IECEE OD-2037 Edition 1.7 2014-04-11 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CB Test Certificates IECEE OD-2037:2014(E)
THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varembé Fax: +41 22 919 03 00 CH-1211 Geneva 20 info@iec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee, ). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The world's leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csc@iec.ch.
IECEE OD-2037 Edition 1.7 2014-04-11 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CB Test Certificates INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE ZZ
2 IECEE OD-2037 IEC:2014(E) CONTENTS CONTENTS... 1 1 Reference Numbers of the CB Test Certificates... 3 2 Modifications to Issued CB Test Certificats... 3 3 Listing Product Categories and Product Standards... 3 4 Reference of Component Standards in the CB Test Certificate... 4 5 Products Tested Against Multiple Standards... 4 6 Reporting under Other Information... 4 7 CB Test Certificates for Sub-Assembly and Electronic Devices... 4 8 Definition of Product Families, Family Ranges or Series of Products... 4 9 Maximum contents of CB Test Certificates... 4 10 Minor modifications to be covered by CB Test Certificates... 5 11 Listing product categories and product standards... 5 12 Test Certificate Templates:... 5
IECEE OD-2037 IEC:2014(E) 3 1 Reference Numbers of the CB Test Certificates The reference numbers should begin with the reference letters according to ISO of the relevant countries (AT for Austria, BE for Belgium, etc.). The numbers should be running continuously year after year. The year of issue should not be mentioned in the reference number. In member countries with several Issuing and Recognizing NCBs the issuing NCB shall be indicated on the CB Test Certificate. 2 Modifications to Issued CB Test Certificats a) Issued due to new edition or amendment of applied standard(s). Decision: A new CB Test Certificate is issued with a new Ref.Certif.No. (CCB meeting Frankfurt am Main, 1996, and CCB meeting New Delhi, 1997) b) Issued due to misprints, changes of names or addresses. Decision: The CB Test Certificate shall be re-issued with the same Ref.Certif.No. but the letter A shall be added after the Ref.Certif.No. ie. A1, A2, A3 depending on how many changes have been made to the original Certificate. A new date and signature is required with information which Ref.Certif.No. is replaced and a short description concerning the reason for the replacement. (CCB meeting Frankfurt am Main, 1996, and CCB meeting New Delhi, 1997) On the front page of the Test Report Form the following addition should be included: "Appendix to Test Report, Reference No...." "Modification on the appliances" "Modification to clause" "Pages concerned:" Decision: (CMC meeting Geneva, Switzerland, 2001) The CMC agreed on the following: 2) Modifications on certified product are limited to three, after which a new CB Test Certificate shall be issued. This shall not preclude to issuing a new CB Test Certificate at every modification if the Member NCBs wish to do so. 3) When a product is subject to "Modifications" irrespective of the suffix used to identify the CB Test Certificate i.e. the letter "M" followed by 1, 2 or 3, the CB Test Certificate shall clearly identify the nature of such "Modifications" under "Additional Information". 4) Re-Issued CB Test Certificates shall include the original issue date and revision date under "Additional Information". 3 Listing Product Categories and Product Standards The CBTC shall list only the Product Category(ies) and Product Standard(s) against which the product has been assessed (tested and evaluated) and determined to be in compliance.
4 IECEE OD-2037 IEC:2014(E) 4 Reference of Component Standards in the CB Test Certificate Component Standards referenced in product standards shall not be identified (itemized) in the CB Test Certificate. 5 Products Tested Against Multiple Standards In some cases there can be multiple product standards such as IEC 60335-1, IEC 60335-2-7 and IEC 60335-2-11 in which case all of them shall be identified (itemized) in the CB Test Certificate. 6 Reporting under Other Information If the product is tested and evaluated in accordance with a horizontal standard for a more stringent requirement than is contained in the Product Standard, this information may be reported UNDER the appropriate section of the CBTC, Other information. NOTE: The relevant Test Report shall obviously contain this information in detail with the testing/measuring results. 7 CB Test Certificates for Sub-Assembly and Electronic Devices Subassemblies and electronic devices, e.g. electronic units control for whirlpool baths, that can be integrated/incorporated as such into end products are entitled to be tested and granted with a CB Test Certificate. The WG also agreed to slightly amend the current decision for the sake of clarity (to be done). 8 Definition of Product Families, Family Ranges or Series of Products A product family can be defined by the maximum configuration, a list of components/subassemblies plus a description of how the models are constructed from the maximum configuration and list. All models which are included in the family typically have a common design, construction, parts, or assemblies essential to ensure conformity with applicable requirements. For the same products, there may be differences in defined product families that are contingent upon the nature or type of compliance criteria applied (e.g. safety, EMC, performance, efficacy, etc.). If a product standard defined a product family, in the context of the specific standard, this definition takes over. 9 Maximum contents of CB Test Certificates A CB Test Certificate shall in general not contain more items or types of equipment than specified below: Accessories There shall only be one type in each certificate, for instance a single pole and a double pole switch should not be in the same certificate.
IECEE OD-2037 IEC:2014(E) 5 Appliances There shall only be one appliance in each certificate, for instance a drill of 150 W and a drill of 300 W should not be in the same certificate. However, certificates e.g. for room heaters of the same shape but of a length varying in accordance with the wattage (x watts per meter of the length of the room heater) may include a whole series of room heaters. General Only equipment applied for at the same time can be in one certificate. 10 Minor modifications to be covered by CB Test Certificates For minor modifications such as the change of identification marks and similar changes an addendum sheet correctly signed may be used, but it is also possible to issue a new certificate on this basis in order to have the right date. 11 Listing product categories and product standards The CBTC shall list only the Product Category(ies) and Product Standard(s) against which the product has been assessed (tested and evaluated) and determined to be in compliance. 12 Test Certificate Templates: Annex 1: CB Test Certificate Annex 2: Conformity Assessment Certificate (CAC) Annex 3: Type 5 PV Certificate Annex 4: E3 Statement of Test Results Annex 5: HSTS Statement of Test Results
Annex 1 Ref. Certif. No. IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME CB TEST CERTIFICATE SYSTEME CEI D ACCEPTATION MUTUELLE DE CERTIFICATS D ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CERTIFICAT D ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la 2 ème page Additional Information on page 2 Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Type of Manufacturer's Testing Laboratories used Type de programme du laboratoire d'essais constructeur Model / Type Ref. Ref. De type Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire,, peuvent être indiqués sur la 2 ème page Additional Information on page 2 A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport d essais numéro de référence qui constitue partie de ce Certificat This CB Test Certificate is issued by the National Certification Body Ce Certificat d essai OC est établi par l Organisme National de Certification Date: Signature: Issued 2007-04 1/2
Ref. Certif. No. Additional information (if necessary) Information complémentaire (si nécessaire) Date: Signature: Issued 2007-04 2/2
Annex 2 INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) COMMISSION ELECTROTECHNIQUE INTERNATIONALE (CEI) Ref. Certif. No. SCHEME OF THE IECEE FOR MUTUAL RECOGNITION OF CONFORMITY ASSESSMENT CERTIFICATES ACCORDING TO STANDARDS FOR SAFETY OF ELECTRICAL EQUIPMENT (CB-FCS) MÉTHODE DE L'IECEE D'ACCEPTATION MUTUELLE DE CERTIFICATS D EVALUATION DE CONFORMITÉ SELON LES NORMES DE SÉCURITÉ DE L ÉQUIPEMENT ÉLÉCTRIQUE (OC-FCS) CONFORMITY ASSESSMENT CERTIFICATE CERTIFICAT D EVALUATION DE CONFORMITE Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nome et adresse de l usine Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Type of Manufacturer's Testing Laboratories used Type de programme du laboratoire d'essais constructeur Model / Type Ref. Ref. De type Additional information (if necessary) Information complémentaire (si nécessaire) The product and the quality system of the factory meet all applicable requirements as laid down in the relevant Rules of Procedure of the IECEE Le produit ainsi que le système qualité du fabricant satisfont à toutes les exigences des Regles de Procédure applicablesde l IECEE. As shown in the Conformity Assessment Report Ref. No. which forms part of this certificate Comme indiqué dans le Rapport d Evaluation de Conformité référencé qui fait partie intégrante de ce certificat THIS CERTIFICATE IS PROVIDED SOLELY FOR THE PURPOSE OF FACILITATING THE GRANTING OF THE CERTIFICATION MARK BY THE RECOGNIZING NCBs IN THE FIELD OF THE MUTUAL RECOGNITION. CE CERTIFICAT EST DELIVRE UNIQUEMENT DANS LE BUT DE FACILITER L ATTRIBUTION DE LA MARQUE NATIONALE PAR LES NCBs DANS LE CADRE DE LA RECONNAISSANCE MUTUELLE. This FCS Conformity Assessment Certificate is issued by the National Certification Body: Ce Certificat d Evaluation de Conformité FCS est établi par l Organisme National de Certification : Date: Signature: Issued 2011-07
Annex 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) COMMISSION ELECTROTECHNIQUE INTERNATIONALE (CEI) Ref. Certif. No. SCHEME OF THE IECEE FOR MUTUAL RECOGNITION OF CONFORMITY ASSESSMENT CERTIFICATES ACCORDING TO STANDARDS FOR SAFETY OF ELECTRICAL EQUIPMENT MÉTHODE DE L'IECEE D'ACCEPTATION MUTUELLE DE CERTIFICATS D EVALUATION DE CONFORMITÉ SELON LES NORMES DE SÉCURITÉ DE L ÉQUIPEMENT ÉLÉCTRIQUE CONFORMITY ASSESSMENT CERTIFICATE CERTIFICAT D EVALUATION DE CONFORMITE Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nome et adresse de l usine Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Type of Manufacturer's Testing Laboratories used Type de programme du laboratoire d'essais constructeur Model / Type Ref. Ref. De type Additional information (if necessary) Information complémentaire (si nécessaire) The product and the factory surveillance system of the factory meet all applicable requirements as laid down in the relevant Rules of Procedure of the IECEE Le produit ainsi que le système qualité du fabricant satisfont à toutes les exigences des Regles de Procédure applicablesde l IECEE. As shown in the Conformity Assessment Report Ref. No. which forms part of this certificate Comme indiqué dans le Rapport d Evaluation de Conformité référencé qui fait partie intégrante de ce certificat As show in the factory surveillance report Comme indiqué dans le rapport de surveillance en usine THIS CERTIFICATE IS GRANTED TO ATTEST COMPLIANCE WITH THE RELEVANT STANDARDS & PROCEDURES AND FOR THE PURPOSE OF FACILITATING THE GRANTING OF THE CERTIFICATION MARK BY THE RECOGNIZING NCBs IN THE FIELD OF THE MUTUAL RECOGNITION AND/OR FOR THE DIRECT ACCEPTANCE IN THE MARKET PLACE BY THE RELEVANT AUTHORITIES. CE CERTIFICAT ATTESTE LA CONFORMITE AUX EXIGENCES DES NORMES ET PROCEDURES CONCERNEES ET A COMME OBJECTIF DE FACILITER LA RECONNAISSANCE DES RESULTATS D'ESSAI PAR LES AUTRES MEMBRES CERTIFICATEURS AINSI QUE L'ACCEPTATION DIRECTE DANS LE CADRE DU MARCHE GLOBAL PAR LES AUTORITES COMPETENTES This Conformity Assessment Certificate is issued by the National Certification Body: Ce Certificat d Evaluation de Conformité est établi par l Organisme National de Certification : Date: Signature: Issued 2011-09
Annex 4 Ref. No. IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) STATEMENT OF TEST RESULTS Product Name and address of the applicant Name and address of the manufacturer Name and address of the factory Ratings and principal characteristics Trademark (if any) Model / Type Ref. Additional information (if necessary) Additional Information on page 2 A sample of the product was tested and in accordance with the following IEC (standard(s) as resumed in the table on page 3: With details shown in the Test Report Ref. No. which forms part of this Statement of Test Results This product was tested to determine the performance result in accordance with the relevant standard(s). Participation in the Statement of Test Results (STR) service is for Issuing NCBs only. As the result of testing is a demonstration of test results in accordance with IEC test methods, Recognizing NCBs do not apply. Members and other interested stakeholders may determine the suitability and potential further use of such results. As a result, specification of National differences is not applicable. This Statement of Test Results is issued by the National Certification Body Issue Date: Signature: Issued 2014-04 1/3
Ref. No. Additional information (if necessary) Issue Date: Signature: Issued 2014-04 2/3
Performance item Energy Consumption Criteria Energy Performance Criteria Other Energy Efficiency Criteria Condition Voltage Frequency Performance Result Additional information (if necessary) Issued 2014-04 3/3
Annex 5 Ref. No. IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) STATEMENT OF TEST RESULTS Metal Polymer Electronic Component Name and address of the applicant Name and address of the manufacturer Sample description Ratings and principal characteristics Trademark (if any) Type of Manufacturer's Testing Laboratories used Model / Type Ref. Weight of the sample (in g) Additional information (if necessary may also be reported on page 2) The levels of the six hazardous substances were determined in the sample in accordance with the following IEC standard: Additional Information on page 2 IEC 62321:2008 (ed.1) As shown in the Test Report Ref. No. which forms part of this Statement of Test Results This material/component was tested to determine the levels of the six hazardous substances in accordance with the standard Participation in the Statement of Test Results (STR) service is for Issuing NCBs only. As the result of testing is a demonstration of test results in accordance with IEC test methods, Recognizing NCBs do not apply. Members and other interested stakeholders may determine the suitability and potential further use of such results. As a result, specification of National differences is not applicable. This Statement of Test Results is issued by the National Certification Body Issue Date: Signature: Issued 2014-04 1/3
Ref. No. Additional information (if necessary) Issue Date: Signature: Issued 2014-04 2/3
Hazardous substances Method Value [mg/kg] 1. Cadmium (Cd) 2. Lead (Pb) 3. Mercury (Hg) 4. Hexavalent Chromium (Cr(VI) 5. Sum of PBBs 6. Sum of PBDEs Issued 2014-04 3/3
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC SYSTEM OF CONFORMITY ASSESSMENT SCHEMES FOR ELECTROTECHNICAL EQUIPMENT AND COMPONENTS (IECEE) IECEE Secretariat c/o IEC 3, rue de Varembé 3, rue de Varembé PO Box 131 PO Box 131 CH-1211 Geneva 20 CH-1211 Geneva 20 Switzerland Switzerland Tel: + 41 22 919 02 11 Tel: + 41 22 919 02 11 info@iec.ch secretariat@iecee.org www.iec.ch www.iecee.org Issued 2014-04 5/3