Application Note Media Player to FTP Server Sync Setup

Transcription

1 Application Note Media Player to FTP Server Sync Setup Version 1.0

2 Table of Contents 1 Introduction Preparation Use FTP Server Website Server PC or Server Existing FTP Server Media Player Setup DVSYNC.INI file NETCFG.INI file OSD Message Server Content Server File Extensions Reboot file FileZilla FTP Server Setup and Install FTP Server Settings Create FTP server folders Windows firewall setting FileZilla setting Digital View Ltd 2010 Page 2 of 26

3 1 Introduction A quick, easy and very low cost way to remotely manage content such as video, playlists, schedules and data-logs on a digital signage media player with an FTP server. DV-Sync is a Digital View media player based application protocol for scheduled file synchronization with an FTP server. It is designed to enable single or multiple ViewStream 320, ViewStream 520 or ViewStream 700 media players to synchronize and update media and command files such as: Videos and still images Playlists Schedules Updated.ini type command files (e.g. NETCFG.INI, DVSYNC.INI) Datalogs This Application Note shows how to set up a Digital View media player and an FTP server. 1.1 Preparation To enable media player to FTP server file synchronization, you will require: At least one ViewStream 320 (VS-320), ViewStream 520 (VS-520) or ViewStream 700 (VS-700) and related a DVSYNC.INI files, see the setup section below. FTP server with LAN or Internet access, see Section Use When the FTP connection has been established and the ability to synchronize verified it is simply a matter of putting new video content in the FTP folders. (e.g. /MEDIA/*.mpg) Groups: To creates groups of managed media players simply create a content folder for each group and have the relevant players synchronize with the group. Digital View Ltd 2010 Page 3 of 26

4 2 FTP Server An FTP server may be available as follows: Website server PC or Server with Internet access or on LAN Existing FTP server The following sections provide more details on FTP servers. 2.1 Website Server Website servers are typically enabled with FTP access. It is usually relatively straightforward to create a folder and implement a password access restriction for many website servers this can be done through the site management console. Alternatively many FTP clients allow creation of folders and the setting of access right using passwords. Some well known FTP clients include: FileZilla (Mac & PC) SmartFTP (PC) Web browsers: Most recent versions of web browsers can be used as FTP clients but lack the management tools for creating folders and access rights. To allocate players to separate groups it is simply a case of creating additional folders. 2.2 PC or Server A PC or server can be setup as a suitable FTP server to work with a Digital View media player and DV-Sync. Section 5 shows an example setup of an FTP server using the freeware FileZilla program. 2.3 Existing FTP Server Very similar to the technique for working with a web based server the main issue to handle is any firewall. This may require a system administrator to modify settings. Digital View Ltd 2010 Page 4 of 26

5 3 Media Player Setup 3.1 DVSYNC.INI file The DVSYNC.INI file on the Digital View VS-320, VS-520 and VS-700 series media players defines the location of files on the FTP server. DVSYNC.INI must be placed in the media folder on the VS/320/VS-520/ VS-700. Ensure both settings on FTP server and the DVSYNC.ini are identical. The settings include Server IP, Content path, Data log path, Username, Password and the port number. You can use DV Studio to create DVSYNC.INI. It can be uploaded using USB update (refer to the USB Update Application note). DVSYNC.INI Digital View Ltd 2010 Page 5 of 26

6 The DVSYNC.INI files details are: File Content ( DVSYNC.INI ) DVSYNC_INTERVAL_TIME_IN_MINUTE=1 INCLUDE_FILE EXCLUDE_FILE DVSYNC_CONTENT_SERVER_IP= DVSYNC_CONTENT_SERVER_PATH=/media/ DVSYNC_CONTENT_SERVER_USERNAME=DVSYNC DVSYNC_CONTENT_PWD= DVSYNC_CONTENT_PORT_NO=1818 DVSYNC_DATALOG_INTERVAL_TIME_IN_MINUTE=1 DVSYNC_DATALOG_SERVER_IP= DVSYNC_DATALOG_SERVER_PATH=/datalog/ DVSYNC_DATALOG_SERVER_USERNAME=DVSYNC DVSYNC_DATALOG_PWD= DVSYNC_DATALOG_PORT_NO=1818 Description Server synchronization interval File extension(s) types to be specifically included File extension(s) types to be excluded FTP Content Server IP address or Domain Name FTP Server Content path FTP Server access user name FTP Server access password FTP Server access login port Upload data log to server in minutes FTP Data log Server IP address or Domain Name FTP Server Data log path FTP Server access data log user name FTP Server access data log password FTP Server access Data log login port Digital View Ltd 2010 Page 6 of 26

7 3.2 NETCFG.INI file The netcfg.ini file defines the system configuration of the VS-520/VS-700. The file is located under MEDIA folder on the CF card for the system configuration during power up. If this file is not present on the card, the default NVRAM stored values will be used. The NETCFG.INI file can be uploaded using USB update (refer to the USB Update Application note). The DVSYNC.INI files details are: File Content ( NETCFG.INI ) Description Enable message output on RS-232 port IO_OUTPUT_MESSAGE_THROUGH_232_ENABLE 0 = Disable message output 1 = Enable message output [Default] Change IP settings on player IP_OVERWRITE IP NETMASK GATEWAY DNS1 DNS2 0 = Keep the old IP settings on player [Default] 1 = Overwrite with new IP settings on player IP address = DHCP mode [Default: ] Subnet mask (Ignore if set to DHCP) [Default: ] Gateway value (Ignore if set to DHCP) [Default: ] DNS table [ Default: ] TIME_ZONE GMT time zone setting Format: +/- hh [Default: 0] Display filename on screen while downloading DVSYNC_SHOW_DOWNLOAD_FILENAME 0 = Do not show filename while content updating 1 = Show filename while content updating [Default] Enable USB update USB_UPDATE_ENABLE TIME_SERVER 0 Disable 1 Enable USB update [Default] Set time server address Digital View Ltd 2010 Page 7 of 26

8 pool.ntp.org [Default] DATALOG_DURATION_IN_DAY CLEANUP_INTERVAL_IN_MINUTE Max. day(s) to keep data log [Default: 31] Interval to clean up data log [Default: 1440] Stop playing End of Day DAILY_END_TIME_ENABLE USB_POLLING_TIME_FOR_MOUNT_IN_SECON 0 = disable 1 = enable [Default] The polling time to check USB device [Default: 30] Open Telnet port TELNET_ENABLE VOLUME 0 = disable [Default] 1 = enable Master volume set, Range (0-32) [Default: 16] This is a READ ONLY value in netcfg.ini. The mode value is reported by player. X_SCREEN_MODE 1 (1280x720p60 VGA) 12 (1920x1080i60 VGA) 2 (1280x768p60 VGA) 113 (NTSC S-Video) 3 (1280x1024p60 VGA) 114 (PAL S-Video) 4 (1920x1080p60 VGA) 201 (1280x720p60 YUV) 5 (1024x768p60 VGA) 212 (1920x1080i60 YUV) 6 (800x600p60 VGA) 213 (NTSC YUV) 7 (640x480p60 VGA) 214 (PAL YUV) 8 (1920x1200p60 VGA) 401 (1280x720p60 HDMI) 9 (1600x900p60 VGA) 404 (1920x1080p60 HDMI) 10 (1600x900p60 VGA) 405 (1024x768p60 HDMI) 11 (1600x1200p60 VGA) 411 (1600x1200p60 HDMI) Function of Track to Track Gap removal TRACKTOTRACK_ENABLE 0 Disable [Default] 1 Enable Auto reboot by daily DAILY_REBOOT_ENABLE DAILY_REBOOT_TIME 0 Disable 1 Enable [Default] Auto reboot schedule [Default: ] Mid-night 03:00:00 Datalog enable DATALOG_ENABLE 0 Disable 1 Enable [Default] Digital View Ltd 2010 Page 8 of 26

9 A basic NETCFG.INI can be downloaded to amend from the Media Tools section on the Digital View website - Some examples: If you are using DHCP, netcfg.ini should look like this (i.e. IP set to ) IP= NETMASK= GATEWAY= DNS1= DNS2= TIME_ZONE=8 DVSYNC_SHOW_DOWNLOAD_FILENAME=1 If you are using a static IP then the file should instead have IP, Netmask and Gateway value assigned from your LAN administrator. See this example: IP= NETMASK= GATEWAY= DNS1= DNS2= TIME_ZONE=8 DVSYNC_SHOW_DOWNLOAD_FILENAME=1 Digital View Ltd 2010 Page 9 of 26

10 3.3 OSD Message The media player OSD screen can be set to show the filename that is being downloaded, see below for the settings to enable/disable this. Add a command SHOW_DOWNLOAD_FILENAME=1 in the NETCFG.INI file, and upload it to the VS-520/VS-700. Set the value to 1 to enable this OSD function. Set the value to 0 to disable this OSD function. Digital View Ltd 2010 Page 10 of 26

11 4 Server Content 4.1 Server File Extensions Files in the server must have their file extension visible, they must not hide the file extension (e.g. ABC.MPG). If file extensions are not visible follow the following steps to unhide them: 1. Open My Computer -> Tools -> Folder Options. 2. Select View page and uncheck the Hide extensions for known file types, then click OK to finish. Digital View Ltd 2010 Page 11 of 26

12 4.2 Reboot file 1. Transfer new content to the target FTP folder for media player synchronization. 2. After the transfer is complete, create a reboot file on the FTP server content path. The reboot file is an empty text file with its file extension removed. If there is an existing reboot file then remove it and then create a new file. 3. Any VS-320, VS-520 or VS-700 media players correctly setup for this FTP location will synchronize the content automatically. 4. The FileZilla server can display the status when an VS-320, VS-520 or VS-700 media player connects and download content. Digital View Ltd 2010 Page 12 of 26

13 Digital View Ltd 2010 Page 13 of 26

14 5 FileZilla FTP Server FileZilla is a freeware FTP server application for Windows; it can be downloaded from the following link: Setup and Install 1. Double click the installation file. 2. Click Run to start installing the software. 3. Click I Agree to accept the terms of the agreement. Digital View Ltd 2010 Page 14 of 26

15 4. Select Standard as the type of install and click next. 5. Choose the install location and click Next. Digital View Ltd 2010 Page 15 of 26

16 6. Choose the action when windows is started, and set the port as 14147, then click Next. 7. Choose the action when server interface is started and click Install. Digital View Ltd 2010 Page 16 of 26

17 8. After the setting, it will start to install the software. 9. When completed, click Close to finish the installation. Digital View Ltd 2010 Page 17 of 26

18 6 FTP Server Settings 6.1 Create FTP server folders 1. Create FTP server folder 2. Create a media folder inside server folder 3. Create a data log folder inside server folder 6.2 Windows firewall setting 1. Click Start and then click Control Panel. Choose Windows Firewall Digital View Ltd 2010 Page 18 of 26

19 2. Select Exceptions page and click Add Port. 3. Give a name of the port and add the ports number as 1818 in TCP mode then click OK. Digital View Ltd 2010 Page 19 of 26

20 4. Repeat the step 2 & 3 to add the port number After add the port, you will see the services in the table, then click OK to finish the firewall setting. Digital View Ltd 2010 Page 20 of 26

21 6.3 FileZilla setting 1. Run Configure FTP server Interface (C:\Program Files\FileZilla Server\FileZilla Server Interface.exe ) 2. Set the configuration : Select Edit -> Settings Change FTP Server Port to 1818 in General settings page. Digital View Ltd 2010 Page 21 of 26

22 Set the Use custom port range as in Passive mode setting page, then click OK. 3. Set the User account: Select Edit -> Users. Click Add to add new user account and set the user name in General page. Digital View Ltd 2010 Page 22 of 26

23 Highlight the new user, enable the account and the password, and then set the password. 4. Map local drive folder to FTP server: Select the Shared folders page, and highlight the new user. Click Add to add the shared folder. Select C:\FTP as home directory. Digital View Ltd 2010 Page 23 of 26

24 Repeat the step 4.1 & 4.2 to add the media and datalog to be shared folders (folder created in section 3.1). 5. Check the comments of the shared folders. Highlight C:\FTP\media to set the server permission. Files: - Read(checked) - Write(not checked) - Delete(not checked) - Append(not checked) Directories: - Create(not checked) - Delete(not checked) - List(checked) - + Subdirs(checked) Digital View Ltd 2010 Page 24 of 26

25 Highlight C:\FTP\datalog to set the server permission. Files: - Read(checked) - Write(checked) - Delete(checked) - Append(checked) Directories: - Create(not checked) - Delete(not checked) - List(checked) - + Subdirs(checked) 6. Click OK to finish the server setting. Digital View Ltd 2010 Page 25 of 26

26 CONTACT DETAILS USA: Digital View Inc Technology Drive Building 130 Morgan Hill, CA Tel: (1) Fax: (1) Sales: EUROPE: Digital View Ltd 6 Marylebone Passage London W1W 8EX UK Tel: (44) (0) Fax: (44) (0) Sales: uksales@digitalview.com ASIA: Digital View Ltd 16 th floor, Millennium City Kwun Tong Road Kwun Tong Hong Kong Tel: (852) Fax: (852) Sales: hksales@digitalview.com Specifications subject to change without notice Application Note Media Player to FTP Server Sync Setup (October 2010) Digital View Ltd 2010 Digital View Ltd 2010 Page 26 of 26