CURRICULUM DEVELOPMENT DIVISION DEPARTMENT OF POLYTECHNIC EDUCATION MINISTRY OF HIGHER EDUCATION DIPLOMA IN ELECTRONIC ENGINEERING (COMPUTER)

Transcription

1 CURRICULUM DEVELOPMENT DIVISION DEPARTMENT OF POLYTECHNIC EDUCATION MINISTRY OF HIGHER EDUCATION DIPLOMA IN ELECTRONIC ENGINEERING (COMPUTER)

2 Endorsement The curriculum for this programme has been prepared in accordance to the curriculum development process set by the Curriculum Development and Evaluation Division, Department of Polytechnic Education, Ministry of Higher Education Malaysia. The programme structure and curriculum have been approved by the Curriculum Board for Study and Training Programmes at the Polytechnics on the 8 th May HAJI MOHD GHAUS BIN AB. KADIR Director Curriculum Development and Evaluation Division Department of Polytechnic Education Ministry of Higher Education 08/05/10 Galeria PjH, Aras 4, Jalan P4B, Persiaran Perdana, Presint 4, Putrajaya Tel: ; Fax: Department of Polytechnic Education RESTRICTED

3 PROGRAMME OVERVIEW INTRODUCTION The is designed to cover the current wide discipline of electronic engineering with the added specialization of electronics used in the field of computer technology. Graduates are forecast to serve in the field of computer technology and electronic engineering. The use of electronics in computer based equipment today requires skilled and trained technicians necessary for these new challenges. The of the Polytechnic s Ministry of Higher Education Malaysia equips its graduates with the certified and recognized technical skills necessary in the area of specialization. An electronic engineering diploma graduate of the Polytechnic s Ministry of Higher Education Malaysia would have undergone a core curriculum consisting of courses in mathematics, fundamentals of electricity, electronics and solid state devices. Graduates of the electronic engineering (computer) diploma programme would have undergone specialized courses in computer architecture and organization microprocessor, database system, operating system, programming and computer system diagnosis and maintenance. The 6 semester approach of The is designed to provide an electronic engineering diploma graduate with the possibility of articulating towards a career in the field of computer engineering or electronics engineering. This multidisciplinary field involves the application of the principles of engineering in solving problems in an electronic and computer based system. With the advent of computer hardware and software integration, more and more participation of technicians is being demanded in the field of computer technology. This has necessitated the birth of electronic technicians, who are able to grasp the essences of computerization with a solid background in the field of electronic engineering. Version : _1.1_Effective:1 December 2011 i RESTRICTED

4 SYNOPSIS The is designed to cover the current wide discipline of electronic engineering, with the added specialization of electronics used in the field of computer based technology. The broad-based electronic foundation of which includes power, telecommunication, control, instrumentation and computers provides versatility to the graduates, while emphasizing the area of specialization. These graduates are forecast to serve in the field of computer technology. The use of electronics in computer based equipment today requires skilled and trained technicians necessary for these new challenges. The Diploma in Electronic Engineering (Computer) of the Polytechnic s Ministry of Higher Education Malaysia equips its graduates with the certified and recognized technical skills necessary in the are of specialization. JOB PROSPECT This programme provides the knowledge and skills in electronic engineering with specialization in computer. The knowledge and skills that the students acquire from the programme will enable them to participate in the job market as:- Computer Technician Electronic Technician Technical Specialist Electrical, Electronic and Computer Service Technician Assistant Engineer Marketing Executive Self-employed Version : _1.1_Effective:1 December 2011 ii RESTRICTED

5 VISION To be Malaysia's number one provider of innovative human capital through transformational education and training for the global workforce by MISSION Breaking boundaries for the creation of transformative and creative learning environment for an innovation led economy. PROGRAMME AIMS The graduates in Polytechnics, Ministry of Higher Education will have the knowledge, technical skills, communication skills and attitude to adapt themselves with new technological advancement and challenges in the computer and electronics field. PROGRAMME EDUCATIONAL OBJECTIVES (PEO) The Diploma in Electronics Engineering (Computer) programme shall produce semi professionals who are: 1. knowledgeable and technically competent in electronics and computer disciplines and able to adapt themselves with new technological challenges in electronic and computer. 2. effective in communication and contribute effectively as a team member with the capability of being a leader. 3. capable to solve computer and electronics problems innovatively, creatively, ethically with social responsibility towards developing country and community. 4. able to demonstrate entreprenuership skills and recognize the need of lifelong learning for successful career advancement. Version : _1.1_Effective:1 December 2011 iii RESTRICTED

6 PROGRAMME LEARNING OUTCOMES (PLO) Upon completion of the programme, graduates should be able to: 1. apply knowledge of mathematics, science and electronic fundamentals to electronic engineering principles. 2. troubleshoot, repair and do maintenance for electrical and electronics equipment with specialization in computer. 3. communicate effectively with the engineering community and the society at large. 4. demonstrate critical thinking in providing effective solution to related computer and electronic engineering problems. 5. demonstrate awareness and consideration for societal, health, safety, legal and cultural issues and the consequent responsibilities, taking into account the need for sustainable development. 6. engage in professional development and independent acquisition of new knowledge and skill; 7. recognise the need for entrepreneurship. 8. demonstrate an understanding of professional ethics, responsibilities and norms of electrical and electronic engineering practices. 9. work independently or as a team member successfully, with a capability to be a leader. Version : _1.1_Effective:1 December 2011 iv RESTRICTED

7 MATRIX OF PROGRAMME EDUCATIONAL OBJECTIVES (PEO) VS PROGRAMME LEARNING OUTCOME (PLO) Programme Educational Objectives (PEO) : The Diploma in Electronics Engineering (Computer) programme shall produce semi professionals who are: PEO knowledgeable and technically competent in electronics and computer disciplines and able to adapt themselves with new technological challenges in electronic and computer. effective in communication and contribute effectively as a team member with the capability of being a leader. capable to solve computer and electronics problems innovatively, creatively, ethically with social responsibility towards developing country and community. able to demonstrate entreprenuership skills and recognize the need of lifelong learning for successful career advancement. PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8 PLO9 LD1 LD2 LD3 LD4 LD5 LD6 LD7 LD8 LD9 Learning Domain LD1 Knowledge LD2 Practical Skills LD3 Communication Skills LD4 Critical Thinking and Problem Solving Skills LD5 Social Skills and Responsibilities LD6 Continuous Learning and Information Management Skills LD7 Management and Entreprenuerial Skills LD8 Professionalism, Ethics and Moral LD9 Leadership and Teamwork Skills Version : _1.1_Effective:1 December 2011 v RESTRICTED

8 Knowledge Practical Skills Communication Skills Critical Thinking and Problem Solving Skills Social Skills and Responsibilities Continuous Learning and Information Management Skills Management and Entrepreneurial Skills Professionalism, Ethics and Moral Leadership and Teamwork Skills RESTRICTED MATRIX OF COURSES VS PROGRAMME LEARNING OUTCOME (PLO) PROGRAMME LEARNING OUTCOME (PLO) PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8 PLO9 NO COURSES COMPULSORY 1. AA101 Islamic Education 1 2. AA102 Moral Education 1 3. AE101 Communicative English 1 4. AR101 Co-Curriculum 1 5. AA201 Islamic Education 2 6. AA202 Moral Education 2 7. AR201 Co-Curriculum 2 8. AE301 Communicative English 2 9. AS101 Soft Skills 10. AE501 Communicative English AA301 Islamic Civilization 12. AT401 Industrial Training COMMON CORE 13. BA101 Engineering Mathematics BB101 Engineering Science 15. BC101 Computer Application Version : _1.1_Effective:1 December 2011 vi RESTRICTED

9 Knowledge Practical Skills Communication Skills Critical Thinking and Problem Solving Skills Social Skills and Responsibilities Continuous Learning and Information Management Skills Management and Entrepreneurial Skills Professionalism, Ethics and Moral Leadership and Teamwork Skills RESTRICTED PROGRAMME LEARNING OUTCOME (PLO) PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8 PLO9 NO COURSES 16. BA201 Engineering Mathematics AW101 Occupational Safety and Health BA301 Engineering Mathematics BA501 Engineering Mathematics BA601 Engineering Mathematics PB201 Entrepreneurship DISCIPLINE CORE 22. ET101 Electrical Technology 23. ET102 Electrical Wiring 24. EE101 Measurement 25. ET201 Electrical Circuits 26. EE201 Semiconductors Devices 28. EE202 Digital Electronics 27. EC201 Fundamental Programming 29. EC202 Computer Aided Design (CAD) 30. EE301 Electronic Circuits 31. EC301 Computer Networking Fundamentals 32. EC302 Electronic Computer Aided Design (ECAD) 33. EP301 Communication System Fundamentals Version : _1.1_Effective:1 December 2011 vii RESTRICTED

10 Knowledge Practical Skills Communication Skills Critical Thinking and Problem Solving Skills Social Skills and Responsibilities Continuous Learning and Information Management Skills Management and Entrepreneurial Skills Professionalism, Ethics and Moral Leadership and Teamwork Skills RESTRICTED PROGRAMME LEARNING OUTCOME (PLO) PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8 PLO9 NO COURSES 34. EC501 Embedded System Applications SPECIALISATION 35. EC303 Computer Architecture and Organization 36. EC304 Microprocessor Fundamental 37. EC502 Visual Basic Programming 38. EC503 Operating Systems 39. EE603 CMOS Integrated Circuit Design 40. EC601 Database System 41. EC602 Computer System Diagnosis and Maintenance 42. EE501 Project EE601 Project 2 ELECTIVE 44. EJ501 Programmable Logic Controller (PLC) & Automation 45. EE503 IC Fabrication and Packaging Technology 46. EC504 Interactive Multimedia Applications 47. EE604 CMOS VLSI Layout Design 48. EC 603 Embedded Robotic TOTAL Version : _1.1_Effective:1 December 2011 viii RESTRICTED

11 Version : _1.1_Effective:1 December 2011 ix RESTRICTED

12 AT401 INDUSTRIAL TRAINING RESTRICTED Diploma In Electronic Engineering (Computer) PROGRAMME STRUCTURE FOR DIPLOMA IN ELECTRONIC ENGINEERING (COMPUTER) COURSE CODE SEMESTER 1 SEMESTER 2 SEMESTER 3 S4 SEMESTER 5 SEMESTER 6 COURSE L1 L2 L3 L4 L5 L6 L P T C L P T C L P T C L P T C L P T C COMPULSORY AA Islamic Education 1 & 2 * AA Moral Education 1 & 2 ** AA 301 Islamic Civilisation AE Communicative English 1, 2 & AR Co-Curiculum 1 & AS 101 Soft Skills AT 401 Industrial Training TOTAL COMMON CORE BA Engineering Mathematics 1, 2, 3, 4 & BB 101 Engineering Science BC 101 Computer Application AW 101 Occupational Safety and Health PB 201 Entrepreneurship TOTAL DISCIPLINE CORE ET 101 Electrical Technology ET 102 Electrical Wiring EE 101 Measurement ET 201 Electrical Circuits EE 201 Semiconductor Devices EE 202 Digital Electronics EC 201 Fundamental Programming EC 202 Computer Aided Design (CAD) EE 301 Electronic Circuits EP 301 Communication System Fundamentals EC 301 Computer Networking Fundamentals EC 302 Electronic Computer Aided Design (ECAD) EC 501 Embedded System Applications TOTAL SPECIALISATION EC 303 Computer Architecture and Organization EC 304 Microprocessor Fundamental EC 502 Visual Basic Programming EC 503 Operating Systems EE 603 CMOS Integrated Circuit Design EC 601 Database System EC 602 Computer System Diagnosis and Maintenance EE Project 1 & TOTAL ELECTIVE EJ 501 Programmable Logic Controller (PLC) & Automation EE 503 IC Fabrication and Packaging Technology EC 504 Interactive Multimedia Applications EE 604 CMOS VLSI Layout Design EC 603 Embedded Robotic *** Or any other Level 5 and Level 6 electrical and electronic courses not listed above that can be offered by the respective polytechnic TOTAL GRAND TOTAL CONTACT HOURS/CREDIT TOTAL CREDIT 91 Legend / Notes: L1 - L6 : Level 1 - Level 6 L : Lecture, P : Practical/Lab T : Tutorial, C : Credit Total Lecture 63 Total Practical (Practical + Tutorial) 81 Total Contact Hours 144 Lecture Percentage 44 % Practical Percentage 56 % Students are required to take a minimum of four credits of elective courses. * For Muslim Students ** For Non Muslim Students Version : _1.3_Effective:1December2011 RESTRICTED