WRAPPING TECHNOLOGY Stretch Wrapper GL 1300 / GL 1300 CTS Options List V. 1.12
Rights to make any technical modifi cations are reserved. This manual must not be copied or otherwise duplicated. Nor may its content be amended or passed on without our written permission. All rights reserved. Copyright by Cyklop Teknik AB Burseryd 2010 /PBE Rättigheten att göra tekniska ändringar förbehålles. Denna manual får inte kopieras eller på annat sätt dubbleras. Inte heller får dess innehåll ändras eller vidarebefordras utan vårt skriftliga medgivande. Alla rättigheter reserverade. Copyright by Cyklop Teknik AB Burseryd 2010 /PBE 2 SE+EN
Part. No. Description / Benämning Page/Sida GL 1300 standard Basically a GL 300 CU with driven conveyor 4 GL 1300 CTS Complete line with GL 1300 + 5 conveyors + safety net Custom color Custom color for chassis and table Lightbeam, 1 pc Lightbeams, 2 pcs Lightbeams, 3 pcs Sick lightbeam Top plate, rectangular Frequency controlled rectangular top platen Top plate, round Frequency controlled round top platen Extended mast top plate Specify load height when ordering, up to 3000mm Galvanized bottom unit 6 Customized mast height Specify load height when ordering, up to 3000mm Welding unit 6 Point welding unit Cabinet prepared for lightbeams Cabinet prepared with hardware for two sick lightbeams Driven conveyor, 1 pc incl freq control Driven conveyor, 2 pcs incl freq control Driven conveyor, 3 pcs incl freq control Driven conveyor, 4 pcs incl freq control Conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator Pallet guiding discs 4 Guiding discs Net guarding around machine x 1 door Net guarding around machine x 2 doors Guarding for machine & in or out conveyor, incl one door Guarding for machine & in or out conveyor, incl two doors Collision protection for conveyor Protect the conveyor when transport in/out. 8 Air conditioned electrical cab Cooling capacity 640w Active antistatic Passive antistatic Knife Swan 10 pcs Kniv Svan 10 st 9 START KIT STRETCH FILM 9 4 Rolls of high quality stretch fi lm 4 rullar sträck fi lm av hög kvalité 1 Pallet of high quality stretch fi lm (30 rolls) 1 pall med sträck fi lm av hög kvalité 7 3 SE+EN
GL1300 Standard GL 1300 Length Width Total height Max gods weight Transport height Max height of goods Max weight of machine Electrical supply / El: 2880 mm 1675 mm 2790 mm 1500 kg 330 mm 1800 mm 650 kg incl. table conveyor 3 x 400V+N+PE, 1,5 kw, fuse 16A, IP 54 Operating temperature: 5 C (40 F) to 35 C (95 F) GL1300 CTS Complete line with GL 1300 + 5 conveyors + safety net GL 1300 CTS Total length incl. conveyor & collision protection: Total width incl. conveyor & collision protection: Total height (machine) Weight total: (GL 1300 + 4 conveyors + safty net) Transport height Max height of goods Max weight of maskin Electrical supply incl. conveyor 8650 mm 3313 mm 2790 mm Approx. 1800 kg 330 mm 1800 mm 650 kg incl. table conveyor 3 x 400V+N+PE, 2,5 kw, fuse 16A, IP 54 Conveyor L x W 1400 x 900 mm Operating temperature: 5 C (40 F) to 35 C (95 F) 4 SE+EN
Custom colour Other colours on table, frame etc. Colour must be specifi ed when ordering. Lightbeam Sick Safetey application consisting of 1 pair of light beams (sender and receiver) and control unit including 2 light beams. 1. Lightbeam, 1 pc 2. Lightbeam, 2 pc 3. Lightbeam, 3 pc Top plate Top plate, rectangular A foam rubber pad fi tted top plate lowered against the goods in order to increase the stability of the cargo. Rect. top plate works best with EUR-pallets. Dimension: 600x1000 mm Top plate, round A foam rubber pad fi tted top plate lowered against the goods in order to increase the stability of the cargo. Round top plate works best with asymmetric pallet loads. Dimension: Ø700 mm Extended mast top plate Specify load height when ordering, up to 3000 mm 5 SE+EN
Galvanized bottom chassis The following parts are galvanized: - Bottom unit - Turntable incl roller conveyor Customized mast height Specify load height when ordering, up to 3000 mm Welding unit Weld is an option where a welding plate welds the end of the fi lm to the pallet. This option prevents diffi cult loose ends, so-called fi lm fl akes, to appear, in transport and other handling. Cabinet prepared with relays for light beams Model: Sick Only hardware included in cabinet. Light beams are not included. 6 SE+EN
Driven conveyor, incl frequents control Standard conveyor Length Width Max weight of goods Transport height Rollers diameter Electrical supply / El: 1400 mm 950 mm 900 kg 430 mm Ø 80 mm 3 x 230/400, 0,37 kw Driven conveyor, 1 pcs incl frequents control and pallet indicator Driven conveyor, 2 pcs incl frequents control and pallet indicator Driven conveyor, 3 pcs incl frequents control and pallet indicator Driven conveyor, 4 pcs incl frequents control and pallet indicator Pallet guiding discs Pallet control is an option consisting of 4 steel plates mounted on selected rollers on the roller conveyor. Is used to place the pallet in side of the conveyor to secure the cutting function. Also used to facilitate the pallets to prevent them from being moved during fi lming. Rolldiameter: Ø 80 mm 4 pcs Net guarding around machine Guarding for machine & in or out conveyor Option: 1. Net guarding around machine with 1 door 2. Net guarding around machine with 2 door 7 SE+EN
Colliation protection for conveyor Protect pallet conveyor for handling by forklift, in or out transport. Welded steel construction. Air conditioned electrical cabinet Cooling capacity 640W Mounted on the cabinet door. Active antistatic Reduces activte static electricity. The active antistatic with ionizing bar generates a balanced stream of positive and negative ions to neutralize surface static charges. Machine do not fi t in ATEX enviroment. Passive antistatic Reduces passively static electricity. The antistatic brush has a large number of highly conductive fi bres. The fi ne tips of the fi bres concentrate the electric fi eld of the static charge and ionise the air. Machine do not fi t in ATEX enviroment. 8 SE+EN
10 Pcs of Swan knife Knife Swan. Easy to handle. Protect the goods from scratches from the knife. Kniv Svan. Lätt att hantera. Skyddar gods från repor av kniven. START KIT STRETCH FILM 4 Rolls of high quality stretch film 4 rolls of high quality stretch fi lm 4 rullar sträck fi lm av hög kvalité 1 Pallet of high quality stretch film 1 pallet (30 rolls) of high quality stretch fi lm 1 pall (30 rullar) med sträck fi lm av hög kvalité 9 SE+EN
We focus on the things that matters! CYKLOP Teknik AB Villstadsvägen 1 330 26 BURSERYD SWEDEN Tel: +46 371-508 00 Fax:+46 371-50 775 E-mail: info@cyklopteknik.se www.cyklopteknik.se