DEPARTMENT OF ART HISTORY, VISUAL ART AND THEORY UNIVERSITY OF BRITISH COLUMBIA. DSS, rooms 109 and workshop room 106 Time (fill in)



Similar documents
STANDARD OPERATING PROCEDURES FOR BOYD LAB

Health Psychology Psychology Fall 2015

Student Shop Safety Policy GS92 Page 1

Conference Block: 9:35-10:20 Office Hours for tutoring and other special needs: Wed 2:40-3:00

RESPIRATORY THERAPIST PROGRAM WALLACE COMMUNITY COLLEGE STUDENT HANDBOOK. Class of Linda Moore, BS, RRT Program Director H-110,

SYLLABUS & STUDENT CONTRACT

Tech Shop Safety Level 2 - FN Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)

General Shop Safety. 3. Wear hearing protection devices when using or when others are using loud equipment in the mechanics laboratory.

Machine/Woodworking Shop The Basic Rules

Palmer High School Construction Trades

KERN COMMUNITY COLLEGE DISTRICT BAKERSFIELD COLLEGE MCAG B2: Introduction to Mechanized Agriculture Class Syllabus

Method of Assessing Learning Outcomes Core student learning outcomes will be assessed through course assignments.

BADM 260 C Course Outline Introduction to Finance. Winter Randy Nicholls, CA MC Randy.nicholls@rdc.ab.ca

Occupational Health and Safety in the Laboratory (Undergraduate Students)

RISK MANAGEMENT. RISK MANAGEMENT chapter 4 CONTENTS. Overview Risks Choosing science activities... 46

Columbus State Community College English Department

ARTICLE 11 HEALTH AND SAFETY

University of Connecticut School of Nursing. Policy on Course Syllabi

M.F.A. HANDBOOK 2013

Erdem Selek, Assistant Professor (2015) MSc, Industrial Product Design, Istanbul Technical University, Istanbul, Turkey, 2008

School of Engineering University of Glasgow

WebAdvisor Guide Student Central s Contact Info: Student Central s Hours:

Photography I: Introduction to Photography! Course Syllabus ! River Hill High School - Visual Arts Department!

NEW RIVER COMMUNITY COLLEGE DUBLIN, VIRGINIA COURSE PLAN

SUNY Downstate Medical Center College of Nursing Graduate Program. MS and Advanced Certificate Nurse Practitioner (NP) Degree Programs

The Department of Art and Art History

Union County Public Schools. Facilities Department. Electrical. Safe Work Practices

How to Record Videos with a Webcam

Electrical and Computer Engineering Student Policy Manual

AC 430 Financial Accounting III Department of Accounting and Finance School of Business University of Alabama at Birmingham Fall 2013

NURSE AIDE CLASS SYLLABUS

Prerequisites General biology (Biology 107 or 105 and 106) each with a grade of C or better.

CERTIFIED NURSE AIDE - STUDENT ORIENTATION

AGRI 2030 Technical Communications COURSE OUTLINE January - April 2013

15GAL STEEL OIL DRAIN WITH 110V PUMP

ACALANES UNION HIGH SCHOOL DISTRICT Adopted: 3/2/05 Visual and Performing Arts Subject Area COURSE TITLE: Digital Design 1

Operating Manual Please Read Before Operating Unit

Course Syllabus AUMT Automotive Engine Repair AUTOMOTIVE TECHNOLOGY TRAINING CENTER. Houston Community College System NE. Mr.

INTERIOR DESIGN (IDSN)

Monfort College of Business Semester Course Syllabus ( ) COURSE PREFIX/TITLE: BA 205 Business Communications Sem. Hrs. 3 Ed.

School of Art Academic Year Assessment Report

PSYCH GENERAL PSYCHOLOGY Fall 2015

Safety data sheet according to 1907/2006/EC, Article 31

Personal Protective Equipment Policy & Procedure Date: August, 2001 Approved by:

Student Information Publication

CENTRAL STATE UNIVERSITY DEPARTMENT OF BUSINESS ADMINISTRATION COLLEGE OF BUSINESS AND INDUSTRY

BERGEN COMMUNITY COLLEGE BUSINESS, ARTS & SOCIAL SCIENCES Fashion Apparel Design (FAB) Departmental Policy Syllabus. FAB-110 Sewing Techniques I

School of Nursing. Accelerated Program

Monfort College of Business Semester Course Syllabus ( ) COURSE PREFIX/TITLE: BAMK 469 Supply Chain Management Sem. Hrs. 3 Ed.

CREATIVE WRITING PROGRAM GUIDELINES FOR PROSPECTIVE CREATIVE WRITING MAJORS (UPDATED JAN 2016)

The University of Texas at El Paso College of Health Sciences School of Nursing

ACADEMIC Program Review Missouri Valley College

Academic Policies. Grading Guidelines

Teens Policies and Procedures

PATIENT CARE TECHNICIAN/ASSISTANT (PTCA) STUDENT HANDBOOK

Massage Therapy Certificate Program Application for Admission 2013

Monfort College of Business Semester Course Syllabus ( )

2.) Strengthen the artistic skills and problem-solving abilities needed to create successful, thoughtful, individual artwork.

FINE ARTS: ART, DRAMA, MUSIC

CHATTANOOGA STATE COMMUNITY COLLEGE HUMANITIES & FINE ARTS DIVISION. ART 2420: Photography and Darkroom II

MONTE VISTA CHRISTIAN SCHOOL VIPA 3615 Advanced Photography: Gallery Course Syllabus

ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR HAZARD COMMUNICATION SECTION: 1700 REVISION DATE: 2/3/2012 REVISION: 4 NUMBER:

DENTAL HYGIENE PROGRAM

University of Alaska Board of Regents Program Approval Summary Form

BIO 1408 (4:3:3) General Biology I (Non-Majors) Department of Biology. Division of Arts and Sciences. Levelland Campus SOUTH PLAINS COLLEGE.

Emergency Procedures. Emergency Phone Numbers. Unisafe (Security) (07) or extension 4444 Police, Fire Service or Ambulance 1-111

Fairview Eagles Physical Education Outline

Monfort College of Business Semester Course Syllabus ( ) COURSE PREFIX/TITLE: BA 251 International Business Sem. Hrs. 3 Ed.

Certified Nursing Assistant Class Information

Online Chemistry Course (OLCC) Chemical Safety: Protecting Ourselves And Our Environment

GEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT

3053 Electrical Safety Training Program Course Outline

Guidance on preventing Slips, Trips and Falls

Lighting for Motion Pictures - CMS 3410

Art 140 Visual Foundations 3D Design

**All information contained in this syllabus is subject to change at the discretion of the Professor**

Certification Requirements by Discipline. Allied Health Sciences

Administrative Policy Memo No. 9 Attachment C April 2010

Autoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:

Facilities Operations Customer Service Standards WORK ORDER PRIORITIES

Culinary Arts. College Now Career Pathways Program Front Range Community College Program Syllabus

Oregon Coast Community College. Medical Assistant Program Handbook

El Paso Community College

International Students, 68 admission of, 75 tuition rate schedule for 47 Intramural and Recreational Activities, 66

CONSIDERATIONS FOR OUTDOOR LEARNING

IVY TECH COMMUNITY COLLEGE REGION 03 SYLLABUS MATH 136: COLLEGE ALGEBRA SUMMER Instructor: Jack Caster Telephone: ext.

Introduction to Photography

Student Induction Manual Photography Workshop

LIBR 571: Human Resource Management Course Syllabus (3)

DEPARTMENT OF CRIMINOLOGY AND CRIMINAL JUSTICE STUDIES FACULTY IN-SERVICE MEETING MINUTES & POLICY UDATES

POLICY: PHYSICAL EDUCATION SAFETY CODE: PS-13

GROOMING GUIDELINES/ DRESS CODE GUIDELINES & STANDARDS All Divisions

Curtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.

Building Solid Careers through Knowledge & Training Excellence

TURN TABLES 1.5 TON CAPACITY / 2 PC. Model 45742

Course Syllabus. Automotive Technology Training Center. Houston Community College System NE

SOCIOLOGY DEPARTMENT Graduate Program Handbook (updated May 2004)

FACULTY OF FINE ARTS Information for New Students. MAJOR in ART HISTORY and STUDIO ART

Participant Application Form

Harris Training Institute, Inc 2310 South Miami Blvd., Suite 135, Durham, NC 27703

Transcription:

DEPARTMENT OF ART HISTORY, VISUAL ART AND THEORY UNIVERSITY OF BRITISH COLUMBIA COURSE OUTLINE VISA 260 Studio: terms one or two DSS, rooms 109 and workshop room 106 Time (fill in) Professor- Richard Prince Office Old Fire Hall, Studio 2, 2038 West Mall (bright red building) Office Phone 604 822-6657 Office hours (fill in) Email reprince@interchange.ubc.ca Web www.richardeprince.com Dept. phone 604 822-2757 Technician (fill in) Office DSS, room 106 Phone 604 822-4647 Course Description This course is a basic introduction to the ideas and principles of sculpture in contemporary art practice. The intention is to develop some necessary skills and learn some essential techniques for the making of three dimensional objects. This will be done through a variety of methods and will result in an understanding of the principles of the nature and power of the transformation of materials. The class will be primarily a working studio class although there will be a considerable amount of time devoted to the examination and discussion of contemporary as well as historical sculpture. While the majority of the work will be studio production, each student will be expected to complete one academic presentation on a pertinent assigned topic. Pre-requisites Students must have completed a minimum of 12 credits of work in Fine Arts courses including at least 6 credits of art history and 6 credits of basic studio practice course (ARTH 100 or its university or college equivalent). The studio and art history courses must have been completed with a minimum mark of 72. Normally, this course is part of the selection of courses taken by those second year students intending to pursue either the B.A. (Visual Arts) or the B.F.A. programs but it may be taken by those with other academic objectives.

Format This course will normally convene in the lecture room, DSS room 109 for purposes of discussion and then will move to DSS, 106 for studio work. Lockers Each student in this class are advised to secure the use of a locker in DSS or in a nearby building. It is essential to have the use of a locker as winter coats, large pack sacks and the like are a problem in Room 106 due to the lack of storage space. University resources Students are urged to become familiar a soon as possible with those other university facilities which are necessary adjuncts to the education in the classroom. Your attention is directed to the Morris and Helen Belkin Art Gallery adjacent to the Lasserre building, the Museum of Anthropology located at the terminus of West Mall at Marine Drive and the Fine Arts Division of the Library in the North Wing of the Irving K. Barber Learning Centre. Electronic devices Lectures or classes may not be taped without the permission of the instructor and then only for valid academic reasons. Students must turn off cellular phones carried into classes or the studio or put them on answer service mode. All pagers must be turned off or put on silent signal mode. Personal sound systems (e.g., ipods) may not be used in either the lectures or the studio. Academic Concessions During your time in this course, if you encounter medical, emotional, or personal problems that affect your attendance or academic performance, please notify me as well as the Faculty of Arts Academic Advising Office located in Buchanan D 111 (phone 822-4028). Please refer to the UBC calendar for a more thorough discussion of Academic Concessions. Studio information Students are well advised to dress appropriately for a studio class. The University of British Columbia will accept no responsibility for damage to clothing. Room 106 is a workshop and so safety is a factor in dress as is avoidance of damage to good clothing. Bring an apron or smock to class if you wish. Students should wear clothing and footwear which is sturdy, secure and not flammable. Cotton and wool fabrics are preferable to synthetics. Footwear should completely enclose the foot and give a secure footing on the polished concrete floor of the workshop. Sandals or shoes with high and narrow heels are not permitted. Students who wear their hair long must bring a suitable safe covering to completely enclose the hair when using power and certain hand tools. Students are advised to remove all rings and any loose jewelry such as bracelets or necklaces before coming to class as these items can be a safety hazard.

Those who wear contact lenses will likely be more comfortable and at less risk of eye damage if they wear glasses instead, particularly if the lenses are impact resistant. Health risks There will be a minimal use of toxic and dangerous substances in this course. However room 106 is a workshop and organic solvents and other items that entail a certain amount of risk may be used from time to time. Students will be advised of any potential health hazards as needs arise and all students will be made aware of the Workplace Hazardous Materials Information System. Room 106 can often be a dusty place. If you have severe allergies to particulates and wood dusts it is advisable to contact me to outline some of the risks and remedies and to contact your physician. Workshop and Technical Assistance There is a schedule posted on the door to room 106 at the beginning of each term. It outlines the normal workshop access hours. The shop is available for use at the times indicated. Due to the wide variety of duties that are the responsibility of the technician, there may be temporary alterations to the schedule. These will be noted on the chalkboard adjacent to the schedule on the door. The technician is there to assist you with technical information, to instruct you on the use of tools and equipment and to ensure safety and good order in the shop. The technician will not do your work for you, offer aesthetic advice or criticism (even if asked), clean up after you or be responsible for your improperly stored work or forgotten possessions. The telephone in room 106 is the technician s phone. Do not use it without the express permission of the technician and do not give the number to friends and expect messages to be taken for you. Textbooks/Readings There is no textbook required for this course. From time to time in both the lecture and in the studio sessions readings will be assigned. A list of useful reference texts kept on reserve in the Fine Arts Library will be given. Supplies and Materials Materials will be supplied for some of the assignments both in-class and out of class. However, students will have to purchase a variety of supplies and tools.; a list will be given out at the beginning of the class. It is anticipated that these supplies will cost about $50. The supplies can all be purchased from a number of outlets in the Lower Mainland. Alternative products and suppliers will be discussed in class when the exact list of supplies required will be discussed.

NOTE: Students are required to have personal safety eye protection by the beginning of the second class. Students failing to bring their eye protection to class will be forbidden access to the workshop until they have obtained them. Assignments and Grading There will be a total of four assignments for this course. One making project 25% One structures project 15% One design/assembly project 25% One combination final assignment 35% Total 100% All grading is done by Richard Prince. If you wish to discuss the mark earned for any project please see me first. Absences and missed/late assignments Attendance at both the lectures and studio sessions is mandatory. As there is no textbook for the course, the information you receive and the progress you make is dependent on regular attendance as is the completion of assignments. Students who have had to miss or anticipate missing a number of classes should contact the Professor as soon as possible. Missed or late assignments will be accepted for marking only if the student has obtained a valid Doctor s note or a similar document from an appropriate person, (e.g.- Minister, Priest, Elder, etc.; see Academic Concessions at the end of this document). Late assignments should be submitted as soon as possible either to your next studio session or by bringing them to Richard Prince s office during normal office hours. Withdrawals Students wishing to withdraw from this course without any record of the course on their transcript must do so before the date noted in the University calendar. Similarly, students wishing to withdraw from this course with only a standing of W on their transcript must do so before the date noted in the University calendar. Studio Course Fees All students registered in undergraduate VISA courses must pay a $30.00 course fee per 3-credit course. Studio course fees will be applied toward supplies, equipment and materials to enable the Department to maintain the quality and effectiveness of visual art classes at U.B.C. Please note: these fees do not cover individual personal supplies purchased by students or other expenses associated with making artwork to meet course requirements. Studio course fees are due on University Add/Drop dates. Please pay your fees to the AHVA receptionist in the Lasserre Building, room 103, 6333 Memorial Road, U.B.C. Late payment of fees will result in a financial hold banning access to the SSC registration functions and graduation.

ALL PROJECTS AND PERSONAL PROPERTY MUST BE REMOVED FROM DSS BY. THOSE WHO HAVE OBTAINED LOCKERS IN M- 18 MAY LEAVE POSSESSIONS IN THE LOCKER FROM TERM 1 TO TERM 2 BUT MUST REMOVE ALL POSSESSIONS BY THE APRIL REMOVAL DATE. ITEMS LEFT AFTER THE REMOVAL DATES WILL BE IRRECOVERABLE.