R&D Support Services. Ad Astra Rocket Company

Size: px
Start display at page:

Download "R&D Support Services. Ad Astra Rocket Company"

Transcription

1 R&D Support Services

2 About Us A Delaware Corporation, capitalizing on more than 25 years of NASA R&D PhD Scientists, engineers, technicians skilled in the design fabrication and testing of prototype hardware. Facilities in EARTH University Liberia, Costa Rica Corporate Headquarters Houston, TX

3 Support Services Experimentation and testing with: Instrumentation, data acquisition Mechanical design, 3D CAD, CAM, FEA Analysis Specialty machining to aerospace standards Large scale vacuum facilities Cryogenics Magnetic field environments Circuit-board and electrical fabrication Radio-frequency electrical engineering High power plasma sources Computer modeling of: Space trajectories (orbital mechanics) Heat and fluid flow RF-powered plasmas and plasma jets Magnetic systems and shielding

4 Laboratory Testing Capabilities Infrared camera Laser alignment Optical spectrometers Microwave interferometers Residual gas analyzer EMI sensors 3-axis magnetometer Retarding potential energy analyzers Ion flux, single and double Langmuir probes Plasma momentum flux and force targets Data acquisition speeds up to MHz range Vibrational Analysis Custom searchable database software

5 Industrial Measurements & Automation National Instruments software and hardware National Instruments LabVIEW experienced Developers Experience with CompactRIO, CompactDAQ, PXI, SCXI, Motion, & more MATLAB LabVIEW block diagram Experienced developers of, automated, GUI d analysis routines PLCs Experienced developer of Allen-Bradley/Rockwell PLCs Built and programmed PLC system to fully automate large vacuum test facility LabVIEW rocket monitor GUI

6 ProEngineer Wildfire 4.0 Mechanical Design & Drafting

7 Machining Capabilities State-of-the-art machine shops Complex, high precision parts (e.g. liquid rocket engine injector plates) Will work closely with engineers to produce quality parts or assemblies Prototype and mockup shop Exotic metals and ceramics Full traceability Stainless Steel Titanium Aluminium

8 Machine Shops Liberia, Costa Rica Houston, TX Machinist and technicians with over 20 years experience.

9 Vacuum Testing 150 m 3, < 10-8 torr base pressure 5 m 3 high vacuum 10 m 3 vacuum Houston, TX Houston, TX Liberia, Costa Rica

10 Vacuum Testing Vacuum Capabilities Pumping speeds over 300,000 l/s End cap (14 ) and personnel (3 ) access Fast pump-down and vent Rail tracks for easy installation/removal Several large viewports (> 20 ), HD internal video 2.5 m x 5 m precision translation stage (other vacuum motion capability) Coaxial, HV/LV/multi-pin power/signal, optical, thermocouple, and fluid feed thru de-ionized & regular chilled water 100 kw cooling capacity Multi-channel data acquisition, NI-PXI 2 & 10 ton cranes 1.5 MVA 480 VAC service

11 Cryogenic Testing In-house cryogenic testing facilities 8 high lift cryocoolers 6000 gal. liquid nitrogen bulk tank Cryogenic thermal load testing and characterization Three vacuum chambers are used for thermal vacuum insulation Experience with modifying and testing a high temperature superconducting magnet fixture for NASA Operation of a large scale 2 tesla cryogenfree superconducting magnet

12 Electrical & RF Power Engineering Capabilities Altium schematic capture / PCB design, multi-layer (up to 12) circuit boards 1000 sqft electronics fabrication, assembly and test lab Modern high-quality test equipment, e.g. network analyzer, vector impedance meter, oscilloscopes... State of the art solid-state RF power generation with Nautel Ltd 200 kw solid-state RF power installation with supporting electronics In-vacuum RF networks, control and sensor electrnics

13 Plasma Sources Decades of experience in developing high power plasma sources. More than 100 kw Ion Heating Helicon plasma sources that efficiently produce over 300 Amperes of directed ion current. Variety of gases.

14 Plasma Sources VX-50, 50kW VX-200, 200kW VX-CR, 12kW VX-100, 100kW

15 Space Trajectory Analysis Ad Astra has performed mission analysis studies with JSC using the NASA Copernicus code Mars Sample Return Jupiter Capult Low-thrust lunar trajectory in rotating reference frame

16 Graphical Design & Animation Asteroid Deflection Space Debris Mitigation Space Station Reboost

17 Plasma Modeling Ionosphere Field Strength Interference Plasma Jets RF Sources Plasma Reactors Magnetic Field Line Connections

18 Other Services Large Scale Mockups Specialty Testing Aurora Platform Mockup Experience with building high fidelity mockups for large scale spaceflight projects Zero G Testing Over 50 hours flight time testing hardware in NASA Zero-g aircraft

19 Contact Information USA Jared P. Squire, Ph.D. Sr. VP of Research Costa Rica Jorge Oguilve-Araya Operations Director 141 W. Bay Area Blvd Webster, TX (281) main line (281) office Earth University Campus 10 km west of Liberia Guanacaste, Costa Rica main line

High Power VASIMR Experiments using Deuterium, Neon and Argon

High Power VASIMR Experiments using Deuterium, Neon and Argon High Power VASIMR Experiments using Deuterium, Neon and Argon IEPC-2007-181 Presented at the 30 th International Electric Propulsion Conference, Florence, Italy Jared P. Squire *, Franklin R. Chang-Díaz,

More information

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. 200 YELLOW PLACE ROCKLEDGE, FL 32955 PHONE 321-631-3550 FAX 321-631-3552 www.mainstream-engr.com TABLE OF CONTENTS CORPORATE EXPERIENCE...3

More information

Custom Engineered Design Custom Engineered Design

Custom Engineered Design Custom Engineered Design Custom Engineered Design Custom Engineered Design English Why Choose Elfab? As Europe s leading manufacturer of rupture discs, Elfab s expertise in developing custom engineered solutions has been applied

More information

Atmospheric Reentry. Introduction, Mathematical Model and Simulation

Atmospheric Reentry. Introduction, Mathematical Model and Simulation Atmospheric Reentry Introduction, Mathematical Model and Simulation Julian Köllermeier Theodor-Heuss Akademie, August 23rd 2014 A short history of human spaceflight 1944 V2 is first rocket in space 1957

More information

A. Martinez, A. L. Klebaner, J. C. Theilacker, B. D. DeGraff, M. White and G. S. Johnson

A. Martinez, A. L. Klebaner, J. C. Theilacker, B. D. DeGraff, M. White and G. S. Johnson FERMILAB-CONF-11-258-AD FERMILAB SRF CRYOMODULE OPERATIONAL EXPERIENCE A. Martinez, A. L. Klebaner, J. C. Theilacker, B. D. DeGraff, M. White and G. S. Johnson Fermi National Accelerator Laboratory Batavia,

More information

Mission Statement. A Novel Approach. Why Mass Spectrometers? Mass Spectrometry Fundamentals A STEM Education Lab Course. eramitron

Mission Statement. A Novel Approach. Why Mass Spectrometers? Mass Spectrometry Fundamentals A STEM Education Lab Course. eramitron Mass pectrometry Fundamentals A TEM Education Lab Course Mission tatement Design, Build and Test Your Own Original Mass pectrometer Philip. Berger July 19, 2013 eramitron To present the fundamentals of

More information

GEORGIAN COLLEGE. Mechanical Engineering Technology Automotive Products Design

GEORGIAN COLLEGE. Mechanical Engineering Technology Automotive Products Design Courses Required Mandatory GEORGIAN COLLEGE Mechanical Engineering Technology Automotive Products Design ADPE2000 Product Design Fundamentals ADPE2001 Virtual Prototyping ADPE3000 Advanced Product Design

More information

Screw Conveyor Manufacturing Design Engineering

Screw Conveyor Manufacturing Design Engineering Screw Conveyor Profile 2006 Screw Conveyor Manufacturing Design Design 2-D or 3D AutoCad Inventor Alibre Compatible File Types: DXF, DWG, IGES, Step, Sat, 3dm Engineered Screw Conveyors Engineered Screw

More information

Design & Manufacture of Specialty Turbomachinery

Design & Manufacture of Specialty Turbomachinery Design & Manufacture of Specialty Turbomachinery Solutions Since 1966 About Barber-Nichols Barber-Nichols, Inc. (BNI) is an internationally recognized leader in the designing, manufacturing, testing, installing,

More information

Large Systems Commissioning

Large Systems Commissioning Large Systems Commissioning, DESY CAS Vacuum in Accelerators Platja D`Aro, May 21, 2006 Special thanks to O. Gröbner 1 Outline Introduction Pump Down and Leak Check Components Check Bake Out Interlocks/Safety

More information

Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm

Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm Storage GSFC 2015 John Hawk, Sharon Peabody, and Richard Stavely NASA Goddard Space Flight Center Background The Triana

More information

Dienst Elektronische DEMO en Mechanische Ontwikkeling. The Electronic and Mechanical Support Division DEMO

Dienst Elektronische DEMO en Mechanische Ontwikkeling. The Electronic and Mechanical Support Division DEMO Dienst Elektronische en Mechanische Ontwikkeling The Electronic and Mechanical Support Division 1 An introduction to : for whom? Scientists, students, PhD-students, education & research assistants and

More information

DEVELOPMENT OF A PROTOTYPE LOW-VOLTAGE ELECTRON BEAM FREEFORM FABRICATION SYSTEM. J.K. Watson*, K.M. Taminger *, R.A. Harley *, and D.D.

DEVELOPMENT OF A PROTOTYPE LOW-VOLTAGE ELECTRON BEAM FREEFORM FABRICATION SYSTEM. J.K. Watson*, K.M. Taminger *, R.A. Harley *, and D.D. DEVELOPMENT OF A PROTOTYPE LOW-VOLTAGE ELECTRON BEAM FREEFORM FABRCATON SYSTEM J.K. Watson*, K.M. Taminger *, R.A. Harley *, and D.D. Petersen* *NASA Johnson Space Center, Houston, TX 77058 NASA Langley

More information

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems.

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems. 01211231 Conventional and Computer-Controlled Machines 3 (3-0) Prerequisite : 01208281 Conventional machine for tools: turning, drilling, tapping, milling, grinding, cutting, punching, boring and bending;

More information

The D-Wave 2X Quantum Computer Technology Overview

The D-Wave 2X Quantum Computer Technology Overview The D-Wave 2X Quantum Computer Technology Overview D-Wave Systems Inc. www.dwavesys.com D-Wave Systems Founded in 1999, D-Wave Systems is the world s first quantum computing company. Our mission is to

More information

Reliability and Availability Aspects of. the IPHI Project

Reliability and Availability Aspects of. the IPHI Project Reliability and Availability Aspects of the IPHI Project Pierre-Yves Beauvais CEA/DSM/DAPNIA for the IPHI Team 18/02/2002 Pierre-Yves Beauvais, CEA Saclay 1 Table of contents Brief description of IPHI

More information

THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES

THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES R. Beunard, GANIL, BP 55027, 14076 CAEN, CEDEX 5, France Abstract The SPIRAL2* project, located at the GANIL** facility in Caen,

More information

Firsts. A Year of. for US Delivery and Fabrication. December 2015. First Nuclear Grade Hardware Delivered

Firsts. A Year of. for US Delivery and Fabrication. December 2015. First Nuclear Grade Hardware Delivered December 2015 INSIDE: ITER Site Progress From the Project Manager Awards and Procurement Update Project Highlights 2015 Timeline A Year of Firsts for US Delivery and Fabrication US ITER achieved a number

More information

Teledyne Cable Solutions

Teledyne Cable Solutions Ruggedized Interconnect Assemblies & Application Specific Bulk Cable for Demanding Environments Teledyne Cable Solutions CABLE SOLUTIONS OIL & GAS www.teledynecablesolutions.com Teledyne Cable Solutions:

More information

Thermal analysis and measurements of spiral inductors using built-in and IR sensors

Thermal analysis and measurements of spiral inductors using built-in and IR sensors Thermal analysis and measurements of spiral inductors using built-in and IR sensors by M. Kałuża*, M. Felczak, and B. Więcek * Institute of Electronics, Lodz University of Technology, Poland, marcin.kaluza@p.lodz.pl

More information

Department of Aerospace Engineering Indian Institute of Science Bangalore

Department of Aerospace Engineering Indian Institute of Science Bangalore Department of Aerospace Engineering Indian Institute of Science Bangalore Brief Outline of Department The department of Aerospace Engineering is one of the oldest departments in the country encompassing

More information

CAE - CFD & FEA Manufacturing Support Value Engineering

CAE - CFD & FEA Manufacturing Support Value Engineering Mechanical Design Services Reverse Engineering & Rapid Prototyping CAE - CFD & FEA Manufacturing Support Value Engineering Automotive Engineering Services ISO 9001 ISO 22301 ISO/IEC 27001 Product Life-Cycle

More information

Projects and R&D activities

Projects and R&D activities Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC) Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of

More information

Lecture 7 Thermal Insulation & Cryostat Basics. J. G. Weisend II

Lecture 7 Thermal Insulation & Cryostat Basics. J. G. Weisend II Lecture 7 Thermal Insulation & Cryostat Basics J. G. Weisend II Goals Introduce conduction, convection & radiation heat transfer as they apply to cryogenics Describe design techniques to reduce heat transfer

More information

Thermal Modeling Issues Concerning the Mechanically Pumped Two-Phase CO 2 Cooling for the AMS-2 2 Tracker

Thermal Modeling Issues Concerning the Mechanically Pumped Two-Phase CO 2 Cooling for the AMS-2 2 Tracker Thermal Modeling Issues Concerning the Mechanically Pumped Two-Phase CO 2 Cooling for the AMS-2 2 Tracker A.A.Woering, A.Pauw, A.W.G. de Vries, A.A.M. Delil, The Netherlands B. Verlaat National Institute

More information

Life Sciences. Analytical Instrumentation, Clinical Diagnostics, and Medical Devices. www.durexindustries.com

Life Sciences. Analytical Instrumentation, Clinical Diagnostics, and Medical Devices. www.durexindustries.com Life Sciences Analytical Instrumentation, Clinical Diagnostics, and Medical Devices www.durexindustries.com Durex Industries is a preferred supplier of high performance radiant, convection and conduction

More information

Japan s New Control on Non-Listed Items for Military End-Use

Japan s New Control on Non-Listed Items for Military End-Use Japan s New Control on Non-Listed Items for Military End-Use September, 2008 Background Two Cabinet Orders regarding security export control were revised on 27 th of August 2008 in order to improve control

More information

FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS*

FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS* FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS* Quan-Sheng Shu, Joe Susta, Guangfeng Cheng AMAC International Inc., 12050 Jefferson Ave, Newport News, VA 23606 Abstract Various

More information

Liquid Cooling Systems

Liquid Cooling Systems Liquid Cooling Systems About Laird Laird designs and manufactures customized, performance critical products for advanced electronics and wireless systems. The company is a global market leader in the design

More information

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and

More information

Types of 3D Scanners and 3D Scanning Technologies.

Types of 3D Scanners and 3D Scanning Technologies. Types of 3D Scanners and 3D Scanning Technologies. There are many types of 3D scanners and 3D scanning technologies. Some are ideal for short range scanning while others are better suited for mid or long

More information

Nanosat 4 Competition

Nanosat 4 Competition Nanosat 4 Competition NMSUSat2 Team New Mexico State University College of Engineering Presented by Jeremy Bruggemann Topics Competition Overview Mission Overview Design Concept Tests and Analyses Hardware

More information

ni.com/vision NI Vision

ni.com/vision NI Vision ni.com/vision NI Vision The NI Vision Approach Integrate NI LabVIEW graphical system design software across the entire NI vision hardware portfolio to create a flexible, open platform that reduces development

More information

Tidal Engineering Corporation Engineering and Manufacturing Services

Tidal Engineering Corporation Engineering and Manufacturing Services Tidal Engineering Corporation Engineering and Manufacturing Services 2013 Tidal Engineering Corporation Page 1 of 10 Introduction Tidal Engineering Corporation, known for its Synergy line of environmental

More information

ORGANIC SAMPLE PREPARATION

ORGANIC SAMPLE PREPARATION ORGANIC SAMPLE PREPARATION W W W.LA BT E C H S R L.CO M WSPE MANUAL VACUUM MANIFOLD SPE Process control of the flow rate is critical to guarantee reproducible extractions. Differently then any other systems,

More information

Class of 2016 Second Year Common CORE - 2013-2014

Class of 2016 Second Year Common CORE - 2013-2014 2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75

More information

Monitoring and advanced diagnostics to enable AM fundamental understanding

Monitoring and advanced diagnostics to enable AM fundamental understanding Monitoring and advanced diagnostics to enable AM fundamental understanding Joseph J Beaman University of Texas at Austin 1 Context/Goal of AM Solid Freeform Fabrication - SFF Fabrication of complex freeform

More information

HIGH-CAPACITY HIGH TEMPERATURE SUPERCONDUCTING POWER CABLES

HIGH-CAPACITY HIGH TEMPERATURE SUPERCONDUCTING POWER CABLES HIGH-CAPACITY HIGH TEMPERATURE SUPERCONDUCTING POWER CABLES Jean-Maxime SAUGRAIN NEXANS Corporate VP Technical IASS Workshop Postdam May 13, 2011 Rationale High-capacity High Temperature Superconducting

More information

Brookhaven Magnet Division - Nuclear Physics Program Support Activities

Brookhaven Magnet Division - Nuclear Physics Program Support Activities Brookhaven - Nuclear Physics Program Support Activities Spin Program support E-Cooling R&D RIA RHIC Operations Support Funding AGS Warm Siberian Snake AGS Warm Snake Magnetic element designed and built

More information

A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators

A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators Dr Peter Hockley and Professor Mike Thwaites, Plasma Quest Limited

More information

IV. Rocket Propulsion Systems. A. Overview

IV. Rocket Propulsion Systems. A. Overview IV. Rocket Propulsion Systems A. Overview by J. M. Seitzman for AE 4451 Jet and Rocket Propulsion Seitzman Rocket Overview-1 Rocket Definition Rocket Device that provides thrust to a vehicle by accelerating

More information

DEPOSITION OF THIN ALUMINUM FILM ON ACRYLIC SUBSTRATE USING PHYSICAL VAPOR DEPOSITION TECHNIQUE (PVD)

DEPOSITION OF THIN ALUMINUM FILM ON ACRYLIC SUBSTRATE USING PHYSICAL VAPOR DEPOSITION TECHNIQUE (PVD) DEPOSITION OF THIN ALUMINUM FILM ON ACRYLIC SUBSTRATE USING PHYSICAL VAPOR DEPOSITION TECHNIQUE (PVD) Marwa A. Elajel *, Sana M. Sbeta ** Plasma Research Lab., Tripoli Libya E-mail: * marwa_ali_77@yahoo.com,

More information

WEIGHTLESS WONDER Reduced Gravity Flight

WEIGHTLESS WONDER Reduced Gravity Flight WEIGHTLESS WONDER Reduced Gravity Flight Instructional Objectives Students will use trigonometric ratios to find vertical and horizontal components of a velocity vector; derive a formula describing height

More information

Energy Systems Test Area (ESTA) Electrical Power System Test Operations Test Request Worksheet

Energy Systems Test Area (ESTA) Electrical Power System Test Operations Test Request Worksheet Energy Systems Test Area (ESTA) Electrical Power System Test Operations Test Request Worksheet This worksheet will facilitate the development of a cost and schedule estimate for utilizing the ESTA Electrical

More information

The ASG s MRI 0.5T cryogenic free magnet

The ASG s MRI 0.5T cryogenic free magnet In spite of its recent discovery, MgB 2 has not only been routinely manufactured into long conductors, but useful examples of practical applications have been already realized. Some of them, using Columbus

More information

DESIGN & PROJECT MANAGEMENT

DESIGN & PROJECT MANAGEMENT AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,

More information

Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between. T E C H N O L O G I E S. High Volume Hydromat.

Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between. T E C H N O L O G I E S. High Volume Hydromat. MACHINING T E C H N O L O G I E S High Volume Hydromat CNC Milling CNC Swiss Machining CNC Turning Engraving Secondary Operations Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between.

More information

Marmon Engineered Wire & Cable is a unique group of 13 major cable manufacturers whose synergy offers tremendous breadth of product offering,

Marmon Engineered Wire & Cable is a unique group of 13 major cable manufacturers whose synergy offers tremendous breadth of product offering, Marmon Engineered Wire & Cable is a unique group of 13 major cable manufacturers whose synergy offers tremendous breadth of product offering, advanced R&D, continuous innovation and the financial strengths

More information

VITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A

VITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as

More information

ACE. Automated Soil CO 2 Exchange System. Soil flux: an important component of total carbon budget

ACE. Automated Soil CO 2 Exchange System. Soil flux: an important component of total carbon budget ACE Automated Soil CO 2 Exchange System Automated operation Automatically exposes soil area between measurements CO 2 analyser in chamber Highly accurate CO 2 IRGA housed directly inside soil chamber assembly

More information

Thermal and Waterjet Cutting Processes

Thermal and Waterjet Cutting Processes Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the primary thermal cutting and waterjet cutting processes and the

More information

Non-Destructive Testing

Non-Destructive Testing Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network

More information

RF & Microwave Contract Manufacturing

RF & Microwave Contract Manufacturing RF & Microwave Contract Manufacturing Microwave Filter Company, Inc. Microwave Filter Company (MFC) is a low-to-mid volume contract manufacturer providing a unique combination of RF and microwave engineering

More information

ngenieros Ingenieros Asociados De Control S.L.

ngenieros Ingenieros Asociados De Control S.L. ngenieros sociados de ontrol 1 Company founded in 1985 to serve commercial and technical assistance in the fields of instrumentation, control and installation for all types of industries. We offer top

More information

North Korean Long-range Missile Debris Survey

North Korean Long-range Missile Debris Survey North Korean Long-range Missile Debris Survey January 18, 2013 Ministry of Defense (English translation by D. Wright, revised 1/27/13) General Period: December 14, 2012 January 9, 2013 Venue: Agency for

More information

Benchmark. WASH l RINSE l PASSIVATE l DRY. Benchmark Precision Aqueous Cleaning Systems Modular Design, Superior Clean, Unwavering Service

Benchmark. WASH l RINSE l PASSIVATE l DRY. Benchmark Precision Aqueous Cleaning Systems Modular Design, Superior Clean, Unwavering Service Benchmark WASH l RINSE l PASSIVATE l DRY Benchmark Precision Aqueous Cleaning Systems Modular Design, Superior Clean, Unwavering Service The Standard By Which All Others Are Judged The Branson Benchmark

More information

ME 239: Rocket Propulsion Introductory Remarks

ME 239: Rocket Propulsion Introductory Remarks ME 239: Rocket Propulsion Introductory Remarks 1 Propulsion Propulsion: The act of changing a body s motion from mechanisms providing force to that body Jet Propulsion: Reaction force imparted to device

More information

Site Planning Guide Aug 2011

Site Planning Guide Aug 2011 Site Planning Guide Aug 2011 Document Number : Phoenix Site Planning Guide Aug 2011 (2).docx Table of Contents 1. INTRODUCTION... 2 2. SERVICES REQUIRED... 3 3. ENVIRONMENTAL REQUIREMENTS... 5 4. SAMPLE

More information

Cert No. AS7114. www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES

Cert No. AS7114. www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES Cert No. AS7114 www.freemanandproctor.co.uk DESIGNERS & MANUFACTURERS OF PRECISION FABRICATED TUBULAR ASSEMBLIES Freeman & Proctor established in 1949 to manufacture high quality tubular assemblies for

More information

جامعة البلقاء التطبيقية

جامعة البلقاء التطبيقية AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First

More information

LyoBeta. R+D Freeze-Dryers

LyoBeta. R+D Freeze-Dryers LyoBeta R+D Freeze-Dryers LyoBeta series A Responsible Choice New demands in R+D centers are related to scale-up feasibility and quality of procedures and research methods. FDA investigators consider that

More information

Application of ATHENA/RELAP to Fusion Loss-of-cooling Accidents

Application of ATHENA/RELAP to Fusion Loss-of-cooling Accidents Application of ATHENA/RELAP to Fusion Loss-of-cooling Accidents Brad Merrill Fusion Safety Program, INEEL 2000 Relap5 International Users Seminar Jackson Hole, WY, September 12-14, 2000 PRESENTATION OUTLINE

More information

GRCC Manufacturing Technology

GRCC Manufacturing Technology Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g

More information

Engineering & Technology High School. Course Description

Engineering & Technology High School. Course Description & Technology High School The Following Courses will be offered for the High School program under & Technology for the year 2013 & 14 year. These courses are the First Phase for the development of new Pathways,

More information

Solutions Manufacturing Performance

Solutions Manufacturing Performance Solutions Manufacturing Performance Let s partner up for your project At RI Research Instruments we develop, design, manufacture and test high performance components and systems to the needs of our customers

More information

National Performance Evaluation Facility for LADARs

National Performance Evaluation Facility for LADARs National Performance Evaluation Facility for LADARs Kamel S. Saidi (presenter) Geraldine S. Cheok William C. Stone The National Institute of Standards and Technology Construction Metrology and Automation

More information

What is Needed in Experimental Methods Instruction

What is Needed in Experimental Methods Instruction What is Needed in Experimental Methods Instruction Perspective from a Government Laboratory Richard Anthony Rolf Sondergaard AFRL/PRTT Air Force Research Laboratory Propulsion Directorate Turbine Branch

More information

Printed Circuit Board Quick-turn Prototyping and Production

Printed Circuit Board Quick-turn Prototyping and Production Printed Circuit Board Quick-turn Prototyping and Production Who We Are Bay Area Circuits has been serving the Printed Circuit Board (PCB) manufacturing needs of high-tech electronics manufacturers, contract

More information

Career history (Leadership and Management Related)

Career history (Leadership and Management Related) Personal summary Curriculum Vitae- Dr Michael Corbett Name Skill Set Academic Qualifications Dr Michael Corbett Physicist, Propulsion Scientist, Space Systems Engineer Qualification Institution Date Bachelor

More information

Engineering & Testing Services. Hydraulic Fitting Design and Hydro-Mechanical Testing

Engineering & Testing Services. Hydraulic Fitting Design and Hydro-Mechanical Testing Engineering & Testing Services Hydraulic Fitting Design and Hydro-Mechanical Testing Aerofit, Inc. APT Laboratory 1425 South Acacia Avenue Fullerton, CA 92831 Main: 714-521-5060 Fax: 714-535-9862 Our Company

More information

STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA

STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA We Listen to Your Needs For over 35 years R-V Industries, Inc. has partnered our engineering and manufacturing expertise with customer ideas to produce

More information

INTA Renewable Energy Area activities

INTA Renewable Energy Area activities INSTITUTO NACIONAL DE TECNICA AEROESPACIAL 1. Introduction INTA Renewable Energy Area activities INTA, the National Institute for Aerospace Technology in Spain, is a public agency devoted to aerospace

More information

The Space Shuttle: Teacher s Guide

The Space Shuttle: Teacher s Guide The Space Shuttle: Teacher s Guide Grade Level: 6-8 Curriculum Focus: Astronomy/Space Lesson Duration: Two class periods Program Description This video, divided into four segments, explores scientists'

More information

Influence of Belt Furnace on Glass-to-Metal Seal Process

Influence of Belt Furnace on Glass-to-Metal Seal Process Influence of Belt Furnace on Glass-to-Metal Seal Process Introduction The glass, under suitable conditions, will bond well to a wide variety of metals and alloys which has led to the development of many

More information

Graduate Programs in Mechanical and Aerospace Engineering

Graduate Programs in Mechanical and Aerospace Engineering Graduate Programs in Mechanical and Aerospace Engineering Space System Engineering Aerodynamics & Computational Fluid Dynamics (CFD) Aerospace Structures and materials Dynamics, Vibration and Controls

More information

HFM Heat Flow Meter Thermal Conductivity Analyzer

HFM Heat Flow Meter Thermal Conductivity Analyzer HFM Heat Flow Meter Thermal Conductivity Analyzer Introduction An insulating material is a material with low thermal conductivity, which in the construction industry, equipment manufacturing, or the production

More information

Design/Build and Equipment Integration

Design/Build and Equipment Integration Design/Build and Equipment Integration PROFESSIONAL ENGINEERING AND DESIGN It starts with your challenge. And ends with a custom-tailored REL solution. REL, Inc. provides professional engineering services

More information

Facilities Perspectives

Facilities Perspectives Facilities Perspectives of the Association Euratom-FZK - Overview and Mission Orientation - Important Facility Enhancements Facility Review Meeting May 27-28, 2008 M. Thumm, Deputy Head, Topic Fusion Technology,

More information

The commissioning of the LHC: first the technical systems, then the commissioning with beam

The commissioning of the LHC: first the technical systems, then the commissioning with beam The commissioning of the LHC: first the technical systems, then the commissioning with beam Roberto Saban 4. Ulusal Parçacık Hızlandırıcıları ve Uygulamaları Kongresi 30 Ağustos 1 Eylül 2010, Bodrum -

More information

Amphenol. High Speed Solutions CABLE ASSEMBLIES

Amphenol. High Speed Solutions CABLE ASSEMBLIES Amphenol High Speed Solutions CABLE ASSEMBLIES amphenol aerospace located in sidney, ny 1 One of the largest manufacturers of interconnect products in the world. WE design manufacture market INTERCONNECT

More information

An Industrial Physics Toolkit. Bill milo Cummings Staff Engineer, Iridigm Display Corporation

An Industrial Physics Toolkit. Bill milo Cummings Staff Engineer, Iridigm Display Corporation An Industrial Physics Toolkit Bill milo Cummings Staff Engineer, Iridigm Display Corporation Outline Physicists in Industry Where Do They Come From? How do they get there? What do they do? What is Iridigm?

More information

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines On customer request it is possible to supply: Benches for PCB Oven for PCB Chemicals

More information

FORMATION DAMAGE AND WELL TREATMENT SYSTEM

FORMATION DAMAGE AND WELL TREATMENT SYSTEM FORMATION DAMAGE AND WELL TREATMENT SYSTEM FDWTS-10K Includes ability to test Liquid Permeability & Gas Permeability Fines migration & critical velocity Static Filtration Drilling mud invasion evaluation

More information

Auditing a Printed Circuit Board Fabrication Facility Greg Caswell

Auditing a Printed Circuit Board Fabrication Facility Greg Caswell Auditing a Printed Circuit Board Fabrication Facility Greg Caswell Introduction DfR is often requested to audit the PCB fabrication process of a customer s supplier. Understanding the process variations

More information

NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER

NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER Understanding what a PAC is starts from the understanding of PLC. A PLC is a Programmable Logic while

More information

INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE

INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE Journal of KONES Powertrain and Transport, Vol. 18, No. 3 2011 INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE Mariusz Domaga a, Edward Lisowski Cracow University of Technology, Department of Mechanical

More information

Max. Length of HTS Cables in the Future

Max. Length of HTS Cables in the Future Max. Length of HTS Cables in the Future K. Schippl, Nexans Deutschland Industries, Hannover, Germany TOPICS: Limitation of the cable design: 1. Physical limitations 2. Shipping limitations 3. Maintenance

More information

A Practical Guide to Free Energy Devices

A Practical Guide to Free Energy Devices A Practical Guide to Free Energy Devices Part PatE17: Last updated: 24th November 2006 Author: Patrick J. Kelly This is a patent application from Stephen Meyer, brother of the late Stan Meyer. While this

More information

Los Angeles Trade Technical College Student Employment Center C 107A Machine Shop-CNC. Part Time

Los Angeles Trade Technical College Student Employment Center C 107A Machine Shop-CNC. Part Time Part Time MAINTENANCE MECHANIC Job Number:756 Hours/Days: / (M- S) (3shifts) Salary: $18-$25 Approximate Location: Los Angeles, Ca Requirements: High School diploma or a GED. Bachelor's or Associate's

More information

2385 East Mall, Vancouver Tel: (604) 822-6598 coop.japan@ubc.ca BC, Canada V6T1Z4 Fax: (604) 822-3449 www.thecoopjapanprogram.com

2385 East Mall, Vancouver Tel: (604) 822-6598 coop.japan@ubc.ca BC, Canada V6T1Z4 Fax: (604) 822-3449 www.thecoopjapanprogram.com Azbil Corporation (Job #: Az-AAC3) Canada-Japan Co-op Student Job Developing one of software programs described below: Client program for the server on the cloud - REST-JSON protocol - Java - AJAX Application

More information

Residential/Small Commercial Monitoring of Solar Thermal- Geothermal Integrated Systems

Residential/Small Commercial Monitoring of Solar Thermal- Geothermal Integrated Systems Residential/Small Commercial Monitoring of Solar Thermal- Geothermal Integrated Systems Prepared for 2013 Canadian GeoExchange Conference and Trade Show May 2-3, 2013 Simon Fraser University, Burnaby,

More information

TOPO Trajectory Operations Officer

TOPO Trajectory Operations Officer ISS Live! was developed at NASA s Johnson Space Center (JSC) under NASA Contracts NNJ14RA02C and NNJ11HA14C wherein the U.S. Government retains certain rights. Console Handbook TOPO Trajectory Operations

More information

EcoCWave. The all-round talent for aqueous part cleaning. www.durr.com

EcoCWave. The all-round talent for aqueous part cleaning. www.durr.com EcoCWave The all-round talent for aqueous part cleaning www.durr.com Part cleaning as a value-adding value-adding process process Increasing demands on cleanliness in component manufacturing impose a need

More information

Ceralink Capabilities and Opportunities

Ceralink Capabilities and Opportunities Ceralink Capabilities and Opportunities Dr. Holly Shulman President, Materials Scientist Ceralink Inc. Rensselaer Technology Park 105 Jordan Rd. Troy, New York 12180 holly@ceralink.com www.ceralink.com

More information

AMSC s Superconductor Cable Technologies for Electric Utilities

AMSC s Superconductor Cable Technologies for Electric Utilities International Workshop 2014 AMSC s Superconductor Cable Technologies for Electric Utilities Michael Ross, P.E. Managing Director of Superconductor Power Systems AMSC Corporate Facts Headquartered in MA,

More information

Say Yes To Aerospace in Virginia. Aerospace VIRGINIA ECONOMIC DEVELOPMENT PARTNERSHIP

Say Yes To Aerospace in Virginia. Aerospace VIRGINIA ECONOMIC DEVELOPMENT PARTNERSHIP Say Yes To in Virginia 1 Virginia s Industry Employs 30,300 people at 256 firms, primarily in Technology and Equipment Key aerospace manufacturers include Moog, Orbital Sciences, Rolls-Royce Leading aerospace

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

Thermal Modeling and Analysis of a Wind Turbine Generator

Thermal Modeling and Analysis of a Wind Turbine Generator Thermal Modeling and Analysis of a Wind Turbine Generator Authors: Dr Bogi Bech Jensen (Associate Professor) Technical University of Denmark Mathew Lee Henriksen (PhD student) Technical University of Denmark

More information

GOM Optical Measuring Techniques. Deformation Systems and Applications

GOM Optical Measuring Techniques. Deformation Systems and Applications GOM Optical Measuring Techniques Deformation Systems and Applications ARGUS Forming Analysis ARGUS Deformation analysis in sheet metal and forming industry Forming Characteristics of Sheet Metals Material

More information

Department of Mechanical Engineering

Department of Mechanical Engineering About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs

More information