Campbell Chain Founded in 99, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working load capacities including proof coil, high test, transport and alloy; finishes including self-colored, Blu-Krome, galvanized and bright color polycoated; links that are short, long, twisted, locked, looped, even stamped from flat stock. Several chain types are even available in solid brass and bronze. Campbell chains and assemblies, including slings for overhead lifting, and binder chains, have earned for the manufacturer an outstanding reputation for quality. The Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 900. Contents Accessories, plastic Cable Camtrol comparison system Chain, aluminum Chain, animal Chain, ball Chain, BBB Chain, binder Chain, cam-alloy Chain, cathedral Chain, clock Chain, coil Chain, construction Chain, decorator Chain, dock fender Chain, fishing Chain, high test Chain, hobby/craft Chain, jack Chain, log Chain, loop Chain, machine Chain, marine Chain, mooring Chain, oval link Chain, passing link Chain, plastic Chain, proof coil Chain, safety Chain, sash Chain, stainless steel Chain, tow Chain, transport Contents Chain, tuna Chain, twist Chain, utility Chain, well Chain, winch line Cutters, chain and cable Leads, anchor Sizing chart Click on the section you want
Camtrol System Campbell s CAMTROL SYSTEM makes chain products easier to identify and understand. That s because all are based on engineering formulas computed according to ISO (International Organization for Standardization), NACM (National Association of Chain Manufacturers) and ASTM (American Society for Testing and Materials). Use the CAMTROL SYSTEM to make wise chain purchasing decisions. Use it to compare the various categories of chain, to choose the right chain for the job according to the price per thousand pounds of working load instead of buying on a price per foot. Consult your Campbell Chain distributor for current prices. Then refer to the chart below and divide the price per foot by the working load limit (in thousands of pounds) shown in the table. By using this comparison system you will discover that you can buy a smaller, easier to handle chain, and at less cost based on its working load limit. Variations in finish or heat treatment The mechanical properties shown on the Camtrol Chart apply only to the various chains in their standard finish and heat treated condition. Finishes such as galvanizing or electroplating may reduce strengths. The manufacturer s revised recommendations should be solicited when such treatments are desirable for specific applications. Hallmarking (Identification) All System 4, 7, 8, and 0 chains and all System chains /6 (8 mm) and larger are marked with the grade identifier approximately every 2 or less. Please refer to the chain type of interest in this catalog for the specific hallmarks. Nominal Dimensions Camtrol Weight Per Working Load System Trade Size Diameter Inside Length Inside Width 00 Feet Limit Grade Number in. mm in. mm in. mm in. mm lb kg lb kg 0 /8 4.6 4.0.89 22.6.29 7. 22 0 400 80 0 /6..20..9 24..4 8.6 6 800 6 0 /4 7.260 7.0.20 0.0.4.40 6 2,00 80 0 /6 8.2 8.0.27 2.27.47.9 8 8,900 860 0 /8 0.69 0.0.6 4.46.7 4.47 2 7 2,60,200 0 /2.2.0.70 4.8.7 9.00 27 08 4,00 2,00 0 /8 6.66 6.7 2.0.4.87 22.09 90 77 6,900,0 0 /4 20.78 9.8 2.70 68.8.02 26.00 24 0,600 4,80 0 7/8 22.906 2.0 2.4 9.44.7 4.80 770 49 2,800,80 4 4 /4 7.276 7.0.20 0.0.4.40 6 28 2,600,80 4 4 /6 8.4 8.7.27 2.27.47.94 02 46,900,770 4 4 /8 0.94 0.0. 29.2.8 4.7 60 7,400 2,40 4 4 7/6.9.468.9.29 2.77.67 7.02 26 98 7,200,270 4 4 /2..0.70 4.8.7 9.00 260 8 9,200 4,70 4 4 /8 6.66 6.7.94 49.27.9 2.62 6 6,00,220 4 4 /4 20.78 2.0 2.2 6..0 27.94 24 6,200 7,0 70 7 /4 7.2 7.9.94 2.88.46.68 9 4,0,40 70 7 /6 8.7.4 8.7.0 2.6.48.68 0 4,700 2,0 70 7 /8 0.406 0.6 4.46.7 4.47 0 68 6,600 2,990 70 7 7/6.9.468.9.29 2.77.67 7.02 22 96 8,70,970 70 7 /2..0.70 4.8.7 9.00 260 8,00,0 70 7 /8 6.60 6.0.9 49.02.87 22.0 7 70,800 7,70 80 8 7/2..28..69 7..0 7.62 4 20 2,00 970 80 8 /6 8. 8.0.94 2.88.46.68 92 42 4,00 2,000 80 8 26.000 2.4 2.80 7.2.40.6 96 48 47,700 2,600 80 8 /4 2.20.8.0 88.90.7 44.4 2 692 72,00 2,800 6 6 /2 8.00 8. 4.49 4.04.94 49.27 240 97 80,000 6,400 00 0 9/2 7.28 7.2.86 2.80.4.40 74 4 4,00,90 00 0 /8 0.402 0.2.22.00. 4.00 48 67 8,800,990 00 0 /2.22.2.4 9.90.4 9.0 20,000 6,800 00 0 /8 6.64 6..9 49.00.87 22.0 79 72 22,600 0,20 00 0 /4 20.802 20.4 2.42 6.0.09 27.70 98 27,00 6,000 00 0 7/8 22.882 22.4 2.70 68.2.28 2.48 77 42,700 9,400
Important Chain Terms WORKING LOAD LIMIT The working load limit (rated capacity) is the maximum combined static and dynamic load in pounds or kilograms which should ever be applied to the product in service, even when the product is new, and when the load is uniformly applied in direct tension to the product. PROOF TEST The proof test is a quality control test applied to chain for the purpose of verifying weld and material quality. It is the minimum force in pounds or newtons that the chain has withstood in direct tension as part of the manufacturing process. Proof testing assures that the chain is more than capable of performing at its rated working load limit. Proof test loads are a manufacturing integrity test and shall not be used as criteria for service or design purposes. All Campbell proof tested chain and components are proof tested in accordance with the applicable ASTM, NACM and AISI/ASME requirements. Warnings, Cautions, Inspection and Proper Use of Chain Campbell chain products and components are designed and built for rugged lasting service. As with any quality product certain precautions and standards of treatment should be observed. Proper care will extend the useful life of the product. INSTRUCTIONS REGARDING COMPONENTS AND FITTINGS Components, such as hooks or shackles, should have at least the same working load limit (rated capacity) as the chain with which they are used. If not, the assembly shall be rated to the capacity of the weakest component. Campbell offers a full line of components engineered specifically to be compatible with our chain products. S AND CAUTIONS The use of chain is subject to certain hazards that cannot be met by mechanical or manufacturing means, but only by the exercise of intelligence, care, and common sense Do not exceed the working load limit of the chain or any component Chemically active environments may adversely affect chain and components. Do not use in highly acidic or caustic environments. Campbell should be contacted if the chain will be exposed to chemically active environments during use High and low temperatures will affect chain and components. Campbell should be contacted if temperatures below -20 F (-29 C) or above 400 F (200 C) will be experienced Chains used in certain applications are subject to governmental regulations. Please follow all Federal, State and/or Local Department of Transportation, OSHA, or other applicable standards and regulations when using Campbell products Never field weld or repair chain See other specific information under "Inspection and Proper Use" sections INSPECTION Regular inspections should be conducted on chain to detect damage or deterioration from use. The chain should be inpected for any of the below conditions. If present, the chain should immediately be removed from service. Cracks in the chain or any component Excessive nicks or gouges Excessive wear. Chain should be removed from service if the thickness at any point on the link is below the value shown in the Chain Minimum Allowable Thickness chart. All other components should be removed from service if any dimension is worn by more than 0% from the original dimension Stretched, bent, twisted, or distorted chain links or components Excessive corrosion Evidence of heat damage Evidence of field welding or weld splatter Any other condition which questions the integrity of the chain The hooks or other components should be of a size to fit the intended connections Avoid shock loading Pad all sharp edges or corners in contact with the chain Rig so that the load is properly seated in the hooks or other components. Avoid tip loading of hooks and side loadingof chain and components Avoid twisting or kinking the chain Never knot chain Purchasers please note that all Warnings and Cautions apply to chain as well as all components and fittings. Purchasers are responsible for conveying the Warnings and Cautions, including the "Inspection" and "Proper Use" section information to the end user. Campbell denies any liability for damage that results from use in excess of the working load limit or any abuse or misuse of the product. Any questions concerning the use of Campbell products may be directed to your CooperTools Sales representative or CooperTools Customer Service representative. OTHER PRODUCTS Campbell produces a number of products for specialty applications. Please contact your Cooper Sales representative, or Customer Service representative, if you have special requirements. Not all products produced by Campbell appear in this catalog. Campbell can produce engineered chain to meet customer design specifications, and also produces a variety of chain assemblies. Minimum order quantities may apply to special order products. NOTICE: The product specifications and dimensions are as accurate as possible at the time of printing. However, because we are continually improving the quality and design of our products, they can change without notice. The dimensions and weights are approximate nominal values, and some variation will occur. If specific dimensional requirements are necessary for the application, please contact your CooperTools Sales representative, or Customer Service representative. PROPER USE To protect the users and to prevent damage to the chain, the following safe practices should be followed: Select a chain suitable for the application and environment
Care and Maintenance of Chain Minimum Allowable Thickness Chart Nominal Min. Allowable Trade Size Chain Type Material Diamter Thickness on Link in. mm or Grade in. mm in. mm 4.0 Machine, Coil 0.20.0 0.04 2.64.4 Machine, Coil 0..4 0.7 2.97 2.8 Machine, Coil 0.48.8 0.28.2 4. Machine, Coil 0.62 4. 0.40.6 /0 4. Machine, Coil 0.77 4. 0..89 2/0 4.9 Machine, Coil, Passing Link 0.92 4.9 0.66 4.22 /0. Machine, Coil 0.207. 0.79 4. 4/0. Machine, Coil, Passing Link 0.28. 0.89 4.80 /0 6.4 Machine, Coil 0.20 6.4 0.27.0 /8 4.0 Grade 0 0.6 4.0 0..4 /6. Grade 0, 80, 00 0.27. 0.89 4.80 /4-9/2 7.0 Grade 0, 4, 70, 80, 00 (Grade 4 = 0.28) 0.276 7.0 0.29 6.07 /6 8.4 Grade 0 0. 8.4 0.286 7.28 /6 8.7 Grade 4, 70 0.4 8.7 0.297 7.4 /6 8.0 Grade 80, 00 0.2 8.0 0.27 6.9 /8 0.0 Grade 0, 80, 00 0.94 0.0 0.42 8.69 /8 0. Grade 4, 70 0.406 0. 0. 8.9 7/6.9 Grade 0, 4, 70 0.468.9 0.40 0.0 /2.0 Grade 0, 80, 00 0.2.0 0.44.26 /2. Grade 4, 70 0.. 0.460.68 /8 6.0 Grade 0, 4, 70 0.60 6.0 0.46.87 /4 20.0 Grade 80, 00 0.787 20.0 0.687 7.4 7/8 20.0 Grade 0, 4, 80, 00 0.866 22.0 0.70 9.0 26.0 Grade 0, 80.020 26.0 0.887 22. -/4 2.0 Grade 80.260 2.0.09 27.7 -/2 8.0 Grade 6.00 8.0.00 2.99 Warning: Remove chain from service if the thickness is less than the minimum shown, at any location on the link Finish Abbreviations (S.C.) stands for Self Colored. A finish without any cleaning operations to remove oil or dirt or surface oxidation from the welding process (BRT) stands for Bright. A finish where the surface is cleaned by shot peening or tumbling to produce a clean bright surface (B.K.) stands for Blu-Krome, a registered trade name for Campbell s method of zinc electroplating with a tinted blue chromate finish. The zinc electroplating is an attractive finish that also serves to prevent the onset of rust on the chain. The chromate finish serves to protect the zinc electroplate (Y.C.) stands for Yellow Chromate, a name for Campbell s method of zinc electroplating with a yellow chromate finish. The zinc electroplating is an attractive finish that also serves to prevent the onset of rust on the chain. The chromate finish serves to protect the zinc electroplate (GALV) stands for Hot-dip Galvanized. Hot-dip galvanizing is a process where the chain is immersed in molton zinc. This produces both a chemical reaction between the steel and the zinc, as well as an outside layer of zinc on the chain. The end result is an adherent coating of zinc that is much thicker than that produced by zinc electroplating. Corrosion resistance is proportional to zinc thickness, and therefore galvanized products offer superior corrosion resistance to electroplated products. Note: Due to the temperature of the molten zinc, the strengths of hot-dip galvanized products are often reduced by % (M-GALV) stands for Mechanically Galvanized. Mechanical galvanizing is a process where zinc powder is mechanically applied to the outside of the chain. Because this is a mechanical process and not a molten process, the coating is very uniform (Polycoated) is a finish where the chain is coated with a colored plastic powder which is then fused onto each link
System, Proof Coil Chain (Grade 0) Uses: Excellent general-purpose chain of standard commercial quality Frequently used for fabricating tow chains, binding or tie down chains and logging chains Standard Material: Low carbon steel Standard Finish: Self Colored (S.C.) or Galvanized (GALV); also available Blu-Krome (B.K.) /6" through /2" and polycoated Drums Half Drums Pails, including Anchor Lead SquarePails Reels Hallmarking: C or M on /6" (8mm) and larger Proof tested Packaging: Drums and half drums (order unit is feet ), pails and refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Drums, System, Proof Coil Chain (Order Unit is "Feet") Trade Mat. Inside Dimensions Self Colored Blu-Krome Galvanized Working Length/ Size Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit ft. per Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg drum 00' ft. 8 4.6 4.89 2.29 7 020202 0692 -- -- 02022 06949 400 80 000 22. 6 6.2 6.9 24.4 9 02002 06970 02022 07007 0202 0704 800 6 000 2.6 4 7.26 7.20 0.4 020402 07076 020422 0706 02042 0744 00 80 800 6 0.0 6 8. 8.27 2.47 2 02002 0720 02022 0724 0202 0728 900 860 0 8 9.4 8 0.7 0.6.7 4 020602 07 020622 077 02062 0740 260 200 400 2 8.8 7 6 2.47 2.7.7 9 020702 0744 -- -- 02072 07489 700 680 00 20 8.8 2..70 4.7 9 020802 0702 020822 0726 02082 077 400 200 200 28 7. 8 6.66 7 2.0.87 22 02002 079 -- -- 0202 0768 6900 0 0 90.7 4 20.78 20 2.70 69.02 26 02202 0762 -- -- 0222 0766 0,600 4800 00 6 4.4 7 8", " and 4 " available upon request. The last digit of the catalog number changes to a if a non-standard quantity is ordered. Half Drums, System, Proof Coil Chain (Order Unit is "Feet") Trade Mat. Inside Dimensions Self Colored Blu-Krome Galvanized Working Ft. per Size Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit Half Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg drum 00' ft. 6 6.2 6.9 24.4 9 02000 0696 -- -- 0200 0702 800 6 00 2.6 4 7.26 7.20 0.4 020400 0702 -- -- 02040 0720 00 80 400 6 0.0 6 8. 8.27 2.47 2 02000 0782 -- -- 0200 07267 900 860 27 8 9.4 8 0.7 0.6.7 4 020600 07 -- -- 02060 0797 260 200 200 2 8.8
Round Pails, System, Proof Coil Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Self Colored Blu-Krome Galvanized Working Size Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit Ft. per Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg pail pail ft. 6 6.2 6.9 24.4 9 -- -- 0402 0799 040 08004 800 6 20 88 2.6 4 7.26 7.20 0.4 -- -- 04042 08028 0404 080 00 80 4 79 0.0 6 8. 8.27 2.47 2 -- -- 0402 0809 040 08066 900 860 92 76 9.4 8 0.7 0.6.7 4 -- -- 04062 08080 0406 08097 260 200 6 79 8.8 2..70 4.7 9 -- -- 04082 080 -- -- 400 200 40 9 7. Approximate. Round Pails, Anchor lead, System, Proof Coil Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Galvanized & PolyCoated ** Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg pail pail ft. 4 7.26 7.20 0.4 02009 644 00 80 4 79 0.0 ** White polycoated. Approximate. Square Pails, System, Proof Coil Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Self Colored Blu-Krome Galvanized Working Size Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg pail pail ft. 8 4.6 4.89 2.29 7 -- -- 04226 9060 -- -- 400 80 200 44. 8 4.6 4.89 2.29 7 -- -- -- -- 0426 8926 400 80 2 72. 6 6.2 6.9 24.4 9 046 90667 0426 808 046 806 800 6 0 2.6 4 7.26 7.20 0.4 0446 90674 04426 8072 0446 8089 00 80 00 6 0.0 6 8. 8.27 2.47 2 046 9068 0426 8096 046 802 900 860 7 62 9.4 8 0.7 0.6.7 4 0466 90698 04626 89 0466 826 260 200 4 6 8.8 Approximate.
Square Pails, System, Proof Coil Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Polycoated ** Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg pail pail ft. 6 8. 8.27 2.47 2 HV04226 87940 900 860 7 62 9.4 ** Hi-visibility orange polycoated. Approximate. Square Pails, Anchor lead, System, Proof Coil Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Galvanized & PolyCoated ** Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg pail pail ft. 6 8. 8.27 2.47 2 02006 888 900 860 7 62 9.4 ** White polycoated. Approximate. Reels, System, Proof Coil Chain (Order Unit is "Each Reel") Trade Mat. Inside Dimensions Blu-Krome Polycoated Yellow Working Reel Size Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Width in. mm in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel in. 6 6.2 6.9 24.4 9 072027 064982 PD072027 84642 800 6 00 0.7 4 7.26 7.20 0.4 072227 8270 -- -- 00 80 6 6 0.7 4 7.26 7.20 0.4 -- -- PD072227 89 00 80 60 6 0.7 6 8. 8.27 2.47 2 0722227 8287 -- -- 900 860 60 0 0.7 8 0.7 0.6.7 4 072227 8294 -- -- 260 200 44 0.7
Drums, Marine, Proof Coil Chain (Order Unit is "Feet") An excellent low-carbon steel chain made with a shorter length than standard proof coil Packaging: Drums (order unit is feet ) Standard finish: Self-colored (S.C.) or Hot Dipped Galvanized (GALV) Proof tested Drums Trade Mat. Inside Dimensions Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot Hot Dipped Galvanized 4 7.28 7.00 2.0 0282 7064 00 90 800 42 7.6 6 8.4 9.0 28.0 02822 7062 900 862 0 6.7 8 0.4 0.2.62 6 0282 70669 260 202 400 66.9 2..0 8.8 2 02842 70676 400 204 200 286 4.7 8 6.66 6.84 47.99 2 0282 7068 6900 0 0 4 6. Self-colored 4 7.28 7.00 2.0 02802 82969 00 90 800 42 7.6 6 8.4 9.0 28.0 028202 82976 900 862 0 6.7 8 0.4 0.2.62 6 02802 8298 260 202 400 66.9 Drums, Mooring Chain (Order Unit is "Feet") An excellent low-carbon steel chain with a long link design for mooring applications The longer link allows the use of a shackle anywhere in the length of chain, not just at end links Greater Working Load Limit than Proof Coil Standard finish: Hot Dipped Galvanized (GALV) Packaging: Drums (order unit is feet ) Proof tested Drums Trade Mat. Inside Dimensions Hot Dipped Galvanized Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot 8 0.9 0.8 40.9 0292 208 700 678 400 4 -- 2. 2.0 2.8 2 02942 2092 6000 272 200 20 -- 8 6.6 6 2.2 64.94 24 0292 2078 9000 4082 0 40 -- 4 20.79 20.00 76.6 29 02962 208 00 62 00 0 --
Drums, BBB Chain (Order Unit is "Feet") CHAIN PRODUCTS Made especially for windlass or pocket wheel applications, low carbon steel Packaged in drums, Order unit is "feet" Standard finish: Self-colored (S.C.) or Hot Galvanized Proof tested Trade Mat. Inside Dimensions Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot Galvanized 6 8.4 9.00 2.0 002 080 90 88 0 4 2 8 0.4 0.09 28.62 6 0062 0870 270 247 400 64 Self-colored 9 6 4.9.8 40.78 20 00902 0849 87 266 200 0 7 System 4, High Test Chain (Grade 4) Uses: Designed for use in load binding, towing, logging and other applications requiring high strength Standard Material: Carbon steel Standard Finish: Bright (BRT) and Galvanized (GALV); Blu-Krome (B.K.) available in pails and reels Hallmarking: C4 or M4 Drums Round Pails Square Pails Proof tested Packaging: Drums (order unit is feet ), pails and refill reels to fit Campbell merchandisers (order unit is each ) Do not use for overhead lifting Drums, System 4, High Test Chain (Order Unit is "Feet") Trade Mat. Inside Dimensions Bright Galvanized Working Lb/ Size Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ 00 Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 lb kg Drum ft. ft. 4 7.28 7.20 0.4 08042 08769 08042 08820 2600 80 800 6 0.0 6 8.4 9.27 2.47 2 0802 088 0802 0892 900 770 0 02 9.4 8 0.9 0. 29.8 08062 0894 08062 0908 400 240 400 0.4 7 6 2.47 2.29.67 7 08072 09049 -- -- 7200 270 00 26 9. 2..70 4.7 9 08082 09094 08082 09 9200 470 200 260 7. 8 6.66 7.94 49.9 24 0802 0986 0802 0926,000 90 0 6 6.2 4 20.78 20 2.2 6.0 28 0822 0924 -- -- 20,200 980 00 8.4 The last digit of the catalog number changes to a if a non-standard quantity is ordered.
Round, Pails, System 4, High Test Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Bright Blu-Krome Working Size Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 lb kg Pail Pail ft. 4 7.28 7.20 0.4 084 09278 0842 0928 2600 80 0 98 0.0 6 8.4 9.27 2.47 2 08 09292 082 0908 900 770 00 0 9.4 8 0.9 0. 29.8 086 09 0862 0922 400 240 7 6 0.4 Approximate. Square, Pails, System 4, High Test Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Bright Blu-Krome Working Size Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 lb kg Pail Pail ft. 4 7.28 7.20 0.4 08446 8 08446 886 2600 80 00 66 0.0 6 8.4 9.27 2.47 2 0846 840 0846 8878 900 770 60 64 9.4 8 0.9 0. 29.8 08466 87 08466 888 400 240 40 6 0.4 Approximate. Square, Pails, System 4, High Test Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Polycoated Hi-Visibility Orange Blu-Krome Working Size Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 No. 02048 lb kg Pail Pail ft. 6 8.4 9.27 2.47 2 HV08426 87698 -- -- 900 770 60 64 9.4 Approximate. Drums, Marine High Test Chain (Order Unit is "Feet") Made especially for windlass or pocket wheel applications requiring higher strength Packaged in drums, Order unit is "feet" Standard finish: Galvanized Trade Mat. Inside Dimensions Galvanized Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot 6 8.4 9.0 26.48 2 082 7666 900 770 0 4 --
Drums, Sweep Chain (Order Unit is "Feet") CHAIN PRODUCTS Produced specifically for scallop and oyster dredging Thru hardened for wear resistance Packaged in drums, Order unit is "feet" Proof tested Drums Trade Mat. Inside Dimensions Bright Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot 8 6.66 6.94 49.9 24 08092 7992 800 770 0 409 6.9 Drums, Marine Alloy Trawl Chain (Order Unit is "Feet") Midlink Made of high strength, heat treated alloy steel Designed for use with the larger nets in the trawling industry Grade 80 strengths Proof tested Special heat treatment for the trawling industry Packaged in drums, Order unit is "feet" Long Link Drums Trade Inside Dimensions Bright Working Size Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm No. 02048 lb kg drum 00' foot 2 Midlink 2.0 2.8 2 04062 9044 2000 44 200 20 -- 2 Long link. 80.8 22 04072 9042 2000 44 200 90 -- 8 6 Midlink 2.2 64.94 24 040662 9042 800 820 0 40 -- 8 6 Long link.67 9.88 22 040762 90469 800 820 0 -- 4 9 Midlink.00 76.6 29 040672 9048 2800 287 00 0 -- 4 9 Long link.99 0.0 28 040772 90476 2800 287 00 480 -- 7 8 22 Midlink 4.00 02.0 28 040682 9044 4200 80 60 -- 7 8 22 Long link 4.62 7.20 0 040782 9048 4200 80 620 -- These items are made to order.
System 7, Transport Chain (Grade 70) Drums Half Drums Pails, including Anchor Lead SquarePails Uses: For use in load binding, towing and logging Can be used in accordance with Department of Transportation regulations Standard Material: Heat treated carbon steel Standard Finish: Zinc electroplate with yellow chromate conversion coating Hallmarking: "C7" or "M7" Proof tested Packaging: Drums and half drums (order unit is "feet"), pails (order unit is "each") Do not use for overhead lifting Drums, System 7, Transport Chain (Order Unit is "Feet") Trade Mat. Inside Dimensions Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Drum 00 ft. ft. 4 7. 8.94 24.46 2 0042 0676 0 40 800 94 2.8 6 8.4 9.0 26.48 2 002 06800 4700 20 0.9 8 0.4 0.6.7 4 0062 06848 6600 2990 400 0 8.8 7 6 2.47 2.29.67 7 0072 06886 870 970 00 22 9. 2..70 4.7 9 0082 0696,00 0 200 260 7. The last digit of the catalog number changes to a if a non-standard quantity is ordered. Half Drums, System 7, Transport Chain (Order Unit is "Feet") Trade Mat. Inside Dimensions Working Feet/ Size Dia. Length Width Cat. UPC No. Load Limit Half Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Drum 00 ft. ft. 4 7. 8.94 24.46 2 0040 06749 0 40 400 94 2.8 6 8.4 9.0 26.48 2 000 06787 4700 20 27.9 8 0.4 0.6.7 4 0060 06824 6600 2990 200 0 8.8 2..70 4.7 9 0080 0689 00 0 00 260 7.
Round Pails, System 7, Transport Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 4 7. 8.94 24.46 2 004 06770 0 40 0 9 2.8 6 8.4 9.0 26.48 2 00 0687 4700 20 00 4.9 8 0.4 0.6.7 4 006 068 6600 2990 7 8.8 Approximate. Square Pails, System 7, Transport Chain (Order Unit is "Each Pail") Trade Mat. Inside Dimensions Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 4 7. 8.94 24.46 2 00426 8867 0 40 6 64 2.8 6 8.4 9.0 26.48 2 0026 8874 4700 20 0 60.9 8 0.4 0.6.7 4 00626 8669 6600 2990 4 68 8.8 Approximate. Drums, Tuna Net Chain (Order Unit is "Feet") Made of high strength, heat treated steel Designed for sinker lines and bridles in purse seining Hot dipped Galvanized (GALV) Proof tested Packaged in drums, Order unit is "feet" Drums Trade Mat. Inside Dimensions Hot Dipped Galvanized Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00' foot 8 0.9 0.6 4.7 4 0462 7480 600 20 400 9.7 7 6 2.47 2.7.7 9 0472 06424 700 40 00 27 8.7 2.0.70 4.7 9 0482 064272 9600 460 200 28 7.7 8 6.6 6.9 49.87 22 0492 7707 00 640 0 7 6.2
Drums, Dock Fender Chain (Order Unit is "Feet") High tensile chain holds thick rubber fenders to dock sides Galvanized Packaged in drums, Order unit is "feet" Drums Nominal Mat. Inside Dimensions Hot Dipped Galvanized Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg drum 00 foot 2..0 89.78 20 064 8870 700 40 -- 20 -- 8 6.66 6.7 9.90 2 06 8887 200 860 -- 20 -- 4 9.78 20.7 9. 29 066 8894 2200 000 -- 446 -- 2.00 26 4. 0.8 068 897 40000 8200 -- 64 -- These items are made to order. Beacon 7 Fishing Chain Drums Uses: Designed to accommodate all types of chain needs in the trawling and marine industry Standard Material: Heat treated carbon steel Standard Finish: Bright (BRT) Hallmarking: "CB" and a Lighthouse Beacon Proof tested Packaging: Drums (order unit is "feet") Do not use for overhead lifting Trade Mat. Inside Dimensions Drum Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Drum 00 ft. ft. 8 0.9 0.8 40.9 02062 06402 6600 2990 200 4 7.6 2. 2.0 2.8 2 02082 0649,00 0 200 20.9 8 6.6 6 2.2 64.94 24 0202 06426,800 767 200 40 4.8
System 8, Cam-Alloy Chain (Grade 80) CHAIN PRODUCTS Drums Uses: Specifically recommended for overhead lifting Standard Material: Alloy steel, heat treated Standard Finish: Bright (BRT) Hallmarking: "C8" or "CA8" and traceability code Proof tested Packaging: Continuous lengths in drums (order unit is "feet") Trade Mat. Inside Dimensions Drum Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Drum 00 ft. ft. 7 2..22 6.69 8.0 8 04002 062 200 970 800 4 7. 6 8.2 8.94 24.46 2 04002 0667 400 2000 00 92 2.8 26.00 2 2.80 7.40 6 04062 060 47,700 2,600 00 96 4. 4 2.2 2.0 89.7 44 040202 064 72,00 2,800 60 2. * 2 8.0 8 4.49 4.94 49 040242 79808 80,000 6,00 4 240 2.6 * Manufactured to System 6 specifications. The last digit of the catalog number changes to a if a non-standard quantity is ordered. System 0, Cam-Alloy Chain (Grade 00) Uses: Specifically recommended for overhead lifting. 2% stronger than System 8. Enables you to perform some lifts with lighter weight chain Standard Material: Alloy steel, heat treated Proof tested The last digit of the catalog number changes to a if a non-standard quantity is ordered. Drums Standard Finish: Bright (BRT) System 0 chain should not be plated or galvanized Hallmarking: C0 and traceability code Packaging: Continuous lengths in drums (order unit is "feet") Trade Mat. Inside Dimensions Drum Working Size Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg Drum 00 ft. ft. 9 2 7.29 7.86 22.4 0 04022 82204 400 90 00 74.8 8 0.40 0.22. 4 04042 822 8800 4000 00 48 0.0 2.2.7 40.7 9 0402 82228,000 6800 00 20 7.8 8 6.64 6.9 49.87 22 04062 822 22,600 0,00 200 79 6. 4 20.80 20 2.42 6.09 28 04072 82242,00 6,000 00 98. 7 8 22.88 22 2.70 68.28 2 04082 06497 42,700 9,400 00 77 4.4
Stainless Steel Chain Uses: Food processing, chemical and marine applications, wherever non-magnetic, electrically welded corrosion resistant chain is needed Standard Material: Type 6L Stainless Standard Finish: Bright (BRT) Hallmarking: SS6 Proof tested Packaging: Bulk. Order unit is "feet" Do not use for overhead lifting Trade Mat. Inside Dimensions Bright Size Dia. Length Width Cat. UPC No. Working Load Limit Lb per Links / in. mm in. mm in. mm in. mm No. 02048 lb kg 00 ft. ft. 8 4.6 4.94 24.26 7 0924 77422 40 86 2 2.8 7 2.22 6.9 24.8 0 0927 7604 200 4 4 2.6 9 2 7.28 7.86 22.4 0929 7600 2000 907 7 4.0 6 8. 8.94 24.46 2 09 76067 2400 089 9 2.8 8 0.8 0.0 28. 4 09 76074 0 60 8.0 2.0. 9.72 8 09 7608 600 2948 24 7.7 These items are made to order. Working load limits (WLL) shown are room temperatures. Reduce WLL by % for temperatures up to 20 F, 2% between 20 F and 800 F, % between 800 F and 000 F, 0% between 000 F and 200 F, and 60% between 200 F and 400 F. Aluminum Chain Uses: Chemical processing, petroleum refining, food processing, landscaping, crowd control, wherever a non-magnetic, non-sparking chain is needed Standard Material: 06 aluminum-magnesium alloy Standard Finish: Bright (BRT) Proof tested Packaging: Bulk order unit is "feet" Do not use for overhead lifting or dynamic load conditions Trade Mat. Inside Dimensions Working Lb/ Size Dia. Length Width Cat. UPC No. Load Limit 00 Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg ft. ft. 7 64 7.26 7.06 27.7 9 062 76098 0 249 9. 6 8.4 9.4 29.49 2 06 7604 80 80 6 0.
Straight Link Machine Chain Individual chain links shown actual size in reference section page 4. Carton Reel Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT), Blu-Krome (B.K.) and Brass Glo Proof tested Packaging: 00-foot cartons (order unit is "feet"), refill reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Carton - Straight Link Machine Chain (Order Unit is "Feet") Mat. Inside Dimensions Bright Blu-Krome Galvanized Working Length Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit Carton/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg ft. 00' ft. 4.2. 4.2 -- -- 00424 060908 -- -- 2 98 00 2.8.4.9.24 6 -- -- 0024 060878 -- -- 270 22 00 20. 2. 4.6.26 7 -- -- 00224 060847 -- -- 2 47 00 9 9.7.6 4.6 6.28 7 -- -- 0024 06086 -- -- 90 77 00 2 9.0 /0.8 4.74 9. 8 -- -- 0024 060946 -- -- 46 2 00 27 6.2 2/0.9.78 20.4 9 0204 060977 02024 060984 -- -- 4 247 00.4 /0.2.0 26.6 9 -- -- 0024 060 -- -- 6 288 00 7.9 4/0.2 6.0 26.8 0 0404 060 04024 06042 -- -- 700 8 00 47.7 /0.2 6.07 27.44 004 0607 0024 06080 -- -- 92 420 00 2.2 Reels-Straight Link Machine Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Blu-Krome Brass Glo Working Reel Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel ft. in. 4.2. 4.2 AW00427 484 -- -- 2 98 00 2 22..4.9.24 6 -- -- 07267 06484 270 22 0 9 20. 2. 4.6.26 7 0726727 8447 -- -- 2 47 2 26 9.7 0.7 (Reels used on Campbell merchandisers)
Twist Link Machine Chain Carton Reel Round Pail Square Pail Individual chain links shown actual size in reference section page 4. Uses: General utility Standard Material: Low carbon steel Standard Finish: Bright (BRT), Blu-Krome (B.K.), Galvanized (GALV) and Brass Glo Packaging: 00 ft. cartons (order unit is "feet"), refill reels to fit Campbell merchandisers (order unit is "each") and pails (order unit is "each") Do not use for overhead lifting Cartons - Twist Link Machine Chain (Order Unit is "Feet") Mat. Inside Dimensions Bright Blu-Krome Galvanized Working Length Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load Limit Carton/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg ft. 00 ft..4.6 4.20 0204 068 02024 066 -- -- 2 6 00 6 2.4 2. 4.8.2 02024 0627 020224 064 -- -- 0 4 00 20 20.7 /0.8 4.68 7.26 7 -- -- 02024 0629 -- -- 440 200 00 28 7.6 2/0.9.7 9.28 7 02204 062 -- -- -- -- 20 26 00 4 6.4 4/0.2 6.89 2.2 8 -- -- 024024 060 -- -- 670 04 00 48. /0.2 6.00 2.7 9 -- -- -- -- 0204 0649 880 99 00 6 2.0 Reels-Twist Link Machine Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Brass Glo Blu-Krome Working Reel Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel ft. in. 4.2.2.7 4 -- -- AW020427 49 20 9 00 4. 2. 4.8.2 07288 06488 -- -- 0 4 70 20.7. 2. 4.8.2 -- -- 0726627 84468 0 4 2 27 20.7. 2/0.9.7 9.28 7 -- -- 072227 800 20 26 70 2 6. Rd. Pail-Twist Link Machine Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 2/0.9.7 9.28 7 02900 6944 20 26 00 02 6.4 Approximate.
Square Pails - Twist Link Machine Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 2/0.9.7 9.28 7 022026 87 20 26 7 62 6.4 Approximate. Straight Link Coil Chain Individual chain links shown actual size in reference section page 4. Square Pail Carton Reel Round Pail Uses: Typical uses include tailgates, barrier guards, animal ties Standard Material: Low carbon steel Standard Finish: Blu-Krome (B.K.) and polycoated Proof tested Packaging: 00-foot cartons (order unit is "feet"), pails (order unit is "each"), refill reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Straight Link Coil Chain (Order Unit is "Feet") Mat. Inside Dimensions Bright Blu-Krome Galvanized Working Length Trade Dia. Length Width Cat. UPC No. Cat. UPC No.. Cat. UPC No. Load Limit ft./ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg Carton 00 ft. 4.2. 28.2 -- -- 00424 064 -- -- 20 9 00 0 0.8.4.7 0.24 6 -- -- 0024 06424 -- -- 2 6 00 0. 2. 4.8 0.26 7 -- -- 00224 0694 -- -- 0 4 00 0.2.6 4.2 2.28 7 -- -- 0024 066 -- -- 70 68 00 9 9.6 /0.8 4.2 2. 8 -- -- 0024 066 -- -- 440 200 00 22 9.6 2/0.9.29.2 8 -- -- 02024 0678 -- -- 20 26 00 27 9. /0.2.0.6 9 -- -- 0024 06622 -- -- 60 274 00 9.2 4/0.22 6.9.8 0 -- -- 04024 06660 -- -- 670 04 00 8.6 /0.2 6.2 9.44 -- -- 0024 0672 -- -- 880 99 00 46 7.9
Reels-Straight Link Coil Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Yellow Polycoated Blu-Krome Working Reel Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel ft. in. 4.2. 28.2 -- -- AW00427 444 20 9 00 0.8. 2. 4.8 0.26 7 -- -- 0726827 84482 0 4 2 2 0.2 0.7 2/0.9.29.2 8 -- -- 0722827 884 20 26 40 4 9. 0.7 2/0.9.29.2 8 -- -- 072627 064869 20 26 2 7 9. 0.7 2/0.9.29.2 8 PD0722627 8409 -- -- 20 26 20 9. 0.7 /0.2.0.6 9 -- -- 072427 772 60 274 00 9.2 0.7 Round Pails - Straight Link Coil Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 2/0.9.29.2 8 0202 066 20 26 400 08 9. Approximate Square Pails - Straight Link Coil Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft..6 4.2 2.28 7 0026 8764 70 68 0 66 9.6 /0.8 4.2 2. 8 0026 87667 440 200 20 9.6 2/0.9.29.2 8 02426 888 20 26 22 62.8 9. /0.2 6.2 9.44 0026 87674 880 99 40 69 7.9 Approximate
Studio Chain Uses: Hanging theatrical lights and fixtures Standard Material: Low carbon steel Standard Finish: Bright (BRT) Proof tested Carton Packaging: 00 feet, cartons Do not use for overhead lifting Carton - Studio Chain (Order unit is "Feet") Trade Mat. Inside Dimensions Working Lb/ Size Dia. Length Width Cat. UPC No. Load Limit 00 Links/ in. mm in. mm in. mm in. mm No. 02048 lb kg ft. ft. 6/0 --.28 7.0 8.47 2 0604 767 00 499 6 8 Twist Link Coil Chain Individual chain links shown actual size in reference section page 46. Carton Reel Uses: Typical uses include tailgates, barrier guards, animal ties. Difference over straight link is twist link chain lies flat Standard Material: Low carbon steel Standard Finish: Blu-Krome (B.K.), Brass-Glo Packaging: 00-foot cartons (order unit is "feet"), refill reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Twist Link Coil Chain (Order Unit is "Feet") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Carton 00' ft..4.4 29.2 04024 06868 240 09 00 0.
Reels - Twist Link Coil Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Brass Glo Blu-Krome Working Reel Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel ft. in..4.4 29.2 07267 064777 -- -- 240 09 0 7. 0.. /0.8 4.22.27 7 -- -- AW04027 4490 4 88 00 6 9.8. Passing Link Chain Carton Reel Square Pail Individual chain links shown actual size in reference section page 46. Uses: General utility, farm and animal Standard Material: Low carbon steel Standard Finish: Blu-Krome (B.K.) and Galvanized (GALV) Proof tested Packaging: 00 ft. cartons (order unit is "feet"), refill reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Passing Link Chain (Order unit is "Feet") Mat. Inside Dimensions Blu-Krome Galvanized Working Length/ Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Carton Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Feet 00' ft. 2/0.9.88 22.47 2 -- -- 00204 060762 40 204 00 2.8 4/0.22 6.88 22.0 004024 060786 -- -- 600 272 00 4.8 Reels - Passing Link Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Blu-Krome Working Reel Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 lb kg Reel Reel ft. in. 2/0.9.88 22.47 2 0722927 87 40 204 2 42..7 0.7 2/0.9.88 22.47 2 072297 8478 40 204 0 20.8.7 0.7
Square Pails - Passing Link Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 2/0.9.88 22.47 2 00926 864 40 204 200 6.8 Approximate Handy Link Utility Chain Square Pail Reel Uses: For hanging fixtures and plants, animal ties Standard Material: Low carbon steel Standard Finish: Blu-Krome (B.K.) Proof tested Packaging: Refill reels (order unit is "each"), 00 foot square pails (order unit is "each") Do not use for overhead lifting Square Pails - Handy Link Utility Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft..4.4.4 9 09626 89 2 6 00 6 8.9 Approximate Reels - Handy Link Utility Chain (Order Unit is "Each Reel") Mat. Inside Dimensions Blu-Krome Working Reel Trade Dia. Length Width Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm in. mm No. 02048 lb kg Reel Reel ft. in..4. 4.4 9 07269 064784 2 6 7 2 8.9 0.7
Lock Link, Single Loop Chain Individual chain links shown actual size in reference section page 46. Carton Reel Sheared Wrapped Uses: Ideal for sprocket wheel, overhead door chains, general utility use Standard Material: Low carbon steel, also available in stainless and brass on special order Standard Finish: Blu-Krome (B.K.), Galvanized (GALV) Packaging: 00 ft. cartons (order unit is "feet") and on reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Lock Link, Single Loop Chain (Order Unit is "Feet") Mat. Inside Dimensions Blu-Krome Galvanized Standard Working Length Trade Dia. Length Width Cat. UPC No. Cat. UPC No. End Types Load Limit ft./ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 Wrapped Sheared lb kg carton 00' ft. 2.09 2.08 27 -- -- 0740224 06628 074024 06622 -- x 70 00 9. /0.2.29 -- -- 074024 066290 07404 06620 x -- 26 20 00 6 9. 2/0.4.48 8 -- -- 0742024 0667 074204 06699 x -- 40 4 00 2 8. /0. 4.6 4 -- -- 074024 06642 -- -- x -- 40 84 00 26 7.4 4/0.6 4.80 46 -- -- 0744024 06648 074404 066 x -- 48 220 00 29 6.7 /0.8 4 2. -- -- 074024 06666 07404 06697 x -- 80 26 00 4.6 Reels - Lock Link, Single Loop Chain (Order Unit is "Each Reel") Working Mat. Inside Dimensions Blu-Krome Galvanized Standard Load Limit, Reel Trade Dia. Length Cat. UPC No. Cat. UPC No. End Types Steel Feet/ Lb/ Links/ Width Size in. mm in. mm No. 02048 No. 02048 Wrapped Sheared lb kg Reel Reel ft. in. 2.09 2.08 27 -- -- 074027 066269 -- x 70 60 4. 0.7 /0.2.29 074027 06606 07407 0667 x -- 26 20 20 40 9. 0.7 /0. 4.6 4 072427 06484 -- -- x -- 40 84 2 7.4 0.7 /0. 4.6 4 0722427 844 -- -- x -- 40 84 0 6. 7.4 0.7 4/0.6 4.80 46 0744027 066498 074407 06628 x -- 48 220 00 29 6.7 0.7 /0.8 4 2. -- -- 07407 06660 x -- 80 26 00 4.6 0.7
Brass Safety (Plumber s) Chain Uses: Plumbing fixtures, and other applications requiring light flat metal chain Standard Material: Brass Standard Finish: Bright (BRT) Carton Reel Packaging: 00 foot cartons (order unit is "feet") and on reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Brass Safety (Plumber s) Chain (Order Unit is "Feet") Stock Inside Dimensions Bright Blu-Krome Working Lb/ Trade Thickness Length Cat. UPC No. Cat. UPC No. Load Limit Feet/ 00 Links/ Size in. mm in. mm No. 02048 No. 02048 lb kg Ctn. Feet ft. 2/0.02. 4 087204 067877 -- -- 2 0 00 2 2.8 /0.02. 4 08704 06789 -- -- 6 00 2 2.8.0.6 4 08704 067778 -- -- 4 20 00 4 8. Reels - Brass Safety (Plumber s) Chain (Order Unit is "Each Reel") Stock Inside Dimensions Bright Blu-Krome Working Reel Trade Thickness Length Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Links/ Width Size in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel ft. in. /0.02. 4 07287 06488 -- -- 6 200 2.8.
Inco Double Loop Chain Individual chain links shown actual size in reference section page 46. Carton Reel Round Pail Square Pail PS0722027 See page 28 for chart. Uses: Playground and gymnasium equipment (/0 and larger), farm and animal chains, and many general-purpose applications Standard Material: Low carbon steel Standard Finish: Blu-Krome (B.K.), Galvanized (GALV) and polycoated Packaging: 00 foot cartons, (order unit is "feet") and on reels and pails to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Note: The Playground Equipment Association has adopted /0 Inco coil chain as a minimum size chain for swing sets. Avoid twisting in suspension applications. Cartons - Inco, Double Loop Chain (Order Unit is "Feet") Mat. Inside Dimensions Blu-Krome Galvanized Working Lb/ Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ 00 Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Ctn. ft. ft..06 2.92 2 -- -- 07024 06686 -- -- 2 00 4.0 4.07 2.00 2 -- -- 070424 06688 -- -- 70 2 00 2.0.08 2.0 28 -- -- 07024 066764 0704 066788 90 4 00 6 0.9 2.09 2. 4 -- -- 070224 066696 -- -- 2 00 8 9.0..4 9 -- -- 07024 06664 -- -- 70 00 0 7.8 /0.2.78 4 -- -- -- -- 0704 066924 200 9 00 6.7 2/0.4 2.7 -- -- 072024 066979 07204 067006 2 6 00 6. 4/0.6 4 2.9 6 -- -- -- -- 07404 0670 6 66 00 2. 8/0.2 6 2.90 74 -- -- -- -- 07804 06767 70 20 00 4. Not recommended for use in swing sets. Round Pails - Inco, Double Loop Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome Working Trade Dia. Length Width Cat. UPC No. Load Limit, Steel Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Pail Pail ft. 2/0.4 2.7 -- -- 07202 066962 2 6 0 6. Approximate
Square Pails - Inco, Double Loop Chain (Order Unit is "Each Pail") Mat. Inside Dimensions Blu-Krome White Polycoated Yellow Polycoated Working Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Cat. UPC No. Load limit Feet/ Lb/ Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 No. 02048 lb kg Pail Pail ft..08 2.0 28 - - 07426 848 -- -- -- -- 90 4 70 47 0.9..4 9 - - 07426 8 -- -- -- -- 70 40 4 7.8 2/0.4.7 8 - - 072426 824 -- -- -- -- 2 6 27 0. 2/0.4 2.7 - - -- -- PA072496 862 PD072496 884 2 6 200 4. Approximate Not recommended for use in swing sets. Reels - Inco, Double Loop Chain (Order Unit is "Each Reel") Nom. Dimensions Polycoated Working in./mm Blu-Krome White Yellow Green Red Load Reel Trade Mat. Inside Cat. UPC No. Cat. UPC No. Cat. UPC No. Cat. UPC No. Cat. UPC No. Limit Feet/ Lb/ Width Links/ Size Dia. Length No. 02048 No. 02048 No. 02048 No. 02048 No. 02048 lb kg Reel Reel in. ft. 4.07/2.00/2 0720427 0649 -- -- -- -- -- -- -- -- 70 2 00 24.0 0.7 2.0.08/2.0/28 072227 06479 -- -- -- -- -- -- -- -- 90 4 200 4.0. 0.9.08/2.0/28 -- -- PA0722227 880 -- -- -- -- PG0722227 842 90 4 0 0.. 0.9 2.09/2./4 070227 066702 -- -- -- -- -- -- -- -- 2 20 20.0 0.7 9.0./.4/9 072027 06479 -- -- -- -- -- -- -- -- 70 20 2.0 0.7 7.8./.4/9 0722627 846 -- -- -- -- -- -- -- -- 70 2.8 0.7 7.8 /0.2/.78/4 AW07024 462 -- -- -- -- -- -- -- -- 200 9 00.0. 6.7 2/0.4/ 2.7/ -- -- PA0722027 8 PD0722027 886 PE0722027 846 -- -- 2 6 2 26.8 0.7. 2/0.4/ 2.7/ 0722027 826 -- -- -- -- -- -- -- -- 2 6 27.9 0.7. 2/0.4/ 2.7/ 0722087 886 -- -- -- -- -- -- -- -- 2 6 60 0.9 0.7. 2/0.4/ 2.7/ -- -- -- -- PD0722087 877 -- -- -- -- 2 6 0 0.9 0.7. /0./4 2.7/ 0726427 84444 -- -- -- -- -- -- -- -- 0 8 0 4.2 0.7. 4/0.6/4 2.9/6 072627 844 -- -- -- -- -- -- -- -- 6 66 2 4.6 0.7. Not recommended for use in swing sets. Nom. Dimensions Working in./mm Blu-Krome White Yellow Green Sleeve Red Load Reel Trade Mat. Inside Cat. UPC No. Cat. UPC No. Cat. UPC No. Cat. UPC No. Cat. UPC No. Limit Feet/ Lb/ Width Links/ Size Dia. Length No. 02048 No. 02048 No. 02048 No. 02048 No. 02048 lb kg Reel Reel in. ft. 2/0.4/ 2.7/ -- -- -- -- -- -- PS0722027 90827 -- -- 2 6 00 2.0 0.7.
Special Inco Well Chain Uses: General utility; farm and animal; well pipes Standard Material: Low carbon steel, galvanized wire Packaging: Order unit is "carton" Do not use for overhead lifting Mat. Inside Dimensions Galvanized Wire Working Trade Dia. Length Width Cat. UPC No. Load Limit Carton/ Carton/ Links/ Size in. mm in. mm in. mm No. 02048 lb kg Feet Lb ft. 2/0.4 2.0 6 - - 0762024 06774 2 6 20 4. Single and Double Jack Chain Single Carton Reel Double Individual chain links shown actual size in reference section page 47. Uses: Fixture and novelty suspension, general utility use not requiring high strength Standard Material: Low carbon steel or brass Standard Finish: Blu-Krome (B.K.), polycoated and Brass Glo Packaging: 00 foot cartons (order unit is "feet") and on reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting Cartons - Single Jack Chain (Order Unit is "Feet") Nominal Dimensions (in and mm) Mat. Inside Steel, Blu-Krome Brass, Bright Working Load Limit Lb/ Trade Dia. Length Cat. UPC No. Cat. UPC No. Steel Brass Feet/ 00 Links/ Size in. mm in. mm No. 02048 No. 02048 lb kg lb kg Carton ft. ft. 6.06 2.0 080624 067402 0864 06787 0 8 4 00 24 4.08 2.6 6 080424 0676 -- -- 6 7 00 4. 9 2..7 9 080224 06727 -- -- 29 20 9 00 8. 6 0.4.9 24 080024 067280 -- -- 4 20 4 00 4 8.6 4.09 28 0800824 0672 -- -- 60 27 4 20 00 2
Reels - Single Jack Chain (Order Unit is "Each Reel") Nominal Dimensions (in and mm) Mat. Inside Steel Blu-Krome Solid Brass, Bright Steel, Brass Glo Black Polycoated Working Load Limit Feet Lb Reel Link Trade Dia. Length Cat. UPC No. Cat. UPC No. Cat. UPC No. Cat. UPC No. Steel Brass Per Per Width Per Size in. mm in. mm No. 02048 No. 02048 No. 02048 No. 02048 lb kg lb kg Reel Reel in. ft. 8.0.9 0 AW080827 47 -- - -- - -- - 2 4 2 200. 6.06 2.0 0724027 064920 -- - -- - -- - 0 8 4 20 8. 24 6.06 2.0 -- - AW0867 479 -- - -- - 0 8 4 200 9. 24 4.08 2.6 6 -- - -- -- -- - PB0722827 879 6 7 90 0. 9 4.08 2.6 6 AW080427 4698 AW0847 4742 -- - -- - 6 7 200 2. 9 2..7 9 080227 0674 -- - -- - -- - 29 20 9 00 4 0.7 6 2..7 9 072727 064746 -- - 0724022 0649 -- - 29 20 9 00 9. 6 2..7 9 AW080227 468 AW0827 47 -- - -- - 29 20 9 200 7. 6 0.4.9 24 -- - -- - 0724020 064906 -- - 4 20 4 00. 0.4.9 24 AW080027 4674 AW0807 4728 -- - -- - 4 20 4 00. Reels - Double Jack Chain (Order Unit is "Each Reel)" Mat. Inside Dimensions Blu-Krome Brass Glo Working Reel Trade Dia. Length Width Cat. UPC No. Cat. UPC No. Load Limit Feet/ Lb/ Width Links/ Size in. mm in. mm in. mm No. 02048 No. 02048 lb kg Reel Reel in. Reel 6.06 2.0 - - 072627 064722 072667 06479 200 9. 24.0 Sash Chain Individual chain links shown actual size in reference section page 47. Carton Reel Uses: Counter-balance chain for double hung window sashes, arc lamp chain, animal chain Standard Material: Low carbon steel or bronze, and also available in stainless steel Standard Finish: Blu-Krome (B.K.) and Copper Plated Packaging: 00 ft. carton (order unit is "feet") and on reels to fit Campbell merchandisers (order unit is "each") Do not use for overhead lifting