Technical description APCI-/CPCI Multifunction counter board - Digital I/O -

Transcription

1 DIN EN ISO 9001:2008 certified ADDI-DATA GmbH Airpark Business Center Airport Boulevard B Rheinmünster Germany Phone: Fax: info@addi-data.com Technical description APCI-/CPCI-1710 Multifunction counter board - Digital I/O - Edition: /2013

2 Product information This manual contains the technical installation and important instructions for correct commissioning and usage, as well as production information according to the current status before printing. The content of this manual and the technical product data may be changed without prior notice. ADDI-DATA GmbH reserves the right to make changes to the technical data and the materials included herein. Warranty and liability The user is not permitted to make changes to the product beyond the intended use, or to interfere with the product in any other way. ADDI-DATA shall not be liable for obvious printing and phrasing errors. In addition, ADDI DATA, if legally permissible, shall not be liable for personal injury or damage to materials caused by improper installation and/or commissioning of the product by the user or improper use, for example, if the product is operated despite faulty safety and protection devices, or if notes in the operating instructions regarding transport, storage, installation, commissioning, operation, thresholds, etc. are not taken into consideration. Liability is further excluded if the operator changes the product or the source code files without authorisation and/or if the operator is guilty of not monitoring the permanent operational capability of working parts and this has led to damage. Copyright This manual, which is intended for the operator and its staff only, is protected by copyright. Duplication of the information contained in the operating instructions and of any other product information, or disclosure of this information for use by third parties, is not permitted, unless this right has been granted by the product licence issued. Non-compliance with this could lead to civil and criminal proceedings. ADDI-DATA software product licence Please read this licence carefully before using the standard software. The customer is only granted the right to use this software if he/she agrees with the conditions of this licence. The software must only be used to set up the ADDI-DATA products. Reproduction of the software is forbidden (except for back-up and for exchange of faulty data carriers). Disassembly, decompilation, decryption and reverse engineering of the software are forbidden. This licence and the software may be transferred to a third party if this party has acquired a product by purchase, has agreed to all the conditions in this licence contract and the original owner does not keep any copies of the software. Trademarks ADDI-DATA, APCI-1500, MSX-Box and MSX-E are registered trademarks of ADDI-DATA GmbH. Turbo Pascal, Delphi, Borland C, Borland C++ are registered trademarks of Borland Software Corporation. Microsoft.NET, Microsoft C, Visual C++, MS-DOS, Windows 95, Windows 98, Windows 2000, Windows NT, Windows EmbeddedNT, Windows XP, Windows Vista, Windows 7, Windows Server 2000, Windows Server 2003, Windows Embedded and Internet Explorer are registered trademarks of Microsoft Corporation. LabVIEW, LabWindows/CVI, DASYLab, DIAdem are registered trademarks of National Instruments Corporation. CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group. VxWorks is a registered trademark of Wind River Systems, Inc. RTX is a registered trademark of IntervalZero. 2

3 Warning The following risks result from improper implementation and from use of the board contrary to the regulations: Personal injury Damage to the board, the PC and peripherals Pollution of the environment Protect yourself, others and the environment! Read the safety precautions (yellow leaflet) carefully! If this leaflet is not enclosed with the documentation, please contact us and ask for it. Observe the instructions of this manual! Make sure that you do not forget or skip any step. We are not liable for damages resulting from a wrong use of the board. Pay attention to the following symbols: i IMPORTANT! Designates hints and other useful information. WARNING! Designates a possibly dangerous situation. If the instructions are ignored, the board, the PC and/or peripherals may be destroyed. WARNING! Designates a possibly dangerous situation. If the instructions are ignored, the board, the PC and/or peripherals may be destroyed and persons may be endangered. 3

4 APCI-/CPCI-1710 Contents WARNING DIGITAL INPUTS AND OUTPUTS Block diagram Typical applications Used signals Pin assignment of the front connector Connection example I/O mapping Description of the I/O functions Select register Output register Input register Recognition register (Base +60) Working with the digital I/O function STANDARD SOFTWARE Figures Fig. 1-1: Block diagram of the function digital I/O...5 Fig. 1-2: Pin assignment of the front connector...7 Fig. 1-3: Connection example...8 Tables Table 1-1: Used signals...6 Table 1-2: I/O mapping of the function digital I/O...9 4

5 APCI-/CPCI-1710 Digital inputs and outputs 1 DIGITAL INPUTS AND OUTPUTS The function "Digital Inputs/Outputs" allows a comfortable control or monitoring of single differential, TTL or 24 V signals. Properties: - 2 x differential RS422/RS485 inputs (24 V at the APCI , or optional for the CPCI-1710), channels C and D - 2 x differential RS422/RS485 inputs/outputs (only for the APCI-1710 or CPCI-1710); selectable as input or output through software, channels A and B - 3 x 24 V inputs, channels E, F, G (optional 5 V) - 1 x 24 V output (H, optional 5 V) Block diagram Fig. 1-1: Block diagram of the function digital I/O 5

6 Digital inputs and outputs APCI-/CPCI Typical applications The function digital inputs/outputs completes a complex counting application with additional 24 V, TTL or differential RS422 inputs and outputs signals. - Comfortable monitoring of 24 V signals,rs422, TTL signals - Comfortable control of24 V, TTL, RS422, differential signals. 1.2 Used signals The function digital inputs/outputs occupies 5 to 7 inputs (A to G) and 1 to 3 outputs (A, B and H) of the respecting function module of the APCI-/CPCI At the connector A x +/ - B x +/ - Polarity Table 1-1: Used signals Function Diff./TTL/Opt. 24 V* Digital input/output, switchable by software Diff./TTL/ Opt. 24 V* Digital input/output, switchable by software C x +/ - Diff./TTL/Opt. 24 V Digital input D x +/ - Diff./TTL/Opt. 24 V Digital input E x 24 V/ Opt. 5V Digital input F x 24 V/Opt. 5V Digital input G x 24V/Opt. 5V Digital input H x 24 V/Opt. TTL Digital output *: only for the APCI-1710 or CPCI-1710 x: Number of the function module. 6

7 APCI-/CPCI-1710 Digital inputs and outputs 1.3 Pin assignment of the front connector The figure below is a connection example. The function digital inputs/outputs is implemented on all function modules. Fig. 1-2: Pin assignment of the front connector 7

8 Digital inputs and outputs APCI-/CPCI Connection example Programming (module 1) A: Output B: Input Fig. 1-3: Connection example 8

9 APCI-/CPCI-1710 Digital inputs and outputs 1.5 I/O mapping Table 1-2: I/O mapping of the function digital I/O IORD D31...D24 D23...D16 D15...D8 D7...D0 BYTES BASEx Input-Register BASEx BASEx + 60 FUNKNBR2 FUNKNBR1 REVBYTE2 REVBYTE1 IOWR D31...D24 D23...D16 D15...D8 D7...D0 BYTES BASEx Output-Register BASEx Select-Register BASEx : No function; y: Data not relevant, x: Number of the function module. The accesses are always read or written in 32-bit 1.6 Description of the I/O functions Select register 8-bit register; sets the polarity of the input/output channels A and B. This register can only be written. After a reset the value is set on 0, i.e. the line is set as input channel. Bit Logic value Meaning BIT D0 0 I/O lines A are set as input channel 1 I/O lines A are set as output channel BIT D1 0 I/O lines B are set as input channel 1 I/O lines B are set as output channel 9

10 Digital inputs and outputs APCI-/CPCI Output register Base address + 0: 8-bit register for controlling the digital outputs. This register can only be written. After a reset the value is set to 0, i.e. the outputs are set to Low. Bit Logic value Meaning BIT D0 0 Output H is set to "Low" 1 Output H is set to "High" BIT D1 0 Output A is set to "Low" (differential/digital) 1 Output A is set to "High" (differential/digital) BIT D2 0 Output B is set to "Low" (differential/digital) 1 Output B is set to "High" (differential/digital) Input register Base address + 0: 8-bit register for reading the digital inputs. This register can be only read and informs about the state of the digital inputs. Bit Logic value Meaning BIT D0 0 Input C is set to "Low" (diff.) 1 Input C is set to "High" (diff.) BIT D1 0 Input D is set to "Low" (diff.) 1 Input D is set to High" (diff.) BIT D2 0 Input E is set to "High" ( >17 V ) 1 Input E is set to "Low" or input voltage is <14 V BIT D3 0 Input F is set to "High" ( >17 V ) 1 Input F is set to "Low" or input voltage is <14 V BIT D4 0 Input G is set to "High" ( >17 V ) 1 Input G is set to "Low" or input voltage is <14 V BIT D5 0 Input A is set to "Low" (diff.) 1 Input A is set to "High" (diff.) BIT D6 0 Input A is set to "Low" (diff.) v 1 Input A is set to "High" (diff.) 10

11 APCI-/CPCI-1710 Digital inputs and outputs Recognition register (Base +60) Function description and revision (read command, ASCI format) BASE + 60 "D" "I" "1" "1" Meaning: Digital I/O revision Working with the digital I/O function 1. Connecting the signals 2. Initialising A and B channels as input or output 3. Controlling the outputs 4. Reading the inputs 11

12 Standard software APCI-/CPCI STANDARD SOFTWARE The API software functions supported by the board are listed in an HTML document. A description on how to access the respective file can be found in the document Quick installation PC boards (see PDF link), in the chapter Standard software. 12