FLOWBACK & PRODUCTION TESTING SERVICES PREPARED DEPENDABLE EFFICIENT
CATHEDRAL ENERGY SERVICES PROVIDES FLOWBACK AND PRODUCTION TESTING SOLUTIONS TO NORTH AMERICAN ENERGY COMPANIES. FLOWBACK SERVICES SERVICES During completions, Cathedral flowback and well testing packages for the following operations: Cathedral s quality control and employee training programs ensure provides operational support for consistent, reliable and dependable service while providing the highest safe well control along with the level of environmental and safety compliance. At Cathedral we pride recovery and separation of solids, ourselves on being highly responsive and prepared while providing fluids and gases. exceptional service. Cathedral is committed to: Operating in a safe and efficient manner Exceeding industry standards with employee training and QA/QC programs Minimizing environmental impact through responsible operating practices Generating value for our partners PRODUCTION TESTING Cathedral supports operations through all phases of a well life-cycle by capturing critical production measurements to improve well and reservoir performance. YOUR RELIABLE FLOWBACK AND WELL TESTING PARTNER Cathedral Energy Services experienced teams supply a range of complete Frac plug drill-out Propane frac recovery Well-test design and analysis Swabbing operations Frac flowback sand management Multi-well pads In-line production testing Well clean-ups and work-overs Pipeline cleaning and Abandonment operations dewatering support Reservoir sampling and analysis Tubing conveyed perforation support Field production support Surface well control Drillstem testing Temporary production facilities WELL CONTROL UNDER CONTROL
EQUIPPED TO MEET YOUR NEEDS FEATURES AND CAPABILITIES Multiphase skid and trailer mounted: Pressure tanks High stage separator packages (sour service) Surface data acquisition systems (SCADA) Separation: gas, oil, water, solids High pressure methanol injection pumps Adjustable wellhead chokes and ESDs Double drop manifold Flare stacks with continuous ignition systems MAXIMUM OPERATING PRESSURES 15,000 psi Emergency Shut Down (ESD) 5 TO10,000 psi Line and Sand Heaters 5 TO15,000 psi Flowline 5 TO15,000 psi Manifold 15,000 psi Wellhead Chokes Cathedral s production testing vessels are ASME U stamp certified, have internal coating, and are available in sour-service and low-temperature specs. AVAILABLE EQUIPMENT Cathedral offers a range of equipment for all types of flowback and well testing requirements. UNITS PRESSURE TANKS Piping is ASME/ANSI B1. certified. Line and sand heaters are CSA B149. compliant. STORAGE VESSELS PRESSURE RATING VOLUME GAS RATES FLUID RATE 285 psi to 2,000 psi 22 bbls to 10 bbls 9 MMCFD to 60 MMCFD 1,965 kpa to 1,790 kpa.5 m to 21. m 280 10 m /d to 1,698 10 m /d 240 m/d to,184 m/d 100 psi to 200 psi 158 bbls to 78 bbls 9 MMCFD to 15 MMCFD 9,80 bbls/d to 10,500 bbls/d 690 kpa to 1,79 kpa 25 m to 60 m 25 10 m /d to 42 10 m /d 1,500 bbls/d to 20,000 bbls/d 1,490 m/d to 1,667 m/d
CATHEDRAL CONTINUES TO INVEST IN WAYS TO FURTHER EXCEED EXPECTATIONS INDUSTRY LEADING IN-HOUSE QUALITY CONTROL AND TRAINING PROGRAMS Cathedral exceeds industry standards in managing equipment through frequent equipment inspections, strict recording guidelines and thorough preventative maintenance. Offering reliable service is a top priority and Cathedral s Quality Control and Preventative Maintenance Program ensures our clients receive consistent performance on every job. The exceptional level of service our clients receive results from Cathedral s enhanced Training and Career Development Program that merges industry standards with best practices and in-house training. Quality Control and Preventative Maintenance Program ensures equipment is safe and reliable through various proactive initiatives including: Training and Career Development Program empowers our operators to deliver safe and dependable service through various initiatives including: HEALTH, SAFETY AND ENVIRONMENT Cathedral is committed to upholding the highest standards of health, safety and environment. Eliminating losses for injuries, environment, equipment, or property is the cornerstone of Catherdal s operational philosophy and management takes a hands on approach while working towards an incident free workplace. To achieve our own and our clients HSE objectives, Cathedral has invested in proactive measures to ensure a safe work place, whether in the field or at our facilities, including: Minimizing risk through systematic compliance strategies Meaningfully engaging every employee to be HSE champions Continuous improvement of management strategies with the participation of employees Conducting comprehensive annual reviews to set goals towards achieving incident free operations DEPENDABLE OPERATORS + RELIABLE EQUIPMENT SAFE & CONSISTENT SERVICE Maintaining and inspecting equipment by a team of highly trained technicians Focusing on field competency assessments to ensure new hires are field ready Tracking equipment throughout its life-cycle with best-in-class software Exceeding industry and manufacturers recommended inspection and maintenance intervals Equipping operators with a deeper technical understanding to confidently troubleshoot on the fly Investing in continuous development of every employee at all levels of the organization
Contact Cathedral Today US Operations Canadian Operations info@cathedralenergyservices.com 877.825.1002 866.276.8201 cathedralenergyservices.com V 1.0 /10/15