silvia.bittolobon@unipg.it ; silvia.bittolo@gmail.com



Similar documents
Italy Città di Castello (Perugia Italy) 18/06/1970

E UROPEAN CURRICULUM VITAE FORMAT

Supplementary data. Ricerche (CNR), Via Orabona, Bari, Italy. cardone@ba.iccom.cnr.it; 10 mrcr01ch@uniba.it.

Pulsed laser deposition of organic materials

GREEN NANOTECHNOLOGY. Geoffrey. Energy in the Built Environment. Solutions for Sustainability and. B. Smith Claes G. Granqvist.

Burcu Saner, Firuze Okyay, Fatma Dinç, Neylan Görgülü, Selmiye Alkan Gürsel and Yuda Yürüm*

OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS

Light management for photovoltaics using surface nanostructures

CURRICULUM VITAE MICAELA CASTELLINO

Focused Ion beam nanopatterning: potential application in photovoltaics

Thin film structures of diamond-like carbon prepared by pulsed plasma techniques 325. Publications

CIRICULUM VITAE 1. PERSONAL. Date of Birth-Place : March 2 nd Balikesir, Turkey

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

CURRICULUM VITAE ET STUDIORUM

1. INTRODUCTION ABSTRACT

Graphene a material for the future

Faculty of Engineering and Architecture MATERIALS SCIENCE AND ENGINEERING

IBS - Ion Beam Services

Tecnologie convenzionali nell approccio top-down; I: metodi e problematiche per la deposizione di film sottili

Barrier Coatings: Conversion and Production Status

CS257 Introduction to Nanocomputing

BNG 331 Cell-Tissue Material Interactions. Biomaterial Surfaces

Mechanical Engineering. 01/05/2014-(30/04/2016) Imperial College, London, United Kingdom. 01/01/ /04/2014 Politecnico di Bari, Bari, Italy.

Biomaterials in tissue engineering

Overview of Recent Patent Activity in Nanotech- Enabled Power Systems. Jeffrey H. Rosedale, Ph.D., J.D. Partner

Neal O Hara. Business Development Manager

Nanotechnology for Food Processing and Packaging

JOURNAL INTEGRATED CIRCUITS AND SYSTEMS, VOL 1, NO. 3, JULY

Electrophoretic Gold Nanoparticles Depostion On Carbon Nanotubes For NO 2 Sensors

Soft lithography for diffractive microfabrications

RECENT ACHIEVEMENTS ON NANOCRYSTALLINE MATERIALS FOR SOLID STATE HYDROGEN STORAGE

Open selection for admission to Doctoral studies (PhD) at the University of Calabria (XXVI CYCLE) Information (summary) for foreign students

Ikerbasque Research Professor, Centre for Cooperative Research in Biomaterials, CIC. biomagune, 20009, San Sebastián, Spain

Latest Advances in Solar Cell Technology

NANOSTRUCTURED ZnO AND ZAO TRANSPARENT THIN FILMS BY SPUTTERING SURFACE CHARACTERIZATION

Opaline Photonic Crystals: How Does Self-Assembly Work?

Light management for photovoltaics. Ando Kuypers, TNO Program manager Solar

Study on Wet Etching of AAO Template

TERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call)

Modification of Graphene Films by Laser-Generated High Energy Particles

Materials Science and Engineering, National Dong Hwa University Degree requirements for the PhD program Approved on March 18, 2014

Education of Solar Cells at Budapest University of Technology and Economics

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.

Personal information. Rome (Italy), 14th May 1983

joining expertise at the service of the plastic converting industry

Giordano Cattani Curriculum Vitae

Nanofabrication using anodic alumina templates. IFIMUP and IN Institute of Nanoscience and Nanotechnology

Click to edit Master title style. The Prospects for Cost-Competitive Photovoltaics: From Nanoscale Science to Macroscale Manufacturing

Graduate Student Presentations

ACADEMIA SINICA Taiwan International Graduate Program

and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.

How To Learn More About Fabio Carniato

Luminescence study of structural changes induced by laser cutting in diamond films

Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe. Keywords: Carbon Nanotube, Scanning Probe Microscope

CURRİCULUM VİTAE Present Assist. Prof. Dr., Material Science and Engineering Department, Cankaya University

Tiangang TM BW-10LD (622)

1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III

Improving Printability of Functional Materials by. Laboratory of Paper Coating and Converting Martti Toivakka and Jouko Peltonen

Rosalinda Inguantaa*, Emanuele Scadutoa, Patrizia Livrerib, Salvatore Piazzaa, Carmelo Sunseria

BRIEF BIO-DATA. Degree University Year Remarks PhD (Physics) Indian Institute of 2008 First Technology Delhi to

Engineering Materials Research /DEVISER/

The chemical interactions of the template molecule are primarily dependent on the choice of polymer

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)

RECRUITING PART- TIME or FULL- TIME HIGH SCHOOL TEACHERS FOR EUROPEAN SCHOOL ENGLISH SECTION ITALIAN SECTION - SWALS ( YEAR)

Using Piezoelectric Printing to Pattern Nanoparticle Thinfilms. Jan Sumerel, Ph.D. FUJIFILM Dimatix, Inc. Santa Clara, California USA

Physical Properties and Functionalization of Low-Dimensional Materials

CAPITOLO III MATERIALI ASSEMBLATI E AUTOASSEMBLATI. Photonics and Biophotonics Organics Synthesis - PhoBOS

Active Nanocomposite Materials

THIN FILM MATERIALS TECHNOLOGY

POLYMER NANOCOMPOSITES ARE THE FUTURE

Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)

Coating Technology: Evaporation Vs Sputtering

Call for applications for one research fellowship for foreign researchers. The President Decrees

Directed Self- Assembly of Block Copolymers; an Alternative Tool for Sub- 20 nm Lithography Parvaneh Mokarian

Grad Student Presentation Topics PHGN/CHEN/MLGN 435/535: Interdisciplinary Silicon Processing Laboratory

Plasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology

Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014

Supporting Online Material for

UNIVERSITA DEGLI STUDI DI ROMA LA SAPIENZA DIPARTIMENTO INGEGNERIA CHIMICA MATERIALI AMBIENTE

Electron Beam Technology for Pressure Sensitive Adhesive Applications

Fluid transport at the nano- and meso- scales

PLASMA TECHNOLOGY OVERVIEW

Improved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process

Chemical vapor deposition of novel carbon materials

h e l p s y o u C O N T R O L

Basic principles and mechanisms of NSOM; Different scanning modes and systems of NSOM; General applications and advantages of NSOM.

Laboratorio Regionale LiCryL CNR-INFM

Excellence in Senegal University Cheikh Anta Diop (UCAD) Tajammul Hussain

Study of Surface Reaction and Gas Phase Chemistries in High Density C 4 F 8 /O 2 /Ar and C 4 F 8 /O 2 /Ar/CH 2 F 2 Plasma for Contact Hole Etching

AMBASCIATA D ' I T A L I A OTTAWA SCHOLARSHIPS FOR THE 2011/2012 ACADEMIC YEAR FOR CANADIAN CITIZENS AND FOR ITALIAN CITIZENS RESIDING IN CANADA

THIN FILM DEPOSITION TECHNIQUES STEPS TOWARDS MORE SUSTAINABLE PACKAGES

Introduction to VLSI Fabrication Technologies. Emanuele Baravelli

Graphene Water Dispersion

Transcription:

U R R I U L U M V I T A E PERSONAL INFORMATION Name SILVIA BITTOLO BON Address VIA ANNIZZARO,5 05100 TERNI (TR), ITALY Telephone +39 074449909; +39 3477190848 E-mail silvia.bittolobon@unipg.it ; silvia.bittolo@gmail.com https://www.researchgate.net/profile/silvia_bittolo_bon?ev=hdr_xprf https://www.linkedin.com/profile/view?id=17313873&trk=nav_responsive_tab_profile Nationality Italian Date of birth 14/04/1977 URRENT OUPATION Post Doc SIENTIFI ATIVITY Publications 1. Electrodeposited carbon nanotubes as template for the preparation of semi-transparent conductive thin films by in situ polymerization of methyl methacrylate L. Valentini, S. Bittolo Bon, J. M. Kenny, arbon 45 (007) 685.. Realization of Porous Poly(methyl methacrylate) Films Filled with Electrodeposited arbon Nanotubes, L. Valentini, S. Bittolo Bon, J. M. Kenny, Nanotechnology 19 (008) 95301. 3. Anisotropic Electrical Transport Properties of Aligned arbon Nanotubes/Poly(methyl methacrylate) Films Obtained by Electric Field Assisted Thermal Annealing L. Valentini, S. Bittolo Bon, J. M. Kenny, Macr. Mater. Eng. 93 (008) 867. 4. Plasma Fluorination of hemically Derived Graphene Sheets and Subsequent Modification With Butylamine S. Bittolo Bon, L. Valentini, R. Verdejo, J. L. Garcia Fierro, L. Peponi, M. A. Lopez- Manchado, J. M. Kenny, hem. Mater. 1 (009) 3433. 5. Use of Butylamine Modified Graphene Sheets in Polymer Solar ells L. Valentini, M. ardinali, S. Bittolo Bon, D. Bagnis, R. Verdejo, M. A. Lopez-Manchado, J. M. Kenny, J. Mater. hem. 0 (010) 995. 6. Morphology and Photoelectrical Properties of Solution Processable Butylamine Modified Graphene and Pyrene-Based Organic Semiconductor S. Bittolo Bon, L. Valentini, R. M. Moustafa, F. M. Jradi, B. R. Kaafarani, R. Verdejo, M. A. Lopez-Manchado, J. M. Kenny, J. Phys. hem. 114 (010) 115. 7. Preparation of extended alkylated graphene oxide conducting layers and effect study on the electrical properties of PEDOT:PSS polymer composites S. Bittolo Bon, L. Valentini, J. M. Kenny, hem. Phys. Lett. 494 (010) 64. 8. Electrodeposition of transparent and conducting graphene/carbon nanotube thin films S. Bittolo Bon, L. Valentini, J. M. Kenny, L. Peponi, R. Verdejo, M. A. Lopez-Manchado, Physica Status Solidi A 07 (010) 461. 9. Stimuli-Responsive Polymer Hydrogels ontaining Partially Exfoliated Graphite V. Alzari, A. Mariani, O. Monticelli, L. Valentini, D. Nuvoli, M. Piccinini, S. Scognamillo, S. Bittolo Bon, J. Illescas, J. Polymer Sci. Part A: Polymer hem. 48 (010) 537 10. Transparent and conductive graphene oxide-polyethylenglycol diacrylate coatings obtained by photopolymerization M. Sangermano, S. Marchi, L. Valentini, S. Bittolo Bon, P. Fabbri, Macromolecular Materials and Eng. 96 (011) 401. 11. High oncentration Few-layer Graphene Sheets Obtained by Liquid Phase Exfoliation of Graphite in Ionic Liquid D. Nuvoli, L. Valentini, V. Alzari, S. Scognamillo, S. Bittolo Bon, M. Piccinini, J. Illescas, A. Mariani, J. Mater. hem. 1 (011) 348. 1. Electric Field Assisted Thermal Annealing Reorganization of Graphene Oxide/Polystyrene Latex Films S. Bittolo Bon, L. Valentini, J. M. Kenny, Express Polymer Lett. 5 (011) 819. 13. Wettability and switching of electrical conductivity in UV irradiated graphene oxide films S. Bittolo Bon, Page 1 - urriculum vitae of

M. Piccinini, A. Mariani, J. M. Kenny, L. Valentini, Diamond and Related Materials 0 (011) 871. 14. Processing and functionalization effect in NF/PMMA nanocomposites H. Varela-Rizo, S. Bittolo-Bon, I. Rodriguez-Pastor, L. Valentini, I. Martin-Gullon, omposites: Part A 46 (01) 711. 15. Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate P. Fabbri, E. Bassoli, S. Bittolo Bon, L. Valentini, Polymer 53 (01) 897. 16. Deposition of amino-functionalized polyhedral oligomeric silsesquioxanes on graphene oxide sheets immobilized onto amino-silane modified silicon surface L. Valentini, S. Bittolo Bon, O. Monticelli, J. M. Kenny, J. Mater. hem (01) 613. 17. POSS vapor grafting on graphene oxide film Luca Valentini, Silvia Bittolo Bon, Marta ardinali, Orietta Monticelli, Josè M. Kenny, hem. Phys. Lett. 537 (01) 84. 18. Emerging methods for producing graphene oxide composites in coatings with multifunctional properties L. Valentini, S. Bittolo Bon, J. M. Kenny, J. Mater. hem. (01) 1355. 19. In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures P. Fabbri, L. Valentini, S. Bittolo Bon, D. Foix, L. Pasquali, M. Montecchi, M. Sangermano, Polymer 53 (01) 6039. 0. Plasma etching of polystyrene latex particles for the preparation of graphene oxide nanowalls L. Valentini, S. Bittolo Bon, J. Serbian hem. Soc. 77 (01) 1701. 1. Liquid Droplet Excitation of Freestanding Poly(methylmethacrylate)/Graphene Oxide Films for Mechanical Energy Harvesting L. Valentini, S. Bittolo Bon, J. Kenny, J. Polym. Science Part B: Polymer Physics 51 (013) 108.. Poly(methyl methacrylate)/graphene Oxide Layered Films as Generators for Mechanical Energy Harvesting L. Valentini, S. Bittolo Bon, J. M. Kenny, AS Applied Materials & Interfaces 5 (013) 3770. 3. Multistimuli-responsive hydrogels of poly (-acrylamido--methyl-1-propanesulfonic acid) containing graphene V. Alzari, D. Nuvoli, R. Sanna, L. Peponi, M. Piccinini, S. Bittolo Bon, S. Marceddu, L. Valentini, J. M. Kenny, A. Mariani, olloid and Polymer Science 91 (013) 681. 4. Transfer Writing of Foldable Graphene Nanoplatelet Patterns on Paper Substrates L. Valentini, S. Bittolo Bon, J. M. Kenny, Materials Letters 113 (013) 54. 5. Preparation of transparent and conductive cellulose nanocrystals/graphene nanoplatelets films L. Valentini, S. Bittolo Bon, E. Fortunati, J. M. Kenny, J. Mater. Sci. 49 (014) 1009. 6. Pyroshock testing on graphene based EPDM nanocomposites L. Valentini, A. Bolognini, A. Alvino, S. Bittolo Bon, M. Martin-Gallego, M. A. Lopez-Manchado, omposites Part B 60 (014) 479. 7. Multilayer Films omposed of onductive Poly(3-hydroxybutyrate)/arbon Nanotubes Bionanocomposites and a Photoresponsive onducting Polymer L. Valentini, P. Fabbri, M. Messori, M. degli Esposti, S. Bittolo Bon, J. Polym. Science Part B: Polymer Physics 5 (014) 596. onference Proceedings 1. Luca Valentini, Silvia Bittolo Bon, Josè M. Kenny (013). Pencil Transfer of Graphene Nanoplatelets on Paper Substrates: Example of Foldable Electronics. In: IX ONVEGNO NAZIONALE INSTM SULLA SIENZA E TENOLOGIA DEI MATERIALI. Bari, 30 Giugno-3 Luglio 013. S. Bittolo Bon, L. Valentini, O. Monticelli, J.M. Kenny (01). MODIFIA DI FILM DI GRAFENE OSSIDO TRAMITE DEPOSIZIONE DI SILSESQUIOSSANI POLIEDRII OLIGOMERII. In: G. Dell'Agli, G. Mascolo, M.. Mascolo, M. Pansini. Atti XI onvegno Nazionale AIMAT. p. 49-5, -, ISBN: 9788897930037, Gaeta, 16-19 settembre 01 3. S. Bittolo Bon, L. Valentini, O. Monticelli, J.M. Kenny (01). Self assembly of POSS / graphene oxide hybrid nanomaterials. In: -. 7th International onference on" Nanostructured polymers and nanocomposites". Praga (Republica eca), Aprile 4-7, 01, ISBN: 978808500971 4. Paola Fabbri, Elena Bassoli, Silvia Bittolo Bon, Luca Valentini (01). Preparation and characterization of poly (butylene terephthalate) / graphene composites by in-situ polymerization of cyclic butylene terephthalate. In: VII International onference on Nanostructured Polymers and Nanocpmposites ENP 01. Prague (Z),, 4-7 Aprile 01 5. S. Bittolo Bon, L. Valentini, J.M. Kenny (01). Preparation of alkylated graphene oxide layers for polymer composites. In: -. 5th ENP Young Scientist onference. Praga (Republica eca), Aprile - 4, 01, ISBN: 9788085009705 6. P. Fabbri, E. Bassoli, S. Bittolo Bon, L. Valentini (01). Preparazione e aratterizzazione di ompositi Poli(butilene tereftalato)/grafene da Polimerizzazione in-situ del monomero ciclico. In: G. Dell'Agli, G. Mascolo, M.. Mascolo, M. Pansini. Atti XI onvegno Nazionale AIMAT. p. 1-4, ISBN: 9788897930037, Gaeta, 16-19 settembre 01 7. P. Fabbri, L. Valentini, S. Bittolo Bon, E. Bassoli (011). Sintesi e proprietà di compositi poli(butilene tereftalato)/grafene preparati mediante polimerizzazione del monomero ciclico.. In: AIM XX onvegno Italiano di Scienza e Tecnologia delle Macromolecole. p. 315-318, aim, ISBN: 978889508835, TERNI, 4-8 Settembre 011 Page - urriculum vitae of

8. P. Fabbri, M. Sangermano, L. Valentini, S. Marchi, S. Bittolo Bon (011). Transparent and conductive graphene-polyethylenglycol diacrylate coatings obtained by photopolymerization. In: Functional hybrid nanomaterials, nanocomposites and their applications. Strasbourg, 6-10 Marzo 011 9. L. VALENTINI, S. BITTOLO BON, J. M. KENNY (010). METODI DI FUNZIONALIZZAZIONE DI GRAFENE E GRAFENE-OSSIDO PER APPLIAZIONI IN NANOOMPOSITI IBRIDI POLIMERII. In: -. Atti del 10 onvegno Nazionale AIMAT. apo Vaticano (VV), 5 8 settembre 010, -, ISBN: 9788874581146 10. ARDINALI M., L. VALENTINI, BITTOLO BON S., BAGNIS D., VERDEJO R., LOPEZ-MANHADO M. A, KENNY J. M. (010). Realization of chemically derived graphene sheets/hole-trapping conducting polymer composites for the development of polymer solar cells. In: -. Advanced Hybrid Materials: stakes and concepts. Strasbourg, 7-11/06/010 11. BITTOLO BON S., L. VALENTINI, KENNY J. M., PEPONI L., VERDEJO R., LOPEZ-MANHADO M. A (010). One-step electrophoretic deposition of transparent and conducting graphene-carbon nanotubes composites. In: -. Science and Technology of Nanotubes, Nanowires and Graphene. Strasbourg, 7-11/06/010 1. Bittolo Bon S., ardinali M., Verdejo R., Peponi L., Lopez-Manchado M.A., Valentini L., Kenny J.M. (010). SURFAE MODIFIATION AND DEPOSITION OF LARGE-AREA HEMIALLY MODIFIED GRAPHENE FILMS. In: -. 6th International ENP conference on nanostructured polymers and nanocomposites. Madrid, 8-30/04/010, Madrid:-, ISBN: 978846139816 13. L. VALENTINI, S. BITTOLO BON, M. ARDINALI, R. VERDEJO, M. A. LOPEZ-MANHADO, J. M. KENNY (009). RF Glow Discharge Plasma Treatment of Graphene Sheets: a Possible Route for the Development of Nanostructured Electrodes in Organic Solar ells. In: -. NTomp09. Amburgo, 0-3/09/009, p. 145-146, AMBURGO:karl schulte, ISBN: 978394149080 14. Bittolo Bon S., Puglia D., Valentini L., Kenny J.M. (009). Surface fluorination of graphene and carbon nanotubes in a glow discharge plasma: functionalization routes for polymer nanocomposites. In: VII onvegno Nazionale sulla Scienza e Tecnologia dei Materiali. Tirrenia, 9-1 Giugno 009 15. L. VALENTINI, D. BAGNIS, S. BITTOLO BON, J. M. KENNY (008). Fluidic assembly and patterning of carbon nanotube thin films. In: -. Fourth International Symposium on Nanostructured and Functional Polymer-based materials. Roma, 16-18/04/008 16. S. BITTOLO BON, L. VALENTINI, J. M. KENNY (007). PREPARATION OF FUNTIONAL NANOOMPOSITES BY IN SITU POLYMERIZATION OF METHYL METHARYLATE ONTO ARBON NANOTUBE SHEETS. In: XVIII onvegno Italiano di Scienza e Tecnologia delle Macromolecole. PISA:AIM, atania, 16-0 settembre 007 17. L. VALENTINI, F. MENGONI, S. BITTOLO BON, J. M. KENNY (007). Electrophoretically deposited carbon nanotube thin films: a route to functional nanostructures and their assembled nanocomposites. In: 3rd International Symposium on nanostructured and functional polymer-based materials and nanocomposites. FIRENZE:ENP, orfù, 13-15 Maggio 007 JOB EXPERIENE Dates (from to) Name and type of organization Title of qualification awarded Title of the Project 15/1/013 present University of Perugia Research Fellow haracterization of polyurethanes nanocomposites Dates (from to) 15/1/011 14/1/013 Title of the Project Design and implementation of flexible polymer electrodes with graphene-based nanostructured materials for applications in optoelectronics Dates (from to) 01/07/010 14/1/011 Title of the Project Development and characterization of flexible polymer solar cells Page 3 - urriculum vitae of

Dates (from to) 04/05/009 30/06/010 Name and type of organization Regione Umbria Title of the Project Development and characterization of nanostructured multifunctional hybrid polymer films Dates (from to) 16/1/008 08/04/009 Title of the Project Development and analysis of nanostructured polymers EDUATION AND TRAINING Dates (from to) November 005 December 008 Title of qualification awarded PhD in Materials Nanotechnologies Title of the thesis Processing and haracterization of Poly(methyl methacrylate) Based Nanocomposites for Nanostructured Surfaces Dates (from to) 005 Name and type of organization European Network of Excellence NANOFUN-POLY, INSTM, University of Perugia Title of qualification awarded II Level European Master in Polymeric Materials Nanotechnologies Dates (from to) Name and type of organization Title of qualification awarded October 003 February 004 Provincia di Tern i at I.P.S.I.A. S. Pertini Mechanical and Electrical Design ourse in AutoAD D (duration: 100 hours) Dates (from to) 1996-003 Title of qualification awarded Master Degree in Materials Engineering Title of the thesis "Effect of compatibilizers on the recyclability of PET and its blends" Final mark: 106/110 Dates (from to) 1991-1996 Name and type of organization G.Galilei Scientific High School in Terni Title of qualification awarded High school diploma Final mark: 58/60 PERSONAL SKILLS AND OMPETENES MOTHER TONGUE ITALIAN Page 4 - urriculum vitae of

OTHER LANGUAGES ENGLISH, FRENH Other languages English, French Self-assessment omprehension Oral comunication Written European (*) Oral Written Oral comprehension Oral production English Upper Upper 1 Upper Upper Upper French B B (*)ommon European Framework of Reference for Languages TEHNIAL SKILLS AND OMPETENES Knowledge of softwares: Microsoft Word, Excel and Powerpoint; Origin 7.0, Origin 7.5 and Origin 9.0; AD-D. Knowledge and use of the equipment for the preparation and characterization of materials acquired during the PhD course and during the research activities mainly related to the preparation and characterization of polymer nanocomposites films and materials: Scanning Electron Microscope (SEM) Plasma enhanced chemical vapor deposition Thermal evaporator Differential scanning calorimeter Rheometer Dinamometer Thermogravimetric analisys (TGA) UV-Vis spectrophotometer IR spectrophotometer ontact angle test Joined to the Ordine of Engineers of Terni (No. 1017 Sec. A - sectors a. b. c.) DRIVING LIENE TYPE: B The information contained in this urriculum Vitae et Studiorum are made under the personal responsibility of the undersigned pursuant to art. 46 and 47 of Presidential Decree 445/000, aware of criminal responsibility under Article. Presidential Decree No. 76 of the same, for the cases of falsification of documents and false statements. I authorize the processing of personal data pursuant to Legislative Decree No 30 June 003. 196 and subsequent amendments Page 5 - urriculum vitae of