Objectives To identify and propose improvements on aircraft maintenance process focusing on solid waste generation reduction.
|
|
- Erick Chapman
- 8 years ago
- Views:
Transcription
1 Objectives To identify and propose improvements on aircraft maintenance process focusing on solid waste generation reduction. To establish the integration of Six Sigma, Lean Manufacturing and Cleaner Production to adress the root causes priorization. Ensure the criticality reduction on environmental aspects.
2 Opportunities Opportunities of environmental impacts mitigation on maintenance include oils, contaminated parts, metals, paint sludge and other s.
3 Opportunities Market aviation has demonstrated in recent years a exponential growth above 4,4%. Every process or equipment has a normal curve of deterioration increasing waste generation in long term. Maintenance wastes has a important participation in the total cost and environmental impacts from those companies.
4 Methodology Applied Six Sigma aims by means of tools quality, reduce variations in the process and thus minimize the generation of flaws and defects. The lean manufacturing focus on the removal of seven most common types of losses in the process that generate costs to the company. The unification of these methods to cleaner production was employed to minimize the generation of waste at source.
5 Methodology Applied Six Sigma Six Sigma focus on process variation reduction. Stage Six Sigma Tools Potencial Results Definition Measure Analysis Improvement Control Voice of the customer, pareto and trend charts. Pareto, flow mapping, fishbone, control chart and brainstorming. Control Chart, DOE, priorization tool. 5W 2H, KAIZEN events. Control Chart, Pareto, Trend charts. Prioritization of waste disposal for analysis. Waste identification / processes with the greatest environmental impact for prioritization Identification of root causes of major disposals processes. Implement the improvements identified in the analysis phase in order to reduce waste generation. Monitoring and maintaining the new level of waste generation in the process.
6 Methodology Applied Lean Manufacturing Lean focus on seven wastes elimination. Excess inventory Wastes Produce above needs Unnecessary transport of people and materials Unnecessary waiting of people and materials Unnecessary movement of people Unnecessary processing Defects /rework Integration with cleaner production Reduction of waste generation by expired products. Minimizing the generation of waste at source. Reduction of waste generation by winning products. Minimizing the use of materials. Reduced consumption of electricity /fuel and others energy powers. Reducing the emission of pollutants. Minimizing the generation of waste at source. Minimizing the risk of waste generation by maturity or incorrect disposal of materials. Reduction in the consumption of fuel and energy. Minimization of waste generation. Reduced consumption of electricity / fuel and other energy sources. Minimizing the generation and disposal of waste due to poor product quality. Reducing consumption of raw materials. Eliminating the generation of waste at source
7 Methodology Applied The project was based on the folowing steps and it was developed with a functional team. The lean and six sigma methodologies were adopted to identify opportunities to mitigate the generation of waste at source, within the model implementation of cleaner production.
8 Scope Airline Brazilian company with about 120 aircrafts (Boeing /800). Aircrafts corrective and preventive maintenance process. Waste treatment and disposal are performed according to standard ABNT NBR Scope include solid waste on aircraft maintenance process and not include other s.
9 Process Mapping By the use o process mapping was possible to visualize the main process opportunities.
10 Brainstorming The brainstorming helps team to identify the opportunities of environmental mitigation. INPUTS IPE, Clean cloths, chemicals. Oil / Fluid, blankets absorbent. Metallic replacement parts or not. Rubbers and hoses. Cardboard, paper, taper. Sandpaper, fiberglass. Batteries, electronics (lamps, cables). OUTPUTS Contaminated IPE, contaminated rags. Remains of products. Chemical, oil, fluids and contaminated cans. Blankets contaminated absorbent. Metallic and non-metallic parts for disposal. Rubber hoses and disposal. Recyclable paper, cardboard, plastic, metal. Not recyclable: tape Sandpaper (sanding disc) used, fiberglass. Rubbers and hoses. Batteries for disposal. Electronics (lamps, electric cables).
11 Root Cause Priorization It was established a priorization tool considering the impact of the waste on Lean, Six Sigma and level of cleaner production.
12 Root Cause Priorization Principles root causes identified on priorization. Waste Six Sigma Level Lean Manufacturin Cleaner Prod. Level Plastic packaging Contaminated IPE Sandpaper (sanding disc) used Remains of products. chemical, oil, fluids and contaminated cans. Score Paint sludge Ink cartridges for disposal Contaminated rags Paper / cardboard Metallic and non-metallic parts Electronics (lamps, electric cables
13 Action Plan It was identified actions focused on environmental aspects reduction as: Procedures changes; Equipments changes; Change in inventory management and consignment shopping; KANBAN Implementation; New area for preparation of solutions
14 Results With the actions proposed implemented, the environment impact will reduce until 40%.
15
Sustainability and Lean Six Sigma
Sustainability and Lean Six Sigma 22 March 2006 Antonia Giardina Assistant Secretary of the Army for Installations & Environment antonia.giardina@us.army.mil Overview Lean Lean Six Sigma (LSS) Overview
More informationGreening Our Future By Educating Tomorrow s Workforce. Module 2: Lean Manufacturing and the Environment
Greening Our Future By Educating Tomorrow s Workforce Module 2: Lean Manufacturing and the Environment 11/16/2011 Module 2: Lean Manufacturing and the Environment What You Will Learn From This Module:
More informationGood Housekeeping BMP
E.1. Good Housekeeping BMP Sweep or vacuum shops floor frequently. Use mopping as an alternative to hosing down work areas. Spot clean any spilled oil or fluids using absorbents or rags. Use dry cleanup
More informationModule 5: Objectives And Targets
Module 5: Objectives And Targets Guidance...5-2 Figure 5-1: Considerations for Developing Objectives and Targets...5-3 Tools...5-5 Tool 5-1: Objectives and Targets Worksheet...5-5 Tool 5-2: Sample Procedure
More informationCopyright 2010-2011 PEOPLECERT Int. Ltd and IASSC
PEOPLECERT - Personnel Certification Body 3 Korai st., 105 64 Athens, Greece, Tel.: +30 210 372 9100, Fax: +30 210 372 9101, e-mail: info@peoplecert.org, www.peoplecert.org Copyright 2010-2011 PEOPLECERT
More informationAPPENDIX 1: 8-DIGIT SIC CODES COMPRISING THE GREEN ECONOMY
APPENDIX 1: 8-DIGIT SIC CODES COMPRISING THE GREEN ECONOMY SIC8 SIC8DESC GRSECTOR 1810103 Mats, preseeded: soil erosion, growing of Green building 8510102 Reforestation services Environmental services
More information7 Principles of Lean Supplies
7 Principles of Lean Supplies Simple changes make a big impact Our thanks to Kimberly-Clark for allowing us to reprint the following article. Lean supplies: a hidden opportunity Lean has transformed manufacturing
More informationGreen Seal Best Practices Guide for Fleet Vehicle Maintenance Operations
Green Seal Best Practices Guide for Fleet Vehicle Maintenance Operations June 4, 1996 Green Seal, Inc. 1001 Connecticut Ave. NW, Ste 872 Washington, DC USA 20036-5525 (202) 872-6400 FAX (202) 872-4324
More informationINNOVATION LEAN PRINCIPLES IN AUTOMOTIVE GREEN MANUFACTURING
INNOVATION LEAN PRINCIPLES IN AUTOMOTIVE GREEN MANUFACTURING Technical University in Košice, Mäsiarska 74, 04001 Košice. Dusan.Sabadka@tuke.sk Keywords: innovation, green manufacturing, lean management,
More informationGood Housekeeping Practices for DPW/Fleet Maintenance Facilities
Good Housekeeping Practices for DPW/Fleet Maintenance Facilities Kevin P. Walker C&S Engineers, Inc. Best Management Practices Best Management Practices (BMPs) are measures and/or controls used to prevent
More informationDefine. Measure. Analyze. Improve. Control. Project Name/Description. DMAIC Step Work Done/Tools Used by Team My Role/Contribution
Six Sigma Green Belt DMAIC Project Logbook Please fill out this document (use as many pages as necessary). Detail what your team and you did in each step of the DMAIC. If the Project is a Kaizen Event,
More informationAURV471482A Plan and manage compliance with environmental regulations in the body repair industry
AURV471482A Plan and manage compliance with environmental regulations in the body repair industry Release: 1 AURV471482A Plan and manage compliance with environmental regulations in the body repair industry
More informationLEAN, SIX SIGMA, AND ERP:
LEAN, SIX SIGMA, AND ERP: Putting it all together for Improved Performance Paper Summary Many manufacturers perceive Lean, Six Sigma, and ERP as contrasting approaches. They often see them as mutually
More informationHere are some hazardous wastes commonly generated by the marina industry:
Important Note: The following text is excerpted directly from the New York State Department of Environmental Conservation s publication, Environmental Compliance, Pollution Prevention, and Self Assessment
More informationExtraction Oil and Gas, LLC. Diamond Valley Central Oil Terminal Waste Management Plan
Extraction Oil and Gas, LLC. Diamond Valley Central Oil Terminal Waste Management Plan Scope: This Extraction Oil and Gas Waste Management Plan has been prepared to provide operations personnel at the
More informationASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations
Carry out and complete clean-room cleaning Overview 1 Carry out clean-room 2 Remove and store equipment, tools and materials after clean-room 3 Remove and dispose of contaminated material after clean-room
More informationTrivia Game (Print double-sided for cards with answers on the back)
Trivia Game (Print double-sided for cards with answers on the back) 2 3 Landfills/Disposal: Landfills/Disposal Which item takes up most of our garbage out of these three options? A. Diapers. B. Plastic
More informationIMPLEMENTING ISO 14001:2004. www.aecos.co.uk
IMPLEMENTING ISO 14001:2004 www.aecos.co.uk What is an Environmental Management System? A systematic framework to manage the immediate and long term environmental impacts of an organisation s products,
More informationLean Manufacturing and Six Sigma
Lean Manufacturing and Six Sigma Research Questions What have we done in the past? What must we do in the future? How do we know these are the correct actions? 1 Lean Definitions Key concepts of lean:
More informationEnvironmental Standard Operating Procedure Originating Office: MCAS Miramar Environmental Management Department
Environmental Standard Operating Procedure Originating Office: MCAS Miramar Environmental Management Department Revision: Original Prepared By: Environmental Management Department Approved By: William
More informationLEAN TECHNIQUES. Some of Our Lean Courses: --How to Implement Lean in Small Companies --Flow control/management
One Sunny Hill, Oxford, MA 01540 Phone: 1-877-987-3801 Email: info@qpsinc.com LEAN TECHNIQUES ARE YOU LOOKING TO LEAD THE INDUSTRY? For Manufacturing or Service Does your company: - Have adequate profitability
More informationSierra Army Depot ISO 14001. Environmental Management System (EMS) Awareness Training. ~ protecting our environment is. everyone s responsibility ~
Sierra Army Depot ISO 14001 Environmental Management System (EMS) Awareness Training ~ protecting our environment is everyone s responsibility ~ 11/30/2015 1 ISO 14001 Overview ISO 14001 is an internationally
More informationAV Live Event Professionals: Sustainability Best Practices
AV Live Event Professionals: Sustainability s The following best practices have been compiled to help AV live event professionals better understand how sustainability relates to operations at their company
More informationLOCAL ARRANGEMENTS FOR WASTE DISPOSAL (BEGBROKE SITE)
37 Appendix C LOCAL ARRANGEMENTS FOR WASTE DISPOSAL (BEGBROKE SITE) The Chemicals Technician is your point of contact for enquiries regarding waste disposal at Begbroke. She is not based at Begbroke on
More informationLEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0
MODULE 1 LEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0 1. Cultural Enablers 15% 20% 25% 1.1. Principles of Cultural Enablers 3% 4% 5% 1.1.1. Respect for the individual 1.1.2. Humility 1.2. Processes
More informationVEHICLE SERVICE FACILITIES. Best Management Practices
VEHICLE SERVICE FACILITIES Best Management Practices Chapter 1 of the Best Management Practices Manual for the City s Storm Water Management Program Public Works Department 809 Center Street, Santa Cruz,
More informationVISUAL management techniques for optimum INVENTORY form, fit and function
You won t GET LEAN... until you GET VISUAL! VISUAL management techniques for optimum INVENTORY form, fit and function Raw materials, work-in-process, finished goods, location and product flow Kanban Min/max
More informationLean Manufacturing: Part 2. Charles Theisen, CPIM, CIRM. Lean Manufacturing Part 1I
Lean Manufacturing Part 1I 2013 ProcessPro, the ProcessPro logos, and the ProcessPro product and service names mentioned herein are registered trademarks or trademarks of Blaschko Computers, Inc. d.b.a.
More informationFigure 1: Working area of the plastic injection moulding company. Figure 2: Production volume, quantity of defected parts, and DPPM
1. Title : BLACK DOT DEFECT REDUCTION IN PLASTIC INJECTION MOULDING PROCESS 2. Student Name: Mr. Itthiwat Rattanabunditsakun / ID: 557 12290 21 Advisor Name: Assoc. Prof. Parames Chutima, Ph.D. 3. Problem
More informationPOLLUTION PREVENTION FACT SHEET: AUTOMOBILE MAINTENANCE
POLLUTION PREVENTION FACT SHEET: AUTOMOBILE MAINTENANCE Description This pollution prevention measure involves creating a program of targeted outreach and training for businesses involved in automobile
More informationOperations Management and Lean Six Sigma. Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada
Operations Management and Lean Six Sigma Presented by: David Muncaster Manager, CI and CSAT Staples Advantage Canada Who is this guy standing up in front of you? Manager, Continuous Improvement and CSAT
More informationTurn off the tap while you brush your teeth You ll conserve up to 5 gallons of water per day.
Go Green Tips Turn off the tap while you brush your teeth You ll conserve up to 5 gallons of water per day. Buy locally It is good for the local economy and it will save energy because products haven t
More informationChapter 2 Stormwater Pollution Prevention Plan (SWPPP) for Park Operations
SWPPP for Park Operations 2 Chapter 2 Stormwater Pollution Prevention Plan (SWPPP) for Park Operations Bordered by Lake Washington & Lake Sammamish, the City of Bellevue has more than 60 miles of streams,
More informationSustainability Initiatives at the General Electric Co.
Sustainability Initiatives at the General Electric Co. Steve Hung Principal Engineer Project Leader April 22, 2014 Version 2 Steve Hung BS, MS, PhD - Chemical Engineering Current responsibilities - Pollution
More informationSMDC/ARSTRAT ENVIRONMENTAL COMPLIANCE TRAINING
SMDC/ARSTRAT ENVIRONMENTAL COMPLIANCE TRAINING Updated 24 February 2011 ENVIRONMENTAL COMPLIANCE Protecting the Environment is not Just a Good Idea It s the Law Numerous and Increasingly gystringent Local,
More informationProcedure for the Recycling Material and Disposal of Waste from Laboratories
Procedure for the Recycling Material and Disposal of Waste from Laboratories Document Control Document Created by v1.0 Shane McAteer 26/01/2011 Updates V3.5 Paul Monk 29/10/2013 V4.1 Gary Stratmann 08/01/16
More informationLTES Environmental Management System (EMS) Programmes
LTES Management System (EMS) Programmes 0 TABLE OF CONTENTS ENVIRONMENTAL MANAGEMENT PROGRAM DESCRIPTION... 2 Supplies... 2 Soap & Detergents... 2 Energy Use... 2 Water Use... 2 Water Discharges... 2 Solid/Liquid
More informationBusiness improvement workshops
Business improvement workshops Performance Workshops Meet the challenge to improve performance After attending a SR Operational Boot Camp put on by the Strategic Business Services Division we immediately
More informationWaste Handling & Disposal
Objectives Cover Contain Educate Reduce/Minimize Product Substitution Description Improper storage and handling of solid wastes can allow toxic compounds, oils and greases, heavy metals, nutrients, suspended
More informationLean Healthcare Simulation Segment I: Baseline Performance
Lean Healthcare Simulation Segment I: Baseline Performance Learning Objectives At the end of this module, you should be able to: Explain the mechanics and rules of the simulation Execute the process in
More informationLean Software Development and Kanban
1 of 7 10.04.2013 21:30 Lean Software Development and Kanban Learning Objectives After completing this topic, you should be able to recognize the seven principles of lean software development identify
More informationBest Management Practices
for The City of Paso Robles is required to implement a Phase II Municipal Water Program in order to reduce or eliminate the pollutants that enter our waterways from both storm water and non-storm water
More informationISO 14001-2004 AUDIT CHECKLIST
-2004 AUDIT HEKLIST REQUIREMET Environmental aspects What evidence exists that the organization has established, implemented and maintains (a) procedure(s) to identify the environmental aspects of its
More informationSOP 4: Spill Response and Cleanup Procedures SOP 4: SPILL RESPONSE AND CLEANUP PROCEDURES
SOP 4: SPILL RESPONSE AND CLEANUP PROCEDURES Municipalities are responsible for any contaminant spill or release that occurs on property they own or operate. Particular areas of concern include any facilities
More informationLEGAL FRAMEWORK, POTENTIAL AND OUTLOOK FOR BIOENERGY SECTOR IN VIETNAM
Conference on Bioenergy in Viet Nam October 6 th, 2014, HCM City LEGAL FRAMEWORK, POTENTIAL AND OUTLOOK FOR BIOENERGY SECTOR IN VIETNAM By Nguyen Duc Cuong Director of Center for Renewable Energy & CDM,
More informationCompany Name Chemical Spill Prevention & Clean-up Procedures Program. Last Revised On 00/00/0000
Company Name Chemical Spill Prevention & Clean-up Procedures Program Last Revised On 00/00/0000 PURPOSE The following program will discuss how prevent chemical spills from occurring and setting forth procedures
More informationLean Sigma Tools in the Hiring Process
Lean Sigma Tools in the Hiring Process Executive Summary Talent Acquisition today as an activity fraught with risks Did we hire the right person, the right skills, the right fit?- and has the maximum impact
More informationRoot Cause Analysis 1
Root Cause Analysis 1 Root Cause Analysis Root Cause Analysis is a method that is used to address a problem or non-conformance, in order to get to the root cause of the problem. It is used so we can correct
More informationEnvironmental Management Systems in Hotels. 15 Steps to the Successful Implementation of an Environmental Management System in a Hotel
Environmental Management Systems in Hotels 15 Steps to the Successful Implementation of an Environmental Management System in a Hotel 2 15 STEPS 1. Assemble the team 2. Initial Review 3. Environmental
More informationAQUEOUS PARTS CLEANING
AQUEOUS PARTS CLEANING Best Environmental Practices for Auto Repair November 1999 What s wrong with solvents? Mineral spirits is a solvent commonly used for part cleaning because of its ability to quickly
More informationWhy Do I Need to Recycle? LESSON 1
Why Do I Need to Recycle? LESSON 1 Recycling Benefits Everyone The earth has a limited amount of space with limited resources that must sustain us all. We cannot keep wasting our resources and polluting
More informationHow Your Vehicle Service Facility Can Prevent Stormwater Pollution
TIPS FOR A CLEANER BAY How Your Vehicle Service Facility Can Prevent Stormwater Pollution alameda county YOU CAN PREVENT WATER POLLUTION! Storm drains flow directly into creeks and the Bay without any
More informationPUBLIC WORKS LEAN SIX SIGMA PROJECT FLEET PURCHASING OVER $1,000
PUBLIC WORKS LEAN SIX SIGMA PROJECT FLEET PURCHASING OVER $1,000 CHAMPION: Kevin Cook, Public Works Director SPONSOR: Melissa Beamon, Operations Superintendent TEAM LEAD: Evelyn Jensen, Green Belt Candidate
More informationSpill Prevention, Control & Cleanup SC-11
Objectives Cover Contain Educate Reduce/Minimize Product Substitution Description Spills and leaks, if not properly controlled, can adversely impact the storm drain system and receiving waters. Due to
More informationLonger lifetime for hydraulic oil
Longer lifetime for hydraulic oil In many applications hydraulic oils and lubricating oils are exchanged with new oil after only some thousand hours of operation. Changing the oil causes high costs and
More informationGetting Started with Lean Process Management
Getting Started with Lean Process Management Hi-Tec Exchange Conference San Francisco July 25, 2011 Missions To team with Organizational Leaders, Managers, & Employees to focus on customers & improve competitiveness,
More informationThe Environment Team. A-Z Guide. to Waste & Recycling. www.le.ac.uk/environment
The Environment Team A-Z Guide to Waste & Recycling www.le.ac.uk/environment 2 UNIVERSITY OF LEICESTER ENVIRONMENT TEAM Welcome...to the University of Leicester s A-Z Guide to Waste and Recycling. Over
More informationReuse The Recycling Zone offers usable household chemicals and paint free for the taking. The Reuse area is open during normal business hours.
The Recycling Zone display kit The Recycling Zone display kit helps educators explain the importance of proper disposal of household chemicals and products that do not belong in the trash. The display
More informationLean Six Sigma Black Belt-EngineRoom
Lean Six Sigma Black Belt-EngineRoom Course Content and Outline Total Estimated Hours: 140.65 *Course includes choice of software: EngineRoom (included for free), Minitab (must purchase separately) or
More informationImplementation of Lean Six Sigma Principles: Making Data Cleansing Lean
Implementation of Lean Six Sigma Principles: Making Data Cleansing Lean Nityanand Wachche B.E in Computer Engineering University of Mumbai Mumbai, India ABSTRACT Data cleansing is required before performing
More informationPR11 Plastic Repair, Adhesive
Uniform Procedures For Collision Repair PR11 Plastic Repair, Adhesive 1. Description This procedure describes methods for making adhesive repairs to most types of exterior and interior automotive plastics.
More informationTechnaxx DigiTape DT-01 User Manual Please find the Declaration of Conformity for this device under following internet-link:
Technaxx DigiTape DT-01 User Manual Please find the Declaration of Conformity for this device under following internet-link: Introduction www.technaxx.de//konformitätserklärung/digitape_dt-01 Rediscover
More informationLean Six Sigma for Healthcare
Lean for Healthcare Yellow Belt Green Belt Black Belt Lean Fundamentals Advanced Lean for Healthcare The Lean for Healthcare Yellow Belt program is designed to provide a basic introducti to Lean Six Sigma
More informationHazardous Waste Generator Newsletter
Hazardous Waste Generator Newsletter December 2012 Environmental Management Department 952-891-7557 www.dakotacounty.us Get down to brass tacks Your business can see big benefits from reducing, reusing
More informationHow Lean Six Sigma can Change Higher Education. Norma Simons Performance Innovation LLC Secretary ASQ Education Division
How Lean Six Sigma can Change Higher Education Norma Simons Performance Innovation LLC Secretary ASQ Education Division Learning Outcomes Understand the value of project selection Identify the parameters
More informationHACH LANGE GmbH Willstätterstraße 11 40549 Düsseldorf
Supervision Certificate no. 10297 The establishment meets the requirements of 11 para 4 ElektroG (WEEE) as initial treatment plant for of waste electrical and electronic equipment in accordance with Annex
More informationBusiness Process Optimization w/ Innovative Results
Business Process Optimization w/ Innovative Results Sam DiSalvatore Introduction The principle of continuous process improvement is based on the belief that even excellent products and services can be
More informationHow To Understand The Purpose Of Life Cycle Assessment
Life-Cycle Assessment Lesson 1 Overview This is the first lesson on life cycle assessment in this module. In this lesson, the framework for conducting life-cycle assessments is described and examples of
More informationManual for Laser Pointer
GB Manual for Laser Pointer TABLE OF CONTENTS GB MANUAL FOR LASER POINTER...8 INTRODUCTION... 8 FACTS ABOUT LASER LIGHT... 8 How strong is the light in the Laser Pointer?... 8 ATTACHING THE LASER... 9
More informationTHE JOHN DEERE BULK OIL PROGRAM
THE JOHN DEERE BULK OIL PROGRAM 2007 Rev. 2011 1 B u l k O i l P r o g r a m Bulk Oil Program Overview Value Added For Dealers And Customers Cost Savings Calculations How The Program Works Equipment Products
More informationEnvironmental Achievements Volvo Trucks North America New River Valley Plant Dublin, VA
Environmental Achievements Volvo Trucks North America New River Valley Plant Dublin, VA Overview The New River Valley (NRV) Plant, located in Dublin, Va., manufactures and assembles Volvo brand trucks.
More informationStudy of Productivity Improvement Using Lean Six Sigma Methodology
International Review of Applied Engineering Research. ISSN 2248-9967 Volume 4, Number 1 (2014), pp. 33-38 Research India Publications http://www.ripublication.com/iraer.htm Study of Productivity Improvement
More informationGuide Contents. 7 Common Drivers for Chemical Management. Page. Page 2. Adhesive Technologies - Chemical Management
Customer Guide Guide Contents Page 3 What is Chemical Management? 4 Why do customers choose Chemical Management? 5 Benefits of Chemical Management 6 Differentiators for Henkel 7 Common Drivers for Chemical
More informationLEAN 101 CRASH COURSE. Presented by Jacob McKenna and Seaver Woolfok
LEAN 101 CRASH COURSE Presented by Jacob McKenna and Seaver Woolfok Introductions Name Company Position Expectations Favorite Movie Instructors Background: Jacob McKenna has been involved with Lean manufacturing
More informationTechnical Environmental Survey
Technical Environmental Survey The Technical Environmental Survey What is the Technical Environmental Survey? The Technical Environmental Survey includes the topics on community information (getting to
More informationSustainable Plastics with Reduced Carbon Footprint & Reduced Waste
Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Joseph P. Greene California State University, Chico Chico, CA 95929-0789 Abstract Plastic products can be made more sustainable by reducing
More informationLOCAL ARRANGEMENTS FOR WASTE DISPOSAL (MAIN SITE)
LOCAL ARRANGEMENTS FOR WASTE DISPOSAL (MAIN SITE) 30 Appendix B The Chemicals Technician, Dr Mimi Nguyen, can be contacted by telephone (83337) or e-mail (mimi.nguyen@materials.ox.ac.uk) for help or advice
More informationERP Meets Lean Management
Meets Lean Management James M. Noblitt, CPIM, CIRM Sr. Management Consultant High-Tech meets No-Tech! Digital Lean Visual Work Orders Push Data Entry Reports Security/Access Data Accuracy Complicated Spread
More informationEnergy & Materials Flow & Cost Tracker Survey of Technical Assistance Providers
Energy & Materials Flow & Cost Tracker Survey of Technical Assistance Providers Survey conducted by NEWMOA Total Number of Respondents: 35 1. Have you found that small and medium-sized manufacturing companies
More informationLean Silver Certification Blueprint
The Lean Certification Blueprint provides additional useful information beyond the Body of Knowledge. The Body of Knowledge specifies the competencies, topics, and subtopics required by different types
More informationQUIZ MODULE 1: BASIC CONCEPTS IN QUALITY AND TQM
QUIZ MODULE 1: BASIC CONCEPTS IN QUALITY AND TQM These questions cover Sessions 1, 2, 5, 6, 7. The correct answer is shown in bold A fundamental attribute of TQM is Drawing control charts Having team meetings
More informationSpanish industry produces 40.2 million tonnes of waste in 2009, 19.6% less than the previous year
26 October 2011 Waste Production Surveys Year 2009 Spanish industry produces 40.2 million tonnes of waste in 2009, 19.6% less than the previous year During the year 2009, the industrial sector in Spain
More informationHow To Prevent Over Water Activities
Objectives Cover Contain Educate Reduce/Minimize Product Substitution Description Over-water activities occur at boat and ship repair yards, marinas, and yacht clubs. The discharge of pollutants to receiving
More informationLean IT Foundation Syllabus
Lean IT Foundation Syllabus December 2015 - Version 1.06 1 Introduction Lean IT Foundation helps IT organizations to ensure that they provide their customers with the best possible services. Through understanding
More informationPollution Liability Exposure: Adjustments your automotive business should consider to maintain compliance
: Adjustments your automotive business should consider to maintain compliance Pollution sounds like such a dirty word. And as an automotive service business owner, employee or operator, you might be producing
More informationAsset Management for Green Manufacturing
Reduce Costs & Adopt Green Manufacturing Practices Asset Management for Green Manufacturing Selvaraja Vallyan Maximo Sales Leader, ASEAN selva@sg.ibm.com Agenda Vision Green Manufacturing Industry Challenges
More information7. Chemical Waste Disposal Procedures
7. Chemical Waste Disposal Procedures Substances that Can and Cannot be Disposed of via Sink Drains or in Regular Solid Refuse Containers 1. It is prohibited to pour down a sink or floor drain, or place
More information40 CFR 262.11 Hazardous Waste Determination
262.11 states, the following: 40 CFR 262.11 Hazardous Waste Determination [which is incorporated into 391 3 11.08(1) of the Georgia Rules for Hazardous Waste Management by reference] A person who generates
More informationImprove Profitability by Improving Processes. Presented by: Frank D. Cohen, MBB, MPA Senior Analyst MIT Solutions, Inc.
Improve Profitability by Improving Processes Presented by: Frank D. Cohen, MBB, MPA Senior Analyst MIT Solutions, Inc. 1 Why Have a Standard? Create efficiencies and lower administrative costs Reduce angst
More informationDallas Center for Performance Excellence (CPE) Executive Summary
Dallas Center for Performance Excellence (CPE) Executive Summary Publication Date: January 8, 2015 The Center for Performance Excellence (CPE) is a continuous improvement initiative commissioned by the
More informationOSAP 2011 Symposium www.osap.org
Copyright M. Govoni 1 GO GREEN! Reduce Reuse Recycle Reducing Consumption Energy Resources Water Fossil fuels Reducing Waste Packaging Reusables vs. disposables Reducing our carbon footprint Copyright
More informationENVIRONMENTAL MANAGEMENT ACCOUNTING IMPLEMENTATION GUIDELINE
ENVIRONMENTAL MANAGEMENT ACCOUNTING IMPLEMENTATION GUIDELINE ENVIRONMENTAL MANAGEMENT ACCOUNTING IMPLEMENTATION GUIDELINE 1. Introduction This guideline follows the Implementation Rules for Company Environmental
More informationUnit 1: Introduction to Quality Management
Unit 1: Introduction to Quality Management Definition & Dimensions of Quality Quality Control vs Quality Assurance Small-Q vs Big-Q & Evolution of Quality Movement Total Quality Management (TQM) & its
More informationMaking Improvement Work in Pharmaceutical Manufacturing Some Case Studies. Ronald D. Snee
Making Improvement Work in Pharmaceutical Manufacturing Some Case Studies Ronald D. Snee ISPE Midwest Extended Education and Vendor Day Overland Park, KS 2 May 2007 King of Prussia PA New York NY Washington
More informationNYSDEC Environmental Education
NYSDEC Environmental Education Where is Away? For Students in Grades 5 through 8 A 45- minute program designed to introduce the basics of where garbage goes, and how reduction of the waste stream is beneficial.
More informationProject Quality Management. Project Management for IT
Project Quality Management 1 Learning Objectives Understand the importance of project quality management for information technology products and services Define project quality management and understand
More informationLean and Green Manufacturing: Concept and its Implementation in Operations Management
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 5 (2014), pp. 509-514 Research India Publications http://www.ripublication.com/ijame.htm Lean and Green Manufacturing:
More informationBest Environmental Management Practices
Save money and prevent costly utility increases by protecting our environment and our Publicly Owned Treatment Works. Read this pamphlet to find out how. Vehicle Service Facility Best Environmental Management
More informationA Resident s Guide to Recycling
A Resident s Guide to Recycling We understand. We re competing for attention with everything else in your life. Recycling may not be exciting but it s important and easy, and recycling right benefits the
More informationSix Sigma in Action. Data-driven process improvement. Process Improvement Brief February 2015 www.datamark.net
Six Sigma in Action Data-driven process improvement Process Improvement Brief February 2015 www.datamark.net Six Sigma Methodology Applied to clients business processes at our U.S. and offshore sites,
More information