Runtastic rechargeable battery for iphone 4, 4S
Thank you very much for purchasing our product, the runtastic rechargeable battery (model no.: RUNBATT1) for the iphone 4. This product is only to be used with the iphone 4. This battery casing can be used both to extend the operating time of your iphone 4 when you are on the go and as a docking station with a built-in synchronisation and charging cable when you are at home or in the office. Hassle-free cable, protective case, docking function, synchronisation function, extended battery life. The runtastic RUNBATT1 rechargeable battery has been developed for the high demands of the mobile device user. Package contents Battery housing RUNBATT1 Operating instructions Bag Precautionary measures to be noted before use Read these operating instructions carefully as improper use of lithium polymer batteries may result in risks such as overheating, development of vapors, fire, etc.
To avoid scratches on your iphone 4 & RUNBATT1, clean the devices with a cleaning cloth before plugging your iphone 4 into the RUNBATT1. Do not open the charger device or dismantle it. Do not throw the device and avoid shocks. Do not drill through or burn the device. Keep the device out of the reach of children. Keep the device away from heat sources or environments with high temperatures and do not expose to strong sunlight such as direct sun radiation in a vehicle. Do not expose the rechargeable battery to moisture and do not submerge it. Store it dry at all times. Do not attempt to charge the battery other than with the built-in USB cable. If the battery is charged otherwise, this may result in overheating, explosion or fire. Do not recharge this battery close to heat sources or in the car under high sun exposure. The high temperature leads to the destruction of the rechargeable battery and may result in overheating, explosion and fire. This rechargeable battery has only been developed for use with the suitable mobile device as specified on the packaging. The manufacturer is not responsible for
damages on a mobile device, caused by improper use of this product. This rechargeable battery cannot be replaced and may not be removed. Disregarding these notes may shorten the operating life of the built-in rechargeable battery or cause damage to the device. Disclaimer: The distributor and its retailers are in no way liable to you or a third party regarding damages, which you or a third party may suffer due to intended or unintended use or improper use of this rechargeable battery in conjunction with another device, which does not match the device for which the rechargeable battery has been developed. Risks for children and people in need of care The use of this device is not intended for people (including children) with limited physical, sensory or mental abilities or lack of experience and/or lack of knowledge, unless they are supervised by a person responsible for their safety or have been instructed on the use of the device by such person.
Disposal Batteries are hazardous waste. For the correct disposal of batteries, appropriate containers are provided at the premises of commercial battery dealers as well as local council waste disposal facilities. If you want to dispose of your Runtastic rechargeable battery, follow the provisions current at the time. Information may be obtained from the local council waste disposal facility. KRIPPL-WATCHES Warenhandels GmbH Maria-Theresia-Straße 41, 4600 Wels, Austria Dispose of the packaging in compliance with the current provisions. Information may be obtained from the local council waste disposal facility.
Recharging your runtastic battery Connect the RUNBATT1 to a power source by using the built-in USB cable, which can be found at the back of the device. The USB cable can be connected to any PC or any wall socket with a USB port (5V output such as the standard iphone 4 USB wall adapter) or the car charger with a USB port (5V output). The LEDs at the front flash whilst the battery charges. They turn off once the battery has been fully charged. The normal charging time is 3 hours. The RUNBATT1 can be charged with or without the iphone 4 inserted. The RUNBATT1 can be fully charged over 500 times, without decreasing the energy storage capacity. The charging condition of the RUNBATT1 can be verified any time by pressing the key on the front of the device. Charging the iphone 4 with the RUNBATT1
The iphone 4 must be inserted into the RUNBATT1. When inserting the phone, the contacts must be correctly introduced into the iphone 4. Keep the key on the front of the device pressed down (the same key used to verify the charging condition) for 3 seconds, until the iphone 4 recognizes the RUNBATT1. The battery symbol appears on the display and a clicking sound can be heard on the iphone 4. The iphone 4 is now charged. If the RUNBATT1 is used as a docking station while the RUNBATT1 is charged through the USB wall socket or the USB port on the PC and the iphone 4 is inserted into the RUNBATT1, the iphone 4 and the RUNBATT1 are charged at the same time through the USB cable. When using the RUNBATT1 as battery housing, the battery life of the iphone 4 can increase by 80% to 100%, depending on several factors and parameters, which vary with every use.
Setting the RUNBATT1 to stand-by To use the internal rechargeable battery of the iphone 4 first and not that of the RUNBATT1, the RUNBATT1 must be switched off by pressing the key on the front side for 3 seconds. This will extend the battery life. Synchronizing with your PC If you connect the RUNBATT1 to your PC, you can synchronize your iphone 4 directly as if you were synchronizing your iphone 4 with the cable supplied by Apple as default. When you connect the RUNBATT1 to the PC, the iphone 4 makes a clicking sound. The iphone 4 is now being synchronised and charged. Technical features Battery performance: 1700 mah, li-polymer Net weight: 88 g Troubleshooting: RUNBATT1 No charging display Verify the mains voltage or the notebook, etc., USB port, if the output voltage and the output power comply with the requirements. Remove your additional USB cable. Try
connecting your RUNBATT1 USB cable to the power supply or the notebook. Test the battery charging condition of your RUNBATT1 by pressing the ON/OFF key when FULL is displayed. RUNBATT1 does not charge the iphone 4 Ensure that your iphone 4 has been correctly inserted into the RUNBATT1 docking station and that the electrical connection is established. Ensure that the outlet of the RUNBATT1 is set to ON. Press the ON/OFF key to switch the device on or off. The RUNBATT1 does not synchronize the data Check if you are using a wrong additional USB cable between the RUNBATT1 and the notebook. Remove the additional cable. Try connecting the built-in USB cable in the RUNBATT1 to the notebook. Error messages Check whether you are using a wrong additional USB cable. Remove this
on the iphone 4 additional USB cable. Try connecting the built-in RUNBATT1 cable. The device has been tested and complies with the limit values of a digital device class B as per part 15 of the FCC guidelines. CE Declaration of Conformity: This device, including the accessories, has been tested and fulfills the basic and all other EMC conditions. Guideline EN55022:2006 + A1, EN55024:1998+A1+A2, E 60950-1/A11:2004 EN55022:1998+A1:2000+A2:2003, EN55024:1998+A1:2001+A2:2003 iphone 4 is a trademark of Apple inc. and is registered in the USA and other countries. For further information please refer to: www.runtastic.com
Warranty We offer 24 months warranty for this product. The warranty period starts from the date of sale (receipt, proof of purchase). Within this period we repair all defects resulting from material failure or malfunctions free of charge, except: batteries, improper handling, dropping, shock or the like. If you would like to submit a complaint, you have the following options: Please contact your point of sale or send us an e-mail: service@runtastic.com PLEASE NOTE THAT DUE TO ORGANISATIONAL REASONS WE WILL NOT ACCEPT ANY UNANNOUNCED PACKAGES SENT VIA CARRIAGE FORWARD!!!
www.runtastic.com