SOFTWARE & SERVICES. English TOTAL

Transcription

1 SOFTWARE & SERVICES English TOTAL S H I P C A R E

2 SOF T WAR E & SERVICES TOTA L S H I P C A R E Comprehensive Software and Services for Total Ship Care DESIGN HULL PrimeShip-IPCA MACHINERY Integrated System for Ship Performance Capability Shaft Alignment Analysis Program PrimeShip-NAPA Manager NK-Customized Program for NAPA PrimeShip-HULL Rule Calculation System and Direct Strength Assessment System PrimeShip-SHAFT PrimeShip-CRANK Crankshaft Stress Calculation Service PrimeShip-TORRES Shaft Torsional Vibration Analysis Service PrimeShip-CAD Interface Interface Program for Data Linkage between 2D/3D CAD and Rule Calculation System PrimeShip-CTF for PSPC CONSTRUCTION Coating Technical File (CTF) Preparation Suppor t System MAINTENANCE PrimeShip-HULLCare Hull Maintenance Information Service PrimeShip-CAP Condition Assessment Program OPERATION PrimeShip-OAS Oil Analysis Service Fleet Management Support Fleet Management Suppor t Software ClassNK CMAXS Machinery Maintenance System ClassNK-PEERLESS Software for Optimal Ballast Water Management Systems Installation 01

3 ClassNK develops software and services to provide comprehensive vessel support, using vast technical experience gained over many years as a classification society. ClassNK software and services can support vessels from design stage, through operation, maintenance, and surveys, right up to recycling. OPERATION ENVIRONMENT PrimeShip-CHEMISYS PrimeShip-GREEN/SRM Integrated Database System for Chemical Products Ship Recycling Management PrimeShip-DG/Bulk Cargo PrimeShipGREEN/MinPower IMDG/IMSBC Loading Requirement Program Software for Assessment of Minimum Propulsion Power INFORMATION SUPPORT NK-PASS Electric Plan Approval System PrimeShip-GREEN/ProSTA e-product Software for Progressive Speed Trial Analysis Online Application Service for Survey of Material and Equipment PrimeShip-GREEN/EEOI NK-SHIPS EEOI Calculation and Analysis System Online Status Information Service for Class and Statutory Survey/ ISM and ISPS Audit/ MLC Inspection PrimeShip-ETAS ClassNK-NAPA GREEN Emergency Technical Assistance Service Comprehensive Software Solution for Eco-Efficient Operations e-application Online Application System for Surveys and Audits ClassNK Archive Center Archive Center for As-built Drawings Storage Service/ GBS-Ship Construction File Storage Service 02

4 H U L L S O F T W A R E & S E R V I C E S DESIGN CONSTRUCTION OPERATION Contact Hull Department hld@classnk.or.jp Tel: Hull Rules Development Department dhd@classnk.or.jp Tel: Survey Operations Headquarters svd@classnk.or.jp Tel: NAPA Customer Service customer.service@napa.fi Tel:

5 HULL PrimeShip-IPCA Integrated System for Ship Performance Capability PrimeShip-IPCA is a Windows OS-based software package that calculates water displacement, trim, stability, longitudinal strength and other performance factors of a vessel during the design stage. The software allows calculations at design stage to be carried out in line with class rules, helping reduce design lead times. The software contains design software Design-IPCA and calculation software for onboard loading computer systems Onboard-IPCA Calculation Engine, offering full support coverage during design and operation. Contact Hull Department PrimeShip-NAPA Manager NK-Customized Program for NAPA PrimeShip-NAPA Manager (Statutory Compliance Manager for NAPA system users) is a program offered free of charge that uses 3D vessel models created during the design stage using NAPA software to calculate stability, longitudinal strength and other factors based on class rules. The program can be used in conjunction with NAPA software to create drawings for plan approval to help reduce design lead times. NAPA software is required to use this program. 3D Model on NAPA Database Statutory Compliance Manager Documents for Approval Damage Stability Calculation Loading Manual Stability Information Contact Hull Department, NAPA Customer Service PrimeShip-HULL Rule Calculation System and Direct Strength Assessment System PrimeShip-HULL is a free software package that contains programs for rule calculation and direct strength calculation based upon structural rules. The PrimeShip-HULL (HCSR), PrimeShip-HULL (Rules) and PrimeShip-HULL (DSA) programs allow designers to perform calculations and assessments based on IACS Common Structural Rules (CSR) and ClassNK Rules to help reduce design lead times. A dedicated homepage and online support desk are available to provide users with technical support and other assistance as needed. Note: Either Patran and MSC.Nastran (not included), or HyperWorks (not included) is needed to run PrimeShip-HULL (DSA). Contact Hull Department or Hull Rules Development Department PrimeShip-CAD Interface Interface Program for Data Linkage between 2D/3D CAD and Rule Calculation System PrimeShip-CAD Interface is a program provided free of charge to link 2D/3D CAD software with CSR-based rule calculation software. The program allows users to convert data from CAD and performance capability calculation software for use directly with other software to help prevent design errors. PrimeShip-CAD Interface can link data between various types of software. Overall Structure of Data Linkage PrimeShip-HULL Rules PrimeShip-HULL PrimeShip-HULL Rules Interface PrimeShip-CAD XML Schema Group XML for Ship3D XML for Performance PrimeShip-HULL Rules Contact Hull Rules Development Department PrimeShip-CAD 3D viewer NAPA Steel NAPA IPCA DXF,DWG PrimeShip-CTF for PSPC Coating Technical File (CTF) Preparation Support System PrimeShip-CTF for PSPC is a cloud-based support tool provided free of charge to help create coating technical files. With this software users can compile and manage logs and data for onboard CTFs via the internet in line with the IMO Performance Standards for Protective Coatings. PrimeShip-CTF for PSPC Coating Technical File CTF Contact Survey Operations Headquarters Shipyard User Access anywhere in the world via Internet Server in Data Center Report Output 04

6 MACHINERY S O F T W A R E & S E R V I C E S DESIGN CONSTRUCTION OPERATION Contact Machinery Department mcd@classnk.or.jp Tel: Marine Industrial Service Department mid@classnk.or.jp Tel:

7 PrimeShip-SHAFT Shaft Alignment Analysis Program MACHINERY PrimeShip-SHAFT is a program provided free of charge to help designers comply with ClassNK s Guidelines on Shafting Alignment and analyze shaft alignment based on the Guidelines. Using this software, designers can easily calculate alignment in line with ClassNK rules and guidance, as well as determine the optimal position for shaft bearings. Finite Element Analysis Calculation Software Relative displacement (mm) Distance from engine room bulkhead (m) Relative displacement (mm) Measurement Distance from engine room bulkhead (m) Contact Machinery Department PrimeShip-CRANK Crankshaft Stress Calculation Service PrimeShip-CRANK is a fee-based service that offers strength evaluations of diesel engine crankshafts in line with ClassNK and IACS rules. Users can determine if a crank shaft meets strength requirements and receive a statement of compliance through this service. Contact Machinery Department PrimeShip-TORRES Shaft Torsional Vibration Analysis Service PrimeShip-TORRES is a fee-based service that analyzes shaft torsional vibration in line with ClassNK and IACS rules. Users can evaluate torsional vibration at the design stage and receive analysis reports indicating any occuring torsional vibration stress and allowable values through this service. Comprehensive Analysis Reports Evaluation of Essential Items Relevant to Torsional Vibration Contact Marine and Industrial Service Department or Machinery Department 06

8 OPER ATION S O F T W A R E & S E R V I C E S DESIGN CONSTRUCTION OPERATION Contact Natural Resources and Energy Department ned@classnk.or.jp Tel: Material and Equipment Department eqd@classnk.or.jp Tel: Survey Operations Headquarters svd@classnk.or.jp Tel:

9 PrimeShip-CHEMISYS Integrated Database System for Chemical Products OPERATION PrimeShip-CHEMISYS is a fee-based software package offering comprehensive support for designers, owners, and managers of chemical tankers during design, construction, and operation. PrimeShip-CHEMISYS (Search & Data) allows users to select and view what type of cargoes can be carried by each vessel. PrimeShip-CHEMISYS (Onboard) offers support for cargo loading plans and loading operations. Overview of Design Support System [for designers] Database Chemical tankers Chemical products SEARCH Design data Chemical products which can/cannot be loaded Output List of chemical products which can be loaded List of chemical products which cannot be loaded List of tank structure and equipment/installations Contact Natural Resources and Energy Department PrimeShip-DG/Bulk Cargo IMDG/IMSBC Loading Requirement Program PrimeShip-DG/Bulk Cargo is a fee-based software package that allows users to create lists of loadable cargoes (solid bulk cargoes and dangerous goods) based on the structure and facilities of vessels in line with SOLAS and the IMSBC Code. Users can easily identify which cargo types can be loaded on each type of vessel, helping expedite cargo planning. Users can also perform reverse searches to identify which type of vessel structures or facilities would be appropriate for carrying specific types of cargoes, and create a cargo vessel database to expedite cargo planning. Using PrimeShip-DG/Bulk Cargo Input vessel particulars including construction and loading equipment information Results Loadable cargoes Non-loadable cargoes, Substandard items Particulars Check construction and equipment details Loadable cargo list Contact Material and Equipment Department PrimeShip-ETAS Emergency Technical Assistance Service PrimeShip-ETAS is fee-based vessel support service offered by ClassNK to shipowners to provide assistance during accidents including but not limited to grounding, collision, and explosions, to help ensure the safety of vessels and to protect and limit any damage to the marine environment. ClassNK ETAS works in close communication with shipowners and salvagers during marine casualties offering advice to ensure salvage operations are carried out safely with as little impact to the environment as possible. The ETAS team is comprised of experienced surveyors on hand 24/7 to provide emergency assistance. 24 hours a day, 365 days a year Accident Salvage Successful Salvage ETAS Team Stability at Damage Condition & Residual Longitudinal Strength Report & Advice of Countermeasures Occasional Survey - Confirm ship s condition - Temporary Repair Plan - Ascertain Seaworthiness to sail to Repair Port/Yard Damage Stability Calculation GO TO REPAIR YARD ETAS Advice Contact Survey Operations Headquarters 08

10 MAINTENANCE S O F T W A R E & S E R V I C E S DESIGN CONSTRUCTION OPERATION Contact Classification Department cldji@classnk.or.jp Tel: Hull Rules Development Department dhd@classnk.or.jp Tel: Marine Industrial Service Department mid@classnk.or.jp Tel: Survey Operations Headquarters svd@classnk.or.jp Tel: Practical R&D Promotion Department rx-sec@classnk.or.jp Tel:

11 PrimeShip-HULLCare Hull Maintenance Information Service PrimeShip-HULLCare is a service that compiles and categorizes survey data collected from across ClassNK s global service network to provide hull maintenance information for each vessel registered for the Enhanced Survey Program scheme. Users can verify the history of the hull condition for each of its vessels, and create an appropriate maintenance management plan. PrimeShip-HULLCare is an internet based service, which allows users access 24/7 from anywhere in the world. In addition, an optional fee-based service for 3D models is also available. Contact 2D: Classification Department / 3D: Hull Rules Development Department PrimeShip-HULLCare/2D internet Measurement record table Color-coded graph of measured points PrimeShip-HULLCare/3D Model (Optional service) Highlighted cells show substantially corroded parts MAINTENANCE PrimeShip-CAP Condition Assessment Program Sample for Rating PrimeShip-CAP (Condition Assessment Program) is a fee-based service that allows users to assess and verify whether hull conditions meet or exceed class rules and international regulations. Users can obtain a 1 (highest) to 4 (lowest) grade of their hull condition based on onboard surveys, as well as receive comprehensive reports and certificates through this service. Hulls awarded condition levels of grade 2 and above rank very highly, verifying maintenance conditions are satisfactory, which is particularly useful for chartered vessels. Contact Marine and Industrial Service Department PrimeShip-OAS Oil Analysis Service Fuel Oil Analysis PrimeShip-OAS is a fee-based fuel oil and stern tube lubricant analysis service. The service offers fuel oil analysis based on ISO and JIS standards, and lubricant analysis as part of propeller shaft condition monitoring, allowing users to more effectively manage and maintain their vessels. Contact Marine and Industrial Service Department Combustion test using FIA-100FCA Standard: IP541/06 Fleet Management Support Fleet Management Support Software ClassNK s Fleet Management Support is a program provided free of charge to help users manage their NK-classed vessels. This software works in conjunction with the classed vessel and ISM/ISPS online information service NK-SHIPS, allowing users to confirm the status of any required surveys, audits or certifications, to easily manage vessel maintenance. FMS Ship Monitoring Information Exchange via Internet Makers FMS Due Date Management Ship Management Company Orders Contact Survey Operations Headquarters Provide Services Service Engineers ClassNK Flag State ClassNK CMAXS Machinery Maintenance System ClassNK CMAXS is fee-based cloud system offering users software and services to support onboard machinery maintenance and monitoring. The system uses data collected by sensors installed onboard vessels for the early detection of abnormalities and condition monitoring for machinery. Additionally, the system shows onboard machinery maintenance plans and allows users to input the results of maintenance work via a user-friendly interface. The data is stored on a cloud system, allowing all relevant users access to the information anytime from anywhere in the world. Contact Marine and Industrial Service Department System Concept Synchronized Planned maintenance management Spare parts inventory management Condition diagnosis data CMAXS cloud database Shipping company Ship management company NK Internet Equipment manufacturer Synchronized Planned maintenance management Spare parts inventory management Condition diagnosis data Maintenance applications management and condition diagnosis Onboard LAN system Crew Crew Crew ClassNK-PEERLESS Software for Optimal Ballast Water Management Systems Installation ClassNK-PEERLESS is a fee-based software program that allows users to dramatically shorten the design process for installing ballast water management systems on existing vessels. Factors such as lack of engine room space and complicated piping make installing ballast water management systems on existing vessels a difficult process. ClassNK-PEERLESS uses data gathered from 3D laser scanners to create highly accurate 3D models, greatly simplifying the process to cut down on design lead times. Contact Practical R&D Promotion Department 10

12 E N V I RO N M E NT S O F T W A R E & S E R V I C E S DESIGN C O N S T RU C T I O N O P E R AT I O N Contact Ship Recycling Team srpt@classnk.or.jp EEDI Department eedi@classnk.or.jp Tel: Marine and Industrial Service Department mid@classnk.or.jp Tel: NAPA sales@napa.fi Tel:

13 PrimeShip-GREEN/SRM Ship Recycling Management PrimeShip-GREEN/SRM is a web-based system offering support to the industry for the Ship Recycling Convention. The system is provided free of charge to shipbuilders and suppliers. PrimeShip-GREEN/SRM facilitates information exchange between shipbuilders, shipping companies and suppliers at the development and maintenance of Inventory of Hazardous Materials (IHM: list indicating quantity & location of hazardous materials on board) generating IHM automatically with minimum additional input, drastically reducing the burden on the industry. Supplier Shipbuilder NK Shipowner SDoC MD MD Library Request / Respond Acting Registration Ship Purchase List MD Ship Info. Ship Location Info. IHM Location Apply / Approve Transfer the Ship Data ENVIRONMENT Contact Ship Recycling Team Concept PrimeShip-GREEN/MinPower Software for Assessment of Minimum Propulsion Power PrimeShip-GREEN/MinPower is a program provided free of charge to help users assess the minimum propulsion power for bulk carriers, tankers or combination carriers in adverse weather conditions in accordance with IMO regulations. The software allows users to easily assess the minimum propulsion power taking into account factors such as added resistance in irregular waves, and automatically create graphs for class approval, helping to greatly reduce design lead times. Contact EEDI Department PrimeShip-GREEN/ProSTA Software for Progressive Speed Trial Analysis PrimeShip-GREEN/ProSTA is a free program that allows users to analyze ship speed correction at progressive speed trials taking into account factors such as wind, current, wave, shallow water, displacement, water temperature and water density in compliance with ISO 15016:2015. The software allows users to easily analyze the speed correction at progressive speed trials, and automatically creates graphs for class approval, helping to greatly reduce design lead times. Estimation of Reference Ship Speed Vref for EEDI Speed correction for wind, waves, current, shallow water, displacement, water temperature and water density Vref Contact EEDI Department PrimeShip-GREEN/EEOI EEOI Calculation and Analysis System PrimeShip-GREEN/EEOI is a free software package that allows users to evaluate GHG (CO2) emission levels during operation, enabling users to calculate and analyze their Energy Efficiency Operational Indicator (EEOI). The software gives users an understanding of the energy efficiency of a vessel during operation, allowing for operation-specific vessel analysis and management. Contact EEDI Department Analysis of Calculation Results ClassNK-NAPA GREEN Comprehensive Software Solution for Eco-Efficient Operations ClassNK-NAPA GREEN is an advanced shipping solution for eco-efficient operations. It increases fleet efficiency by providing improved transparency, performance evaluation and dynamic optimization tools for route, speed and trim resulting in safe and efficient voyage execution. Contact Marine and Industrial Service Department, NAPA 12

14 INFORMATION SUPPORT S O F T W A R E & S E R V I C E S DESIGN CONSTRUCTION OPERATION Contact Hull Department hld@classnk.or.jp Tel: Information Technology Department tid@classnk.or.jp Tel: Machinery Department mcd@classnk.or.jp Tel: Information Service Department isd@classnk.or.jp Tel: Classification Department cld@classnk.or.jp Tel: Survey Operations Headquarters svd@classnk.or.jp Tel: Safety Management Systems Department smd@classnk.or.jp Tel: NK Archive Center Project Team nk.archive@classnk.or.jp

15 NK-PASS Electric Plan Approval System NK-PASS is a free service that allows shipyards, equipment manufacturers and designers to replace printed plans and drawings with electronic versions that can be submitted for class approval and returned electronically. Users can confirm the status of submitted drawings and approval results in real time via the internet, greatly reducing the time and costs associated with approval (such binding, postage, etc.), allowing users to manage their plans and drawings more efficiently. The optional NK-PASS EDI (Exchange Data Interface) service is a standard interface linked to customer s own system that allows users to exchange electronic drawings between NK-PASS and the customer s system. Contact Hull Department or Information Technology Department Shipbuilder, Manufacturer, Ship Designer etc. Send eplans Download approved eplans, Refer to comments Submit printed plans Notify completion of examination by Examine eplans Examine plans and input comments INFORMATION SUPPORT e-product Online Application Service for Survey of Material and Equipment e-product is a free service allowing users to apply for material and equipment surveys via the Internet. Users can view the status of their applications, and can easily send applications for a wide range of surveys using the application history copy function. Contact Machinery Department NK-SHIPS Online Status Information Service for Class and Statutory Survey/ ISM and ISPS Audit/MLC Inspection Ship Survey Records and Survey History NK-SHIPS is a free service provided to managers and owners of ClassNK registered vessels to manage information such as survey/audit/inspection statuses for each ship, periodic survey/audit/inspection items, and designated dates for surveys/audits/ inspections via the internet. The service allows users to easily manage and plan surveys/audits/inspections for each vessel or their entire fleet. A Due Date Notice Service is also available, sending users notification of Survey/Audit/Inspection due dates. Contact Where to apply Information Service Department / Inquiries for the Service & Operation: Classification Department or Safety Management Systems Department e-application Online Application System for Surveys and Audits e-application is a service provided free of charge allowing users to apply for class and statutory surveys, ISM/ISPS audits, and onboard MLC inspections for existing vessels as well as ISM audits for their company. The service allows users to automatically configure required surveys for each vessel or entire fleets as well as apply for surveys and audits online through ClassNK s NK-SHIPS service. An NK-SHIPS user registration is required in order to use this service. Users can use NK-SHIPS immediately after registration. Online Application Window for Surveys and Audits Link with NK-SHIPS Contact Where to apply: Information Service Department / Inquiries for the Service & Operation: Survey Operations Headquarters or Safety Management Systems Department ClassNK Archive Center Archive Center for As-built Drawings Storage Service/ GBS-Ship Construction File Storage Service ClassNK Archive Center is a cloud-based 24/7 service for storing and accessing various vessel plans and other detailed information related to a vessel's construction over a vessel s lifetime. The ClassNK Archive Center helps reduce administrative costs by allowing users to manage and view stored information via the internet, greatly enhancing the efficiency and practicality of ship management. The highly secure system protecting the data is also compliant with the IMO GBS "Ship Construction File" requirements expected to come into force in the near future, covering customers for the new regulations. Contact Archive Center Project Team 14

16 SOFTWARE & SERVICES English 4-7 Kioi-cho, Chiyoda-ku, Tokyo Japan Tel: July 2015