and Optimisation in the Rapid Development of New Passenger Vehicles at SAIC Motor Dave Husson Vehicle CAE Manager, SAIC Motor UK Technical Centre Lowhill Lane, Longbridge,
More informationINTEGRATING BIM AND GIS FOR ASSET MANAGEMENT
INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT Andy Chan MHKIBIM Project Manager Spatial Technology Limited Agenda Introduction of Asset Management Why GIS is not sufficient for Asset Management Data model
More informationData management by Autodesk
Autodesk Vault Workgroup 2015 Data management by Autodesk Autodesk Vault helps design, engineering, and manufacturing workgroups manage Digital Prototyping information. In order to provide Autodesk Productstream
More informationAutomotive CAE Integration.
WHITEPAPER Automotive CAE Integration. Requirements and Evaluation. of Interfaces. 2009 AUDI AG BMW AG Daimler AG Dr. Ing. h. c. F. Porsche AG Volkswagen AG PROSTEP AG Automotive CAE Integration Contribution
More informationMCADD COURSE STRUCTURE
MCADD COURSE STRUCTURE S.No Course code Software used Duration Master Diploma in Product Design and Analysis 1 MCADD MD40 CATIA V5 +NX CAD +NX CAM +Ansys +PPM Concepts +MSP 2010 (mechanical)+gd & T 360
More informationVENDOR-AGNOSTIC EXPLANATIONS AND ADVICE FOR THE INFORMATION TECHNOLOGY BUYER. Evaluating Email Archiving Solutions
P Evaluating Email Archiving Solutions Clipper Notes VENDOR-AGNOSTIC EXPLANATIONS AND ADVICE FOR THE INFORMATION TECHNOLOGY BUYER New in 2007 Report #TCG2007048 March 31, 2007 Evaluating Email Archiving
More informationAdministering the Web Server (IIS) Role of Windows Server 10972B; 5 Days
Lincoln Land Community College Capital City Training Center 130 West Mason Springfield, IL 62702 217-782-7436 www.llcc.edu/cctc Administering the Web Server (IIS) Role of Windows Server 10972B; 5 Days
More informationHow To Create A Cdf Optimisation System
ADVANCED ENGINEERING 4(2010)2, ISSN 1846-5900 INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS Todorov, G.; Ovcharova, J.; Romanov, B. & Kamberov, K. Abstract: The
More information16 TB of Disk Savings and 3 Oracle Applications Modules Retired in 3 Days: EMC IT s Informatica Data Retirement Proof of Concept
16 TB of Disk Savings and 3 Oracle Applications Modules Retired in 3 Days: EMC IT s Informatica Data Retirement Proof of Concept Applied Technology Abstract This white paper illustrates the ability to
More informationE-book Tutorial: MPEG-4 and OpenDocument
Building an Impress Extension for Interactive MPEG-4 Video Conversion BRUNO CARPENTIERI and ROBERTO IANNONE Dipartimento di Informatica Università di Salerno Via S. Allende 84081 Fisciano (SA) ITALY bc@dia.unisa.it
More informationWhite Paper Cybercom & Axiomatics Joint Identity & Access Management (R)evolution
White Paper Cybercom & Axiomatics Joint Identity & Access Management (R)evolution Federation and Attribute Based Access Control Page 2 Realization of the IAM (R)evolution Executive Summary Many organizations
More informationHigh-end FEA pre/postprocessor
Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall
More information3397 American Drive, Unit # 1 Mississauga, Ontario. L4V 1T8 Phone: 905 672 9328 Fax: 905 672 2706
Contact: Robert C. Lansdale Okino Computer Graphics, Inc. Phone 905 672 9328 lansd@okino.com 3397 American Drive, Unit # 1 Mississauga, Ontario. L4V 1T8 Phone: 905 672 9328 Fax: 905 672 2706 Okino Computer
More informationHPC technology and future architecture
HPC technology and future architecture Visual Analysis for Extremely Large-Scale Scientific Computing KGT2 Internal Meeting INRIA France Benoit Lange benoit.lange@inria.fr Toàn Nguyên toan.nguyen@inria.fr
More informationThe STAR Algorithm Integration Team (AIT) Research to Operations Process
The STAR Algorithm Integration Team (AIT) Research to Operations Process Presented by Tom King 1 The Problem Scientists write code that needs to go to operations, but:» Many scientists often prefer interpreted
More informationf o r d e m a n d i n g C F D pre- & post-processing ANSA μετα p i o n e e r i n g software systems www.beta-cae.gr
ANSA μετα p i o n e e r i n g software systems f o r d e m a n d i n g C F D pre- & post-processing TM www.beta-cae.gr ANSA with its powerful functionality provides high efficiency solutions for CFD applications.
More informationFocus on efficiency in Digital Factory
FASTSUITE Edition 2 Focus on efficiency in Digital Factory Bring value to your production with FASTSUITE Edition 2. The new benchmark for Digital Factory solutions closes the gap between engineering and
More informationGTAC Services Asia Pacific
Siemens PLM Software GTAC Services Asia Pacific A guide to support services from the Siemens PLM Software Global Technical Access Center (GTAC) Asia Pacific siemens.com/gtac Contents The value of software
More informationDATA VALIDATION AND CLEANSING
AP12 Data Warehouse Implementation: Where We Are 1 Year Later Evangeline Collado, University of Central Florida, Orlando, FL Linda S. Sullivan, University of Central Florida, Orlando, FL ABSTRACT There
More informationReport Writer's Guide Release 14.1
Prime Report Writer's Guide Release 14.1 March 2014 Contents Understanding and Working With the Reporting User's Schema... 5 Understanding The Reporting User's Schema... 5 Working With the Reporting User's
More information1 Introduction FEDERATED THROUGH-LIFE SUPPORT, ENABLING ONLINE INTEGRATION OF SYSTEMS WITHIN THE PLM DOMAIN. Abstract. Jonas Rosén
1 st Nordic Conference on Product Lifecycle Management - NordPLM 06, Göteborg, January 25-26 2006 FEDERATED THROUGH-LIFE SUPPORT, ENABLING ONLINE INTEGRATION OF SYSTEMS WITHIN THE PLM DOMAIN Jonas Rosén
More informationME 521 Computer Aided Design. 1. Introduction to CAD
Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for
More informationThe CLM Platform from STAR
The CLM Platform from STAR Branch solutions for your Corporate Language Management STAR Group Your single-source partner for corporate product communication Every flight is a new experience and yet it
More informationComputer Aided Design and Drafting (CAD)
Oakland Community College 2015-2016 Catalog 1 Computer Aided Design and Drafting (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well as
More informationPro/INTRALINK 10.0. Curriculum Guide
Pro/INTRALINK 10.0 Curriculum Guide Live Classroom Curriculum Guide Introduction to Pro/INTRALINK 10.0 Business Administration of Pro/INTRALINK 10.0 Update to Windchill 10.0 for System Administrators System
More informationSan Jose State University
San Jose State University Fall 2011 CMPE 272: Enterprise Software Overview Project: Date: 5/9/2011 Under guidance of Professor, Rakesh Ranjan Submitted by, Team Titans Jaydeep Patel (007521007) Zankhana
More informationThis course will also teach how to create various kinds of dashboards using Reporting Services.
Implementing and Maintaining Microsoft SQL Server 2008 Reporting Services Length : 3 Days (24 Hours) Language(s) : English Audience(s) : IT Professionals Level : 200 Technology : Microsoft SQL Server 2008
More informationProperty & Casualty Insurance Solutions from CCS Technology Solutions
Property & Casualty Insurance Solutions from CCS Technology Solution presents OneTimePortal (Powered by WEBSPHERE), Web-based software platform for property and casualty insurers that are seeking to reduce
More informationContents. Introduction... 1
Managed SQL Server 2005 Deployments with CA ERwin Data Modeler and Microsoft Visual Studio Team Edition for Database Professionals Helping to Develop, Model, and Maintain Complex Database Architectures
More informationTop 5 Reasons to Upgrade to edocs DM 5.3
Top 5 Reasons to Upgrade to edocs DM 5.3 Larry Roy Director edocs Product Management December 2 nd, 2010 Agenda Lowering Total Cost of Ownership Unleash the power of Microsoft Office 2010 Accelerate your
More informationOn One Approach to Scientific CAD/CAE Software Developing Process
ISSN (Online): 1694-0784 ISSN (Print): 1694-0814 9 On One Approach to Scientific CAD/CAE Software Developing Process George Sergia 1, Alexander Demurov 2, George Petrosyan 3, Roman Jobava 4 1 Exact and
More informationANSYS EKM Overview. What is EKM?
ANSYS EKM Overview What is EKM? ANSYS EKM is a simulation process and data management (SPDM) software system that allows engineers at all levels of an organization to effectively manage the data and processes
More information