. Simplification. High Performance. Safety and Longevity. The fundamental goal is to restore the quality of life of patients.

Transcription

1 Catalog

2 2 P-I product line was developed by te Osseointegration pioneer, Professor Per-Ingvar Brånemark, jointly wit experienced scientists in world recognized entities to meet modern Implant Dentistry demands. To furter complement te P-I portfolio te company Ospol AB was acquired. Founded in 2002 Sweden, Ospol AB primarily commercialized its products in Europe, delivering outsanding tecnologies. Wit knowledge and based on scientific evidences te main objective of te P-I brand is to offer professionals and patients competitive solutions represented by:. Simplification. Hig Performance. Safety and Longevity Te fundamental goal is to restore te quality of life of patients. P-I brand belongs to Zimmer Holdings, a global ortopedic leader tat researces, develops, manufactures and commercializes solutions for reconstructive ortopedics, spine, trauma and surgery devices and, via Zimmer Dental, offers a broad portfolio of dental implants, components, biomaterials and digital dentistry. Founded in 1927 and incorporated in te United States in 2001, Zimmer is an independent public company present in more tan 100 countries worldwide.

3 Content Prostetic Interface - 4 Surfaces - 5 External Hexagon HEX S and HEX - 6 Amplified AMP - 1 Morse Taper MT - 20 Kits - 28 Instruments - 2 Accessories - 4 Surgical Sequence - 6 Torques - 8 Implant Packaging - 9 Zimmer, Zimmer Dental, ZFx, P-I, Ospol, Amplified and are Zimmer Group s properties. Oter trademarks are used for reference purposes only and belong to oter companies. (!) Some products may not be available in your region. Please ceck availability.

4 4 Prostetic Interface External Hexagon Amplified Morse Taper HEX-S HEX AMP MT Seating Conical Hexagonal Indexation Prostesis Single Partial Total Cemented Screw-retained Region Anterior Posterior Platform Switcing Micro Treads Ø (Ø.95 Components on Ø4.1 Platform) Ø (Ø.95 Components on Ø4.1 Platform) Bone Level Installation (or mm below) (or mm below) Cortical Bone Preservation Soft Tissue Maintenance Hig Estetic Demand Parallel Emergence Profile Parallel Emergence Profile Parallel Emergence Profile Parallel Emergence Profile Morse Sealing Macrogeometry

5 5 Surfaces Bone Density* Type I Type II Type III Type IV Bone Healing Potential (!) Normal Sligtly Canged Heavily Canged Advanced Tecnique Bone Augmentation Grafts Biomaterials Loading Immediate Early Delayed Surface Structure Metod Micro Topograpy Nano Topograpy Cemical Composition Oxidized + Ca+2 Micro Blasting + PIII Low Rougness Minimally Roug TiO 2 + Calcium TiO 2 * Lekolm U, Zarb GA Surfaces and Risk Factors Tere are several risk factors in Osseointegration widely described in literature. Te scedule above only demonstrates suggested use for te P-I Surfaces. Te Life Time product guarantee is limited to product replacement in case of loss. Please refer to for applicable terms and conditions. (!) As described in te literature Smart Guide.

6 6 External Hexagon Hybrid Implants HEX-S HEX Surfaces HEX-S Solid Ø Implant HEX Functional Ø Implant (!) (!) (!) Ø4.0 External Hexagon Implants are primarily utilized for rescue (Wen insertion stability is not reaced wit Ø.75). Platform Ø as te same Hexagon for Platform, allowing use of 4.1 Components (Platform Switcing).

7 7 Soft Tissue Healing Healing Abutment Divergent HEX-S HEX Healing Abutment Parallel Cover Screw Possible use of Ø4.1 Components.

8 8 Conical Abutment Indicated for multiple, screw retained prostesis HEX-S HEX Cylinders Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Analog Impression Copings Open Tray (OT) Multiple Closed Tray (CT) Multiple Healing Cap Conical Abutment - 0º Conical Abutment - 17º Divergent Conical Abutment - Straigt Parallel uses 4.1 Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º

9 9 Abutment Cemented Cylinder Indicated for single or multiple, cement retained prostesis Castable Cylinders Non Engaging (NEng) 6 mm (L) 4 mm HEX-S HEX Engaging (Eng) 6 mm (L) 4 mm Analogs 6 mm (L) 4 mm Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Possible use of Ø4.1 Components. uses 4.1 Components only.

10 10 Estetic Abutment Indicated for single or multiple, cement retained prostesis HEX-S HEX Estetic Abutment - 15º Estetic Abutment Straigt Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4.1 Components. uses 4.1 Components only.

11 11 Cylinders over Implant Indicated for single or mutiple, cemented or screw retained prostesis HEX-S HEX Cylinders over Implant Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Castable Cobalt Cromium Molybdenum Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4.1 Components.

12 12 CAD / CAM Solution HEX-S HEX Scan Body Conical Abutment (!) Overdenture Solutions Ball Abutment Ø2.5* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of Zimmer Zfx and oter systems. Please ceck availability in your region. Zimmer Zfx supplies Scan Bodies and Matcolders for te P-I product line. * Ball Abutments, Components and Instruments are universal and not listed in tis Catalog. Please ceck availability in your region. uses 4.1 Components only.

13 1 Amplified Functional Hybrid Implants Surfaces AMP AMP Ø Implant (!) Ø4. and Platform ave identical cone and index dimensions allowing intercange of Components.

14 14 Soft Tissue Healing.5 4. AMP Healing Abutment Divergent Healing Abutment Parallel Cover Screw uses 4. Components only.

15 15 Conical Abutment Indicated for multiple and single screw retained prostesis.5 4. Cylinders Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Castable Cobalt Cromium Molybdenum AMP Analog Multiple and Single Impression Copings Non-Engaging (NEng) Open Tray (OT) Multiple Closed Tray (CT) Multiple Engaging (Eng) Open Tray (OT) Single Closed Tray (CT) Single Healing Cap Conical Abutment - 0º Multiple Conical Abutment - 17º Multiple Conical Abutment - Straigt Multiple and Single Ø platform uses 4. Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º

16 16 Abutment Cemented Cylinder Indicated for single or multiple cement retained prostesis.5 4. AMP Castable Cylinders Non-Engaging (NEng) 6 mm (L) 4 mm Engaging (Eng) 6 mm (L) 4 mm Analogs 6 mm (L) 4 mm Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Abutment Cemented Cylinder 0 (!) Possible use of Ø4. and Components. uses 4. Components only. (!) Not compatible wit Healing, Impression and Cylinders system.

17 17 Estetic Abutment Indicated for single or multiple cement retained prostesis.5 4. Estetic Abutment - 15º AMP Estetic Abutment - Straigt Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4. Components. uses 4. Components only.

18 18 Cylinders over Implant Indicated for single or mutiple, cemented or screw retained prostesis.5 4. AMP Cylinders over Implant Engaging (Eng) Titanium Provisional Cobalt Cromium Molybdenum Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4. and Components. uses 4. Components only.

19 19 CAD / CAM Solutions.5 4. Scan Body Conical Abutment (!) Scan Body Implant (!) AMP Links Overdenture Solution.5 4. Locator Abutment* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of Zimmer Zfx and oter systems. Please ceck availability in your region. Zimmer Zfx supplies Scan Bodies and Matcolders for P-I product line. Te Implant Scan Bodies for AMP and MT are recommended for single units and use wit intraoral and desk scanners. For a multiple prostesis please consider P-I Conical Abutment Scan Bodies wit universal Platform. *Locator Abutment Components and Instruments are universal and not listed in tis Catalog. Please ceck availability in your region. uses 4. Components only.

20 20 Morse Taper Solid Hybrid Implants Surfaces MT MT Ø Implant (!) Platform Ø.5, 4.1 and ave identical cone and index dimensions allowing intercange of Components.

21 21 Soft Tissue Healing Healing Abutment Divergent Healing Abutment Parallel MT Cover Screw Possible use of Ø.5, 4.1 and Components.

22 22 Conical Abutment Indicated for multiple and single screw retained prostesis Cylinders Non-Engaging (NEng) Titanium Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Calcinável Cobalt Cromium Molybdenum MT Analog Multiple and Single Impression Copings Non-Engaging (NEng) Open Tray (OT) Closed Tray (CT) Engaging (Eng) Open Tray (OT) Closed Tray (CT) Healing Cap Conical Abutment - 0º Multiple Conical Abutment - 17º Multiple Conical Abutment - Straigt Multiple and Single Ø.5 and Platform uses 4.1 Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º

23 2 Abutment Cemented Cylinder Indicated for single or multiple cement retained prostesis Castable Cylinders Non-Engaging (NEng) 6 mm (L) 4 mm Engaging (Eng) 6 mm (L) 4 mm Analogs 6 mm (L) 4 mm MT Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Abutment Cemented Cylinder (!) Possible use of Components wit Ø.5, 4.1 and (!) Not compatible wit Healing, Impression and Cylinders system.

24 24 Estetic Abutment Indicated for single or multiple cement retained prostesis Estetic Abutment - 15º MT Estetic Abutment - Straigt Implant Analog Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø.5 and 4.1 Components. uses.5 or 4.1 Components.

25 25 Contour Abutment Indicated for single or multiple cement retained prostesis Cylinders Provisional Straigt 17º Castable Straigt 17º (!) A Interface MT é a mesma em todos os diâmetros de Platformas, possibilitando o intercâmbio de quaisquer Componentes sobre os Implantes Analogs Straigt 17º MT Impression Copings Straigt 17º Healing Caps Straigt 17º Contour Abutment Contour Abutment - Straigt Possible use of.5, 4.1 and Components. Contour Abutment prostetic Platform is te same as Zimmer Dental Contour Abutment.

26 26 Cylinders over Implant Indicated for single or mutiple, cemented or screw retained prostesis Cylinders over Implant Engaging (Eng) Titanium Provisional Cobalt Cromium Molybdenum MT Implant Analog Implants Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of.5, 4.1 and Components.

27 CAD / CAM Solutions Scan Body Conical Abutment (!) Scan Body Implant (!) MT Links Overdenture Solution Locator Abutment* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of Zimmer Zfx and oter systems. Please ceck availability in your region. Zimmer Zfx supplies Scan Bodies and Matcolders for te P-I product line. Te Implant Scan Bodies for AMP and MT are recommended for single units and use wit intraoral and desk scanners. For a multiple prostesis please consider P-I Conical Abutment Scan Bodies wit universal Platform. *Locator Abutment Components and Instruments are universal and not listed in tis Catalog. Please ceck availability in your region. uses 4.1 Components only.

28 28 Kits Advanced All Implants and Interfaces Surgical + Prostetic Start-up All Implants and Interfaces Ø4.1 and 4. Platform Surgical + Prostetic Stainless Steel Polymer Compact Stainless Steel L L 254 mm W H H W 40 mm 10 mm Kits Code

29 29 Kits Polymer L H W L 202 mm H 67 mm W 158 mm Kits Code

30 0 Kits Compact L H W L 120 mm H 40 mm W 80 mm Kits Code 18102

31 1 Soft Kits External Hexagon HEX* Amplified AMP* Morse Taper MT* Kits Prostetic Kit All Interfaces and Components * Placement of Implant according to selected Interface in Ø4.1 or 4. Platform. * Does not include Torque Wrenc. * Includes a andpiece and squared finising 4x4 Implant Insert Driver (Medium). (!) Ball Attacment and Locator Instruments are universal and not listed in tis catalog (Teir Universal instrumentation and tooling are not included in te kits). Please ceck availability in your region.

32 2 Instruments Implant Insertion Interface Code AMP MT All Medium Long Drivers (Wit Rings) HEX 4.1 Medium Long HEX.5 Medium Long Drivers HEX AMP MT HEX All (except HEX.5).5 Medium Long Medium Long Adapter Implant Insert Driver (Manual and Torque Wrenc) All 1110 Drills Ø Drill Ø Implant Code Instruments Conical Initial Ø Drill Implant Dense Drills Guide Pin (Direction and Dept)

33 Instruments Torque Wrenc Surgical + Prostetic Code Use wit Implant Insertion Driver Adapter and Square Adapter (4x4) Prostetic Drivers Code Driver Adapter - Square (4x4)* Hexagonal Driver Ø1.2 Hexagonal Driver Ø1.2 Hexagonal Driver Ø1.2 Sort Medium Long Conical Abutment Driver Ø2.0 Conical Abutment Driver Ø2.0 Sort Medium * Use wit Hexagonal, Conical Abutment and Manual (Squared) Drivers. * Optionally supplied wit permanent Hexagonal and Conical Abutment Drivers (Single piece). Please ceck availability in your region Instruments Abutment Retriever Code Retriever MT 1111

34 4 Accessories Code Spade Ø Round Burr Ø Drill Extension Stainless Steel - Tray Polymer - Tray 1114 Accessories Selection Abutment MT Compact - Tray 1118 MT Healing Abutment MT (Selection) Osstell SmartPegs are available for all P-I Interfaces. Please ceck availability in your region. Visit:

35 5 Replacement Laboratory Screws HEX AMP MT Screw Imp. Coping - Implant - OT Screw Imp. Coping - Implant CT Screw Imp. Coping - Conical Abutment OT Screw Imp. Coping - Conical Abutment CT Engaging (Eng) Screw Cylinders (and Abutments) Screw Cylinder - over Implant Accessories

36 6 Surgical Sequence Drill Marks During all surgical preparation, coordinated in- and out movement of drills sould be executed Irrigation must be constant and directed to te insertion margin of drills in te surgical site Ncm Only use te Torque Wrenc wen at least /4 of te Implant is inserted in surgical site Installation of Hybrid Implants sould not exceed 50 Ncm in all clinical cases Surgical Sequence Internal Grip Drivers must be completely attaced to Implants during all surgical installation. Movements to correct te direction of Implant insertion sould not be applied as te surgical site was determined by drill direction. Torques in excess of te maximum recommended torque (50Ncm) and improperly attaced drivers may cause undesired lock of Drivers inside Implants. ~ 1 mm In tese possible cases a sligt counter-torque sould be applied to remove te driver. Wen te Torque Wrenc is used by te torque andle te maximum torque sould not exceed 50 Ncm Removal of Drivers from Implants must be done vertically. Read Instruction For Use before installing products. Caution: Instruments necessary for surgical procedures, performed by qualified and trained professional, must be maintained in ideal mecanical, clean and sterile conditions.

37 7 Surgical Sequence Hybrid Implants Ø Drill 2.2 (!) r.p.m ,200 Implant. S-N-D.75 S N-D 4.0 S N-D S S N-D N-D * Optional S = Soft N = Normal D = Dense Important: During all surgical preparation, te use of Dense Drills sould be considered regardless of Implant type and bone density wit te objective of not exceeding 50Ncm of torque. Dense cortical bone removal wit Dense Drills must be always performed in low rotation (15 50 r.p.m Maximum). Dense Drills can be also used to gradually prepare surgical sites (i.e. widening of te cortical region and post extraction regions). Surgical Sequence (!) Use of Round Burr and Spade Drill are optional.

38 8 Recommended Torques (Ncm) and Drivers HEX AMP MT Driver Hybrids Implants Internal Grip Cover Screw Manual Manual Manual 1.2 Healing Abutment Straigt Conical Abutment Angled Conical Abutment Abutment Cemented Cylinder Manual Manual Manual Estetic Abutment Contour Abutment Torques Cylinder over Implant Scan Body Manual Manual 1.2 Link Ball Abutment Locator Abutment Prostetic Cylinder (Conical Abutment) Impression Coping Manual Manual Manual 1.2 (!) Caution wit cementation procedures must be adopted. A x-ray verification sould be used to evaluate and confirm te complete seating of te Components into te Implants Platform (Engaging). All P-I prostetic Components include Screws.

39 9 Implant Packaging Titanium Capsule Preserves pysical-cemical Surface properties Easy identification Color Coded Platform Datamatrix system containing key product information traceability tags Preservation of sterilization Manufacturing Date Platform Color Coding Product Description Expiry Date Dimensions Surface Datamatrix (Key Product Information ) Item Number Lot Packaging

40 40 Catalog-001-ENG