Near Miss Reporting. Loss Causation Model

Similar documents
Accidents/Incidents are Preventable

How To Prevent Accidents At Work

DON T BET YOUR LIFE ON UNSAFE ACTS

Incident Investigation Process and Exercise

ACCIDENT INVESTIGATION (ROOT CAUSE ANALYSIS)

ACCIDENT/INCIDENT REPORTING AND INVESTIGATION PROCEDURE

E3902 Seeing Accidents Before They Happen Leader s Guide

Accident Investigation Report Human Resources

MD 52 WASTE MANAGEMENT AUTHORITY CORPORATE HEALTH AND SAFETY PROGRAM

Accident Investigation Basics

Rutherford County Workplace Injuries and Safety

Injury or accident report

WEEKLY SAFETY MEETING All Euramax Subsidiaries ACCIDENT REPORTING. Safety Meeting Contents. Meeting Notice. Leaders Guide.

New Perspectives on Accident/Incident Investigation

Safe Driver. Information Sheet

SAFETY in the work area is a broad topic because of the

Mechanical Engineering

Investigating Accidents. How to find out what really happened.

Safety? We have an APP for that!

FALL FACTORS: Understanding & Preventing Slips, Trips & Falls

Entry Level Award in Workplace Hazard Awareness

Risk management a practical approach

Motor Vehicle Fatalities Accepted by the Workers Compensation Board

IOSH Working Safely MODULE 2: DEFINING HAZARD AND RISK. (Material correct Autumn 2013)

DEFENSIVE DRIVING. It s an Attitude

Oil and Gas Industry. Present. Presenter Connie Brown Assistant Area Director Charleston Area Office

FMCSA Webinar Nov.18th to Examine Large Truck Crash Fatalities Involving Pedestrians & Bicyclists. New Technology for Better Fleet Management

CHARACTERISTIC DATA ANALYSIS OF OCCUPATIONAL ACCIDENT IN HEAVY ENGINEERING INDUSTRY

Incident Reporting & Investigation

working surface can be a potential fall hazard.

U.S. Firefighters Killed when Struck by Vehicles,

Hazard Management Tool

Defensive Driving While Towing a Trailer By Elizabeth Koncki, Maryland Department of Agriculture

Young Workers Health & Safety Workshop

Using contractors. A brief guide. Your responsibilities. What you need to do

Private Transport Working Conditions Checklist 1

Slips, Trips and Falls Prevention

Videos for Safety Meetings

An accident is an unplanned and unwelcome event which disrupts normal routine.

Bicycle Riding. WHAT ARE the. One Final Note... It is against the law to ride a bicycle under the influence of alcohol and/or drugs. (21200.

CAR DAILY VEHICLE PRE CHECKS INFORMATION. Page 1 of 6

Risk Assessment Tool (example only)

Life Saving Rules. Working Safely at EPCOR

ACCIDENT / INCIDENT INVESTIGATION REPORT INSTRUCTIONS

Six steps to Occupational Health and Safety

OCCUPATIONAL HEALTH AND SAFETY Global Policy

Health & Safety at Work

Employee s Report of Injury Form

EQUIPMENT SAFETY EARTHMOVING MATERIAL HANDLING NAVFAC MIDLANT

Working safely under motor vehicles being repaired

Road safety a work-environment issue

Policy: Accident & Injury Reporting Category: Operations. Authorized by: Joan Arruda, CEO

When lifting and carrying weight, do these things:

Five steps to risk assessment

Accident Investigation Report

You ve. life. ahead. you... So, safe. the of. job!

Example risk assessment for a motor vehicle mechanical repair workshop

Building and Construction

Student Shop Safety Policy GS92 Page 1

Completion Test Answer Key. 1. Why are young people more likely to be injured on the job than other groups of workers?

Material 1. Dolly, hand cart, wheel cart, large box, back belt

Hazard Management Tool

INCIDENT/ACCIDENT/INJURY REPORTING AND INVESTIGATION

Tips for Safer Driving

RISK MANAGEMENT AND THE THE RISK ASSESSMENT METHOD STFC TRAINING MANUAL

Sample only. STOP for Each Other. Unit 1: Introduction SAFETY TRAINING OBSERVATION PROGRAM. Name:

HISTORY OF FATAL ACCIDENTS ON ROADWAYS IN THE CITY OF BERKELEY

How to investigate an Accident and Incident.

POTENTIAL HEALTH & SAFETY HAZARDS

WHS Induction Series. 36 Toolbox Talks. Contents

Five steps to risk assessment

Atlanta, Georgia Road Test

[Project name] Standard Operating Procedures. Body Mechanics

How to Manage Hazards

Injury Prevention for the Transportation and Warehouse Industry

A Guide to Accident Investigations

EMPLOYEE FALL PROTECTION

North Dakota State University Slips, Trips, & Falls Program

Level 1 Award in Health and Safety in a Construction Environment

Workplace Incident Fatalities Accepted by the Workers Compensation Board in 2014

Guidance notes for completing a detailed manual handling risk assessment

Forklift Carts and Dollies

OCCUPATIONAL HEALTH AND SAFETY RISK ASSESSMENT PROGRAM FOR AGRICULTURE

Operating instructions. 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline

THERE S NO EXCUSE FOR UNSAFE ACTS

Tech Shop Safety Level 2 - FN Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)

EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP

Skanska Sweden s General Conduct and Safety Rules. Content

City of Elkins Motor Vehicle Policy Adopted by Elkins City Council October 22, 2015 Revised:

Accident, Injury & Illness Program Training

MODERN DRIVING HAZARDS: ROAD RAGE, CELL PHONES & OTHER DANGERS

Construction OS&H Working at height

Transportation and Lifting of Liquefied Gas Dewars

HIGH-IMPACT FORKLIFT OPERATOR TRAINING

Transcription:

Near Miss Reporting Loss Causation Model

Define what is a near miss Defined so everyone is on the same page. Practical reporting How do we apply this and make it work? Objective

Accident An unplanned event where injury to people, damage to property or process or harm to the environment has occurred. What is an Accident?

Near Miss A near miss is an unplanned event that did not result in injury, illness, or damage - but had the potential to do so. Only a fortunate break in the chain of events prevented an injury, fatality or damage. What is an Near Miss?

What is a Near Miss? There are many ways to describe a near miss, close call, or near hit. Definition: A near miss can be describe as an unplanned event where given slightly different circumstances, injury to people, damage to property or process or harm to the environment could occurred. All Near Misses involve people and some type of action. What is a Near Miss?

What is a Near Miss? Unsafe actions of people which in different circumstances could cause an accident, property damage, process interruption or create an environmental hazard. Pre-shift work place examinations are designed to look for unsafe conditions in the work area. These are corrected before work begins. Unsafe actions are observations to correct the sometimes unthinking acts that we commit. What is a Near Miss?

Is this an Unsafe Act or an Unsafe Condition? What is taking place to make this an unsafe act? What would we change to make this just an Unsafe Condition? Is this a Near Miss? Unsafe Acts & Unsafe Conditions

Is this an Unsafe Act or an Unsafe Condition? What is taking place to make this an unsafe condition? What would we change to make this an unsafe act? Is this a Near Miss? Unsafe Acts & Unsafe Conditions

Serious or Disabling Injury The event which ultimately results in a loss, has usually occurred many times previously. However, because no loss was experienced it was normally left uninvestigated. Reporting a near miss or a close call can provide ways for people to understand how an accident could have happened and how to prevent an accident in the future with out anyone getting hurt. Unsafe Acts / Unsafe Conditions Near Miss

This is the base of the pyramid. There is no contact or energy exchange. These acts and conditions are present everywhere. Example: Walking around the shop area with out wearing a hard hat. An old work truck that you have to double pump the brakes. Unsafe Acts / Unsafe Conditions Unsafe Acts / Unsafe Conditions

These requires some type of energy exchange. There is no contact with the individual or machinery. Example: Mechanic drops heavy wrench from atop haul truck to the shop floor. Near Misses You need double pump the brakes to stop at the Mini Mart. Unsafe Acts / Unsafe Conditions Near Misses

This begins the exchange of energy between the object and the person or machine. Contact is made but no loss occurs because the severity is determined by luck. Incidents Near Misses Unsafe Acts / Unsafe Conditions Example: Mechanic drops heavy wrench from atop haul truck to the shop floor and bounces and strikes a person s steel toe boot. You double pump the brakes to stop at the house and end up bonking your mother-in law s car in the bumper. Incidents

Property damage accidents are costly. Loss of process are typical examples of this type of accident. These can in the long run cost more than serious injuries. Property Damage Incidents Near Misses Unsafe Acts / Unsafe Conditions Example: Mechanic drops heavy wrench from atop haul truck to the shop floor and strikes a pick-ups windshield and cracks it from end to end. You double pump the brakes to stop at the post office and end up hitting a yellow post putting another dent in the bumper. Property Damage

Minor Injuries Property Damage Incidents Near Misses Unsafe Acts / Unsafe Conditions Is this a Near Miss? These are any reported injuries that may or may not be serious in nature. These are first aid cases. Many times these are rationalized as near-misses or close calls, but are really in fact minor injuries. Example: Mechanic drops heavy wrench from atop haul truck to the shop floor and striking an employee on the arm cutting him slightly. The brakes unexpectedly grab the first time and you hit your chin on the steering wheel. Minor Injuries

Serious or Disabling Injury Minor Injuries Property Damage Incidents Near Misses Unsafe Acts / Unsafe Conditions This is the top of the pyramid. The serious injury is given the most attention to insure that it does not happen again. Example: Mechanic drops heavy wrench from atop haul truck to the shop floor and strikes a co-worker on the shoulder, causing permanent disability. This time the brakes do not work at all as you roll into fast moving traffic at the on coming intersection Serious Injury

Goal Serious or Disabling Injury 1 Learning from what could have happened far outweighs learning from what did happen. Minor Injuries Property Damage Incidents 10 30 600 Requires Management to Focus on Culture Shows you if we are good or just lucky Raises Risk Awareness Near Misses??????? Encourages Involvement Unsafe Acts / Unsafe Conditions Goal Learning From Near Misses

Near misses are infrequent and hard to find anything to report on a monthly basis. False Small - hardly noticeable - property damage is only a near miss and is not a big deal in the big Safety world. False Near misses and injuries can show possible of probable serious injuries if investigated. True Questions

Loss Causation Model Lack of Control Basic Causes Immediate Causes Contact Loss Plan Organize Job Factors Conditions Contact with Energy or Substance Employee Workplace Equipment Lead Control Personal Factors Acts Property All Near Misses involve people and some type of action. Practical Investigation

Contact Contact with Energy or Substance Struck against Struck by Caught in, under or between Fall from same level Fall to lower level Rubbed or abraded Body reaction Electrical energy Overexertion Temperature extremes Toxic / nontoxic substance Caustics / Acid A near miss is an unplanned event that did not result in injury, illness, or damage - but had the potential to do so. I was just standing there minding my own business when all of a sudden out of no where came this big noise!! It was not my fault! I had told them if they did not pay attention this would happen... Contact

Loss Employee Workplace Equipment Property Near Miss Property Damage First aid Injury Industrial Illness Lost Time Injury Death Go back and look at the potential of what could have happened. Describe the near miss and ask what would probably happen if under slightly different circumstances we were not so lucky. This could be to employees, the workplace, equipment or property. loss of process and environmental losses could also be investigated with this process. Lack Lack of of Control Basic Basic Causes Immediate Causes Contact Loss Loss Plan Plan Organize Lead Lead Control Job Job Factors Personal Factors Conditions Acts Acts Contact with with Energy or or Substance Employee Workplace Equipment Property Loss

Immediate Causes Conditions Acts Failure to use available PPE Failure to wear safe personal attire Failure to secure or warn Horseplay Improper use of equipment Improper use of hands/body parts Inattention to surroundings Make/secure safety device(s) ineffective Unsafe speed Taking unsafe position or posture Unsafe placing, mixing, or combining Use of drugs and/or alcohol Operating equipment without authority / training Removing safety devices Using defective equipment Using equipment improperly Improper loading Improper placement Improper lifting Servicing equipment in operation Horseplay Not following procedures The immediate causes of accidents are the circumstances that immediately go before the contact. These are usually the most obvious in an accident investigation. Lack Lack of of Control Plan Plan Organize Lead Lead Control Basic Basic Causes Job Job Factors Personal Factors Immediate Causes Conditions Acts Acts Contact Contact with with Energy or or Substance Loss Loss Employee Workplace Equipment Property Immediate Causes

Basic Causes Job Factors Personal Factors Improper motivation Inadequate planning Lack of knowledge Lack of skill Physical or mental problems Willful deviation Inadequate capability Stress When basic causes are identified, meaningful management controls can be put into place. Basic causes are not easily recognized and the root causes of an accident. This is the reason we make the effort to have an adequate investigation. Lack Lack of of Control Basic Basic Causes Immediate Causes Contact Loss Loss Plan Plan Organize Lead Lead Control Job Job Factors Personal Factors Conditions Acts Acts Contact with with Energy or or Substance Employee Workplace Equipment Property Basic Causes

Lack of Control Plan Organize Lead Control Plan Organize Lead Control Plan, Organize, Lead and Control Effective health and safety management is not common sense but is based on a common understanding of risks and how to control them brought about through good management. (HSE, 1991) Who - What - When Lack Lack of of Control Basic Basic Causes Immediate Causes Contact Loss Loss Plan Plan Organize Lead Lead Control Job Job Factors Personal Factors Conditions Acts Acts Contact with with Energy or or Substance Employee Workplace Equipment Property Lack of Control

With enough reports we can begin to look for trends. Potential Contact Struck by Unsafe Acts Using equipment improperly Personal Factors Caught between Not following procedures Inadequate planning We can spend our time and efforts where the problems are. (20/80) Then What?

Last Chance Lack of Control Basic Causes Immediate Causes Contact Loss Plan Organize Job Factors Conditions Contact with Energy or Substance Employee Workplace Equipment Lead Control Personal Factors Acts Property Why? Loss Causation Model

Electricians working on a pump were using a screwdriver as a pry bar. Loss Contact Acts Personal Factors Lack of Controls Practical Reporting

Welder was welding and did not have welding screens to protect people walking and driving past from arc flash. Loss Contact Acts Personal Factors Lack of Controls Practical Reporting

Boom truck was parked at the shop with no wheel chocks. I had to go and chock the truck for them, again!????? Not a near miss, Conditions Practical Reporting

Driver backed through low berm and almost went over the dump. Loss Contact Acts Personal Factors Lack of Controls Practical Reporting

Operator after loading dozer was going down a steep haul road. When he stopped at the bottom the dozer slid and fell off the trailer.????? Not a near miss, Property Damage Practical Reporting

Mechanic standing on edge of truck with greasy boots pulling on stuck air cleaner. Loss Contact Acts Personal Factors Lack of Controls

Define what is a near miss Near miss requires action and people. Near the bottom of the pyramid. Pro-active Can provide warnings of things to come. Based on luck. Practical reporting Use the Loss Causation Model Ask Why? Look for Basic Causes Place controls to manage Basic Causes Conclusion