D e s i g n & P r o d u c t i o n I m p l a n t s & P r o s t h e t i c E l e m e n t s

Transcription

1 D e s i g n & P r o d u c t i o n I m p l a n t s & P r o s t h e t i c E l e m e n t s MULTI SYSTEM PRODUCT CATALOGUE 11th Edition

2 HI-TEC IMPLANTS LTD. meets and exceeds the highest standards in the field of the medical devices: the main approvals, besides many others, are: FDA APPROVAL - Center for Devices and Radiological Health in the US FDA (Food and Drug Administration) since CE MARK - After demonstrating compliance with Annex II of Medical Devices Directive 93/42/EEC, entitles us to use CE Marketing on our products. ISO 13485: an international standard for quality management of Medical Devices. Hi-Tec Implants Ltd. meets the requirements of compliance of the Quality System to the requirements of ISO 13485: 2003 for the Design, Manufacture and Inspection of Dental Implants and Accessories. ISO 9001: Certifies that Hi-Tec Implants Ltd. demonstrates compliance of our Quality System to meet the requirements os ISO 9001: 2000 (an international standard for quality managment system). Health Canada Medical Device License and CMDCAS IS :2003 Accredited since 2005

3 TA B L E O F C O N T E N T S HI TEC IMPLANTS Corporate Profile 2 TAPERED SELF THREAD Internal Hex Thread Implants 3 LOGIC PLUS Tapered Thread Implants 6 SELF THREAD 3.30, 3.75 and LOGIC PLUS Prosthetic Elements SELF THREAD 4.20 & 5.00 Prosthetic Elements LOGIC Tapered Thread Implants LOGIC Prosthetic Elements VISION Tapered Thread Implants VISION Prosthetic Elements SUMMIT External Hex Thread Implants VISION Prosthetic Elements TITE - FIT Internal Octgon & Morse Taper Implants TAPERED TITE - FIT Internal Octgon & Morse Taper Implants TITE - FIT & TAPERED TITE - FIT Prosthetic Elements TRX Trans Gingival Implants TRX-TP Trans Gingival Implants TRX-BA Ball Attachment Implants TRX-OP One Piece Implants TRI and TRI-N Mini Implants TRI-OR Orthodontic Implants DEPTH CONTROL SYSTEM BONE TRAP and TORQUE WRENCH Color Coding ø 3.30 mm ø 3.75 mm ø 4.20 mm ø 5.00 mm 1

4 I N T R O D U C T I O N H I -T E C I M P L A N T S - A d v a n ce d N e w Te ch n o l o g y Innovative dental implants and prosthetic elements for over 20 years Corporate Profile Hi-Tec Implants developes, manufactures and markets an extensive range of dental implants and prosthetic elements since Hi-Tec Implants was founded by dental professionals with rich clinical experience, and it s commitment is to develop products that offer longterm compatibility with implant dentistry. The goal is to continue to provide the most technologically advanced products, to help dentists develop their practice and to provide their patients with the most upto date treatment. Hi-Tec Implants houses an advanced production facility with state-of-the-art machinery allowing for the utmost accuracy, fast turnaround time, and fulfillment of all customer s needs. The headquarters are located in the Herzlia Industrial Area, Israel. Quality Assurance The medical use of our products demands that ultimate care is taken in assuring quality control throughout all our operations. Over the years, Hi-Tec Implants commitment to quality products and service has met and exceeded the highest standards set by the FDA and many other regulatory agencies. Hi-Tec Implants have received ISO 9001 and CE Certifications representing compliance with the International Standards Organization and European Medical Device Directives. Research and Clinical Experience 20 years of research and rich clinical experience in many countries around the world enable Hi-Tec Implants to develop products that offer long-term satisfaction. Moreover, due to the deep understanding of implant dentistry, clinical studies demonstrate an extremely high rate of Osseo-Integration and functional stability. U S A FOOD & DRUG ADMINISTRATION Product Diversity Hi-Tec Implants offers an extensive range of dental implants, prosthetic elements and surgical tools. Along with this wide range of products, Hi-Tec Implants provides all necessary backup support, focuses on excellent client service and comprehensive training programs. Knowledgeable and friendly sales personnel and technical experts can answer all questions. Client Service and Technical Support Hi-Tec Implants takes pride in the extensive knowledge and training of its staff. Our dedicated Client Service personnel have years of experience in the dental field and use this expertise to assist dental professionals using Hi-Tec products to provide their patients with the ultimate in dental care. 2

5 TA P E R E D S E L F T H R E A D I n t e r n a l H e x T h re a d I m p l a n t s 3.30 m m Ta p e r e d Ti t a n i u m T h r e a d I m p l a n t S e l f T h r e a d mm 16 mm Integrated Surface NTI 8-SR NTI 10-SR NTI 11.5-SR NTI 13-SR NTI 16-SR ø 3.30 mm Titanium Self Tapping Implants Including Titanium Cover Screw 3.75 m m Ta p e r e d Ti t a n i u m T h r e a d I m p l a n t S e l f T h r e a d mm 16 mm Integrated Surface SLT 8-SR SLT 10-SR SLT 11.5-SR SLT 13-SR SLT 16-SR ø 3.75 mm Titanium Self Tapping Implants Including Titanium Cover Screw 4.20 m m Ta p e r e d Ti t a n i u m T h r e a d I m p l a n t S e l f T h r e a d mm 16 mm Integrated Surface GTI 8-SR GTI 10-SR GTI 11.5-SR GTI 13-SR GTI 16-SR ø 4.20 mm Titanium Self Tapping Implants Including Titanium Cover Screw 5.00 m m Ta p e r e d Ti t a n i u m T h r e a d I m p l a n t S e l f T h r e a d mm 16 mm Integrated Surface WTI 8-SR WTI 10-SR WTI 11.5-SR WTI 13-SR WTI 16-SR ø 5.00 mm Titanium Self Tapping Implants Including Titanium Cover Screw - Integrated Surface - Large Grit Sand Blasted & Acid Etched

6 TA P E R E D S E L F T H R E A D S u r g i c a l D r i l l s Ta p e r e d S e l f T h r e a d I n t e r n a l I r r i g at i o n D r i l l S e q u e n ce NTI 3.30 SLT 3.75 GTI 4.20 WTI 5.00 RB ø 2 mm PD ø 2.50 mm FSD ø 2.80 mm NTD ø 3.20 mm STD ø 3.65 mm GTD CSD ø 4.30 mm WTD P l a ce m e n t o f S e l f T h r e a d I m p l a n t s After exposure of the bone penetrate the bone to the depth of using a PD 2 mm internal irrigation drill. X-rays can be taken with paralleling tool placed in preparation to evaluate length and direction. Use FSD 2.50 mm internal irrigation drill to achieve required depth. Use NTD 2.80 mm internal irrigation drill to complete the preparation for the SELF THREAD 3.30 implant. - In case of dense bone, the preparation should be enlarged with a STD 3.20 mm internal irrigation drill to the depth of 5 mm. The STD 3.20 mm internal irrigation drill completes the preparation of the SELF THREAD 3.75 implant. In case of dense bone, use Bone Tap S-BT for final preparation for SELF THREAD 3.75 implant. 6. The GTD 3.65 mm internal irrigation drill completes the preparation for the SELF THREAD 4.20 mm implant. In case of dense bone, use Bone Tap G-BT for final preparation and the CSD internal irrigation drill for cervical preparation for SELF THREAD 4.20 implant. 7. The WTD 4.30 mm internal irrigation drill completes preparation for SELF THREAD 5.00 mm implant. In case of dense bone, use Bone Tap W-BT for final preparation for SELF THREAD 5.00 implant. 8. Hold the Implant mount and thread the implant into the preparation site, continue using a Rachet or Hex Screw Driver (HR, HSD) with adaptor (RAD) or insertion tool (LIT-S, LIT-M). 9. Undo the connecting screw using a 1.25 mm Hex Tool (SHT) and remove mount. If necessary use Long Insertion Tool (LIT-L) to continue screwing the implant. 10. Connect the cover screw or healing cap using the 1.25 Hex Tool (SHT).

7 TA P E R E D S E L F T H R E A D S u r g i c a l K i t S U R GI CA L I N S T R U M E N TAT I O N HR - Hex Ratchet LIT-L - Long Insertion Tool HR S - Square Ratchet LIT-M - Medium Insertion Tool HSD - Hex Screw Driver LIT-S - Short Insertion Tool RAD - Hex to Square Adaptor SHT Hex Tool DL - Drill Extension SHT-L Long Hex Tool PT - Paralleling Tool HR-TW - Torque Wrench Ncm O P T I O N A L CO M P O N E N T S N-BT ll - Bone Tap for 3.30 W-BT II - Bone Tap for 5.00 S-BT ll - Bone Tap for 3.75 LIT-C - Insertion Tool for Contra Angle G-BT ll - Bone Tap for 4.20 SHT-C Hex Tool for Contra Angle H E A L I N G CA P S HC- - 3 mm Healing Cap for 3.30 & 3.75 Implants HC- - 5 mm Healing Cap for 3.30 & 3.75 Implants W-HC-3-3 mm Healing Cap for 4.20 & 5.00 Implants W-HC-5-5 mm Healing Cap for 4.20 & 5.00 Implants HC-3-P - 3 mm Anatomic Healing Cap for 3.30 & 3.75 HC-5-P - 5 mm Anatomic Healing Cap for 3.30 & 3.75 W-HC-3-P - 3 mm Anatomic Healing Cap for 4.20 & 5.00 W-HC-5-P - 5mm Anatomic Healing Cap for 4.20 & 5.00

8 L O GI C P L U S Ta p e re d T h re a d I m p l a n t s 3.5 m m T i t a n i u m T h r e a d I m p l a n t s L GI P L U S mm 16 mm LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS Pre-Mounted ø 3.50 Titanium Integrated Surface Self Tapping Implant & Cover Screw 4.3 m m T i t a n i u m T h r e a d I m p l a n t s L GI P L U S mm 11.5 mm 16 mm LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS Pre-Mounted ø 4.30 Titanium Integrated Surface Self Tapping Implant & Cover Screw 5.0 m m T i t a n i u m T h r e a d I m p l a n t s L GI P L U S mm 11.5 mm 16 mm LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS Pre-Mounted ø 5.0 Titanium Integrated Surface Self Tapping Implant & Cover Screw 6.0 m m T i t a n i u m T h r e a d I m p l a n t s L GI P L U S mm 11.5 mm LGI PLUS LGI PLUS LGI PLUS LGI PLUS LGI PLUS Pre-Mounted ø 6.0 Titanium Integrated Surface Self Tapping Implant & Cover Screw X6 - Unique Thread and Collar Design Integrated Surface - Large Grit Sand Blasted & Acid Etched

9 L O GI C P L U S S u r g i c a l D r i l l s L O GI C P L U S D R I L L S E Q U E N CE Soft Bone Hard Bone LGI PLUS 3.50 LGI PLUS 4.30 LGI PLUS 5.00 LGI PLUS 6.00 ø 2 mm ø 2.50 mm ø 2.80 mm ø 3.20 mm ø 3.50 mm ø 3.65 mm ø 4.30 mm ø 5.20 mm RB PD FSD NTD STD CSD GTD WTD RTD P l a ce m e n t o f L O GI C P L U S I m p l a n t s 1. After exposure of the bone penetrate the bone to the depth of using a PD 2mm internal irrigated drill. In case of dense bone, use the WTD 4.30 mm internal irrigation drill to complete preparation X-rays can be taken with paralleling tool placed in preparation to evaluate length and direction. Use FSD 2.50mm internal irrigation drill to achieve required depth. NTD 2.80 mm internal irrigation drill completes the preparation for the LOGIC PLUS 3.50 implant in soft bone. In case of dense bone, the preparation should be enlarged with a STD 3.20 mm internal irrigation drill and CSD internal irrigation drill for cervical preparation. STD 3.20 mm internal irrigation drill completes the preparation for the LOGIC PLUS 4.3 Implant in soft bone. In case of dense bone, use the GTD 3.65 mm internal irrigation drill to complete the preparation. 7. GTD 3.65 mm internal irrigation drill completes the preparation for the LOGIC PLUS 5.00 implant in soft bone. In case of dense bone, use the WTD 4.30 mm internal irrigation drill to complete preparation. 8. Use RTD 5.20 mm internal irrigation drill for the preparation of the LOGIC PLUS 6.00 implant. 9. Hold the implant mount and thread the implant into the preparation site, continue using a Ratchet or Hex Screw Driver (HR, HSD) with adaptor (RAD) or insertion tool (LIT-S, LIT-M), or LIT-C for contra angle. 10. Undo the connection screw using a 1.25 mm Hex Tool (SHT) and remove mount. If necessary use long insertion Tool (LIT-L) to continue screwing the implant. 6. GTD 3.65 mm internal irrigation drill completes the preparation for the LOGIC PLUS 5.00 implant in soft bone. 11. Connect the cover screw or healing cap using the 1.25 Hex Tool (SHT).

10 L O GI C P L U S HR - Hex Ratchet HR-TW - Torque Wrench Ncm HSD - Hex Screw Driver RAD - Hex to Square Adaptor DL - Drill Extension PT - Paralleling Tool LIT-S - Short Insertion Tool for Mount LIT-M - Medium Insertion Tool LIT-L - Long Insertion Tool LIT-C - Insertion Tool for Contra Angle SHT Hex Tool SHT-L Long Hex Tool SHT-C Hex Tool for Contra Angle H E A L I N G CA P S HC 3-3 mm Healing Cap for LOGIC PLUS HC - 5 mm Healing Cap for LOGIC PLUS HC- -P - 3 mm Anatomic Healing LOGIC PLUS HC- -P - 5 mm Anatomic Healing LOGIC PLUS

11 SELF THREAD 3.30, 3.75 & LOGIC PLUS P r o s t h e t i c E l e m e n t s Cat No Material Application Over Denture Ball Attachment BBA 0.5 BBA 2 BBA 4 BBA mm 2 mm 4 mm 6 mm Surgical Titanium Alloy Over Denture Ball Attachment Nylon Cap NC NC-P NC-2.3 NC-2.2 Nylon Nylon Nylon Nylon 2.5 Standard 2.5 Pink - Soft 2.3 Orange 2.2 Green Metal Housing MH Stainless steel For NC Over-Denture Base OBA 3 OBA 5 3 mm 5 mm Surgical Titanium Alloy Over-Denture Bar Attachment, Fixed Detachable Bridge Bridge Base CBA 0.7 CBA 2 CBA 3 CBA mm 2 mm 3 mm 4 mm Surgical Titanium Alloy Fixed Detachable Bridge Screw-in Anti-Rotation Narrow Anti-Rotation SCA Surgical Fixed Detachable Titanium Alloy Bridge ACA Surgical Fixed Cemented Titanium Alloy Crown & Bridge ACA-S 9 mm Surgical Fixed Cemented Titanium Alloy Bridge & Crown Wide Anti-Rotation Full Anti-Rotation ACA-P Surgical Anatomic for Titanium Alloy Esthetic Crown Restoration ACA-R 12 mm Surgical Anatomic for Titanium Alloy Esthetic Crown Restoration Esthetic ACA-E 1 ACA-E 2 ACA-E 3 ACA-E 4 7 mm 9 mm Surgical Titanium Alloy Fix Cemented Crown & Fixed Cemented Bridge Gold Castable PGA 12 mm Gold Base & Plastic Sleeve Castable for One Piece Retrievable Crown or Cemented Crown Plastic / Titanium Castable Anti-Rotation PTA 12 mm Surgical Titanium Alloy & Plastic Sleeve Castable for One Piece Retrievable Crown or Cemented Crown Plastic Castable Anti- Rotation PCA Plastic Titanium Screw Castable for One Piece Retrievable Crown or Cemented Crown Peek Temporary RPA RPA 15 RPA 25 Plastic Titanium Screw Temporary Restoration

12 SELF THREAD 3.30, 3.75 & LOGIC PLUS P r o s t h e t i c E l e m e n t s Cat No Material Application 15 Angulated 25 Angulated ANA 15 ANA 25 Surgical Titanium Alloy Fixed Cemented Crown & Fixed Cemented Bridge Shouldered 15 ANA 15 - E mm Surgical Angulated ANA 15 - E mm Titanium Alloy Fixed Cemented Crown & Fixed Cemented Bridge Zirconium / Titanium Anti-Rotation Zirconium / Titanium Anti-Rotation ZTA ZTA-B 12 mm 12 mm Zirconium with Titanium base & Titanium Screw One Piece Retrievable Crown for Cemented Crown & Bridge M o d u l a r S h o u l d e r e d A b u t m e n t S y s t e m Modular Shouldered ACA-G-1 ACA-G-2 ACA-G-3 ACA-G-4 1 mm 2 mm 3 mm 4 mm Surgical Titanium Alloy Fixed Cemented Bridge & Crown Impression Transfer G-PT Plastic Closed Tray Impression Comfort Cap G-HC Plastic For ACA-G Castable Sleeve GC-R Plastic For Wax Up Anti-Rotation Castable Sleeve GC-F Plastic For Wax Up Analog GL Stainless Steel Analog U n i v e r s a l U n i t S y s t e m Straight S-MU-1 S-MU-2 S-MU-3 S-MU-4 1 mm 2 mm 3 mm 4 mm Surgical Titanium Alloy Fixed Detachable Bridge 17º 30º S-MU-17 S-MU mm 1.3 mm Surgical Titanium Alloy Fixed Detachable Bridge MU-Comfort Cap MU-HC 2.5 mm Plastic with Titanium Screw Includes MU-S screw MU-Castable Sleeve MU-PC 12 mm Plastic For Wax Up MU-Titanium Sleeve MU-TPC 12 mm Plastic For Provisional Bridge MU-Fixation Screw MU-FS 2.5 mm Surgical Titanium Alloy Fixation Screw MU-Closed Impression Transfer MU-Opened Impression Transfer MU-AAT Stainless Steel Closed Tray Impression MU-AAT-L Stainless Steel Opened Tray Impression MU-Analog MU-CL Stainless Steel Analog MU-Tool-Hex MU-IT Stainless Steel For Hex Ratchet MU-Tool-Square MU-IT-Q Stainless Steel For Square Ratchet

13 I M P R E S S I O N T R A N S F E R S SELF THREAD 3.30, 3.75 & LOGIC PLUS P r o s t h e t i c E l e m e n t s SAT - Impression Transfer for Screw-In Closed Tray AAT - Impression Transfer for Hex Lock Closed Tray AAT-L - Impression Transfer for Hex Lock Open Tray AST - Impression Transfer for Closed Tray with SNAP CAP T-PT - Impression SNAP CAP for AST TS - Transfer for Detachable Bridge on OBA & CBA A N A L O GS IL - Implant Analog BL - Analog for OBA CL - Conical Analog for CBA BNL - Ball Attachment Analog for BBA CA S TA B L E P L A S T I C S L E E V E S, T I TA N I U M S L E E V E S & F I X AT I O N S CR E W S PC 8 & 12 - Plastic Cylinder 8 & 12 mm for OBA PC-T - Titanium Cylinder for OBA CPC - Conical Plastic Cylinder for CBA CPC-T - Titanium Cylinder for CBA FS 3, 8 & 12 - Fixation Screw 3, 8 & 12 mm for Detachable Bridge P R O S T H E T I C T O O L S Cat No Application 1.25 mm Hex Tool for Contra-Angle SHT-C For HC, SCA, ACA, ANA, BBA, FS, TS 1.25 mm Hex Tool Long 1.25 Hex Tool SHT SHT-L For HC, SCA, ACA, ANA, BBA, FS, TS For HC, SCA, ACA, ANA, BBA, FS, TS 1.8 Hex Tool LHT For OBA, CBA Long 1.8 Hex Tool LHT-L For OBA, CBA

14 S E L F T H R E A D 4.20 & 5.00 P r o s t h e t i c E l e m e n t s Cat No Material Application Over-Denture Ball-Attachment W-BBA 0.5 W-BBA 2 W-BBA 4 W-BBA mm 2 mm 4 mm 6 mm Surgical Titanium Alloy & Nylon Cap Over-Denture Ball Attachment Nylon Cap NC Nylon For W-BBA Metal Housing MH Stainless steel For NC Over-Denture Base W-OBA 3 W-OBA 5 3 mm 5 mm Surgical Titanium Alloy Over Denture Bar Attachment & Fixed Detachable Bridge Bridge Base W-CBA 1 W-CBA 2 W-CBA 4 1 mm 2 mm 4 mm Surgical Titanium Alloy Fixed Detachable Bridge Screw-in Anti-Rotation W-SCA Surgical Fixed Detachable Titanium Alloy Bridge W-ACA 10 mm Surgical Fixed Cemented Titanium Alloy Crown & Bridge Wide Anti-Rotation W-ACA-P Surgical Anatomic Titanium Alloy for Esthetic Crown Restoration Esthetic W-ACA-E 1 W-ACA-E 2 W-ACA-E 3 W-ACA-E 4 7 mm 9 mm 10 mm Surgical Titanium Alloy Fix Cemented Crown & Fixed Cemented Bridge Gold Castable W-PGA 12 mm Gold Base & Plastic Sleeve Retrievable Crown & Castable Titanium Castable W-PTA 12 mm Titanium Base & Plastic Sleeve Retrievable Crown & Castable Plastic Castable Anti- Rotation Zirconium Anti-Rotation Zirconium Cemented to Titanium Full Anti-Rotation W-PCA 10 mm Plastic Titanium Screw Castable for Cemented Crown & Bridge / One Piece Retrievable Crown W-ZTA W-ZTA-B 12 mm 12 mm Zirconium with Titanium base & Titanium Screw One Piece Retrievable Crown for Cemented Crown & Bridge W-ACA-R 12 mm Surgical Titanium Alloy Castable for Cemented Crown & Bridge / One Piece Retrievable Crown

15 S E L F T H R E A D 4.20 & 5.00 P r o s t h e t i c E l e m e n t s Cat No Material Application 15 Angulated 25 Angulated W-ANA 15 W-ANA 25 Surgical Titanium Alloy Fix Cemented Crown& Fixed Cemented Bridge Shouldered 15 Angulated W-ANA 15 - E-1 W-ANA 15 - E-2 1 mm 2 mm Surgical Titanium Alloy Fix Cemented Crown Fixed Cemented Bridge M o d u l a r S h o u l d e r e d A b u t m e n t S y s t e m Cat No Material Application Modular Shouldered W-ACA-G-1 W-ACA-G-2 W-ACA-G-3 W-ACA-G-4 1 mm 2 mm 3 mm 4 mm Surgical Titanium Alloy Fixed Cemented Bridge & Crown Impression Transfer G-PT Plastic Closed Tray Impression Comfort Cap G-HC Plastic For ACA-G Analog GL Stainless Steel Analog Castable Sleeve GC-R Plastic For Wax Up Anti-Rotation Castable Sleeve GC-F Plastic For Wax Up U n i v e r s a l U n i t S y s t e m Straight W-MU-1 W-MU-2 W-MU-3 W-MU-4 1 mm 2 mm 3 mm 4 mm Surgical Titanium Alloy 25º W-MU mm Surgical Titanium Alloy MU-Comfort Cap MU-HC 2.5 mm Plastic Cap Titanium Screw Fixed Detachable Bridge Fixed Detachable Bridge Includes MU-S screw MU-Castable Sleeve MU-PC 12 mm Plastic For Wax Up MU-Titanium Sleeve MU-TPC 12mm Plastic For Provisional Bridge MU-Fixation Screw MU-FS 2.5mm Surgical Titanium Alloy MU-Closed Impression Transfer Fixation Screw MU-AAT Stainless Steel Closed Tray Impression MU-Opened Impression Transfer MU-AAT-L Stainless Steel Opened Tray Impression MU-Analog MU-CL Stainless Steel Analog MU-Tool-Hex MU-IT Stainless Steel For Hex Ratchet MU-Tool-Square MU-IT-Q Stainless Steel For Square Ratchet

16 S E L F T H R E A D 4.20 & 5.00 P r o s t h e t i c E l e m e n t s I M P R E S S I O N T R A N S F E R S W-AAT - Impression Transfer for Hex Lock Closed Tray W-AAT-L - Impression Transfer for Hex Lock Open Tray W-AST - Impression Transfer for Closed Tray with SNAP CAP T-PT - Impression SNAP CAP for W-AST TS - Transfer for Detachable Bridge on W-OBA & W-CBA. A N A L O GS W-IL - Implant Analog BL - Analog for W-OBA CL - Conical Analog for W-CBA BNL - Ball Attachment Analog for W-BBA CA S TA B L E P L A S T I C S L E E V E S & F I X AT I O N S CR E W S PC 8 & 12 - Plastic Cylinder 8 & 12 mm for W-OBA PC-T - Titanium Cylinder for W-OBA CPC - Conical Plastic Cylinder for W-CBA CPC-T - Titanium Cylinder for W-CBA FS 3, 8 & 12 - Fixation Screw 3, 8 & 12 mm for Detachable Bridge P R O S T H E T I C T O O L S Cat No Application 1.25 mm Hex Tool for Contra-Angle SHT-C For W-HC, W SCA, W-ACA, W-ANA, W-BBA, FS, TS 1.25 mm Hex Tool SHT For W-HC, W-SCA, W-ACA, W-ANA, W-BBA, FS, TS Long 1.25 Hex Tool SHT-L For W-HC, W-SCA, W-ACA, W-ANA, W-BBA, FS, TS 1.8 Hex Tool LHT For W-OBA, W-CBA Long 1.8 Hex Tool LHT-L For W-OBA, W-CBA

17 L O GI C I M P L A N T S Ta p e re d T h re a d I m p l a n t s 3.5 m m T i t a n i u m T h r e a d I m p l a n t s L GI mm 11.5 mm 16 mm LGI LGI LGI LGI LGI Pre-Mounted ø 3.50 Titanium Integrated Surface Self Tapping Implant 4.3 m m T i t a n i u m T h r e a d I m p l a n t s L GI mm 11.5 mm 16 mm LGI LGI LGI LGI LGI Pre-Mounted ø 4.30 Titanium Integrated Surface Self Tapping Implant 5.0 m m T i t a n i u m T h r e a d I m p l a n t s L GI mm 11.5 mm 16 mm LGI LGI LGI LGI LGI Pre-Mounted ø 5.0 Titanium Integrated Surface Self Tapping Implant Integrated Surface - Large Grit Sand Blasted & Acid Etched 15

18 L O GI C I M P L A N T S S u r g i c a l D r i l l s L O GI C I n t e r n a l I r r i g a t i o n D r i l l S e q u e n ce Soft Bone Hard Bone LGI 3.50 LGI 4.30 LGI 5.00 RB ø 2 mm PD ø 2.50 mm FSD ø 2.80 mm NTD ø 3.20 mm STD ø 3.50 mm CSD ø 3.65 mm GTD ø 4.30 mm WTD P l a ce m e n t o f L o g i c I m p l a n t s After exposure of the bone penetrate the bone to the depth of using a PD 2mm internal irrigation drill. X-rays can be taken with paralleling tool placed in preparation to evaluate length and direction. Use FSD 2.50mm internal irrigation drill to achieve required depth The GTD 3.65 mm internal irrigation drill completes the preparation of the Logic 5.00 implant in soft bone. In case of dense bone, use the WTD 4.30 mm internal irrigation drill to complete preparation. Hold the implant mount and thread the implant into the preparation site, continue using a Ratchet or Hex Screw Driver (HR, HSD) with adaptor (RAD) or Insertion Tool (LIT-S, LIT-M) or LIT-C for contra angle Use NTD 2.80mm internal irrigation drill to complete the preparation for the Logic 3.50 implant in soft bone. In case of dense bone, the preparation should be enlarged with a STD 3.20 mm internal irrigation drill and CSD internal irrigation drill for cervical preparation. The STD 3.20 mm internal irrigation drill completes the preparation for the Logic 4.3 Implant in soft bone. In case of dense bone, use the GTD 3.65 mm internal irrigation drill to complete the preparation Undo the connection screw using a 1.25 mm Hex Tool (SHT) and remove mount. If necessary use long Insertion Tool (NL/SL-LIT) to continue screwing the implant. Connect the cover screw or healing cap using the 1.25 Hex Tool (SHT). 16

19 L O GI C I M P L A N T S S u r g i c a l K i t S U R GI CA L I N S T R U M E N TAT I O N HR - Hex Ratchet HR-TW Torque Wrench Ncm HSD - Hex Screw Driver NL-LIT-S/L - Short/Long Insertion Tools for LGI 3.5 SL-LIT-S/L - Short/Long Insertion Tools for LGI 4.3 & 5.0 LIT-S - Short Insertion Tool for Mount RAD - Hex to Square Adaptor LIT-C - Insertion Tool for Contra Angle DL - Drill Extension SHT Hex Tool PT - Paralleling Tool SHT-L Long Hex Tool VS - Sleeve for disconnecting Mount SHT-C Hex Tool for Contra Angle H E A L I N G CA P S NL-HC 3-3 mm Healing Cap for LOGIC 3.5 NL-HC 5 5 mm Healing Cap for LOGIC 3.5 NL-HC-F - Full Healing Cap for LOGIC 3.5 SL-HC- - 3 mm Healing Cap LOGIC 4.3 & 5.0 SL-HC- - 5 mm Healing Cap LOGIC 4.3 & 5.0 SL-HC-F - Full Healing Cap for LOGIC 4.3 &

20 L O GI C I M P L A N T S P ro s t h e t i c E l e m e n t s L GI 3.5 L GI 4.3 & 5.0 UNIVERSAL UNIT COMPONENTS & TOOLS Over-Denture Ball-Attachment Nylon Cap NL-BBA - 2 NL-BBA - 4 NL-BBA - 6 NC 2 mm 4 mm 6 mm Over-Denture Ball-Attachment Nylon Cap SL-BBA - 2 SL-BBA - 4 SL-BBA - 6 NC 2 mm 4 mm 6 mm MU - Healing Cap MU - Castable Sleeve MU-HC MU-PC 2.5 mm 12 mm Metal Housing Anti-Rotation MH NL-ACA NL-ACA NL-ACA NL-ACA mm 2.5 mm 3.5 mm 4.5 mm 15 Angulated NL-ANA mm Impression Transfer (Closed Tray) SNAP CAP NL-AAT T-PT Metal Housing Anti-Rotation 15 Angulated Impression Transfer (Closed Tray) SNAP CAP MH SL-ACA SL-ACA SL-ACA SL-ACA SL-ANA - 15 SL-AAT T-PT 1.5 mm 2.5 mm 3.5 mm 4.5 mm 1.5 mm MU - Titanium Sleeve MU - Fixation Screw MU - Closed Impression Transfer MU - Opened Impression Transfer MU - Analog MU-TPC 12 mm MU-FS 2.5 mm MU-AAT MU-AAT-L MU-CL Impression Transfer for Closed Tray NL-AST Impression Transfer for Closed Tray SL-AST MU - Hex Tool MU-IT Impression Transfer for Open Tray NL-AAT - L Impression Transfer for Open Tray SL-AAT - L MU - Square Tool MU-IT-Q Implant Analog NL-IL Implant Analog SL-IL Plastic Castable NL-PCA Plastic Castable SL-PCA Gold Castable NL-PGA 12 mm Gold Castable SL-PGA 12 mm Zirconium/Titan. NL-ZTA 12 mm Zirconium/Titan. SL-ZTA 12 mm Universal Unit NL-MU 1,2,3,4 mm Universal Unit SL-MU 1,2,3,4 mm 18

21 V I S I O N I M P L A N T S Ta p e re d T h re a d I m p l a n t s 3.5 m m T i t a n i u m T h r e a d I m p l a n t s V R I mm VRI VRI VRI VRI Pre-Mounted ø 3.50 Pure Titanium Integrated Surface Thread Implant Including Titanium Cover Screw 4.3m m T i t a n i u m T h r e a d I m p l a n t s V R I mm VRI VRI VRI VRI Pre-Mounted ø 4.30 Pure Titanium Integrated Surface Thread Implant Including Titanium Cover Screw 5.0 m m T i t a n i u m T h r e a d I m p l a n t s V R I mm VRI VRI VRI VRI Pre-Mounted ø 5.0 Pure Titanium Integrated Surface Thread Implant Including Titanium Cover Screw Integrated Surface - Large Grit Sand Blasted & Acid Etched 19

22 V I S I O N I M P L A N T S S u r g i c a l D r i l l s V I S I O N I M P L A N T S D R I L L S E Q U E N CE VRI 3.50 VRI 4.30 VRI 5.00 RB ø 2.00 PD ø 2.50 FSD ø 2.80 NTD ø 3.20 STD CSD ø 3.65 GTD CSD ø 4.30 WTD CSD P l a ce m e n t o f V i s i o n I m p l a n t s 1. After exposure of the bone penetrate the bone to the 6. GTD 3.65 mm internal irrigation drill with WTD 4.3 mm depth of using a PD 2 mm internal irrigation drill. internal irrigation drill to depth of 8- complete the preparation of the Vision 5.00 implant in soft bone. 2. X-rays can be taken with paralleling tool placed in In case of dense bone, the cervical preparation should preparation to evaluate length and direction. be enlarged with full length of CSD internal irrigation drill. 3. Use FSD 2.50 mm internal irrigation drill to achieve required depth. 7. Hold the implant mount and thread the implant into the preparation site, continue using a Ratchet or Hex 4. NTD 2.80 mm internal irrigation drill with STD 3.20 mm Screw Driver (HR, HSD) with adaptor (RAD) or insertion internal irrigation drill to depth of 8- completes tool (LIT-S, LIT-M) or LIT-C for contra angle. the preparation for the Vision 3.50 implant in soft bone. In case of dense bone the cervical preparation should be 8. Undo the connection screw using a 1.25 mm Hex Tool enlarged with CSD internal irrigation drill until first line (SHT) and remove mount. If necessary use long of the drill. Insertion Tool (NV/RV/WV-LIT) to continue screwing the implant. 5. STD 3.20 mm internal irrigation drill with GTD 3.65 mm internal irrigation drill to depth of 8- complete 9. Connect the cover screw or healing cap using the 1.25 the preparation of the Vision 4.3 Implant in soft bone. Hex Tool (SHT). In case of dense bone the cervical preparation should be enlarged until second line of CSD internal irrigation drill. 20

23 V I S I O N I M P L A N T S S u r g i c a l K i t S U R GI CA L I N S T R U M E N TAT I O N HR - Hex Ratchet HR-TW- Torque Wrench Ncm HSD - Hex Screw Driver RAD - Hex to Square Adaptor DL - Drill Extension PT - Paralleling Tool VS - Sleeve for disconnecting Mount NV-LIT-S/L - Short/Long Insertion Tool for VRI 3.5 RV-LIT-S/L - Short/Long Insertion Tool for VRI 4.3 WV-LIT-S/L - Short/Long Insertion Tool for VRI 5.0 LIT-S - Short Insertion Tool for Mount LIT-C - Insertion Tool for Contra Angle SHT Hex Tool SHT-L Long Hex Tool SHT-C Hex Tool for Contra Angle H E A L I N G CA P S NV-HC 3-3 mm Healing Cap for VISION 3.5 NV-HC - 5 mm Healing Cap for VISION 3.5 NV-HC 7-7 mm Healing Cap for VISION 3.5 RV-HC-3-3 mm Healing Cap VISION 4.3 RV-HC-5-5 mm Healing Cap VISION 4.3 RV-HC-7-7 mm Healing Cap VISION 4.3 WV-HC-3-3 mm Healing Cap VISION 5.0 WV-HC-5-5 mm Healing Cap VISION 5.0 WV-HC-7-7 mm Healing Cap VISION

24 V I S I O N P ro s t h e t i c E l e m e n t s V R I 3.5 V R I 4.3 V R I 5.0 Over-Denture Ball-Attachment NV-BBA - 1 NV-BBA - 2 NV-BBA - 3 NV-BBA mm 2 mm 3 mm 4 mm Over-Denture Ball-Attachment RV-BBA - 1 RV-BBA - 2 RV-BBA - 3 RV-BBA mm 2 mm 3 mm 4 mm Over-Denture Ball-Attachment WV-BBA - 1 WV-BBA - 2 WV-BBA - 3 WV-BBA mm 2 mm 3 mm 4 mm Nylon Cap NC Nylon Cap NC Nylon Cap NC Metal Housing MH Metal Housing MH Metal Housing MH Anti-Rotation NV-ACA - 1 NV-ACA - 2 NV-ACA - 3 NV-ACA mm 2 mm 3 mm 4 mm Anti-Rotation RV-ACA - 1 RV-ACA - 2 RV-ACA - 3 RV-ACA mm 2 mm 3 mm 4 mm Anti-Rotation WV-ACA - 1 WV-ACA - 2 WV-ACA - 3 WV-ACA mm 2 mm 3 mm 4 mm 15 Angulated NV-ANA mm 15 Angulated RV-ANA mm 15 Angulated WV-ANA mm Impression Transfer for Closed Tray NV-AAT Impression Transfer for Closed Tray RV-AAT Impression Transfer for Closed Tray WV-AAT SNAP CAP T-PT SNAP CAP T-PT SNAP CAP T-PT Impression Transfer for Closed Tray NV-AST Impression Transfer for Closed Tray RV-AST Impression Transfer for Closed Tray WV-AST Impression Transfer for Open Tray NV-AAT - L Impression Transfer for Open Tray RV-AAT - L Impression Transfer for Open Tray WV-AAT - L Implant Analog NV-IL Implant Analog RV-IL Implant Analog WV-IL Titanium Castable NV-PTA 12 mm Titanium Castable RV-PTA 12 mm Titanium Castable WV-PTA 12 mm Plastic Castable (Round) NV-PCA Plastic Castable RV-PCA Plastic Castable WV-PCA NV-PCA-R (Round) RV-PCA-R (Round) WV-PCA-R Straight NV-MU 1,2,3,4 Straight RV-MU 1,2,3,4 Straight WV-MU 1,2,3,4 U n i v e r s a l U n i t Co m p o n e n t s : MU - Healing Cap MU - Castable Sleeve MU - Titanium Sleeve MU - Fixation Screw MU - Closed Impression Transfer MU - Open Impression Transfer MU - Analog MU - Hex Tool MU - Square Tool : MU-HC MU-PC MU-TPC MU-FS MU-AAT MU-AAT-L MU-CL MU-IT MU-IT-Q :