CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION

Size: px

Start display at page:

Download "CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION"

Frederick Gordon
8 years ago
Views:

1 T ECHNICAL NOTE Product: Create!form Server 2.8 Last modified: February 2, :49 pm Created by: Development Inside this note: Installing Create!form Server 2.8 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION This note contains information on how to perform an FTP installation. Make sure you have followed the Pre-upgrade Tasks section from the Create!form Server for iseries V6R1 Upgrade Notes if you are upgrading. In this note, the following is discussed: Create!form Server Copyright Bottomline Technologies, Inc All Rights Reserved, Printed in the United States of America Every effort has been made to ensure the accuracy of this manual. Information in this document is subject to change without notice and does not represent a commitment on the part of Bottomline Technologies. Bottomline Technologies makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability or fitness for particular purpose. All software described in this manual is furnished under a license agreement or nondisclosure agreement, and may only be used in accordance with the terms of this agreement. Create!form Server licensee(s) may reproduce Create!form Server instructional documentation as needed for distribution to users of the licensed Create!form Server software. The licensee(s) agrees not to modify, adapt, translate, or otherwise alter the documentation prior to distribution.

form Server for iseries V6R1 Upgrade Notes if you are upgrading. In this note, the following is discussed: Create!form Server Copyright Bottomline Technologies, Inc. 2009.

2 2 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION To install Create!form Server Sign on as QSECOFR, then create a savefile in the QGPL library of your AS/400: CRTSAVF QGPL/savefile name Where savefile name is the name of the savefile you wish to create. For example: CRTSAVF QGPL/ILCFS280 2 Start an FTP session from the PC to the AS/400 by entering the name or IP address of your AS/400. For example: C:\> FTP myas400 3 Complete the required signon and enter the password using QSECOFR account. Specify a BINARY transfer mode. ftp> BINARY 4 FTP the required file (ILCFS280) from the \Create!form server 2.8 (V6R1) directory on the installation CD to the savefile created in step 1. For example: ftp> PUT ILCFS280 QGPL/ ILCFS280 5 Restore the library on the AS/400 from the savefile in QGPL. For example: RSTLIB SAVLIB(ILCRTCFS) DEV(*SAVF) SAVF(QGPL/ILCFS280) MBROPT(*ALL) ALWOBJDIF(*ALL) 6 Add ILCRTCFS to your library list: ADDLIBLE ILCRTCFS

$For example: C:\> FTP myas400 3 Complete the required signon and enter the password using QSECOFR account. Specify a BINARY transfer mode.$

3 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION 3 7 From an OS/400 command screen, execute the command to install the AS/ 400 library required for Create!form server: a b CALL PGM(ILCRTCFS/INSCFICFS) Follow the on-screen prompts to complete the installation. You would be required to nominate an Install library and directory ( Default : CFSSYS280 and Create!form2). However, if you're upgrading from version 2.7 please use the System library name and IFS directory recorded during the pre-upgrade tasks.

4 4 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION It is normal to receive the following informational message during the installation process. Make sure to confirm that there are "205 objects restored" and "0 not restored" in the message. Then respond "I" to ignore the failing command.

following informational message during the installation process.

5 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION 5 Again, it is normal to receive the following informational message during the installation process. Make sure to confirm the phrase "This directory share already active" in the message. Then respond "I" to ignore the failing command. 8 The savefile may be deleted once installation is complete. Execute the following command: DLTF FILE(QGPL/ILCFS280) 9 The install library may also be deleted when finished. Execute the following command: DLTLIB LIB(ILCRTCFS)

installation process. Make sure to confirm the phrase "This directory share already active" in the message.

6 6 CREATE!FORM SERVER FOR ISERIES V6R1 INSTALLATION Note Before deleting ILCRTCFS, ensure that it has been removed from your library list. 10 If you are performing an upgrade from version 2.7, please replace the content of your IFS directory with your backup from the "pre-upgrade tasks" procedure.

SequeLink Server Installation Instructions for the iseries

SequeLink Server Installation Instructions for the iseries Requirements This document describes installation of SequeLink Server for the iseries. Throughout this document, the term iseries refers to the