MXFLEX PINNCLE CBLE Results in Maximum Efficiency and Reduced Backlash Maximized the cable efficiency by reducing 50% of the contact area of core-to-liner when minimal input force is applied. Results in lower backlash at all input force by reducing clearance and contact area between core and liner. Newly designed Maxflex Control Cable represents the superior quality to the other manufacturer's control cable. Its corrosion resistant construction and high efficiency have literally set the industry standard. It is Pretech's continuous goal to manufacture the best cable in the industry. Features Revolutionary design of grooved both liner and inner core to minimized friction. Unique core design to minimize lost motion. Durable UV resistant HDPE outer casing resistant to salt water, chemicals, petrol & oil and other environmental elements. ll stainless steel end fittings. High efficiency with smooth operation. Page 18
MXFLEX PINNCLE CBLE Pinnacle Engine Control Cable - Throttle & Shift 639XX Specification KM Maxflex Pinnacle - Mercury, Mercruiser, Mariner (except pre-1993 40HP and lower models) 610XX OC Maxflex Pinnacle - Mariner (pre-1993 low HP engine: 40 HP and below) 530XX Gen II Maxflex Pinnacle - Mercury Gen ll Platinum cable for 4000/4500 Gen ll remote controls 695XX KB Maxflex Pinnacle - Mercury, Mercruiser, Mariner (except pre-1993 40HP and lower models: 10-32 threaded) 395XX MC Maxflex Pinnacle - OMC /Johnson /Evinrude (1979-date), OMC turbo jet throttle control 419XX VO Maxflex Pinnacle - Volvo engines using OMC controls: OMC turbo jet (gate controls) Pinnacle Control Cable 630XX Specification 3300S Maxflex Pinnacle - 3" travel 10-32 threaded 460XX 4300BC Maxflex Pinnacle - 3" travel 1/4-28 threaded 650XX 4300C Maxflex Pinnacle - 3" travel 1/4-28 threaded 690XX 6400BC Maxflex Pinnacle - 4" travel 5/16-24 threaded 680XX 6400C Maxflex Pinnacle - 4" travel 5/16-24 threaded Page 19
MXFLEX CBLE Engine Control Cable - Throttle & Shift 637XX Specification KM Maxflex- Mercury, Mercruiser, Mariner (except pre-1993 40HP and lower models) 310XX OC Maxflex - Mariner (pre-1993 low HP engine: 40 HP and below) 535XX Gen II Maxflex - Mercury Gen ll Platinum cable for 4000/4500 Gen ll remote controls 635XX KB Maxflex - Mercury, Mercruiser, Mariner (except pre-1993 40HP and lower models: 10-32 threaded) 305XX MC Maxflex - OMC /Johnson /Evinrude (1979-date), OMC turbo jet throttle control 307XX ME Maxflex - OMC /Johnson /Evinrude (1979) 410XX VO Maxflex - Volvo engines using OMC controls: OMC turbo jet (gate controls) Control Cable 330XX Specification 3300C Maxflex - 3" travel 10-32 threaded Page 20
UTILITY CBLE Vernier Control Head nd Cable Vernier Control is idear for remote manual operation of engine RPM setting (throttles), chokes, valves or application requiring coarse or fine adjustment Red release button for quick identification. Easy grip knob designed for fingertip adjustment, 6 1/4 turns per inch. Positive adjustable brake Connectors Coupling nut disconnects head from cable for fast, easy installation. Vernier Control Head Mounting Nut 901XX End fitting 900XX No end fitting Vernier head only: Part no. 377941 650XX Bulk end fitting 690XX 3300C support tube and end rod How To Measure ll L-Type cables are measured to the point where the coar wire exits the cable conduit. Cables with rod-type end fittings are measured to the rod end. Page 21
UTILITY CBLE T-Handle Utility Cable T-Handle Utility Cables are idear for a variety of control needs such as chokes, switches, throttles, valves, latches, etc. with a light or "pull only" load. 315XX End fitting 318XX No end fitting 316XX Bulk end fitting 31533XX 3300C support tube and end rod T-Handle only: Part no. 31780 How To Measure Length Length SD Control 31916 SD Control compatible with 3300C and Pinnacle series cables 31917 Mounting Bracket (Stainless Steel) Page 22
CONTROL CBLE DPTER ND HRDWRE 30055 30172 30190 30212 30107 30493 Cable dapter Kits 30055 OMC Sterndrive Cable dapter 30172 Johnson /Evinrude Outboard Cable dapter 30190 Mercury Outboard Cable dapter 30212 Mercruiser Sterndrive Cable dapter Control dapter Kits 30107 Mercury Control dapter 30493 OMC Control dapter Hook Clip - Inch (mm) 336174 215154 B 336174 C D E 215154 3000 Series Stainless Steel Hook Clip 1.0 (25.4) 0.5 (12.7) 0.37 (9.5) 1.5 (38.1) 0.2 (5.0) 3000 Series Stainless Steel Double Hook Clip 1.26 (32.1) 0.75 (19.1) 0.37 (9.5) 1.5 (38.1) 0.2 (5.0) Clevis 331125 339025 Page 23 - Inch (mm) B C D 331125 3300 Series clevis (10-32) 2 (50.8) 9 / 32 (7.1) 1 / 4 (6.4) 1¼ (31.8) 1 / 4 (6.4) 1¼ (31.8) 4300 Series clevis (1/4-28) 2 (50.8) 9 / 32 (7.1)
CONTROL CBLE DPTER ND HRDWRE Clamp, Shim, Terminal Eye, Pivot, Stop Collar 332010/331532 331980/331134 331538 308729/337963 3000 Series 332010 Clamp (Stainless Steel) 331538 Shim (Stainless Steel) 331804 Clamp & Shim Kit (Stainless Steel) 331980 Terminal Eye 308650 Brass Pivot 337963 Stop Collar 308650 4000 Series 331532 Clamp (Stainless Steel) 331538 Shim (Stainless Steel) 332756 Clamp & Shim Kit (Stainless Steel) 331134 Terminal Eye 308729 Brass Pivot 308729 Ball Joint 31799 31126 29104 098444S 100623S - Inch (mm) B C D Type 3000 Series S.S. Ball Joint (10-32) 29/32 (23.0) 15/32 (11.9) 7/16 (11.1) 10-32 UNF B 1/4-28 UNF 1/4-28 UNF 3000 Series S.S. Ball Joint (1/4-28) 31/32 (24.6) 15/32 (11.9) 9/16 (14.3) 4000 Series S.S. Ball Joint (1/4-28) 31/32 (24.6) 15/32 (11.9) 9/16 (14.3) S.S. Quick-Release Type Ball Joint (1/2-20) 2 1 1¼ 3/8-24UNF S.S. Quick-Release Type Ball Joint (1/2-20) 2 1 1¼ 1/2-20UNF Page 24