ESPACE ALARM( ) Peace of mind is yours W I R E L E S S S E C U R I T Y S Y S T E M S

Transcription

1 ESPACE ALARM( ) Peace of mind is yours W I R E L E S S S E C U R I T Y S Y S T E M S

2

3 Peace of mind... for your family, all day every day You want protection for your family and your property. It s a question of common sense and responsibility. And you know that fitting your home with an efficient alarm system is not something to be put off. Knowing you are all safe will bring peace of mind to everybody in your family, whatever they are doing. So, in order to protect your home you need to install a security system. You don t want to take any risks when choosing the type of system. The Daitem Espace alarm has everything you need thanks to its excellent performance. You will be sure to have the best solution for your safety and security, hence guaranteeing you peace of mind. Espace alarm systems comply with the EN European standard, applicable to radio alarm systems. They bear the INCERT, NFA2P, IMQ markings in line with national regulations. According to references ( 3 )

4 Operating your Daitem alarm Controlling your alarm All you have to do is punch in your access code on the keypad placed inside or outside your home or simply press on the remote control button. Detecting intruders The detectors are strategically positioned around your home. As soon as an intruder is detected, the alarm control panel is immediately notified and it activates the appropriate deterrent. ( 4 )

5 Centralising information The alarm control panel is the brain behind your system. It manages radio information from the control devices and detectors. If an alarm is triggered, the panel sounds its built-in siren and a series of alerts and deterrents. Your orders are confirmed by voice synthesis, which also warns you of any anomalies or alarms activated in your absence. Deterring intruders and ensuring remote protection If an intruder is detected, the Espace control panel activates the alert and deterrent devices along with a powerful strobe-siren to frighten him away. The telephone transmission feature built into the alarm control panel calls up three people (designated by yourself), or a remote alarm monitoring centre to notify them. ( 5 )

6 The Daitem Espace system stands out for its performance, its range of features and its advanced technology. It is designed to adapt to all your specific needs, with each system being custom-built by a specialist. The Daitem Espace is easy to use day in day out. 8 intrusion protection groups You can switch each individual group of detectors on or off and set up selective activation of the alerts and deterrents for each one. Groups 5 to 8 can only be controlled from the control panel keypad or wired control interfaces. Illustration: management of 4 independent groups. Group 1 operating Group 2 operating Group 3 operating Protecting your homeand your property There is a wide range of detectors available for spotting attempts to break into your home. A qualified intrusion detection triggers the sirens and strobes hence frightening off the intruder. If the control panel has a phone dialler module, it will also telephone three correspondents of your choice or a remote alarm monitoring company. Protecting your loved ones The Stay/Presence ON feature means you can protect your home while you are there. If there is an attempt to break in, the system is discretely activated. If you are attacked or you suddenly fall ill, you can use the remote control or keypad to activate a silent alarm via telephone transmission (if your control panel has a built-in dialler) or a general alarm. Protecting against fire hazards With the smoke detector and temperature-rise detection feature included in all the motion detectors, the system provides you with fire protection 24 hours a day. If a fire outbreak is detected, it will activate the appropriate warning system: local warning, sirens triggered and / or telephone transmission with specific message if the control panel has a dialler module. Protection against certain domestic hazards can also be provided (freezing, flooding, mains power cut, etc.). Group 4 operating Let s imagine you want to protect the ground floor, first floor, office, garage, etc., separately. You can allocate up to 80 different detectors to these groups, each with individual identification and personalised voice synthesis. If an alarm is triggered or an anomaly detected, you can easily and quickly identify which detector or detectors are concerned. 3 intrusion detection levels Peripheral detection: The roller/shutter blind sensors, control remote keypad with proximity detector or external pet-tolerant motion detector detect intruders before they break in. Perimeter doors & windows detection: Using contact detectors on doors or glassbreak detectors on windows you can protect all the entrances to your home. Interior detection: Using motion detectors you can protect different areas in your home, even when there are pets. Progressive deterrence Groups 1, 2, 3 & 4 operating Depending on the level of detection, your system will provide a progressive response: external peripheral detectors can trigger a discrete or full pre-alert, interior perimeter or interior detectors trigger a general alarm. ( 6 )

7 A complete protection system for total security A broad range of control devices Miniature remote controls (with 2 and 4 functions) Can be used to switch your alarm system on or off, from inside or outside your home, by simply pushing on a button. They also control additional features such as personal attack protection. Control remote keypads Can be easily used by the whole family. With different access codes, they offer considerable flexibility for managing occasional users (neighbours, family, caretaker, etc.), as well as the possibility of restricting access rights. Some keypads confirm that the control panel has received orders by lighting indicators or issuing a voice message. In addition, the Espace multi-functional mobile keypad can be used to operate the alarm system, indoor and outdoor electrical appliances and different automatic control systems. Remote control via the telephone Using a dialler module or GSM telephone dialler, you can arm or disarm your system remotely over the phone (access protected by a secret code). Built-in voice synthesis As well as all the control devices designed for maximum user comfort, your system has built-in voice synthesis to provide clear, understandable confirmation of all commands: system ON or OFF, but also messages relating to the events memory (alarms or anomalies) so that you can precisely identify the devices concerned. Efficient telephone transmission The dialler module provides remote warning of a problem. If an alarm is triggered As well as the local deterrents, 3 people (designated by yourself) can be immediately warned by phone (including mobiles), or a remote alarm monitoring centre can be contacted. It is also possible to listen in to what is happening in your home and speak if required. If an anomaly is detected If the system's batteries are low, for example, the system could call your installation contractor so that he can quickly come and replace them. When there is no fixed telephone line In the event of an intrusion or technical alarm, the GSM telephone dialler will send you remote warnings even when there is no landline. An information number Can be used to warn a person of your choice (yourself, for example, on your mobile phone) that something is happening. Cutting-edge installation tools A set of features and tools have been specially designed for your installation contractor to build you a top-quality, secure system and provide you with fast and efficient maintenance. An operating mode specifically dedicated to the installation contractor providing extremely easy access to system configuration and making installation changes risk-free (only when the alarm is not armed). For greater security this mode can only be accessed with your authorisation. What s more, you can use the dedicated test mode to test your system without setting off the sirens. Transload downloading software developed especially for your installation contractor: configuration, maintenance, control, daily events check, specific identification and monitoring of the state of all system devices, and all from a distance. Your installation contractor can only access these features with your authorisation. Special telephone transmission to immediately warn your installation contractor of any system anomalies. ( 7 )

8 The security of your home... benefits from the most advanced technology Some burglars are more determined than others and attempt to disarm the security system so that they can ransack the premises more freely. All the security-check devices of the Espace alarm, which operate 24 hours a day, have been designed to counter such attempts to tamper with the system. The Daitem alarm stands up to tampering Failsafe radio transmission The fact that there are no wires between the main security devices renders the system more sabotage-proof. Furthermore, the different frequencies used by TwinBand are shared between two very distant bands (433 Mhz and 868 Mhz). They cannot therefore be easily jammed at the same time. However, if this were to happen, the attempt to interfere with the radio link would be immediately detected by the system, which would then provide both a local alert and a remote alert over the phone. Anti-tamper systems All the devices in your system are mechanically protected against opening and removal. If anybody attempts to tamper with the system an alarm is immediately triggered. What s more, all the control keypads are protected against systematic attempts to discover the access code. ( 8 )

9 Failsafe dual power supply The total absence of any connection to the 240 V mains power supply overrides any risks relating to a power cut, be this accidental or on purpose. All Espace system devices are totally autonomous. The TwinPower * supply, made up of two separate professional lithium batteries, enables the system to continue to operate even if one battery fails. With this type of power supply the devices have an average battery life of 5 years (in normal conditions of use). *on control panels and sirens Detection of telephone line cuts If the telephone line is intentionally cut, the line s self-monitoring device built into your system can trigger a local notification and can also activate a Daitem autonomous GSM dialler (optional). Ultra failsafe communication protocol The Daitem Espace system has a communication protocol made up of: - a transmission error detection device to prevent false alarms, - millions of possible radio codes to prevent the same code from being used, - an exclusive tamper-proof system to prevent attempts to reproduce radio messages to switch your alarm system on or off. Permanent self-monitoring All the system s devices are identified and supervised (up to 80 detectors, 10 control devices, 10 alert and deterrent devices, 4 control interfaces and 10 control relays or receivers). When an alarm is triggered or an anomaly occurs the device concerned can be easily identified (personalised voice identification for detectors). Because the system is supervised, the status of each system device can be checked in relation to: - the power supply (to know whether the batteries need changing), - the protected entrances (to check whether they have been left open), - the radio links, - the anti-tamper system. ( 9 )

10 From diagnosing your needs... to monitoring your system Your installation contractor s role is primordial. The efficiency of your protection depends on the quality of your installation. When you trust an experienced professional with the installation of your system you can count on tried and tested equipment and services. This guarantees you the reliability you deserve for the protection of your property and loved ones. Advice Your installation technician is the best placed specialist to provide you with advice. After listening to you and visiting the premises to be protected, he will diagnose your needs and recommend the most suitable configuration for your home. From then on, if you wish to change or upgrade your protection system, he will know the most appropriate additions to be made. Top-quality installation Installing your wireless alarm system does not require any major work or wiring. Your interior design will remain perfectly intact when the various system components are put into place. Because there is no wiring, the devices can be positioned where they will operate most efficiently. Efficient, speedy maintenance Your contractor will configure your system and save all the data on a PC. This means that, with your authorisation, he will be able to check your system and detect any anomalies. He can then act quickly in case of a problem by simply picking up the phone, if the system is fitted with an optional telephone transceiver. He may not even have to visit the site to service your system or diagnose and correct a problem, thus your installation technician will be able to provide you with efficient maintenance for your Daitem system. ( 10 )

11 Solid guarantees A reference in the world of security With quality equipment and services, backed up by technological excellence, Daitem is the brand security professionals always refer to. Because of its commitment to the world of security, Daitem plays a major role in national and international security authorities: its senior experts participating on national and international standards committees actively drawing up National and European standards, and Daitem is a member of Gimalarme (group of alarm manufacturers), the U.T.E. (the French electronics commission, 79), and the E.T.S.I. - res 08 (European Telecommunications Standardisation Institute). But also... Thanks to its perfect mastery of totally wire-free equipment and new communication technologies, Daitem designs innovative systems and devices to meet other needs in the home. The Daitem automatic gate control system is fitted with electronic intelligence offering exceptional user comfort.with its mobile doorphone, Daitem has added mobility to remote access control. Compliant with European standards and regulations Espace alarm systems comply with the EN European standard, applicable to radio alarm systems. They bear the INCERT, NFA2P, IMQ markings in line with national regulations. Compliance with regulations Daitem products have CE marking. They meet the requirements of the following European directives: - Low voltage directive 73/23/CEE of 19/07/73. - Electromagnetic compatibility (EMC) directive 89/336/CEE of 03/05/89. - Radio and telecommunication terminal (R&TT) directive 1999/5/EC of 09/03/99. Daitem products also comply with regulations on radio and telephone transmissions and are Telecommunications Regulatory Authority (TRA) approved. 5-year guarantee* Because Daitem complies with the strictest industrial standards and performs 100 % testing on each component, our equipment is guaranteed for 5 years* (except power supply unit). The GSM telephone dialler (ref ) has a special 3-year guarantee. During this period, any device found to be faulty is replaced by an equivalent or new device. * Daitem provides a 2-year spare parts and labour guarantee for its products. This guarantee is extended to 5 years when the guarantee certificate is returned within 10 days of purchase. The conditions relating to product use and guarantee are available on simple request from your retailer. 5-year battery life** Daitem products are powered by professional lithium batteries that can run for over 5 years**. This source of energy has other advantages too: operation guaranteed for a wide temperature range, very low selfdischarge, very high energy, perfectly stable voltage throughout service life. ** In normal conditions of use. APPROVAL DGPT Ministère chargé des Télécommunications Radiocom Privées France Professionnel According to references ( 11 )

12 All our products... and the features they offer All the components making up the Daitem Espace system are totally wire-free, autonomous and modular. The next few pages describe the main devices; your installation contractor will be able to tell you more about all Daitem products. Control panel with siren and keypad Ref sand colour 4 types of protection: intrusion, personal, fire and building hazards Built-in voice synthesis 3 separate intrusion protection groups Supervision and identification of: 20 detectors, 10 remote control devices, 10 alert and deterrent devices, 10 control receiver or radio repeater relays Control keypad and built-in programming (16 access code) Addition of dialler module possible Built-in siren reaching 108 db 1 metre away Local or remote configuration or maintenance (using software or via phone) Anti-tamper system: protection against removal and radio interference Dimensions: 330 x 245 x 68 mm Control panel with siren, dialler and keypad Ref grey/silver colour 4 types of protection: intrusion, personal, fire and building hazards Built-in voice synthesis 8 separate protection groups Supervision and identification of: 80 detectors, 10 control devices, 10 alert and deterrent devices, 10 control receiver or radio relays Built-in transmitter module: - Main call cycle (3 numbers) for transmission of alarms and anomalies to a remote alarm monitoring centre or individual correspondents - Contractor call cycle (3 numbers) for voice transmission of anomalies requiring installation technician action - Additional call cycle for other events - Listen-in and talk-back function following telephone transmission - Remote control function Built-in control and programming keypad (32 access codes) Built-in siren reaching 108 db 1 metre away Local or remote configuration or maintenance (using software or over the phone) Anti-tamper system: protection against removal and radio interference Dimensions: 330 x 245 x 68 mm new Standalone GSM/GPRS dialler Ref Motion detector with images transmission Ref Pet-tolerant version Ref The dialler uses the GSM/GPRS network to provide remote warning of events occurring on the protected site. Combined with a DaitemTwinBand alarm system including image transmission detectors (195-21X or X), the dialler can send: an MMS (4 or 5 images) to the correspondent s mobile phone allowing visual confirmation of an alarm, or a sequence of images to a remote monitoring centre allowing visual confirmation of an alarm (requires subscription contract with a remote monitoring centre equipped with the Viewcom IP protocol). Dimensions: 253 x 195 x 53 mm The motion detector with image transmission monitors rooms such as dining rooms, offices, living rooms, etc. Based on infrared detection Dimensions: 125 x 64 x 85 mm Voice and digital PSTN phone communicator Ref Because it is battery-operated, it does not need to be installed where the control panel is Main call cycle (3 numbers) for transmission of alarms and faults to a remote central station monitoring company or individual correspondents Installer call cycle (3 numbers) for voice transmission of faults requiring action to the installer Additional call cycle for other types of events Listen-in and speak-out/talk-back function following telephone transmission Remote-control function Dimensions: 253 x 195 x 53 mm Dialler module Ref Has the same features as the phone communicator The module s electronic board is installed inside control panel (in which case the control panel must be installed near a telephone line) GSM communicator Ref stand alone Available: Ref mains-powered Ref battery stand alone and/or mains powered Recommended for the protection of sites fitted with a Daitem anti-intrusion alarm Can be used alone or in premises or homes without a landline or as back up to a control panel telephone dialler Powered by battery (no need for mains connection) Transmission of radio messages from the Daitem alarm system Remote control of relay outputs and Daitem alarm system following confirmation call List of 9 call numbers defined by the user Call cycle activated 5 times with possibility of acknowledgement and termination during the cycle Listen-in function and system confirmation call can be individually programmed for each number Call numbers comprising up to 20 digits Transmission of voice and/or SMS messages Transmission of digital messages (Ademco, Contact ID and Daitem protocols) Voice synthesis and messages pre-registered in 6 languages (F,GB,I,E,D,NL) Requires conventional subscription to GSM provider Dimensions: 253 x 195 x 53 mm ( 12 )

13 new alarm pendant Ref. SH601AX Allows emergency messages to be sent 24 hours a day whether the alarm system is armed or disarmed Triggered by simply pulling on the sliding part or by pressing on the button Can be used as a pendant, clipped to a belt or fixed to a wall Entirely waterproof 10-year battery life Dimensions: 37 x 88 x 14 mm Miniature remote controls Ref functions Ref functions 2 or 4 programmable keys: - to switch the alarm system on (partial ON, total ON, stay/presence ON) - to switch the alarm system off (partial OFF, total OFF) - controls groups 1-4 only ( required for groups 5-8) - comfort features (lighting, chime, gate control, etc.) - alert, silent alarm, etc. Light indicator confirming orders and battery status Dimensions: 72 x 38 x 14 mm Remote control keypad Ref sand colour For use inside or outside Use protected by secret access code (5 codes) 6 programmable control keys: - to switch the alarm system on (partial ON, total ON, stay/presence ON) - to switch the alarm system off (partial OFF, total OFF) - controls groups 1-4 only ( required for groups 5-8) - comfort features (lighting, chime, gate control, etc.) - alert, silent alarm, etc. Light indicator confirming system commands and battery status Back-lit keys for the dark Protection against removal Dimensions: 145 x 85 x 35 mm Remote control and information keypad Ref sand colour Same features as keypad ref with the following additional functions: System information indication via light indicators: - 4 intrusion protection group status indicators - 1 alarm indicator - 1 anomaly indicator - 1 entrance open indicator Dimensions: 210 x 85 x 40 mm Voice remote keypad with tag reader and person proximity detector Ref sand colour Same features as the keypad with the following additional functions: Voice confirmation of orders and events 33 access codes (or 24 proximity tags and 9 access codes) Built-in proximity tags reader for up to 24 different tags offering the following possibilities: - tag simply applied, no need to key in access code - authorised orders can be programmed for each tag - use of one or several tags can be authorised or inhibited Built-in person proximity detector (1 to 3 m range) with automatic: - keypad back-lighting - voice message to indicate system ON - activation of a prealert when two detectors are triggered one after the other (if the system is ON) Dimensions: 210 x 85 x 38 mm Multi-functional portable keypad Ref Indoor use Secure use based on access codes and/or proximity tags Alarm system commands: - Arming/Disarming - manual alarm triggering - system status return - indication of entrance points left open - indication of alarms and anomalies - total arming and disarming command programming - presence simulation Lighting and electrical appliance commands Dimensions: 253,2 x 86,2 x 52,6 mm Opening commands (automatic control systems for gates, garage doors and electrical locks) Wide angle volumetric detector Ref Suitable for protecting main rooms such as dining rooms, offices, lounges - 90 wide angle lens; 12 m range - 4 rows of beams, 19 beams including 2 creep zones Dimensions: 95 x 60 x 50 mm Long range corridor motion detector Ref Designed to protect passageways such as corridors, stairwells - 10 long range (corridor) lens; 25 m range - 9 beams including 1 creep zone Dimensions: 95 x 60 x 50 mm Curtain motion detector Ref Designed to protect entrances points at risk such as bay windows or rooms with several access points - 8 curtain lens; 12 m range - 9 beams including 1 creep zone Dimensions: 95 x 60 x 50 mm Pet-tolerant motion detector Ref The AnimalSense detector can tell the difference between a human body and an animal s (weighing up to 12 kg) using a specific lens and appropriate electronic filtering Dimensions: 95 x 60 x 50 mm Dual-technology motion detector Ref Double detection for even greater reliability: - Passive infrared detection technology with temperature compensation - Microwave detection technology (to confirm passive infrared detection) Dimensions: 125 x 75 x 65 mm Common features of motion detectors: Detection: passive infrared with temperature compensation Choice of activation level on detection of movement (discrete prealert, full-blown prealert or intrusion alarm) Built-in temperature sensor (optional) triggering a technical alarm if the temperature drops below 5 C Correct operation test key and indicator Mounting on self-locking pivot, flat surface or in a corner Protection against removal (for mounting without pivot) ( 13 )

14 new Infrared detector-camera with local pictures Ref Ref pet-tolerant version Volumetric monitoring based on failsafe infrared detection Recording of image sequences by built-in camera. Following infrared detection, the detector films and stores a 10-second image sequence on a micro SD card (only use the micro SD card supplied). Time and date stamping of recorded images Consultation of stored image sequences from the card drive of a computer or by using Bluetooth application Freezing temperature detection: a technical alarm is triggered if the temperature drops below 5 C Protection against removal Dimensions : 125 x 64 x 85 mm Multicontact detectors Ref white Ref brown Built-in opening contact to protect entrances Terminal block to protect separate contacts of your choice (glassbreak sensor, roller blind sensor, pressure mat, etc.) Choice of activation level on intruder detection Correct operation test key and indicator Protection against opening and removal Dimensions: 138 x 26 x 30 mm Miniature contact detectors Ref white Ref brown Built-in magnetic contact Front face test button, checks battery & operation Battery self-test Integral magnetic normally closed (NC) contact Protection against opening and removal Dimensions: 108 x 26 x 30 mm Audiosonic breakglass detector Ref Adapted to the protection of multiple paned windows and multiple windows such as bay windows and verandas... and for the majority of types of glass Relaible detection of breaking glass Button and LED indicator function & battery self-test Protection against opening and removal Dimensions: 138 x 40 x 30 mm Technical probes Used in conjunction with the X external universal transmitter, technical probes provide 24-hour monitoring of domestic appliances Dimensions: 53 x 70 x 12 mm SONIN flood probe Protection against water damage Detection triggered when the water level reaches 2 mm Indoor/outdoor SONHG freeze probe Temperature monitoring in unoccupied premises Triggering temperature: + 5 C (+/- 2 C) Reset temperature: + 7 C (+/- 2,5 C) For indoor or outdoor use SONPC freezer breakdown probe Monitoring of temperature inside freezer (in compliance with European standards for electrical appliances) Detection of temperatures above - 12 C (+/- 2 C) For indoor or outdoor use SONCS power cut probe* Monitoring of electrical power supply to domestic and professional appliances For indoor use Power cut detected after 18 minutes or after 5 hours (slide switch selection) * Standard European socket, not suitable for Switzerland or the United Kingdom External motion detectors Dimensions (without swivel bracket): 163 x 85 x 63 mm Ref wide angle For protecting a 10 m x 10 m surface area Volumetric detection 90 ; range: 10 m Ref long range For protecting long and narrow areas (stairwells, external bridges, etc. Long range: 20 m Ref curtain For protecting areas close to vulnerable entrances (bay windows, doors, etc.) Range: 10 m External pet-tolerant motion detector Ref Fitted with two mechanically independent and adjustable passive infrared detectors Triggered when the beams of both sensors are cut at the same time 90 lens 2 detection zones each with 7 beams with 15 spacing Anti-tamper protection against opening Dimensions: 80 x 108 x 198 mm External motion detector 2 x 12 m Ref Designed to monitor the outside area of a protected site providing advance warning of potential break-ins Area covered: 2 x 2 separately adjustable detection beams with a 2 to 12 m range 2 detection beams must be broken simultaneously to trigger an alarm (preventing false alarms due to animal movement) No false alarms triggered by sunlight or car headlights Can be programmed for pre-alarm or alarm Correct operation test indicator and key Anti-tamper protection against opening Dimensions: 56 x 128 x 253 mm new Medium-range external infrared barriers Ref. SH100AX 30 m without radio Ref. SH101AX 60 m without radio Ref. SH102AX 30 m with radio Ref. SH103AX 60 m with radio External perimeter protection Early detection Entirely wireless and self-powered Lithium power pack with 5-year battery life Adaptable medium-distance protection: 30 or 60 metres, with or without radio transmission Protection against opening and removal Dimensions of each module: 88 x x 217 mm ( 14 )

15 Radio smoke detectors Ref white Ref stand alone Optical detection of slow-starting fires giving off thick smoke with visible particles Average coverage: 40 m2 Built-in 93 db buzzer General activation of system with specific sound Correct operation test indicator for sensor Dimensions (diam. x H): 120 x 54 mm Heat detector Ref Detects: - abnormal temperature-rise speed - temperatures above 54 C Average coverage: 30 m² Built-in 85 db buzzer Triggers the protection system s general alarm in specific fire-sounding mode Operating test indicator Dimensions (diam. x H) : 125 x 48 mmm External universal transmitter Ref The external universal transmitter is especially designed to operate outside and in difficult climatic conditions. It acts as an interface: either for detection or control type applications or for applications designed to protect against technical risks when used in conjunction with Daitem technical probes Dimensions with cable gland: 160 x 80 x 35 mm Universal transmitter Ref terminal blocks for connecting any type of external actuator or sensor Built-in normally closed contact to protect entrance points Application examples: - automatic alarm system control at set times (when time clock is connected) - technical protection (when appropriate sensor connected) Correct operation test indicator and key Anti-tamper protection against opening and removal Dimensions: 165 x 36 x 34 mm Hard wired remote control interface Ref sand colour For use inside or outside (in a sheltered place) Remote keypad, hard wired connection Remote Keypad for system programming and control (see control keypad features) Controls groups 1 to 8 17 access codes Listen-in and talk-back feature Voice synthesis Back-lit keys for night operation Protection mechanism preventing opening and removal Dimensions: 210 x 85 x 40 mm Radio receiver for hardwired alarm Ref Can be used to add Espace detectors and control devices to conventional off-the-shelf hardwired alarm systems (up to 32 detectors and 4 control devices to be allocated to 8 zones) Lower cost in relation to wiring (external protection, zones that are difficult to access, extension of distant buildings such as annexes, garages, etc.) LCD information display, built-in antenna Delivered with cable grommets and stuffing boxes Anti-tamper protection against opening and removal Dimensions: 155 x 225 x 60 mm Control and interface receiver Ref For use inside or outside Interface with other transmitters,gsm, long range radio, Red Care etc... Comfort features: control of courtesy lighting, gate or garage door opening/closing (using Daitem or another type of system), etc., via remote control devices and keypads Alarm functions: activation of strobe, etc., when an alarm is triggered Protection against removal Dimensions: 155 x 225 x 60 mm External receivers Ref /230V Ref V/dry contact Ref /24V/dry contact Used to: - remotely switch On/Off electrical devices - control system remotely - activate presence simulation - operate an automatic control system - operate another receiver Can be operated via a multi-functional control remote keypad, wireless keypads & keyfobs or over the phone or by control panel event Totally sealed product Dimensions: 85 x 150 x 25 mm Radio repeater relay Ref Increases radio range between several devices Up to 10 devices per relay and 5 relays maximum per system Protection against removal Dimensions: 247 x 245 x 102 mm Siren Ref Orange strobe-siren Ref Blue strobe-siren Ref Warning for neighbours and deterrence of intruders 3 types of alert tone: - inside intrusion siren or outside siren (adjustable from 20 sec. to 3 min.) - fire siren (lasting 5 min.) For strobe-siren: 1 min. to 5 min. (adjustable strobe) Repeat of Alarm ON and OFF indication selectable Protection against removal Dimensions: 247 x 245 x 102 mm ( 15 )

16 Daitem The European wire-free alarm manufacturer 30 years of experience Daitem, the leading brand name of the Atral group, was founded in 1977 in Crolles near Grenoble (France). The company employs 650 people and has an installed base of half a million security systems. Daitem has always specialised in protecting homes and professional premises. The brand is present in the European market with subsidiaries in France, Germany & Italy but also on the Export market (Luxembourg, Belgium, Switzerland, Spain, United Kingdom & Ireland, Netherlands...). Your installation contractor /F - 03/ Daitem - ATRAL SYSTEM SAS au capital de euros - SIREN RCS Grenoble. Hautefeuille - Photos : Studio Kalice / A. Childéric - Les services et caractéristiques présentés dans ce document sont susceptibles de modifications sans préavis - photos non contractuelles. UK - IRELAND GM Techtronics Ltd Unit 17 Paxcroft Farm HILPERTON TROWBRIDGE WILTS BA14 6JB UNITED KINGDOM Sales: Fax: Technical support: info@gmtechtronics.co.uk OTHER COUNTRIES DAITEM ATRAL SYSTEM S.A.S. International Development Rue du Pré de l Orme CROLLES Cedex FRANCE Tel + 33 (0) Fax +33 (0)