The advice. The expertise. Wherever you are.
wherever you are A worldwide network of more than 120 specialists in the field Your engineers have elected to use the VAM Premium threads in the well architecture to address more and more severe operating conditions. The VAM Field Service teams have accumulated over 25 years of valuable experience in many drilling and completion areas such as: The VAM Field Service network has been built and developed to offer supervision and assistance to best use the VAM connection in the field. We adapt to your requirements and are available to maintain pipe integrity across the supply chain with: With over 120 field specialists located around the world VAM Field Service is committed to technical excellence.
services RigReady / RigReturn pipe inspection, at customer or VAM facilities Visual thread and seal inspection Visual pipe body inspection Full length API or alternate drift Individual pipe tally Assembly makeup supervision (pupjoints, crossovers, packers, safety valves and hangers) Check correct equiment and procedures are used at the workshop prior to makeup Ensure correct makeup parameters are used Review and accept makeup graphs signatures Supervise breakout of rig return assemblies Consultancy and training Project Management assistance VAM Awareness School for operators personnel VAM QA/QC manufacturing services "Licensor Technical Representative" to monitor manufacturing Release inspection of finished goods Gauging services of finished products Other Onshore services Selection of coupling and supervision for orientated makeups Supervision of production of GRE lined pipe Pipe wall thickness segregation for HP/HT well architecture Accessory equipment rental (lifting plugs, low torque test caps) Onsite dedicated VAM Field Inspector Full length pipe ID caliper log
services Deck inspection Identify correct pipe and accessories available Verify pipe marking and check thread and seal conditions prior to running MakeUp supervision Check correct equipment and procedures, used by casing crew, are in place prior to running Review and accept makeup graphs signatures Supervise breakout and remakeup if required Provide final supervision/inspection report to operator Personnel available either on calloff basis or dedicated team VAM Field Service recommends 24 hours coverage, with 2 VAM Field Service Specialists, on 12 hour shifts on the rig floor Pipe pullingout supervision Assist to ensure pulling and breakout of connections to minimise the need for recuts Inspect to ascertain condition for rerunning Connection expertise at rig site
services
Field Service International success ENHANCING REDUCING IMPROVING To reduce the repair costs on damaged tubular for offshore operations Field Service solutions Location: North Sea Manage the casing and tubing preparation onshore: Only good pipe sent to the rig Pipe sent just in time to avoid damages at rig site Protectors removed only from the pipe being used Centralisers fitted at the pipe preparation yard Propose contingency levels matched to rig reject rates in order to reduce: Onshore preparation Number of pipes shipped to rig Number of slings and transport frames used Number of trucks on road and handling Compare rig reject rates per rig to identify best and worst rig performance by: Measuring rig return reject rates from each rig, targeting rig site supervision and training to improve standards Using good rig returns from well 1 at the bottom of well 2 Discovering root cause of rejects using 80:20 analysis to target main causes Value created Economical Less work at rig site as pipe is sent prepared onshore Safety Environmental Less handling and transportation Less rig returns as contingeny level reduced from 15% to 5% Significantly less reject connections sent for recutting as less change of damages Never pipe sent to the rig since FIFO (First In First Out) is applied to rig returns
Field Service Delivering VALUE across the Supply Chain BENEFITS Safe operations Risk reduction Best Practices Time Saving Flexibility Well Integrity Rig site personnel Training program Tubular Essentials Integrated Services Training & Technical Support Supply Chain Support from Mill to Well VAM GLOBAL SOLUTIONS Accessories & Coordination Well Coordination Repair Services Field Services Licensee network 170 Licensees worldwide Makeup supervision To ensure the optimized use and installation of VAM connections, VAM Field Service brings its expertise at all steps of the supply chain. Our technicians ensure products are used safely in accordance with VAM Field Procedures and avoid any deviation that could be detrimental to the well life Our experience is also of great value to improve the processes and increase efficiency so ask for the signature. Scope of Services: OnShore services Rig Site services Supply Chain services is a registered Trademark of Vallourec Oil and Gas France.
World Leader in Premium Tubular Solution Europe North America South America Asia and Middle East Africa Sales Offices Steel Plants Manufacturing Plants Accessories and Repair Licensee ee Facilities Field Service International SALES & SERVICES OFFICES SERVICES OFFICES AND GAS FRANCE Boulogne Billancourt France +33 1 49093731 contact.boulogne@vallourec.com VALLOUREC DEUTSCHLAND GmbH Düsseldorf Germany +49 211 960 2030 kontakt@vallourec.com & GAS UK Aberdeenshire Kingdom +44 1224 279340 VALLOUREC NORGE Stavanger Norway +47 51 54 50 10 & GAS Atyrau Kazakhstan +7 7122 321958 kontakt@vallourec.com VALLOUREC RUS Moscow Russia +7 495 787 49 30 & GAS Cairo Egypt +2 022 521 26 89 VALLOUREC MIDDLE EAST FZE Dubai Arab Emirates +971 4 815 0000 & GAS NIGERIA Lagos Nigeria +234 1 463 7456 / 7458 & GAS CHINA Beijing Republic of China +86 10 5923 3000 VALLOUREC ASIA PACIFIC (Citra Tubindo Pte Ltd) Singapore +65 6533 8958 sales@citratubindo.com V ALLOUREC TUBOS DO BRASIL Rio de Janeiro Brazil +55 21 38738300 vendas.octgbra@vallourec.com com VALLOUREC USA Corp. Houston, Texas States +1 713 4793200 info.vusna@vallourec.com USA Houston, Texas States +1 281 8215510 VAMUSAsales@vamusa.com VALLOUREC CANADA Alberta Canada +1 403 2330119 sales.vcacan@vallourec.com & GAS MEXICO Veracruz Mexico +52 229 989 8716 contacto.octgmex@vallourec.comcom FIELD SERVICE E INTERNATIONAL Aberdeenshire, Kingdom +44 1224 279380 uk@vamfieldservice.com com FAR EAST Singapore +65 6736 23 72 singapore@vamfieldservice.com FIELD SERVICE BEIJING Beijing Republic of China +86 10 5923 3008 china@vamfieldservice.com vice G FIELD SERVICE ANGOLA Luanda Republic of Angola +244 222 3999 503 angola@vamfieldservice.com CASPIAN Baku Azerbaijan +994 124 927 673 baku@vamfieldservice.com ice SERVICES Aulnoye Aymeries France +33 3 27 69 65 89 Get the Vallourec Oil & Gas mobile app. For further information on our connections, please visit our website e VA M, and CLEANWEL CLEANWEL L www.vamservices.com are registered trademarks of Vallourec Oi l and Gas France 06/2014 CM5Ouest 09 81 14 98 50