Tap, Connection & Meter Set Charges (Charges Effective Since 1/1/09) NEW CONNECTION CHARGES TAP SIZE NEW NEW TOTAL CONNECTION CONNECTION COMBINED CHARGE-Water CHARGE-Sewer FEE 1"** $ 2,620.00 $ 2,235.00 $ 4,855.00 1.5" $ 5,895.00 $ 5,029.00 $ 10,924.00 2" $ 10,480.00 $ 8,940.00 $ 19,420.00 4" $ 41,920.00 $ 35,760.00 $ 77,680.00 6" $ 94,320.00 $ 80,460.00 $ 174,780.00 8" $ 167,680.00 $ 143,040.00 $ 310,720.00 10 $ 262,000.00 $ 223,500.00 $ 485,500.00 12 $ 377,280.00 $ 321,840.00 $ 699,120.00 **1 tap will be made for 5/8 and 3/4 meters Connection Charges For Fire Service Connections (Charges Effective Since 1/1/09) NEW FIRE NEW FIRE TOTAL TAP CONNECTION CONNECTION COMBINED SIZE CHARGE-Water CHARGE-Sewer FEE 1"** $ 2,620.00 $ 2,235.00 $ 4,855.00 1.5" $ 5,895.00 $ 2,235.00 $ 8,130.00 2" $ 10,480.00 $ 2,235.00 $ 12,715.00 4" $ 41,920.00 $ 5,029.00 $ 46,949.00 6" $ 94,320.00 $ 8,940.00 $ 103,260.00 8" $ 167,680.00 $ 35,760.00 $ 203,440.00 10 $ 262,000.00 $ 80,460.00 $ 342,460.00 12 $ 377,280.00 $ 143,040.00 $ 520,320.00 Page 1 jp 7/1/2015
NEW METER SET FEES 7/1/15 New PD Meter Set W/Radio MTU ¾ short New PD Meter Set W/Radio MTU ¾ New PDMeter Set W/Radio MTU 1 New Meter PD Set W/Radio MTU 1.5 New Meter PD Set W/Radio MTU 2 MTU 2 MTU 2 1/2 MTU 3 MTU 4 MTU 6 MTU 8 MTU 10 MTU 12 $440 $490 $550 $750 $940 $3,585 $3,960 $3,660 $ 4,300 $4,600 $5,620 $6,072 $6,950 3-6 Domestic meters will now all be Mag meters unless approved for the compound style under special circumstances by Management. All Mag meter prices include a single port mtu and require AC power. Deduct meters do not have to be Mag meters, however Blowdown meters must be Mag If the contractor does not want them to be Mag then they will pay the non-mag meters listed above. Page 2 jp 7/1/2015
New Mag Meter Set 5/8 New Mag Meter Set ¾ New Mag Meter Set 1 New Mag Meter Set 1.5 New Mag Meter Set 2 MTU Radio Unit Single Port MTU Radio Unit Dual Port MTU Radio Unit Single Port Extended Range MTU Radio Unit Dual Port Extended Range $3,440 $3,585 $170 $195 $182 $210 *Remote vs. Closed Coupled to be determined by Utility NEW METER CHANGE OUT FEES 7/1/15 ** These fees should be used for ALL damaged meters including hydrant meters** PD Meter Changeout 3/4 short NO MTU/horn @ PD Meter Changeout 3/4 NO MTU/horn @ PD Meter Changeout 1 NO MTU/horn @ PD Meter Changeout 1.5 NO MTU/flange @ $240 $240 $290 $580 PD Meter Changeout 2 NO MTU/flange @ $745 Mag Meter Changeout 5/8" NO MTU/cable $3,070 Mag Meter Changeout 3/4" NO MTU/cable $3,070 Page 3 jp 7/1/2015
Mag Meter Changeout 1" NO MTU/cable $3,070 Mag Meter Changeout 1.5" NO MTU/cable $3,310 Mag Meter Changeout - 2" NO MTU/cable $ 3,675 Mag Meter Changeout 2 1/2" NO MTU/cable $ 4,050 Mag Meter Changeout - 3" NO MTU/cable $3,750 Mag Meter Changeout - 4" NO MTU/cable $4,200 Mag Meter Changeout - 6" NO MTU/cable $4,495 Mag Meter Changeout - 8" NO MTU/cable $5,515 Mag Meter Changeout - 10" NO MTU/cable $ 5,970 Mag Meter Changeout - 12" NO MTU/cable $ 6,845 Replace Damaged Mag Meter Transmitter $1,750 Replace Damaged Mag Meter Transmitter with $2,965 Upgrade Conversion Kit New UL Rated Fire Meter Change out with ¾ I- $490 Perl Meter UL Rated Fire Meter Set with ¾ I-Perl Meter $280 Page 4 jp 7/1/2015
WATER SERVICE TAP FEES 7/1/15 (Referred to as Water Service Connection in July 1, 2015 City of Ann Arbor Water Utilities Department Rules and Regulation Document) SIZE OF SERVICE CONNECTION CHARGE - UTILITY DUG CHARGE - CONTRACTOR DUG 1 $ 5,819 $ 730 1.5 Figure 4(Domestic & Fire Supp) n/a $ 1502 1.5 $ 5,981 $ 1103 2 $ 6,108 $ 1377 2 Figure 4(Domestic & Fire Supp) n/a $ 1746 4 & Larger Time & Material SANITARY & STORM SEWER TAP FEES (Referred to as Sewer Service Connection in July 1, 2015 City of Ann Arbor Water Utilities Department Rules and Regulation Document) The sewer tap fees for sanitary sewer and storm sewer shall be in the amount of $582.00 each, payable at the time of application for a sewer tap permit from the Water Utilities Customer Service Department. CONVERSION CREDITS FOR METER SIZE ENLARGEMENT Whenever water meters serving an existing premises are enlarged and the customer originally paid a water permit charge based on meter size, the original meter size will be converted to tap size and the difference between the equivalent tap size and the actual tap size shall be levied. (Ordinance No. 49-03; 2:22 and 2:42.4) The corresponding dollar amounts for equivalent tap size for both water and sewer connections are provided in the chart below. ORIGINAL METER SIZE EQUIVALENT TAP SIZE WATER CONNECTION CHARGE EQUIVALENT TAP SIZE SEWER CONNECTION CHARGE 5/8 $ 2,620.00 $ 2,235.00 3/4 $ 4,094.00 $ 3,492.00 1 $ 5,895.00 $ 5,029.00 1.5 $ 10,480.00 $ 8,940.00 2 $ 23,580.00 $ 20,115.00 3 $ 41,920.00 $ 35,760.00 4 $ 65,500.00 $ 55,875.00 6 128,380.00 $109,515.00 The charge that the customer must pay is calculated by subtracting the credited amount identified in the chart above, from the new meter (equivalent tap) size in the Connection Charges table (see previous page). For example, if a customer is going from a 5/8 meter to a 1.5 meter, the water connection charge credit will be $2620.00 and the sewer connection charge credit will be $2235.00. The new water connection charge will be $5895.00 and the new sewer connection charge will be $5029.00 $5895.00 - $2620.00 = $3,275.00 (Water Service Connection Charge - existing service credit) $5029.00 - $2235.00 = $2,794.00 (Sewer Service Connection Charge - existing service credit) In this example, the customer would pay a $3,275.00 Water Service Connection Charge and a $2,794.00 Sewer Service Connection Charge, or a total of $6,069.00 in addition to the connection charges, the customer must pay the corresponding new meter set fee. Page 5 jp 7/1/2015