INDEX. INTRODUCTION Page 4 IMPLANTS ABUTMENT IMPRESSION COPYING SURGICAL KITS TOOLING. Individual abutments Page 14

Transcription

1 CATALOG

2 INDEX INTRODUCTION Page 4 IMPLANTS Page 6 Page 8 Page 10 Page 12 Page 13 ABUTMENT Individual abutments Page 14 Abutments for screw components Page 18 Ball attachments and components Page 19 Locator abutments and components Page 20 IMPRESSION COPYING Impression components Page 22 Analogs Page 23 SURGICAL KITS CORkit Basic Page 24 CORkit Premium Page 25 CORkit Prime Page 25 TOOLING Surgical instruments Page 26 3

3 INTRODUCTION Cortex was founded in 2007 by a group of entrepreneurs, specialists in Maxillo Facial surgery, dentists, and other professional experts, all of whom have accumulated many years experience in surgery, consulting and training in others implant manufaturers worldwide. What has brought all these people together into a single group, is the vision, and the ambition, of founding an implant company which will offer innovative products embodying the world s most advanced techniques of design and finishing while at the same time giving maximum consideration to the needs of the clinician working in the field of dental implants. The targets which Cortex has set itself are as follows: 1. To offer innovative and patent-protected products. 2. To achieve the greatest possible precision in fitting the components which it produces. 3. To produce the cleanest possible surfaces, with the best possible morphology for osseointegration. 4. To produce an easy-to-use package, which will meet the strictest of sterilization standards. 5. To include in the package all the components required, to enable the practicing clinician to adopt whatever strategy he chooses, during the surgical procedure. 6. To simplify surgical and recovery procedures as far as possible. 7. To establish training frameworks, to reinforce the confidence of clinicians. 8. To share the knowledge and experience of clinicians worldwide. CORTEX IMPLANTS Cortex Implants are manufactured from Titanium alloys (Ti6Al4V- ELI). Material highly successful for the fabrication of dental implants due to is combination of mechanical properties such as low specific weight, high strength/weight ratio, high modulus of elasticity, high corrosion resistance and excellent general biocompatibility. The Cortex manufacturing plants operate in conformity with ISO Standard 2001, and with ISO (medical). They have undergone inspection of European Notified Body (CE 0473) for approval of the design, manufacture, and quality assurance systems of Cortex Implants, prosthetic components, and surgical tools. The company s products also have the approval of the U.S. FOOD AND DRUG ADMINISTRATION (FDA). At the present time, the Cortex Co. is completing registration and regulatory procedures in a number of other countries. AMAR Surface area of Cortex Implants The reaction of the bone to the implant is determined by the load, the morphology and by the modification of the surface chemistry in the nano scale. The roughness and microgeometry are achieved by sandblasting and acid etched. This surface developed with the collaboration of University, improve the bone contact implant surface (BIC) by increasing the envelope surface by 3 or 4 and improve the mechanical anchorage of the cells. 4

4 Laboratory tests Cortex carries out all the necessary laboratory tests and trials to ensure that production is of the highest possible quality. The company works continually with Universities and Professional Research Laboratories worldwide testing its implants or standards of precision of manufacture, materials fatigue, sterilization, chemical composition of metals and surfaces. One of the major factors in good osseointegration is the cleanliness of implant surfaces. X.P.S. testing has shown that the surfaces of Cortex implants are extremely clean, and that the components of greatest importance for osseointegration (titanium and oxygen) are present in them in a very high percentage a fact which further confirms the superior surface qualities of Cortex dental implants. All the company s products are marked with batch numbers, and all raw materials are monitored from the moment of their arrival in the manufacturing plant. All products are subject to strict quality control at all stages of production. Cortex products undergo a very severe sterilization procedure exposure to gamma rays at an intensity of 2.5 M.R. I.D., in accordance with the strictest requirements of the regulatory bodies, which have allowed Cortex implants a 5 year period of validity. The company has sufficient confidence in the quality of its implants and prosthetics, to offer them with a 15 year guarantee, on condition that they are used according to the company s instructions and regulations. DYNAMIX L11.5 D A 0473 YYYY-MM For single use only Lot Number Expiry date Reading instruction before using Caution, consult accompanying documents 5

5 A continuación destacamos las ventajas de nuevo implante CLASSIX Compresión y agarre óseo óptimos Compresión ósea horizontal lograda por la estructura cuadrada de las roscas Compresión ósea vertical lograda por el ensanchamiento gradual de las roscas y su estructura cuadrada Excelente capacidad de penetración ósea túneles de remoción Alta estabilidad primaria Ranuras de bloqueo [Patent Pending] Ranuras de bloqueo 4

6 Ø3.75 Ø3.75 Ø3.75 Switching platform - Modificación de plataforma Pilar Tejidos Blandos Hueso

7 IMPLANTS Ø3.75 Ø3.75 Ø3.75 Switching platform All implants top diameter are equal Ø3.8 Ø4.2 Ø5 Abutment Soft Tissue Bone Due to the switching platform geometry the diameter at the abutment connection of the implant is reduced and lateralize the micro-gap Better for soft tissue adaptation and reduce bone resorption Classix Sizes & Dimentions Ø mm L = 8 mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm Ø = 3.3 mm - - PCSC-1033 BCSC-1033 PCSC-1133 BCSC-1133 PCSC-1333 BCSC-1333 PCSC-1633 BCSC-1633 Ø Ø = 3.8 mm PCSC-0838 BCSC-0838 PCSC-1038 BCSC-1038 PCSC-1138 BCSC-1138 PCSC-1338 BCSC-1338 PCSC-1638 BCSC-1638 Ø = 4.2 mm PCSC-0842 BCSC-0842 PCSC-1042 BCSC-1042 PCSC-1142 BCSC-1142 PCSC-1342 BCSC-1342 PCSC-1642 BCSC-1642 L Ø = 5.0 mm PCSC-0850 BCSC-0850 PCSC-1050 BCSC-1050 PCSC-1150 BCSC-1150 PCSC-1350 BCSC Ø = 6.0 mm PCSC-0860 BCSC-0860 PCSC-1060 BCSC-1060 PCSC-1160 BCSC-1160 PCSC-1360 BCSC Drilling sequence : Soft bone - Type III, IV Marking drill Pilot ø2.0mm Implant ø3.3mm ø2.8mm Implant ø3.8mm ø3.2mm implant ø4.2mm ø3.8mm implant ø5.0mm Drilling sequence : Dense bone - Type I, II Marking drill Pilot ø2.0mm ø2.8mm Implant ø3.3mm ø3.2mm Implant ø3.8mm ø3.8mm implant ø4.2mm ø4.2mm implant ø5.0mm 7

8

9 A continuación destacamos las ventajas de nuevo implante DYNAMIX Excelente capacidad de penetración ósea Öptima compresión ósea rosca cortante La compresión vertical es lograda por el ensanchamiento gradual de las roscas. La compresión horizintal es causada por la forma cuadrada de las roscas y por la forma cónica del cuerpo del implante. fresado inicial incorrecto túneles de remoción Exelente capacidad de corte en tejido óseo Por sus cualidades éste implante le permite corregir el ángulo de inserción del mismo si ha hecho un fresado incorrecto rosca inicial 2

10 Dos anillos pasivos Cuatro roscas Alta estabilidad primaria Ranuras de bloqueo Ranuras de bloqueo [Patent Pending] Ø3.75 Ø3.75 Ø3.75 Switching platform - Modificación de plataforma Pilar Tejidos Blandos Hueso

11 IMPLANTS 2 Passive Rings 4 Threads High initial stability Thickening threads and wide pitch (gap) provide high bone grip and initial stability Two passive rings to allow biological width adaptation Implant top part four threads : Two continuing of the base threads and two new threads Incorrect Pre-drill Dynamix Sizes & Dimentions Patent Pending - Locking elements - extra resistance for anti rotational forces [Patent Pending] Excellent bone cutting capacity Narrow, long and sharp apical starting thread Milling cutting edges Ability to change penetration angle during implantation in case of incorrect pre-drilling Ø mm L = 6 mm L = 8 mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm Ø = 3.8 mm - - PCSD-0838 BCSD-0838 PCSD-1038 BCSD-1038 PCSD-1138 BCSD-1138 PCSD-1338 BCSD-1338 PCSD-1638 BCSD-1638 Ø Ø = 4.2 mm - - PCSD-0842 BCSD-0842 PCSD-1042 BCSD-1042 PCSD-1142 BCSD-1142 PCSD-1342 BCSD-1342 PCSD-1642 BCSD-1642 Ø = 4.5 mm PCSD-0645 BCSD L Ø = 5.0 mm PCSD-0650 BCSD-0650 PCSD-0850 BCSD-0850 PCSD-1050 BCSD-1050 PCSD-1150 BCSD-1150 PCSD-1350 BCSD Ø = 6.0 mm PCSD-0660 BCSD-0660 PCSD-0860 BCSD-0860 PCSD-1060 BCSD-1060 PCSD-1160 BCSD-1160 PCSD-1360 BCSD Drilling sequence : Soft bone - Type III, IV Marking drill Pilot ø2.0mm ø2.8mm Implant ø3.8mm ø3.2mm Implant ø4.2mm ø3.8mm implant ø5.0mm ø4.2mm implant ø6.0mm Drilling sequence : Dense bone - Type I, II Marking drill Pilot ø2.0mm ø2.8mm ø3.2mm Implant ø3.8mm ø3.8mm Implant ø4.2mm ø4.2mm implant ø5.0mm ø5.2mm implant ø6.0mm 9

12 IMPLANTS Following are the majors advantages of the new SMART 1PIECE implant The OP is a threaded self tapping one piece implants with an integrated abutment designed for one stage surgical procedure and cement restorations. The OP is especially designed for narrow ridges and tight spaces, for placement with small bone width and small prosthetic spaces. Its unique designed features include compress threads for immediate engagement. The OP is suitable for all bone types and for immediate loading. The insertion of the OP implant is a quick and simple one stage procedure.due to their innovative geometries and advanced surface morphology these unique implants offer high initial stability. These versatile implants can be used to restore single crowns and anterior cemented bridges. The one piece smart is available in two diameters 3.0mm and 3.3mm, have varying heights of 10mm, 11.5mm, 13mm and 16mm. Advantages: Designed for replacement of laterals in the maxilla and incisors in the mandible Minimal invasive surgery Offers fast and easy flapless procedure Designed for narrow places Solves tight spacing problems Immediate function Implant and abutment in one product Unigrip - better and even grip and pressure all way through the implant. Drilling sequence : Ø mm L = 10 mm L = 11.5 mm L = 13 mm L = 16 mm Ø = 3.0 mm CP CP CP CP Marking drill Pilot ø2.0mm CM Ø = 3.3mm CP CP CP CP

13 IMPLANTS 11

14 IMPLANT SET PREMIUM Ëstas son las ventajas de nuestro nuevo diseño de embalaje Implante y perno en el mismo embalaje Cargador directo del implante y su perno Mount / Transfer Disposable Transfer Top [Patent Pending] Transfer 6

15 Ëste embalaje le dá la posibilidad al mplantólogo de adoptar cualquiera de las estrategias durante el procedimiento quirúrgico: Costo efectivo seis elementos en un mismo embalaje

16 IMPLANTS Following are the major advantages of the new Premium implant set Pre assembled implant and abutment Simple and safe procedure Direct mounting of implant and abutment (carrier) The most sterile way of extracting the implant from its case and transferring it to the implant location Time saving and easy to use transferring system Transfer / Impression copying The firm transfer device is easily separated after mounting into two parts: The transfer top which can be disposed of Impression copying to be used as part of the implantation procedure Mount / Transfer Disposable Transfer Top [Patent Pending] Transfer Premium transfer connector Product Description Red Blue Green Black Yellow Cat Number PK-N005-R PK-N005-B PK-N005-G PK-N005-BL PK-N005-Y 12

17 IMPLANTS Allows the implantologists to adopt any implantology strategy during procedure: Two stages (submerge) One stage- Metal healing cap Plastic healing cap / Immediate loading Immediate impression Cost effective - 6 elements in one packaging Cover screw Plastic healing cap Titanium healing cap Transfer Abutment Implant Premum implant set package Product Description Cat Number Premium Straight Abutment CO-8036 Abutment Screw 9.5 CO-S030 Dental Implant - Healing Cap Plastic PK-N007 Healing Cap 3mm CO-7103 Surgical Cover Screw CS-0010 Healing Cap Plastic Product Description Healing Cap Plastic Cat Number PK-N007 Prime implant set package Product Description Cat Number Prime Driver Mount CM-0025 Dental Implant - Surgical Cover Screw CS

18 ABUTMENTS INDIVIDUAL ABUTMENTS Healing Cap 4.7mm Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver. Encoded for identification by horizontal circular marking rings, for example: 5 mm length=4 rings Healing Cap Narrow 3.8mm Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver. Encoded for identification by horizontal circular marking rings, for example: 5 mm length=4 rings Healing Cap Wide Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 6mm Used for rettention of tissue supported overdentures. Titanium Alloy ( Ti6Al4V). Final Torque 30 Ncm Straight Abutment With Collar Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Used for rettention of tissue supported overdentures. Titanium Alloy ( Ti6Al4V). Final Torque 30 Ncm 14

19 ABUTMENTS Premium Straight Abutment 7 mm 7mm 1.5mm Prosthetic Platform Cat Number Compatible for implant 3.75 CO , 3.75, 4.2, 5, 6 mm Used for cement retained, single or multiple prosthetic units.also used with a plastic impression coping for a closed tray impressions Titanium Alloy (Ti6Al4V). Included in Premium package Final Torque 30 Ncm Standard Straight Abutment Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030 Final Torque 30 Ncm Anatomic Straight Abutments Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030 Final Torque 30 Ncm Narrow Straight Abutments Prosthetic Platform Cat Number Lenght 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030 Final Torque 30 Ncm Wide Straight Abutment Prosthetic Platform Cat Number Lenght 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S030 Final Torque 30 Ncm 15

20 ABUTMENTS INDIVIDUAL ABUTMENTS Angled Abutments 15 Prosthetic Platform Cat Number Lenght 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020 Final Torque 30 Ncm Anatomic Angled Abutments 15 Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020 Final Torque 30 Ncm Angled Abutments 25 Prosthetic Platform Cat Number Lenght 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy ( Ti6Al4V). Packaged with abutment screw CO-S020 Final Torque 30 Ncm Anatomic Angled Abutments 25 Prosthetic Platform Cat Number Collar Lenght 3.75 CO mm 3.75 CO mm Used for cement retained, single or multiple prosthetic units. Titanium Alloy (Ti6Al4V). Packaged with abutment screw CO-S020 Final Torque 30 Ncm 16

21 ABUTMENTS Leaf Angled Abutments 15, 25 Prosthetic Platform Cat Number Angle 3.75 CO CO Used for cement retained, single or multiple prosthetic units Titanium Alloy ( Ti6Al4V). Packaged with abutment screw CO-S020 Final Torque 30 Ncm Zirconium Abutments Prosthetic Platform Cat Number Angle 3.75 CO-9610 Straight 3.75 CO-9615 Angled CO-9625 Angled 25 Used for cement retained, single or multiple prosthetic units Yttria - stabilized Zirconia. Packaged with abutment screw CO-S020 Final Torque 30 Ncm Custom Titanium Castable Abutments (UCLA) Prosthetic Platform Cat Number Diameter 3.75 With Hex CO With Hex CO Used for cement retained, single or multiple prosthetic units Delrin sleeve. Packaged with abutment screw CO-S030 Final Torque 30 Ncm Custom Fully Castable Abutments Prosthetic Platform Cat Number Diameter 3.75 With Hex CO-5020 Narrow 3.75 Non Hex CO-5000 Narrow 3.75 With Hex CO-5010 Wide 3.75 Non Hex CO-5030 Wide Used for cement retained, single or multiple prosthetic units Delrin sleeve. Packaged with abutment screw CO-S030 Final Torque 30 Ncm 17

22 ABUTMENTS ABUTMENTS FOR SCREW COMPONENTS Esthetic Connection Abutment Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm Used for multiple-unit restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable restorations Titanium Alloy ( Ti6Al4V). Packaged with compatible screw screw Final Torque 30 Ncm Screw for Esthetic Connection Abutment For Abutment Collar Cat Number Lenght 0.5 mm CO-S mm 1.5 mm CO-S mm 2.5 mm CO-S mm Fits Aesthetic Connection Abutments. Utilize the 1.25mm Hex Driver. Titanium Alloy ( Ti6Al4V). Final Torque 30 Ncm Plastic Sleeve for Esthetic Connection Abutment Prosthetic Platform Cat Number Connection Aesthetic connection Abutment CO CO Hex Non Hex May be trimmed for height and shape Delrine 18

23 ABUTMENTS BALL ATTACHMENTS AND COMPONENTS Ball Attachment Prosthetic Platform Cat Number Collar Height 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm 3.75 CO mm Used for rettention of tissue supported overdentures. Titanium Alloy ( Ti6Al4V). Final Torque 30 Ncm Metallic Attachment Housing (Cap) Cat Number CO-6030 Height 3 mm For nylon insert CO-6020 housing. Used for overdentures pickup or soldering Stainless steel Nylon insert (Silicon Cap) Cat Number CO-6020 CO-6021 CO-6022 Description Standard Soft Extra soft For nylon insert CO-6020 housing. Used for overdentures pickup or soldering Stainless steel 19

24 ABUTMENTS LOCATOR ABUTMENTS AND COMPONENTS LC-LAMG: locator angle measurement guide LC-LIC00: locator impression coping-4 pack LC-LFA4: locator female analog Ø4mm-4 pack LC-LFA5: locator female analog Ø5mm-4 pack LC-LCT00: locator cor tool LC-LRMC: locator replacement male-clear-4 pack LC-LRMP: locator light retention replacement male (pink) -4 pack LC-LRMB: locator extra light retention replacement male (blue) LC-LRMG: locator extended range replacement male (green)-4 pack LC-LRMR: locator extra light Retention rep male (red) LC-LBPRM: locator black processing replacement male-4 pack LC-LPP: locator parallel post-(4 pack) 20

25 ABUTMENTS LC-LSDT15: locator square drive tool 15mm LC-LSDT21: locator square drive tool 21mm LC-LMPP10: locator male processing package-10 pack LC-LMPP2: locator male processing package-2 pack Ø 3.5 Abutments (3.75 Platfom) Part No. LC-PYLA0 LC-PYLA1 LC-PYLA2 LC-PYLA3 LC-PYLA4 LC-PYLA5 LC-PYLA6 Cuff Height 0 mm 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 21

26 IMPRESSION COPYING IMPRESSION COMPONENTS Direct Pick-up Snap Copings (Closed tray) Cat Number CO-8050 CO-8055 Height 9 mm 15 mm Used to make a closed tray, implant level impression. Hand tighten with the 1.25 mm Hex Driver Indirect Transfer Copings (Open Tray) Cat Number CO-8060 CO-8065 Used to make an open tray, implant level impression Hand tighten with the 1.25 mm Hex Driver Height 10 mm 13 mm Direct One Piece Transfer Copings (Closed Tray) Cat Number CM-0040 Height 10 mm Used to make a closed tray, One Piece abutment level impression Snap on technique Surgical Cover Screw Prosthetic Platform Cat Number Collar Height 3.75 CS mm Titanium Alloy ( Ti6Al4V) Hand tighten with the 1.25 Hex Driver. For use during submerged healing. Included with implant. 22

27 IMPRESSION COPYING ANALOGS Implant Analog Cat Number CO-8040 Used for a laboratory fabricated implant level stone models Compatible to all implant level components with a 3.75 platform Abutment Analog Cat Number CO-8045 Used for a laboratory fabricated abutment level stone models Compatible to premium abutment only CO-8030 One Piece Analog Cat Number CO-8046 Used for a laboratory fabricated abutment level stone models Compatible to One Piece implants only Abutment Screw Short (8.3mm) Cat Number Diameter CO-S Fits all abutments Low profile screw head Utilize the 1.25 mm Hex Driver Packaged with all angulated abutments Final torque 30 Ncm. Titanium Alloy - Ti6Al4V Abutment Screw Long (9.5 mm) Cat Number Diameter CO-S Fits all abutments High profile screw head Utilize the 1.25 mm Hex Driver Packaged with all Straight and UCLA abutments Final torque 30 Ncm. Titanium Alloy - Ti6Al4V 23

28 KITS SURGICAL KITS CORKIT BASIC Handy collection of surgical tooling and accessories Corkit Basic Cat Number Product CT-0800 Ratchet CT-0250 Motor Mount 1.25 Hex L22mm CT-0252 Motor Mount 2.42 Hex L20mm CT-0254 Motor Mount 2.42 Hex L28mm CT-0260 Drill Extension CT-0207 Hex Driver 2.42mm L 7mm CT-0215 Hex Driver 2.42mm L15mm CT-0107 Hex Driver 1.25mm L7mm CT-0115 Hex Driver 1.25mm L15mm CT-0410 Guide Pin 10mm x 2 CT-0413 Guide Pin 13mm x 2 CD-1003 Round bur Ø 1.9 without irrigation CD-5003 Pilot Drill Ø =2.0mm CD-5010 Drill Ø =2.8mm CD-5020 Drill Ø =3.2mm CD-5030 Drill Ø =3.8mm CD-5040 Drill Ø =4.2mm CD-5050 Drill Ø =4.8mm CK-0011 CORKIT PLASTIC KIT Surgical kit tooling with changeble inserts CK

29 TOOLING SURGICAL INSTRUMENTS Ratchet CT Depth probe CT Torque Ratchet CT Distance Indicator CT Surgical screw driver long CT Hand Ratchet CT Surgical screw driver short CT Prosthetic hand driver CT DRILLS Internal / External Irrigation Internal / External Diameter Cat Number Marking drill 1.9 CD Pilot drill internal 2.0 CD Internal Irrigation 2.8 CD Internal Irrigation 3.2 CD Internal Irrigation 3.8 CD Internal Irrigation 4.2 CD Internal Irrigation 4.8 CD Internal Irrigation 5.2 CD Pilot drill External 2.0 CD External Irrigation 2.8 CD External Irrigation 3.2 CD External Irrigation 3.8 CD External Irrigation 4.2 CD Internal / External Diameter Cat Number External Irrigation 4.8 CD External Irrigation 5.2 CD Short marking drill 1.9 CD - S1003 Short Pilot drill External 2.0 CD - S5003 Short External Irrigation 2.8 CD - S5010 Short External Irrigation 3.2 CD - S5020 Short External Irrigation 3.8 CD - S5030 Short External Irrigation 4.2 CD - S5040 Short External Irrigation 4.8 CD - S5050 Short External Irrigation 5.2 CD - S6060 Countersink CD Countersink CD

30 TOOLING Guide Pin Lenght Cat Number L=10mm CT L=13mm CT Motor mount 2.42 Hex Lenght Hex Cat Number L=20mm 2.42mm CT L=28mm 2.42mm CT Motor mount 1.25 Hex Lenght Hex Cat Number L=22mm 1.25mm CT L=28mm 1.25mm CT Drill Extension Irrigation Cat Number External Irrigation CT Internal Irrigation CT Implants Hex Keys Lenght Hex Cat Number L=7mm 1.25mm CT L=10mm 1.25mm CT L=15mm 1.25mm CT L=7mm 2.42mm CT L=10mm 2.42mm CT L=15mm 2.42mm CT

31

32