Penetration cone 1/10 mm 290 ASTM D 217/C Power factor / Tan 100kHz
|
|
|
- Curtis Hood
- 4 years ago
- Views:
Transcription
1 G4J - gel for prefilled joints G4J is a Polymeric Gel on elastomeric cross linked base, chemically inert and absolutely no toxic. G4J is UL Recognized Component For additional information see the UL Online Certifications Directory at G4J is used for the filling of all RAYTECH PREFILLED joints: HAPPY and HAPPY JOINT in all packing options; GEL BOX LINE (ISAAC, PASCAL, WATT, JOULE, KELVIN) in all packing options; GEL COVER LINE (OHM, BAR, MAMMUT GEL COVER) in all packing options; NANO JOINT, NANO MAM and NANO FOR, BRAVO and MINI BRAVO, LITTLE JOINT (BARNEY, FRED, DINO, BARNEY Y, FRED Y, BOB4) in all packing options, READY BOX IP68, FOX BOX SUPER CLIK, RAPID JOINT IP68, RAPIDINO IP68, KING JOINT, RAPID JOINT, CLIK FIRE, RAPID JOINT IP68 System Fast RP and RAPID JOINT System Fast RP, GALACTIC MAMMUT SECURITY, GALACTIC NANO JOINT, MCA UNIVERSAL IP68 and MCA-Y. PROPERTY TEST METHOD / NOTE UNIT TYPICAL VALUE Physical Aspect - - Gel Colour - - Clear and transparent Initial Hardness Penetration cone 1/10 mm 340 ASTM D 217/C After aging hardness Penetration cone 1/10 mm 290 ASTM D 217/C Hardness - 0 SHORE 00 Density g/cc 0,97 Thermal conductivity - W/mK Approx 0,2 Continuous working temperature - C from -60 to +150 Installation temperature (related to joints) C from -40 to + 50 Water absorption after 30 days immersion - % << 0,05% Flammability Flame class UL 94 - HB Flammability point - C >200 Auto-ignition temperature - C >400 Electrical Dielectric strength - kv/mm 25 Dielectric constant / 100kHz Power factor / Tan 100kHz - 0,0025 0,00015 Volume resistivity - Ω cm 2,4 x 10exp 15 Degree of protection EN IPX8, IP68 (Depending on the envelopes) TDS_G4J_gel_prefilled - 1/2 TDS_LITTLE_JOINT_X - 17/10/2018-3/10
2 EXPOSITION TO CHEMICALS OF CROSSLINKED PRODUCT Salt, salty water etc Sea water or chlorine environments (swimming pools etc.) Inorganic acids in water solutions Strong, pure acids or alkaline (not in solution) Alkaline solutions and vinegar Solutions of hydrocarbons in water Pure hydrocarbons have no adverse effect. have no adverse effect. have not visible effects. The exposition has to be avoided, especially at high temperature. could bring, after a long time of exposition, to a softening of the external surface. could give, after a long exposition at quite high temperatures, the hardening of the external surface of the products; of course nothing happens for temporary expositions Permanent immersion in strong and pure hydrocarbons has to be avoided. SHELF LIFE The product has unlimited shelf life, if stored and used according to the relevant instructions. Settimo Milanese, 10/2018 TDS_G4J_gel_prefilled - 2/2 TDS_LITTLE_JOINT_X - 17/10/2018-4/10
3 TDS-RMP001 POLYPROPYLÈNE AUTO-EXTINGUIBLE - UL94 V2 Raw material for the moulding of the following lines of enclosures: Materia prima per lo stampaggio dei seguenti accessori: Matière première pour la fabrication des suivantes accessoires: Gel Box Line, (ISAAC, PASCAL, WATT, JOULE, KELVIN), HAPPY with coloured casing ; Gel Box Line, (ISAAC, PASCAL, WATT, JOULE, KELVIN), HAPPY con involucri colorati ; Gel Box Line, (ISAAC, PASCAL, WATT, JOULE, KELVIN), HAPPY avec boites colorées ; MAMMUT GEL COVER NANO JOINT, NANO MAM, NANO FOR LITTLE JOINT (BARNEY, FRED, DINO, BARNEY Y, FRED Y, BOB4) SUPER CLIK RAPID JOINT IP68, RAPIDINO IP68 KING JOINT RAPID JOINT CLIK FIRE MAGIC JOINT FIRE RAPID JOINT L RIP68 e RAPID JOINT RP GALACTIC MAMMUT SECURITY GALACTIC NANO JOINT 4 MCA Universal IP68 MCA-Y PROPERTIES Proprietà - Proprietés METHOD Metodo Méthode UNIT Unità Unité TYPICAL VALUE Valore tipico Valeur typique GENERAL generali - général Density Densità Densité Melt volume rate Tasso volumetrico allo stato fuso Débit volumique à l état fondu 230 C/2.16Kg Linear modul shrinkage Ritiro lineare Rétraite linéaire Transversal mould shrinkage Ritiro trasversale Rétraite transversale Water adsorption (24h-23 C) Assorbimento acqua (24h-23 C) Absorption de l eau ASTM D-792 g/ml 0.93 ISO-1133 cm 3 /10 min 16.0 ASTM D-955 % 1.5 ASTM D-955 % 1.5 ASTM D-570 % 0.02 THERMAL Termiche- Thermique Vicat B ASTM D-1525 C 80 HDT A ASTM D-648 C 55 Pag. 1 / 2 TDS_LITTLE_JOINT_X - 17/10/2018-5/10
4 PROPERTIES Proprietà - Proprietés METHOD Metodo Méthode UNIT Unità Unité TYPICAL VALUE Valore tipico Valeur typique MECHANICAL Meccaniche - Mécanique IZOD impact strength, notched IZOD con intaglio IZOD avec entaille IZOD impact strength, unnotched IZOD senza intaglio IZOD sans entaille Tensile strength Carico a trazione Charge à la traction Tensile elongation at break Allungamento a rottura Allongement à rupture Tensile modulus Modulo elastico trazione Module d élasticité traction Flexural modulus Modulo elastico a flessione Module d élasticité à flexion Flexural strenght Carico massimo a flessione Charge maxime à flexion ISO-180/1A KJ/m 2 9 ISO-180/1U KJ/m 2 NB ASTM D-638 MPa 20 ASTM D-638 % >100 ASTM D-638 MPa 1000 ASTM D-790 MPa - ASTM D-790 MPa - ELECTRICAL elettriche - eléctrique Comparative tracking index CTI Indice d alignement comparatif Surface resistivity Resistività di superficie Resistivité de surface IEC V - - Ohm - FLAME RESISTANCE - Resistenza alla fiamma Resistivité à la flamme Flame resistance (3.2 mm) Resistenza alla fiamma (3.2 mm) Resistivité à la flamme (3.2 mm) Flame resistance (1.6 mm) Resistenza alla fiamma (1.6 mm) Resistivité à la flamme (1.6 mm) Flame resistance (0.8 mm) Resistenza alla fiamma (0.8 mm) Resistivité à la flamme (0.8 mm) UL94 - V2 UL94 - V2 UL GWFI IEC C/mm - GWIT IEC C/mm - Settimo Milanese, 10/2018 Pag. 2 / 2 TDS_LITTLE_JOINT_X - 17/10/2018-6/10
5 INSULATED CONNECTION BLOCK Item Shape Description Cable Section Range (mm 2 ) Dimensions (mm) Part of Jointing Kit MORSETTIERA L16 MORSETTIERA L25 MORSETTIERA Y6 MORSETTIERA Y16 INSULATED CONNECTION BLOCK L 5x16 for in line connections up to 5 core Grey polypropylene separator, with pre-assembled brass connectors with steel screw INSULATED CONNECTION BLOCK L 5x25 for in line connections up to 5 core Grey polypropylene separator, screw (Allen key size 2 not included) INSULATED CONNECTION BLOCK Y 5x6 for branch connections up to 5 core Grey polypropylene separator, screw (Allen key size 2 not included) INSULATED CONNECTION BLOCK Y 5x16 for branch connections up to 5 core Grey polypropylene separator, screw (Allen key size 6 not included) in line /straight branch L or Ø W H 1,5-16 na na ,5-6 1, , KING JOINT 0, L6 & L10 RAPID JOINT L1,5-IP68 & L6-IP68 WONDER JOINT SP L16 MAGIC P JOINT SP L16 MAGIC JOINT SP L16 RAYCAST SP L16 KING JOINT L25 RAPID JOINT L10-IP68 WONDER JOINT SP L25 MAGIC P JOINT SP L25 MAGIC JOINT SP L25 RAYCAST SP L25 KING JOINT Y6 WONDER JOINT SP Y6 MAGIC P JOINT SP Y6 MAGIC JOINT SP Y6 RAYCAST SP D6 KING JOINT Y16 WONDER JOINT SP Y16 MAGIC P JOINT SP Y16 MAGIC JOINT SP Y16 RAYCAST SP D16 Selling Unit (SU) MORSETTIERA T INSULATED CONNECTION BLOCK Y 4x35 for branch connections up to 4 core Black polypropylene separator, screw (Allen key size 6 not included) , KING JOINT Y35 MAGIC P JOINT SP T35 MAGIC JOINT SP T35 RAYCAST SP T 35 SUPER CLIK 3 5 PCS MORSETTIERA B1 INSULATED CONNECTION BLOCK LY 1x6 Red polypropylene separator, with pre-assembled brass connector with allen screw (Allen key size 2 not included) 1 x 1,5-6 1 x 1, BRAVO 1-6 MINIBRAVO 1 BARNEY Y RAPIDINO IP68 Y1 30 PCS TDS_MORSETTIERE_CONNECTION BLOCKS 1/3 TDS_LITTLE_JOINT_X - 17/10/2018-7/10
6 INSULATED CONNECTION BLOCK Item Shape Description Cable Section Range (mm 2 ) Dimensions (mm) Part of Jointing Kit in line /straight branch L or Ø W H Selling Unit (SU) MORSETTIERA B2 INSULATED CONNECTION BLOCK LY 2x6 Red polypropylene separator, screw (Allen key size 2 not included) 2 x 1,5-6 2 x 1, MINIBRAVO 2 30 PCS MORSETTIERA B3 INSULATED CONNECTION BLOCK LY 3x6 Red polypropylene separator, with preassembled brass connectors with allen screw (Allen key size 2 not included) 3 x 1,5-6 3 x 1, BRAVO 3-6 MINIBRAVO 3 FRED Y RAPIDINO IP68 Y3 BOB4 30 PCS MORSETTIERA 3-6 INSULATED CONNECTION BLOCK LY 3x6 up to 3 cores Red polypropylene separator, with pre-assembled brass connectors with steel screw Straight: 1,5-6 Main: 4 Branch: 2, ,5 18 SUPER CLIK 0 MORSETTIERA 4-6 INSULATED CONNECTION BLOCK LY 4x6 up to 4 cores Red polypropylene separator, with pre-assembled brass connectors with steel screw. Straight: 1,5-6 Main: 4 Branch: 2, ,5 17,2 DINO RAPIDINO IP68 L4 - TDS_MORSETTIERE_CONNECTION BLOCKS 2/3 TDS_LITTLE_JOINT_X - 17/10/2018-8/10
7 INSULATED CONNECTION BLOCK Item Shape Description Cable Section Range (mm 2 ) Dimensions (mm) Part of Jointing Kit in line /straight branch L or Ø W H Selling Unit (SU) MORSETTIERA 5-6 INSULATED CONNECTION BLOCK LY 5x6 up to 5 cores Red polypropylene separator, with preassembled brass connectors with steel screw Straight: 1,5-6 Main: 4 Branch: 2, ,5 18 SUPER CLIK 1 MORSETTIERA 5-16 INSULATED CONNECTION BLOCK LY 5x16 mm 2 up to 5 cores Red polypropylene separator, with preassembled brass connectors with steel screw Straight: 4-16 Main: 10 Branch: 6 38,5 28,5 23 SUPER CLIK 2 MORSETTIERA 3x6 INSULATED CONNECTION BLOCK LY 3x6 mm 2 Grey polypropylene separator, with preassembled brass connectors with allen screw (Allen key size 2 not included) 3 x 1,5-6 3 x 1, READY BOX IP68 90 MORSETTIERA 5x6 INSULATED CONNECTION BLOCK LY 5x6 mm 2 Grey polypropylene separator, with preassembled brass connectors with allen screw (Allen key size 2 not included) 5 x 1,5-6 5 x 1, READY BOX IP Settimo Milanese, 10/2018 TDS_MORSETTIERE_CONNECTION BLOCKS 3/3 TDS_LITTLE_JOINT_X - 17/10/2018-9/10
8 GEL CONNECTION IP68 CABLE GLANDS METRIC PITCH The cable glands in LITTLE JOINT (BARNEY, FRED, DINO, BARNEY Y, FRED Y, BOB4), MINIRAPID (RAPIDINO IP68) and READY BOX IP68, FOX BOX accessories are made of a self-extinguishing compound, with high resistance to UV radiation and to ageing, also in the most severe conditions Item Pitch Ø cable range Ø tubes Part of the kit IP68 METRICO Min (mm) Max (mm) - BARNEY, BARNEY Y, DADO M16 M16X RAPIDINO IP68 L2, RAPIDINO IP68 Y1 - FRED, FRED Y, BOB4, DADO M20 M20X RAPIDINO IP68 L3, RAPIDINO IP68 Y3 DADO M25 M25X DINO, RAPIDINO IP68 L4 READY BOX IP68 120, BULLONE (hole Ø 21) M25X1.5 6* 18 16*, 20 READY BOX IP68 90, FOX BOX *for cable up to 13 mm, use the adaptors included in the kit * use the adaptors included in the kit PROPERTY TEST METHOD UNIT TYPICAL VALUE Protection degree IEC IP 68 MECHANICAL Tensile strength ASTM D-638 MPa 20 Tensile elongation at break ASTM D-638 % >100 Tensile modulus ASTM D-638 MPa 1000 RESISTENZA ALLA FIAMMA Flame resistance (3.2 mm) UL94 - V2 Flame resistance (1.6 mm) UL94 - V2 Flame resistance (0.8 mm) UL94 - V2 Settimo Milanese, 10/2018 TDS_LITTLE_JOINT_X - 17/10/ /10
FDM Material Properties
Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,
Engineering Plastics Technical Presentation
Engineering Plastics Technical Presentation Product Overview TAROMID A PA resin Available in different grades, UV and heat stabilized, glass fibres reinforced (also high impact), with glass beads, mineral
Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
Physical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
Stereolithography Material Properties
Details Stereolithography Standard lead time: Standard accuracy: Maximum part dimensions: From 2 working days, depending on the size of the parts and the number of components. Standard stereolithography
Stereolithography Material Properties
Details Stereolithography Standard lead time: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: From 2 days, depending on the size of the parts and the number of components.
TECHNICAL DATA SHEET GRILON BG-15 S
TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy
C A B L E P R O T E C T I O N
Safe cable protection! Elematic Cabling Systems produces in own plants a wide range of products for the cable protection, such as wiring spirals, insulated tubing, heat shrinkable tubing, etc. These products
DuPont Crastin. thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE
DuPont Crastin thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE DuPont Crastin thermoplastic polyester resin DuPont Crastin PBT (polybutylene terephthalate) thermoplastic polyester offers exceptional
HOSTAFORM C 9021 POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;
SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA)
1) Product Description: SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) General Purpose ABS, SD 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high
High-Performance Polymers for. Automotive E/E Systems SPECIALTY
High-Performance Polymers for Automotive E/E Systems SPECIALTY POLYMERS Get Connected with Solvay Solvay offers the industry s broadest selection of high-performance plastics for automotive electrical/electronic
TECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets
Pag. 1/8 TECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Electrically conductive silicone gaskets are manufactured in different standard profiles and upon client request, in silicone and fluorosilicone,
INFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
PLEXIGLAS SUNACTIVE GS. For a Better Feeling
PLEXIGLAS SUNACTIVE GS For a Better Feeling PLEXIGLAS SUNACTIVE GS For a Better Feeling A perfect tan and a feeling of wellbeing are two important sales factors for tanning beds. To enable you to convincingly
Araldite CY 5923 100 pbw Hardener HY 5924 80 pbw Filler Silica flour 270 pbw
Vantico Ltd Electronic Polymers Heavy Electrical Araldite Casting Resin System Araldite CY 5923 100 pbw Hardener HY 5924 80 pbw Filler Silica flour 270 pbw Liquid, hot-curing casting resin system for producing
PRODUCTS. Ten 47 Ltd 2B Frances Industrial Park Kirkcaldy Fife. UK KY1 2XZ
+ Ten 47 CABLEGUARD PRODUCTS Ten 47 Ltd 2B Frances Industrial Park Kirkcaldy Fife UK KY1 2XZ Tel: +44 (0) 1592 655725 Fax: +44 (0) 1592 651049 Email: sales@cableguardeu Web: wwwcableguardeu Index Black
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
1.5. UL flammability ratings. *Nylon 6.6 = Polyamide 6.6 is Halogen-free and Silicone-free.
1.5 UL flammability ratings WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 191 477 5371 TEL 0044 117 977 4647 FAX 0044 117 977 5582 WWW.THORNEANDDERRICK.CO.UK Flammability ratings
T A B L E T 1 T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A
T A B L E T 1 1 of 7 Tests & Inspection Cable PCUT & PCUT-A (Table T1) T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A No. Test Scale MOC Requirements G 20:10:001:01 Defined Test
How To Build A Low Voltage Capacitor Lvcp
Low Voltage Capacitor LVCP The new choice for Power Factor Correction LVCP : the new choice for Power Factor Correction The LVCP is a compact and powerful capacitor. It offers high modularity, unmatched
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Design Guide Module III. Delrin acetal resin. Start with DuPont
Design Guide Module III Delrin acetal resin Start with DuPont Table of Contents Chapter 1 General Information.................................. 1 Description........................................ 2 Applications.......................................
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
Zytel. DuPont. Product guide and properties. nylon resin
DuPont nylon resin Zytel Product guide and properties 1 2 4 3 Registered trademarks of E.I. du Pont de Nemours and Company The miracles of science is a trademark of E.I. du Pont de Nemours and Company
KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET
1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound
_sbiancato. _fumé. 15,1x90,6-6 x36 Naturale/Rettificato - Matte/Rectified. 15,1x90,6-6 x36. _mosaico stripes in fogli 35x59-14 x23
Essential _fumé _sbiancato _mosaico stripes in fogli 35x59-14 x23 _frassino Esterno R11/Rettificato Outdoor R11/Rectified _noce 20,13x120,8-8 x48 20,13x120,8-8 x48 _frassino 20,13x120,8-8 x48 ES201R Sbiancato
Quality Assurance Plan
Quality Assurance Plan AGEPOL Reference Manual Provisions specific to the business Ratchaburi Phase 2 ID_7391 Walkways & Ladders Ratchaburi Phase 2 : QAP 1.1 Production of GRP sections : Extract from the
Products for Effective Asset Management
HellermannTyton RFID SOLUTIONS Products for Effective Asset Management Asset Management There is an ever increasing need by business to ensure the traceability and record-keeping of calibration, location
Construction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department
INABENSA INABENSA Technical Specification Fire Blanket Firemaster Fire Protection-Cables Tray Fire Protection Department Blanket is a non-combustible flexible blanket made by alkaline earth silicate fibers,
SOLAR SOLUTIONS BONDED MOUNTING TECHNOLOGY. DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil
SOLAR BONDED MOUNTING TECHNOLOGY DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil ADDED VALUE BY BONDING OF MODULES TO MOUNTING SYSTEMS SUITABLE IN PRODUCTION AND ON-SITE NOWADAYS PHOTOVOLTAIC
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
CLI CableLine Laser-printed Identification Cable markers and wire markers. Product information
CLI CableLine Laser-printed Identification Cable markers and wire markers Product information CLI CableLine Laser-printed Identification Introduction 4 s 5 Weidmüller tests and test procedures 6 Selection
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
Enclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
DuPont Kapton HN. polyimide film
DuPont Kapton HN polyimide film Technical Data Sheet DuPont Kapton HN general-purpose film has been used successfully in applications at temperatures as low as -269 C (-452 F) and as high as 400 C (752
Low Pressure Molding. Macromelt
Low Pressure Molding Macromelt LOW PRESSURE INSERT MOLDING Henkel, the global leader in adhesives, and The Cavist Corporation, application engineering and equipment experts in the field of low pressure
ENERGY. TECSUN DUO (PV) Twin Cables for Photovoltaics
ENERGY TECSUN DUO (PV) Twin Cables for Photovoltaics Auswahlkriterien Manufacturer Trademark Approvals Application Prysmian Kabel und Systeme GmbH Kabel- und Leitungswerk Neustadt bei Coburg / Germany
Flame Retardants and the Evolving Regulatory Landscape
THERM0PLASTIC ELASTOMERS STRUCTURAL WEAR CONDUCTIVE COLOR FLAME RETARDANT Flame Retardants and the Evolving Regulatory Landscape Derek LaRock Product Development Engineer Flame Retardant Products Overview
Slow Cure Thermal Conductive Adhesive 8329TCS Technical Data Sheet 8329TCS
Technical Data Sheet Description The Slow Cure is an electronically insulating epoxy that combines long working time and high conductivity with ease of use. It has a convenient 1-to-1 mix ratio and 4 hours
BETON Crete. By Terratinta Ceramiche R
BETON Crete By Terratinta Ceramiche R BETON Crete BETON Crete Betoncrete. Essentially, design. Minimal Colonial PAGE 8 PAGE 12 Shabby Industrial PAGE 14 PAGE 18 Betoncrete is born from a unique combination
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
DENSO WATERPROOFING SYSTEMS
DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Linkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. SPECIFICALLY TO BE USED TO INSTALL FLOW & RETURN PIPES FROM SOLAR PANEL TO STORAGE TANK
2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. Flexible stainless steel pipe Solar UV resistant protective sheath Break joint for easy separation Integrated two-core sensor cable Closed cell elastomeric foam
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 0, RS 8 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 0A types LED indication Clip-on IP 20 protection
AG 9-4 ArborGard+ tree trunk protector
AG 9-4 ArborGard+ tree trunk protector Specified ArborGard is a tree trunk protector to prevent damage by string trimmers, lawn mowers and rodents. Single protector fits trunks up to 4" in diameter, join
The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
Electrical Safety Products
Electrical Safety Products Trelleborg Electrical Safety Products A safe working environment is important in all industries, but in the electrical generation and supply industry, it is paramount. Trelleborg
Prestige 3D Dado & Skirting Technical
Prestige 3D Dado & Skirting Technical 693 technical hotline +44 (0)268 5637 Standards and approvals The Prestige 3D System is manufactured in accordance with the requirements of S EN 50085-: 05 and S 4662:
Product Guide Specification
Stabilit America, Inc., dba Glasteel June 2005 285 Industrial Drive Moscow, Tennessee 38057 Toll Free (800) 238-5546 Phone (901) 877-3010 Fax (901) 877-1388 Web Site www.glasteel.com Product Guide Specification
SOLENOID VALVE FOR REFRIGERATING SYSTEMS
SOLENOID VALVE FOR REFRIGERATING SYSTEMS FROM UALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel uality Range of Products
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
Electrical Engineering
Advanced Materials Electrical Engineering Selector Guide About Huntsman Advanced Materials Huntsman Advanced Materials is a leading global supplier of synthetic and formulated polymer systems for customers
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
SEISMIC VELOCITY TRANSDUCER T1-40
SEISMIC VELOCITY TRANSDUCER T1-40 Measurement of Omnidirectional Absolute Vibrations Certified according to ATEX 94/9/CE directive OPERATION Transducer T1-40 serves for seismic measurement of the absolute
Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION
Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two
Certification of Plastic Materials
VDE Testing and Certification Institute Merianstraße 28 D-63069 Offenbach A Certification of Plastic Materials Glow-Wire Flammability Index GWFI Glow-Wire Ignition Temperature GWIT Comparative Tracking
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Section 1 General Information... 4. Description... 4 Properties and Characteristics... 4 Processing... 5 Applications... 5
Table of Contents Section 1 General Information......................................... 4 Description........................................................................ 4 Properties and Characteristics........................................................
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
How To Read A Pipe From A Sensor
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
RJF TV Ethernet connection system for harsh environment
RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz. Quit
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz Quit Theory and Practice of Wear Definition In materials science, wear is the erosion of material from a solid
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Araldite LY 3505* / Hardeners XB 3403* / Hardener XB 3404-1* / Aradur 3405*
Advanced Materials Araldite * / Hardeners * / Hardener * / Aradur 3405* WARM CURING EPOXY SYSTEMS Araldite is an epoxy resin Hardeners, and Aradur 3405 are based on aliphatic polyamines APPLICATIONS PROPERTIES
RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. 0.
Receiver AC-RX2/CS RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. Pin-out 38.1 3 Component Side 1 2 3 7 11 13 14 15
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin Data Sheet April 2013 Description 3M Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Metal Injection Molding (MIM) of components made of Titanium and its alloys
Metal Injection Molding (MIM) of components made of Titanium and its alloys 1 Presentation content Introduction to Metal Injection Molding (MIM) Technology - explaination Products - examples Company brief
Selective Laser Sintering of Duraform TM Polyamide with Small-Scale Features
Selective Laser Sintering of Duraform TM Polyamide with Small-Scale Features Vinay Sriram, Kristin Wood, David Bourell and Joseph J Beaman Department of Mechanical Engineering Laboratory of Freeform Fabrication
for Multifunctional Plastics
Carbon Nanostructure Enhanced Reinforcements for Multifunctional Plastics November 22nd, 2012 Philippe Pardo INNOV DAYS _ Dijon(France) LES NANOMATERIAUX EN PLASTURGIE Owens Corning at a Glance Founded
Cable ladder installation at S.C.M. Chemicals Limited s titanium dioxide Plant in Western Australia
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables.
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Data Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
Temperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
PETRA P219 COLOUR MATERIAL. 6515041 Nylon PA 651504A Policarbonato PC SIZE
SEATS MODEL PETRA P219 COLOUR Grigio scuro - Dark grey Grigio chiaro - Light grey RAL 7037 RAL 7038 Blu - Blue RAL 5015 6415046 Nylon PA 651504C Policarbonato PC MATERIAL 6515041 Nylon PA 651504A Policarbonato
Product Information PA 2200. General Properties. Thermal properties of sintered parts. PA 2200 is a non-filled powder on basis of PA 12.
PA 2200 PA 2200 is a non-filled powder on basis of PA 12. General Properties Property Units Water absorption ISO 62 / DIN 53495 100 C, saturation in water % 1.93 23 C, 96% RF % 1.33 23 C, 50% RF % 0.52
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
Stress Strain Relationships
Stress Strain Relationships Tensile Testing One basic ingredient in the study of the mechanics of deformable bodies is the resistive properties of materials. These properties relate the stresses to the
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
12 Fibre MTP Jumper, MTP (non-pinned) to MTP (pinned)
1 1 9.41 115 0 Patch cables are used 143 12 Fibre MTP Jumper, MTP (non-pinned) to Patch cables are used for non -permanent connections between patch panels, transmission equipment, etc. Pre -assembled
How To Test For Premer Retardant
TEST REPORT NEBS COMPLIANCE CHOMERICS PREMIER CONDUCTIVE PLASTIC Prepared by: CHOMERICS R&D 84 DRAGON COURT WOBURN, MA 01801 Test Report Number: TR 1007 EN 0206 Chomerics Approved Signatory: This report
Rods and Tubes. Technical Information PLEXIGLAS GS/XT. PLEXIGLAS XT rods and tubes exhibit the following features: Product
Technical Information PLEXIGLAS GS/XT Rods and Tubes Product PLEXIGLAS XT rods and tubes are the clearest extruded tubes on the market today delivering brilliant quality, superior performance, and durability.
Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment