CISCO TECHNICAL TRAINING As a Cisco Learning Partner Associate, New Horizons employs Certified Cisco Systems Instructors and delivers Cisco authorized and approved content, including product-specific traning, technology training and certification-preparation courses.
BORDERLESS NETWORKS Cisco Wide-Area Application Services (CWAAS) This course will teach learners how to design and deploy a solution using Cisco WAAS that improves application performance over the WAN while enabling infrastructure consolidation. The learner will also understand Cisco WAAS optimization technology, design considerations, network integration, and system troubleshooting aspects. DAYS: 5 Cisco Wide-Area Application Services Cisco WAAS Quick Start Implementation, Integration, and Management Advanced Cisco WAAS Configuration Cisco WAAS Design Cisco WAAS Application Optimizers Cisco WAAS Troubleshooting CLASSES START: 7/16 Designing for Cisco Internetwork Solutions (DESGN) This five-day course will enable learners to gather customer internetworking requirements, identify solutions, and design the network infrastructure and elements to ensure the basic functionality of the proposed solutions. DAYS: 5 Network Design Methodology Overview Structuring and Modularizing the Network Designing Basic Campus and Data Center Networks Designing Remote Connectivity Designing IP Addressing and Selecting Routing Protocols Evaluating Security Solutions for the Network Identifying Voice and Video Networking Considerations Identifying Design Considerations for Basic Wireless Networking CLASSES START: 6/25 IPv6 Fundamentals, Design, and Deployment (IP6FD) This course provides an overview of IPv6 technologies, covers IPv6 design and implementation, describes IPv6 operations, addressing, routing, services, transition, and deployment of IPv6 in enterprise as well as in service provider networks, and includes case studies useful for deployment scenarios. DAYS: 5 Introduction to IPv6 IPv6 Operations IPv6 Services IPv6-Enabled Routing Protocols IPv6 Multicast Services IPv6 Transition Mechanisms IPv6 Security Deploying IPv6 IPv6 and Service Providers IPv6 Case Studies CLASSES START: 8/27, 12/10 Implementing Cisco IP Routing (ROUTE) This course is designed to provide professionals of medium to large network sites with information on the use of advanced routing in implementing scalability for Cisco routers that are connected to LANs and WANs. DAYS: 5 Planning Routing Services to Requirements Implementing an EIGRP based Solution Implementing a Scalable Multiarea Network OSPF-Based Solution Implementing an IPv4-Based Redistribution Solution Implementing Path Control Connecting an Enterprise Network to ISP Networks E-Learning ROUTE-01 of 3: Implement Path Control E-Learning ROUTE-02 of 3: Implementing IPv6 E-Learning ROUTE-03 of 3: Implementing Routing Facilities for Branch Offices and Mobile Workers CLASSES START: 7/16, 9/10, 11/5 1 info@nhcourses.com
Implementing Cisco MPLS This design document is for the refresh of the Implementing Cisco MPLS (MPLS) instructor-led training (ILT) course, which is used for the Multiprotocol Label Switching (MPLS) Cisco CCIP certification tract. DAYS: 5 MPLS Features Label Assignment and Distribution Frame-Mode MPLS Implementation on Cisco IOS Platforms MPLS Virtual Private Network Technology MPLS VPN Implementation Complex MPLS VPNs Internet Access and MPLS VPNs MPLS Traffic Engineering Overview CLASSES START: 7/30 Implementing CiscoWorks LMS (CWLMS) Implementing CiscoWorks LMS (CWLMS) v4.0 teaches learners how to use the CiscoWorks LAN Management Solution (LMS) 4.0 to manage their network. The focus is to find the correct tools within CiscoWorks to document the network inventory, manage device configurations, control software updates, monitor performance, troubleshoot faults, and simplify the deployment of new Cisco technologies. DAYS: 5 Introduction to CiscoWorks LMS 4.0 Getting Started My Menu Inventory Management Configuration and Software Management Network Monitoring and Troubleshooting CiscoWorks LMS Work Centers & Administration CLASSES START: 9/24, 12/10 Implementing Switch Networks (SWITCH) This course is designed to help students prepare to plan, configure, and verify the implementation of complex enterprise switching solutions for campus environments using the Cisco Enterprise Campus Architecture. DAYS: 5 Analyzing Campus Network Designs Implementing VLANs in a Campus Network Implementing Spanning Tree Implementing Inter-VLAN Routing Implementing a Highly Available Network Implementing Layer 3 High Availability Minimizing Service Loss and Data Theft in a Campus Network Accommodating Voice and Video in Campus Networks Integrating Wireless LAN into a Campus Network CLASSES START: 7/9, 8/6, 9/24, 10/22, 11/26 Interconnecting Cisco Network Devices Accelerated (CCNAX) This course focuses on skills and knowledge necessary to install, operate, and troubleshoot a small to medium-size branch office Enterprise network. This course is an accelerated time format alternative to completion of ICND1 and ICND2. DAYS: 5 Building a Simple Network Switching Wireless LANs LAN Connections WAN Connections Network Environment Management Medium-Sized Routed Network Construction Single-Area OSPF Implementation EIGRP Implementation Access Control Lists Address Space Management LAN Extension into a WAN with Frame Relay CLASSES START: 7/9, 7/30, 8/20, 9/10, 10/1, 10/22, 11/12, 12/3 info@nhcourses.com 2 æ
Interconnecting Cisco Networking Devices Part 1 (ICND1) This course focuses on providing the skills and knowledge necessary to install, operate, and troubleshoot a small branch office Enterprise network, including configuring a switch, a router, and connecting to a WAN and implementing network security. DAYS: 5 Building a Simple Network Ethernet Local Area Networks Wireless Local Area Networks Local Area Network Connections Wide Area Networks Connections Network Environment Management CLASSES START: 7/9, 7/16, 7/30, 8/13, 8/20, 8/27, 9/10, 9/24, 10/1, 10/8, 10/22, 11/5, 11/26, 12/10 - NIGHT CLASSES AVAILABLE Interconnecting Cisco Networking Devices Part 2 (ICND2) This course focuses on the skills and knowledge necessary to install, operate, and troubleshoot a small to medium-size branch office Enterprise network, including configuring switches and routers, connecting to a WAN and implementing network security. DAYS: 5 Small Network Implementation Medium-Sized Switched Network Construction Medium-Sized Routed Network Construction Single Area OSPF Implementation EIGRP Implementation Access Control Lists Address Space Management LAN Extensionin to a WAN CLASSES START: 7/30, 8/6, 8/20, 9/10, 9/17, 10/1, 10/15, 10/22, 10/29, 11/12, 12/3, 12/10, 12/17 - NIGHT CLASSES AVAILABLE Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) The course will provide information about troubleshooting and maintaining particular technologies, as well as procedural and organizational aspects of the troubleshooting and maintenance process. DAYS: 5 Planning Maintenance for Complex Networks Planning Troubleshooting Processes for Complex Enterprise Networks Maintenance and Troubleshooting Tools and Applications Maintaining and Troubleshooting Campus Switching-Based Solutions Maintaining and Troubleshooting Routing-Based Solutions Maintaining and Troubleshooting Network Security Solutions Maintaining and Troubleshooting Network Security Solutions Maintaining and Troubleshooting Integrated, Complex Enterprise Networks CLASSES START: 7/23, 8/13, 9/17, 10/8, 10/29, 11/12, 12/10 COMMUNICATIONS Deploying Unified Contact Center Express Software (UCCXD) This includes the deployment of Cisco Unified Contact Center Express (CCX) v8.0 and Cisco Unified IP Interactive Voice Response (IVR) as contact center solutions. Tasks include planning, installation and configuration, scripting, and troubleshooting. DAYS: 5 Cisco Unified Contact Center Express v8.0 Product Overview Installing and Configuring Cisco Unified Contact Center Express v8.0 Cisco Unified Contact Center Express v8.0 Scripting Cisco Unified Contact Center Express v8.0 ACD Operations Cisco Unified Contact Center Express v8.0 Premium Functions Cisco Unified Contact Center Express v8.0 Maintenance Tools CLASSES START: 9/17, 12/3 3 info@nhcourses.com
Implementing Cisco Unified Communications Manager Part 1 (CIPT1) Students will perform post-installation tasks, configure Cisco Unified Communications Manager, implement Media Gateway Control Protocol (MGCP) and H.323 gateways, and build dial plans to place on-net and off-net phone calls. DAYS: 5 Introduction to Cisco Unified Communications Manager Administering Cisco Unified Communications Manager Enabling Single-Site On-Net Calling Single-Site Off-Net Calling Media Resources Feature and Application Implementation CLASSES START: 7/3, 10/1, 12/1 Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Students will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure and implement solutions to reduce bandwidth requirements in the IP WAN. DAYS: 5 Multisite Deployment Implementation Centralized Call-Processing Redundancy Implementation Bandwidth Management and CAC Implementation Implementation of Features and Applications for Multisite Deployments CCD CLASSES START: 8/20, 11/12 Implementing Cisco Unity Connection (IUC) Implementing Cisco Unity Connection (IUC) v8.0 describes Cisco Unity Connection installation, networking, and advanced features, options, and configuration settings. DAYS: 5 Introduction to Cisco Unity Connection Cisco Unity Connection Installation and Integration Digital Networking Configuration VPIM Networking Configuration Advanced Integration Concepts Cisco Unity Connection Tools CLASSES START: 7/9, 10/15 Implementing Cisco Voice Communications & QoS (CVOICE) This course provides an understanding of converged voice and data networks and the challenges faced by the various network technologies. Students receive knowledge and skills required to integrate gateways and gatekeepers into an enterprise VoIP network. DAYS: 5 Introduction to VoIP Voice Part Configuration VoIP Gateway Implementation Dial Plan Implementation on Voice Gateways H.323 Gatekeepers ITSP Connectivity CLASSES START: 7/9, 9/17, 11/26 Integrating Cisco Unified Communications Applications (CAPPS) Integrating Cisco Unified Communications Applications (CAPPS) teaches learners the integration options of Cisco Unified Presence, Cisco Unity Express, and Cisco Unity Connection. It describes voice messaging deployment scenarios, Cisco Unified Presence features, and troubleshooting mechanisms as well as Cisco Unified Presence and Cisco Unified Personal Communicator integration options with Cisco Unified Communications Manager. DAYS: 5 Introduction to Voice Mail Cisco Unity Connection in a Cisco Unified Communications Manager Environment Cisco Unity Express Implementation in Cisco Unified Communications Manager Express Environment Voice Profile for Internet Mail Implementation Cisco Unified Presence Implementation CLASSES START: 8/13 info@nhcourses.com 4 æ
Introducing Cisco Voice and Unified Communications Administrator (ICOMM) This course teaches students the architecture, components, functionalities, and features of Cisco Unified Communications solutions and describes how daily job tasks, like system monitoring, moves, adds, and changes are performed on Cisco Unified Communications Manager. DAYS: 5 Overview of Cisco Unified Communications Solutions Overview of Administrator and End-User Interfaces Call Flows in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express Endpoint and End User Administration Enablement of End User Telephony and Mobility Features Enablement of Cisco Unity Connection and Cisco Unified Presence Cisco Unified Communications Solutions Maintenance CLASSES START: 8/27, 10/1, 11/5, 12/10 Unity Connection Administration (UCA) The course presents Cisco Unity Connection with the focused goal of providing the administrators with the necessary skills to perform their day-to-day job functions using the Cisco Unity Connection version 8.5 system. DAYS: 2 Introduction to Cisco Unity Connection Configuring Users and Contacts Implementing Features Using Cisco Unity Connection Applications, Tools and Reports CLASSES START: 7/12, 8/16, 9/20, 10/25, 11/29 SECURITY Deploying Cisco ASA Firewall Features (FIREWALL) Students will gain the knowledge and skills needed to choose, configure, and troubleshoot the majority of perimeter security features of Cisco ASA adaptive security appliance to reduce risk to the IT infrastructure and its applications. DAYS: 5 Cisco ASA Adaptive Security Appliance Essentials Basic Connectivity and Device Management Network Integration Cisco ASA Adaptive Security Appliance Policy Control Cisco ASA Adaptive Security Appliance High Availability and Virtualization CLASSES START: 7/16, 8/13, 9/17, 10/22, 12/3 Deploying Cisco ASA VPN Solutions (VPN) This course aims at choosing, configuring, and troubleshooting the majority of Cisco ASA adaptive security appliance remote access and siteto-site VPN features to reduce risk to IT infrastructure and its applications. DAYS: 5 Cisco ASA Adaptive Security Appliance VPN Architecture and Common Components Cisco ASA Adaptive Security Appliance Clientless Remote Access SSL VPN Solutions Cisco AnyConnect Remote Access SSL Solutions Cisco ASA Adaptive Security Appliance Remote Access IPsec VPNs Cisco ASA Adaptive Security Appliance Site-to-Site IPsec VPN Solutions Endpoint Security and High Availability for Cisco ASA VPNs CLASSES START: 7/30, 10/15 5 info@nhcourses.com
Implementing Cisco Intrusion Prevention System (IPS) This course provides network security engineers with the knowledge and skills needed to deploy Cisco IPS-based security solutions. Students will be able to reduce risk to the IT infrastructure and applications using Cisco IPS features. DAYS: 5 Introduction to Intrusion Prevention and Detection, Cisco IPS Software, and Supporting Devices Installing and Maintaining Cisco IPS Sensors Applying Cisco IPS Security Policies Adapting Traffic Analysis and Response to the Environment Managing and Analyzing Events Deploying Virtualization, High Availability, and High Performance Solutions Configuring and Maintaining Specific Cisco IPS Hardware CLASSES START: 7/16, 10/8 Implementing Cisco IOS Network Security (IINS) Students will focus on the design, implementation, and monitoring of a comprehensive security policy, using Cisco IOS security features and technologies. DAYS: 5 Networking Security Fundamentals Protecting the Network Infrastructure Threat Control and Containment Secure Connectivity CLASSES START: 8/6, 10/1, 11/26 Implementing Cisco NAC Appliance (CANAC) The Cisco NAC Appliance is an easily deployed software NAC solution that can automatically detect, isolate, and clean infected or vulnerable devices that attempt to access your network. The Implementing Cisco NAC Appliance (CANAC) v2.1 course provides learners with the skills and knowledge needed to implement the Cisco NAC Appliance solution. DAYS: 3 Cisco NAC Endpoint Security Solutions Cisco NAC Appliance Common Elements Configuration Cisco NAC Appliance Implementation Cisco NAC Appliance Implementation Options Cisco NAC Appliance Monitoring and Administration CLASSES START: 7/11, 10/10 Cisco Certifications bring valuable, measurable rewards to network professionals and the organizations that employ them. View Cisco Associate, Professional, and Expert Certification training paths at www.nhcourses.com/certifications info@nhcourses.com 6 æ
Introduction to 802.1X Operations for Security Professionals (802.1X) The goal of the course is to provide students with foundational knowledge in the capabilities and functions of the IEEE 802.1X protocol and the ability to configure the Cisco Identity Services Engine (ISE) for 802.1X operation. The course will introduce the architecture, components, and features of a Cisco TrustSec network designed around the IEEE 802.1X and RADIUS protocols. DAYS: 3 Cisco TrustSec Port-Based Authentication Configure Devices for 802.1X Operation Configure Guest Access Design Cisco TrustSec Networks with Cisco ISE and 802.1X CLASSES START: 6/25 Securing the Cisco Routers and Switches (SECURE) This course aims at providing network security engineers with the knowledge and skills needed to secure Cisco IOS Software router- and switch-based networks, and provide security services based on Cisco IOS Software. DAYS: 5 Deploying Cisco IOS Software Network Foundation Protection Lesson Deploying Cisco IOS Software Threat Control and Containment Deploying Cisco IOS Software Siteto-Site Transmission Security Deploying Secure Remote Access with Cisco IOS Software CLASSES START: 7/9, 9/24, 12/17 STORAGE & DATA CENTER Cisco Application Control Engine Appliance (ACEAP) Implementing the Cisco ACE Appliance is a four-day, instructor-led, lecture and lab course. You will learn how to deploy and configure the Cisco Catalyst 4710 Application Control Engine (ACE) Appliance. DAYS: 4 Introducing the Cisco ACE 4710 Appliance Deploying Cisco ACE Modular Policy CLI Managing the Cisco ACE Appliance Security Features Layer 4 Load Balancing Health Monitoring Layer 7 Protocol Processing Processing Secure Connections Deploying Application Acceleration and Optimization High Availability Integrating Multiple Features CLASSES START: 9/4 Data Center Unified Computing Design (DCUCD) The Cisco Data Center Unified Computing Design (DCUCD) v4.0 course enables engineers to choose and design scalable, reliable, and intelligent data center unified computing and virtualization solutions. These solutions are based on the Cisco data center product portfolio with a Cisco Unified Computing System (UCS) as a centerpiece integrated with contemporary server virtualization solutions (such as VMware vsphere, Microsoft Hyper-V R2, and Citrix for Cisco Virtualization Experience Infrastructure [VXI]) and operating systems (such as Microsoft Windows and Linux). DAYS: 5 Cisco Unified Computing System Solution Assess Computing Solution Requirements Design Cisco Unified Computing System Solution Design Server Deployment Design Cisco UCS Solution Management Design Advanced Server Deployment Evaluate Cisco Unified Computing System Solutions Plan Migration to Cisco Unified Computing System Solution CLASSES START: 9/10, 11/26 7 info@nhcourses.com
Not sure which course you need? One of our experienced Training Advisors can help! Call or email us today. Data Center Unified Computing Server Integration (DCUCSI) Data Center Unified Computing Server Implementation (DCUCSI) is designed to serve the needs of engineers and technicians who implement Cisco Unified Computing System (UCS) B-Series Blade Servers and Cisco UCS C-Series Rack-Mount Servers. DCUCSI guides learners through rack installation and the provisioning of server hardware, operating systems or hypervisors, and applications. Significant content is devoted to management, maintenance, and troubleshooting. DAYS: 5 UCS Architecture Overview UCS B-Series Servers Basic Service Profiles and LAN Connectivity Extended Service Profiles and SAN Connectivity Enhancing the Functionality of Service Profiles Virtual Networking Considerations Integrating the C-Series in UCS Managing the UCS CLASSES START: 8/20, 9/4, 10/22, 12/17 Implementing Advanced Storage Networking Solutions (IASNS) Implementing Advanced Cisco Storage Networking Solutions (IASNS) v4.2 is a five-day lecture and lab course using NX-OS v5.0.4 that provides students with advanced skills in implementing and troubleshooting Cisco storage networks. DAYS: 5 Building Enterprise SAN Fabrics Management and Security Services Implementation Advanced Troubleshooting ISCSI Implementation CLASSES START: 8/27, 11/12 Implementing Cisco Data Center Unified Fabric (DCUFI) This course covers the key components and procedures needed to install, configure, manage, and troubleshoot the Cisco Nexus 7000 and 5000 in the network and SAN environment. DAYS: 5 Cisco Nexus Product Overview Cisco Nexus Switch Feature Configuration Cisco Nexus Switch Advanced Feature Configuration Cisco Nexus Series Switch Management Redundancy on Cisco Nexus Switches Fibre Channel over Ethernet Fibre Channel over Ethernet Configuration Troubleshooting on Cisco Nexus Switches CLASSES START: 6/11, 8/6, 10/1, 10/8, 11/26 Implementing Cisco Storage Networking Solutions (ICSNS) Implementing Cisco Storage Networking Solutions (ICSNS) v4.2 is a five-day lecture and lab course using NX-OS v5.0.4, that provides learners with fundamental skills in implementing and troubleshooting Cisco storage networks. DAYS: 5 Cisco MDS 9000 Platform System Installation and Initial Configuration Building Virtual SANs Implementing FCIP Troubleshooting Tools and Scenarios CLASSES START: 7/9, 10/1, 12/17 info@nhcourses.com 8 æ
For course listings, information about certifications, and more visit us online at www.nhcomputerlearning.com COLORADO Colorado Springs 888-835-4519 Denver 866-599-6824 KANSAS Kansas City 888-246-8022 KENTUCKY Louisville 888-245-1823 NEW MEXICO Albuquerque 888-692-2976 OKLAHOMA Oklahoma City 888-253-1863 Tulsa 888-260-4459 OHIO Cincinnati 888-237-1308 Dayton 888-244-2035 SOUTH DAKOTA Sioux Falls 888-299-0160 TEXAS Austin 888-710-0839 Dallas 888-735-6306 Central Texas 888-810-9016 El Paso 888-718-2792 Fort Worth 888-793-1228 Houston 888-272-3399 San Antonio 888-733-2160 9 info@nhcourses.com