PIV Pr üfinstitut Schlösser und Beschläge Velbert Wallstraße 41 D-42551 Velbert Tel. +49 (0) 2051-9506-5 Fax +49 (0) 2051-9506-69 Test report No. 20-20/06 1. Client and manufacturer DIRAK GmbH&Co.KG 58256 Ennepetal 2. Name of test item Variant 1 Dual cylinder swing handle plastic PA6 Variant 2 Dual cylinder swing handle GDzN ZL0430 3. Test order / Test basis Test tool attack analogous to DIN V ENV 1630:1999-04, WK 2 on their dual cylinder swing handle ( variants 1 and 2) mounted on a sheet metal cabinet housing 4. Test result The test item variant 1 does not meet the requirements of the test order. The test item variant 2 meets the requirements of the test order. Details of the test can be found in the Appendix. 5. Test date 10 April 2006 6. Place of testing PIV Prüfinstitut Schlösser und Beschläge Velbert 7. Date of test report 11. April 2006 8. Scope of test report 1 cover sheet 5 pages of enclosures and drawings 9. Additional terms for this test report 1. Our terms of business apply 2. The test results only relate to the tested test item (no. 2) 3. The test report may not be changed and only published in its entirety. 10. Signature R. Ehle PIV is an Accredited test centre according to DIN EN ISO/IEC17025 Accredited certification office according to DIN EN 45011 (PIV CERT) Monitoring and certification office according to State Building Regulations (LBO) Test, monitoring and certification office according to building products law (BauPG) RAL test centre for locks and fittings according to RAL-RG 607/ff BAU-BG test centre for DIN 4422 (travelling gear rollers) DIN CERTCO recognised test centre Director of the Test Institute: R. Ehle
Page 2 of 6 Test report Test report no.: 20-20/06 Test date: 10.04.2006 a. Client DIRAK GmbH & Co. KG 58256 Ennepetal b. Product name acc. to manufacturer's information Variant 1 Dual cylinder swing handle plastic PA6 Variant 2 Dual cylinder swing handle GDzN ZL0430 b.1. Dimensions of cabinet housing Width 590 mm Material / Thickness 2 mm Height 1180 c. Submitted drawings Variant 1 107-8732.00-00000 Variant 1 207-8259.00-00000 Variant 1 207-1401.07-07101 Variant 2 207-8264.00-00000 Variant 2 207-8260.00-00002 Variant 2 107-8734.00-00001 Variant 2 107-8734.00-00000 c.1. Reference sample no d. Test order The firm of DIRAK commissioned PIV to perform a manual tool attack analogous to DIN V ENV 1630:1999-04 with the tool sets and tool contact time of resistance class 2 (WK 2) on their dual cylinder swing handle ( variants 1 and 2) mounted on a sheet metal cabinet housing d.1. Tool contact times acc. to WK2 d.1.2 Main test 3 minutes d.1.3 Total test time 15 minutes e. Testing device Tool set A and additional tool set acc. to DIN V ENV 1630 WK2 e.1 Photo documentation yes / see Figs. 1-6 e.1.1 Video documentation no f. Attack side (variant 1) Outside / see Fig. 1 f.1 Attack side (variant 2) Outside / see Fig. 4 g. Test result see Appendix
Page 3 of 6 Components used Handle ( variant 1) Description Dual cylinder swing handle plastic PA6 Manufacturer DIRAK Drawing 107-8732.00-00000 Number 1 Handle ( variant 2) Description Dual cylinder swing handle GDzN ZL0430 Manufacturer DIRAK Drawing 207-8264.00-00000 Number 1 Profile cylinder Description 851 ½ Manufacturer C.Ed. Schulte GmbH Drawing --- Number 2 Comment Profile cylinder DIN 18252 Class P2-BZ Cabinet Description Manufacturer Drawing Number Switch cabinet Rittal --- 1
Page 4 of 6 Requirements and results Test performed analogous to DIN V ENV 1630 WK2 Manual tool attack 1. Manual tool attack: target 3 minutes Variant 1 1.1 Resistance time for main test WK 2 =3 minutes Total test time max. 15 minutes 1.2 Attack area Dual cylinder swing handle plastic PA6 Total test time = 2.38 minutes after 3 minutes passable hole. Comment: The handle was overcome after 1.44 minutes. Variant 2 2.1 Resistance time for main test WK 2 =3 minutes Total test time max. 15 minutes Total test time = 4.41 minutes 2.2 Attack area Dual cylinder swing handle GDzN ZL0430 After 3 minutes no passable hole.
Page 5 of 6 Photos Variant 1 (plastic PA6) Fig. 1 Fig. 2 before the main attack Fig. 3 after the main attack Variant 2 (GDzN ZL0430)
Page 6 of 6 Fig. 4 Fig. 5 before the main attack Fig. 6 after the main attack Overall assessment The tested components fulfill the requirements of the test order as follows: Variant 1 Dual cylinder swing handle plastic PA6 Test not OK. Variant 2 Dual cylinder swing handle GDzN ZL0430 Test OK. Date: 10.04.2006 Test engineer: Holz / Lechte Persons attending the test for the client Mr. Koch 42551 Velbert, 11 April 2006