UNDERSTANDING YOUR WORLD. HANDLING YOUR CHALLENGES. Oil & Gas Partnership built on reliable engines, systems and service. Power. Passion. Partnership.
Contents I A CUSTOMER-ORIENTED TECHNOLOGICAL LEADER 23 Series 1500 24 Series 1600 VI ATEX ZONE 2 3G IIB T3 CERTIFIED MTU P-ENGINES II MTU IN THE WORLD OF OIL & GAS 8 Onshore installations 26 Series 2000 28 Series 4000 VII REDUNDANT CONTROLLER FOR FIRE PUMP DRIVE SYSTEMS (NFPA 20) 10 Offshore installations 30 Emissions Reduction Technology VIII SERIES AND EMISSIONS QUALIFICATION III MTU DIESEL ENGINES 12 Product portfolio at one glance 14 Productivity starts here 16 Series 900 IV MTU SYSTEMS FOR WELL SERVICING, FRAC & DRILLING APPLICATIONS 34 Diesel Engine Power Modules Mobile Rig Power Module FracPack IX X PARTS & SERVICE 54 MTU ValueCare LOCAL SUPPORT. WORLDWIDE. 17 Series 460 18 Series 500 19 Series 60 20 Series 1000 V 38 Diesel Engine Gensets Electric Drilling Package (EDP) MTU SYSTEMS SOLUTIONS FOR MARINE OFFSHORE EXPLORATION & PRODUCTION APPLICATIONS XI 60 Service Network CERTIFIED QUALITY 21 Series 1100 40 Engine Plus 22 Series 1300 42 Offshore Generator Sets Partnership built on reliable engines, systems and service. I Oil & Gas I 3
A customer-oriented technological leader. I MTU supplies its customers with technologicallyadvanced products that are proven in the fi eld. MTU s range of products and services for off-highway applications is extensive and includes both standard and customized solutions. 1 2 3 1 Technological leader As a supplier of high-quality performance drive solutions, MTU stands for the highest level of technological expertise. 2 Passion MTU is passionate about fulfi lling the needs of its customers with the utmost professionalism and precision. 3 Partnership MTU is a reliable and trend-setting partner that acts with foresight in a results-oriented manner. MTU is the core brand of Rolls-Royce Power Systems AG, which is a world-leading provider of high- and medium-speed diesel and gas engines, complete drive systems, distributed energy systems and fuel injection systems for the most demanding requirements. The product range of MTU is one of the widest and most modern in the sector. We offer comprehensive, powerful and reliable engine solutions for yachts, commercial ships and naval vessels, construction and industrial vehicles, agricultural machinery, mining, rail and military vehicles as well as for the oil and gas industry. We also provide a full line of service products to help you maximize uptime and performance. For over 100 years, MTU has been known for cutting-edge innovation and technological leadership. That same spirit of innovation inspires our sustainability efforts. Today and in the future, our focus is on developing and implementing system solutions to maximize efficiency and meet emissions standards. An expert in technology MTU has always set standards in technological expertise for customized product and system solutions. To deliver you maximum power density, we concentrate our innovation on the continuous advancement of our core competencies: fuel injection, turbo charging, exhaust aftertreatment and electronics. A passionate engine specialist We spend every day working together with you, our customers, to deliver engines and systems that best fi t your needs. Whether a standard system or a customized solution we are passionate about the art of engine creation. A reliable partner We understand the specifi c demands for diverse applications. In collaboration with you, we look for the solutions which are best suited to your individual requirements. Every step of the way from the start of project planning, during the design of your integrated system solution, at the point of delivery and commissioning and continuing through the care of your product we are there with you for the entire lifecycle. Partnership built on reliable engines, systems and service. I Oil & Gas I 5
II Power for Oil & Gas Our expertise is our greatest natural resource. For more than 70 years, MTU has been powering the oil and gas industry through engineering leadership and innovation. We supply reliable engines and systems for Oil & Gas operations all over the world, working in tough conditions. Ideal for stationary or mobile operation, drives for pumps or generators, onshore or offshore, MTU engines and systems offer the highest standards in reliability and durability. Whether it s electric power for drilling operations or mechanical drives for pumps and fracturing equipment, consistent reliability and high availability are essential. As the technology leader, our products offer exceptional uptime, fuel economy and time between overhauls, which adds up to low lifecycle costs. Experience in the field Our unique wealth of experience and expertise makes us a partner who can do a lot more than simply build effi cient, compact, durable and powerful engines. We offer complete systems, including standardized and customized package solutions to meet customer specifi cations. Forward thinking MTU has established itself as a leader in environmentally friendly solutions. We re proud to offer a complete lineup of products that meet and exceed worldwide emissions standards. Our mission is to satisfy these standards with the best engineering and design solutions for our customers. For complete emissions qualifi cations details for our Oil & Gas product line, please refer to page 40. A world of support With more than 1,200 service locations worldwide and a full portfolio of MTU ValueCare parts and service products to maximize performance, uptime and productivity you can count on MTU s reliability, expertise and legendary high standards around the world and around the clock. Partnership built on reliable engines, systems and service. I Oil & Gas I 7
Onshore Installations Breaking new ground. Extracting oil and gas presents a number of challenges. Operational conditions are diffi cult and the demands for performance and effi ciency are uncompromising. We bring over 70 years of experience to a variety of oil and gas drilling applications all over the world. MTU offers a complete range of products and services from diesel-electric and dieselhydraulic units to skid-runner and container gensets. Our onshore product range includes diesel engines and systems for: Power units for mechanical and hydraulic drives for rotary tables, draw works, mud pumps and other well services Generator sets for electric drilling rigs for rotary tables, draw works and mud pumps Generator sets for continuous duty and prime power Fracturing units Nitrogen vaporizing/generating units Cement pumps Blenders Coil tubing 8 I Oil & Gas I Partnership built on reliable engines, systems and service.
Offshore Installations When you can t compromise on safety, choose MTU. 1 2 As drilling for new reserves of oil and natural gas onshore becomes more challenging, the search for large reserves is moving offshore. Freeing and processing these fossil fuels requires equipment engineered to meet the unique safety demands of the high seas. MTU provides a broad range of reliable, compact, and lightweight diesel engines and systems that can be customized to meet your specifi c requirements and to provide you with maximum safety! We offer complete solutions from a single supplier. All components are integrated, thoroughly tested and supported. Everything is designed to work together, which prolongs preventive maintenance and overhaul intervals. Decades of experience as an offshore specialist gives us the expertise and fl exibility you need to keep your drilling operation productive and profi table. Our offshore product range includes diesel engines and systems for: Generator sets for emergency, essential, auxiliary and main power Fire pump drivers for mechanical / hydraulic / electric installations Mud pump drivers Wellserve power packs Nitrogen units Cranes Cement pumps Hydraulic power packs 3 MTU Systems Solutions for marine offshore exploration & production applications 1 Modularized Generator Set 2 Modularized Generator Drive 3 Engine Plus System 10 I Oil & Gas I Partnership built on reliable engines, systems and service.
MTU Diesel Engines All engines at a glance. MTU is your global partner offering solutions for all emissions requirements as well as the full power range from 75 2,800 kw (101-3,755 bhp). Our engines set the benchmark for what diesel engines must deliver in oil & gas applications. Their uncompromising operational availability ensures that oil & gas operations run with absolute reliability, while their exceptional effi ciency is a key factor in the economic success of oil & gas operators. III Engine 0 500 1000 1500 2000 2500 3000 Type Page kw kw Series 900 Series 460 Series 500 Series 60 Series 1000 Series 1100 Series 1300 Series 1500 16 17 18 19 20 21 22 23 75 240 kw 101 322 bhp 220 375 kw 295 503 bhp 260 480 kw 349 644 bhp 242 496 kw 325 665 bhp 100 260 kw 134 349 bhp 280 320 kw 375 429 bhp 320 390 kw 429 523 bhp 400 460 kw 536 617 bhp Series 1600 Series 2000 Series 4000 24 26 28 249 736 kw 334 987 bhp 498 1163 kw 668 1560 bhp 1140 2800 kw 1529 3755 bhp bhp 0 500 1000 1500 2000 2500 3000 3500 4000 bhp
MTU Diesel Engines Productivity starts here. MTU engines are ready for just about any challenge. Backed by decades of expertise and experience, we develop optimal solutions that fi t the precise requirements of oil and gas operations. We offer a broad range of specialized engines ideal for meeting the most demanding needs for power. Every engine is designed for high performance combined with maximum availability, safety, environmental friendliness and optimum fuel economy, from explosive atmosphere versions (ATEX) to NFPA-compliant designs. 20V Series 4000 P83 12V Series 4000 T94 Special features (examples): Water-cooled exhaust manifolds and turbochargers Combustion air shut-off fl aps Double-walled injection pipes Dual fuel fi lter arrangement Dual lube oil fi lter arrangement or automatic fi lters Special lube oil sump for increased inclinations Benefits: Reliability Compact, lightweight design that minimizes the deck surface and supporting structures Ease of maintenance Low fuel consumption Emission control in compliance with the latest statutory regulations Comprehensive range of optional engine and system accessories Partnership built on reliable engines, systems and service. I Oil & Gas I 15
Series 900 Diesel engines for mechanical drive Series 460 Diesel engines for mechanical drive Series 900 Engine model 4, 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 75-195 101-261 2200 Medium duty 110-240 147-322 2200 Emissions qualifi cation EU Nonroad Stage IIIA compliant and/or US EPA Nonroad Tier 3 compliant, EU Nonroad Stage IIIB compliant and/or US EPA Nonroad Tier 4i compliant, China offroad certifi cate GB20891-2007/China Tier 2 These engines are also available for vehicle main drive applications (MTU application group 5). Series 460 Engine model 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 220-295 295-396 1800 Medium duty 315-375 422-503 1800 Emissions qualifi cation EU Nonroad Stage IIIA compliant and/or US EPA Nonroad Tier 3 compliant, China onroad certifi cate GB17691-2005/China III and/or China offroad certifi cate GB20891-2007/ China Tier 2, EU Nonroad Stage IIIB compliant and/or US EPA Nonroad Tier 4i compliant, China onroad certifi cate GB17691-2005/China V These engines are also available for vehicle main drive applications (MTU application group 5). 16 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 17
Series 500 Diesel engines for mechanical drive Series 60 Diesel engines for mechanical drive Series 500 Engine model 6, 8 cyl./90 V Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 260-480 349-644 1800 Medium duty 290-480 389-644 1800 Emissions qualifi cation EU Nonroad Stage IIIA compliant and/or US EPA Nonroad Tier 3 compliant, China onroad certifi cate GB17691-2005/China III and/or China offroad certifi cate GB20891-2007/ China Tier 2, EU Nonroad Stage IIIB compliant and/or US EPA Nonroad Tier 4i compliant, China onroad certifi cate GB17691-2005/China V These engines are also available for vehicle main drive applications (MTU application group 5). Series 60 Engine model 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 242-317 325-425 2100/2200 Medium duty 373-410 500-550 2100 Short-time duty 447-496 600-665 2100/2300 Emissions qualifi cation EU Nonroad Stage IIIA compliant and/or US EPA Nonroad Tier 3 compliant, China offroad certifi cate GB20891-2007/China Tier 2, US EPA Nonroad Tier 2 compliant These engines are also available for vehicle main drive applications (MTU application group 5). 18 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 19
Picture 6R Series 1000 Diesel engines for mechanical drive Series 1100 Diesel engines for mechanical drive Series 1000 Engine model 4, 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 100-210 134-282 2200 Medium duty 150-260 201-349 2200 Emissions qualifi cation EU Nonroad Stage IV, US EPA Nonroad Tier 4 fi nal (40 CFR 1039) These engines are also available for vehicle main drive applications (MTU application group 5). Series 1100 Engine model 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 280 375 1700 Medium duty 300-320 402-429 1700 Emissions qualifi cation EU Nonroad Stage IV, US EPA Nonroad Tier 4 fi nal (40 CFR 1039) These engines are also available for vehicle main drive applications (MTU application group 5). 20 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 21
Series 1300 Diesel engines for mechanical drive Series 1500 Diesel engines for mechanical drive Series 1300 Engine model 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 320-340 429-456 1700 Medium duty 360-390 483-523 1700 Emissions qualifi cation EU Nonroad Stage IV, US EPA Nonroad Tier 4 fi nal (40 CFR 1039) These engines are also available for vehicle main drive applications (MTU application group 5). Series 1500 Engine model 6 cyl. In-Line Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 400 536 1700 Medium duty 430-460 577-617 1700 Emissions qualifi cation EU Nonroad Stage IV, US EPA Nonroad Tier 4 fi nal (40 CFR 1039) These engines are also available for vehicle main drive applications (MTU application group 5). 22 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 23
Series 1600 Diesel engines for generator drive and mechanical drive Series 1600 Engine model 6 cyl. In-Line 8, 10, 12 cyl./90 V Application Rated Power Speed Constant speed 50 Hz kw bhp rpm Prime power 249-576 334-772 1500 Constant speed 60 Hz Prime power 284-608 381-815 1800 Variable speed Medium duty 567-736 760-987 1900/2100 Emissions qualifi cation Fuel consumption optimized, Exhaust emission optimized (TA-Luft), EU Nonroad Stage III A, India CPCB (ARAI) Stage I, India CPCB (ARAI) Stage II, NEA Singapore for ORDE, compliant EPA Tier 2, US EPA Nonroad Tier 2 Stationary (40 CFR 60), US EPA Nonroad Tier 3 Stationary (40 CFR 60), US EPA Nonroad Tier 2 compliant, US EPA Nonroad Tier 3 compliant, US EPA Nonroad Tier 4 fi nal (40 CFR 1039), Emission optimized without certifi cate These engines are also available for vehicle main drive applications (MTU application group 5). Partnership built on reliable engines, systems and service. I Oil & Gas I 25
Series 2000 Diesel engines for generator drive and mechanical drive Series 2000 Engine model 12, 16, 18 cyl./90 V Application Rated Power Speed Constant speed 50 Hz kw bhp rpm Continuous power 498-720 668-966 1500 Prime power 575-1000 771-1341 1500 Prime power limited 575-770 771-1033 1500 Constant speed 60 Hz Continuous power 600-800 805-1073 1800 Prime power 695-1010 932-1354 1800 Prime power limited 695-980 932-1314 1800 Variable speed Heavy duty 561-800 752-1073 1800/2100 Medium duty 634-970 850-1301 1800/2100 Short-time duty 675-1120 905-1500 1800/2100 Frac operation 858-1163 1150-1560 2100 Emissions qualifi cation Exhaust emission IMO I, Exhaust emission IMO II, US EPA Nonroad Tier 2 Stationary (40 CFR 60), US EPA Nonroad Tier 4 fi nal (40 CFR 1039), India CPCB (ARAI) Stage I, Fuel consumption optimized, Exhaust emission optimized (TA-Luft), US EPA Nonroad Tier 2 compliant, US EPA Nonroad Tier 4i (40 CFR 1039), Emission optimized without certifi cate Ratings for vehicle main drive applications (MTU Application group 5) are available upon request. Please consult your distributor. Partnership built on reliable engines, systems and service. I Oil & Gas I 27
Series 4000 Diesel engines for generator drive and mechanical drive Series 4000 Engine model 12, 16, 20 cyl./90 V Application Rated Power Speed Constant speed 50 Hz kw bhp rpm Continuous power 1140-2245 1529-3010 1500 Prime power 1205-2600 1616-3487 1500 Prime power limited 1320-2600 1770-3487 1500 Constant speed 60 Hz Continuous power 870-2425 1167-3252 1200/1800 Prime power 1105-2800 1482-3755 1200/1800 Prime power limited 1600-2800 2145-3755 1800 Variable speed Heavy duty 1193-1865 1600-2500 1800-2100 Medium duty 1398-2023 1875-2700 1900 Short-time duty 1740-2320 2330-3110 2000 Frac operation 1678-2461 2250-3300 1900 Emissions qualifi cation Fuel consumption optimized, Exhaust emission IMO I, Exhaust emission IMO II, Exhaust emission optimized (TA- Luft), US EPA Nonroad Tier 1 compliant, US EPA Nonroad Tier 2 compliant, US EPA Nonroad Tier 2 Stationary (40 CFR 60), US EPA Nonroad Tier 4 fi nal (40 CFR 1039), NEA Singapore for ORDE, compliant EPA Tier 2, US EPA Nonroad Tier 4i (40 CFR 1039), Emission optimized without certifi cate Ratings for vehicle main drive applications (MTU Application group 5) are available upon request. Please consult your distributor. Partnership built on reliable engines, systems and service. I Oil & Gas I 29
Emissions Reduction Technology Low emissions. High performance. Aftertreatment Technology below 560kW (750bhp) 5 6 4 MTU has long established itself as a leader in the development of solutions for emissions reduction. This challenge involves key technologies which we carry out in-house. In oil & gas the aim is to collect natural resources while generating profi t. One basic condition for effi cient operations is to comply with emissions regulations. We care for the technology you need. In order to achieve advanced emissions reductions, we have invested our comprehensive expertise in core technologies: fuel injection, turbocharging, cooled exhaust gas recirculation, electronic engine controls for optimizing engine processes and preventing soot formation, as well as external optimization. Advanced emissions regulations like EU Stage IV/EPA Tier 4 final demand further signifi cant reduction in the pollutants emitted. Our engines and systems meet current legislative requirements with proven technologies. We care for the optimal solution for the special demands of each application and power range by choosing the ideal technology. Aftertreatment technology below 560kW (750bhp) Beside our emissions reduction technologies like EGR, common-rail-fuelinjection and charge-air-cooling our engines below 560kW (750bhp) are equipped with SCR aftertreatment technology. Advantages The advantages of SCR in our engines: Low fuel consumption Uncompromising engine availability and operational safety Substantial reduction in nitrogen oxide and greenhouse gas emissions No DPF and no DOC required The perfect interplay of different technologies facilitates optimal results and the most important aim is achieved a de crease in harmful emissions, along with a reduction in fuel consumption. A win-win situation for your earnings and the en vironment. No aftertreatment above 560kw (750bhp) Our engines above 560 kw (750bhp) don t use any exhaust aftertreatment technology. Instead our latest engines are equipped with state of the art EGR technology combined with our core technologies. In combination those technologies enanble engine compliance with the most stringent emission regulations such as EPA Tier 4 fi nal. That means optimum engine characteristics and cost-effi cient operation while meeting emissions standards. Depending on the engine operating point, a certain quantity of exhaust gas is conveyed to the EGR cooler. As it passes through the cooler, the hot exhaust gas is cooled and then mixed with charge air. Mixing the exhaust gas with charge air results in a signifi cant reduction in combustion temperature by comparison with engines that are not using EGR. In return, much lower raw emissions levels of nitrogen oxide are generated inside the engine. The highly effi cient EGR combustion process developed by MTU ensures compliance with EPA Tier 4 fi nal emissions legislation without the need for aftertreatment. Advantages The combination of MTU core technologies like EGR offers many advantages: Low fuel consumption Wide engine performance map full torque curve Exceptionally high torque at low speeds Excellent transient behaviour (load acceptance/speed jumps) Full power output available even at high altitudes Full power output available even at high ambient temperatures No need for exhaust aftertreatment also means no need for additional operating fl uids such as DEF, nor for DPF or DOC, nor for hydrocarbon dosing. Aftertreatment Technology below 560kW (750bhp) example Series 1300 EU Stage IV/EPA Tier 4 fi nal 1 Urea Tank with urea fl uid 2 DEF Urea Supply Unit (pump) pumps liquid urea from the tank to the dosing unit 3 Aftertreatment Control Module (ACM) controls and regulates functions of the aftertreatment system 4 Dosing unit with Urea Nozzle prepares correct urea quantity in relation to untreated engine emissions and provides for optimal spraying of urea/air mixture into exhaust line 5 SCR-Catalyst converts nitrogen oxids in exhaust gas into harmless air components 6 NOx-Sensors measure respective engine emissions in exhaust system We will be available as a partner to help design your optimal SCR system. No Aftertreatment Technology above 560kW (750bhp) 1 2 3 6 1 2 No Aftertreatment Technology above 560kW (750bhp) example Series 4000 EPA Tier 4i 1 Two-stage controlled turbocharging assures low fuel consumption across wide speed range, exceptionally high torque at low speeds, and clean combustion 2 EGR coolers bring about a lowering of the combustion temperature (and subsequently of nitrogen oxides generated in-engine) and are integrated into the hightemperature cooling circuit so that less heat is introduced, which in turn permits lower cooler dimensions 3 EGR rate EGR valve regulates recirculated exhaust gas quantities. EGR rate is optimized for all operating modes 4 Common-Rail-Fuel-Injection* with common rail fuel injection, the combustion process can be optimized to achieve low pollutant levels combined with lower fuel consumption. Fuel is injected into the combustion chamber from a common rail under high pressure. *not displayed in the grafi c below 3 30 I Oil & Gas I Partnership built on reliable engines, systems and service.
IV MTU Systems for well servicing, frac & drilling applications Built-in power and performance. Drilling, frac or well servicing operations have extremely high demands for power, performance and reliability - under the toughest conditions. MTU Systems for the oil and gas industry are the result of decades of expertise from countless successful projects. Our systems and support services are designed to meet your requirements and exceed your expectations. Our wealth of expertise makes us a valuable partner. We are well acquainted with all the conditions, specifi cations and legislation of the oil and gas industry. Right from the start, we ll provide comprehensive support stretching from technical consultation to special assistance with technical documentation. In addition, we can supply complete project management for you, including full execution of engineering, procurement, manufacturing, assembly and commissioning. As your partner, MTU provides the engineering for the entire system, including support throughout the service life of the engines. One source fits all. MTU Systems provide a complete solution engine, components and control systems from one trusted source. Exceptional engineering improves operational reliability and availability, minimizing costs associated with downtime. The compact design and high power-to-weight ratio of our engines provides more power using less space. This reduces the high costs of installation space and supports structures on offshore platforms. Partnership built on reliable engines, systems and service. I Oil & Gas I 33
Diesel Engine Power Modules for well servicing application Long history. Short trip times. Diesel Engine Power Modules New Engine, Same High Standards For more than 70 years, MTU has powered the oil and gas industry through engineering leadership and innovation. All over the world, mobile rigs depend on MTU Series 60 engines to get the job done under tough conditions and strict deadlines. To meet new EPA 2010 standards, MTU offers a new solution the on-highway certified Series 1300. This cutting-edge engine is the product of over four years of development and 5.6 million miles of on-highway testing. As the heart of the new MTU Mobile Rig Power Module, the Series 1300 offers the same legendary high standards of reliability and durability as the Series 60, with improved emissions technology and load performance. Time is Money To maximize revenue, mobile rigs must get to the worksite, service the well and move on to the next job as quickly as possible. Any work stoppage or missed deadline has serious cost implications. Reliable power is critical. The Series 1300 has been engineered to meet the high demands and fast trip times required for mobile well servicing equipment. Running at 1,800 rpm, the six-cylinder engine delivers up to 350 kw (470 hp). A mobile rig engine must have the power and responsiveness to sense a stuck pipe, and to provide additional torque to remove it. To ensure smooth operation, the Series 1300 engine features a fast response to changing load requirements delivering 90% peak torque in 1.5 seconds, 65% faster than the Series 60. At 1,100 rpm, it produces 1,250-1,650 lb.-ft. of torque. And it achieves peak torque at 1,240 rpm, with more than 90% peak torque available at 1,000 rpm. Engineered with new turbocharging technology and electronics, the Series 1300 s quick load pickup response time creates efficiency and maximizes uptime. The wastegated asymmetrical turbocharger with fixed geometry design has fewer moving parts (compared with VGT design) for proven performance. Engineered for Life Fast load pickup response times are just one way the Series 1300 lowers cost of ownership. Backed by a legacy of superior engineering, the Series 1300 offers the longest scheduled maintenance intervals in its class, along with extended time between overhauls (1.2 million mile B50). The three-stage integrated Jacobs engine brake offers quiet engine braking and provides superior braking horsepower for extended brake life. Sturdy rear gear train and ribbed cast iron block minimize noise vibration harshness. And a fully integrated DDEC10 electronic fuel injection and control system protects the engine from damage due to extreme operating conditions. A smart, fuel-efficient design helps you make the most of every gallon. The Series 1300 provides up to five percent better fuel economy, compared to the Series 1300 EPA 2007 engine with comparable engine ratings and load weights. Amplified Common Rail System optimizes each injection event to minimize fuel consumption and allows for easy injector replacement. And to get you back on the job quickly and lower costs, the engine is designed for easy serviceability. Oil, coolant and fuel filters are positioned above the frame rails for easier, faster and cleaner changes. And the crankcase breather features a maintenance-free design. A Cleaner Approach Certified for on-highway (EPA GHG14) standards and designed to exceed Tier 4i off-highway standards, the Series 1300 features proven emissions technology. The Series 1300 engine was a clean-sheet design. Optimal performance, reliability and fuel economy were enhanced through MTU s vast engineering experience and expertise in market-tested technologies like SCR (selective catalytic reduction) with DEF (diesel exhaust fluid) and proven technologies like EGR (exhaust gas recirculation) with DPF (diesel particulate filter). Everything in One Package The MTU Mobile Power Module is a turnkey solution, fully assembled for ease of installation. Everything is designed to work together, which prolongs preventive maintenance and overhaul intervals. The available 1-Box emissions package is fully integrated as one solution, unlike other engine manufacturers. And each module can be customized to your exact requirements. We ll work with you to develop a complete system, tailored to the precise needs of your project. Mobile Rig Power Module Mobile Rig Power Module Application Rated Power Speed Variable speed kw bhp rpm Heavy duty 350 470 1800 Engine with starting system, fuel system, cooling system and power transmission. Based on 6R 1300. Emissions qualifi cation EPA GHG14 On-Highway 34 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 35
Diesel Engine Power Module for frac application High performance. Low weight. Built to frac. MTU FracPack with 12V 4000 T95 High performance. Low weight. The new MTU FracPack is a complete solution built to meet the high demands and tough conditions of the well service industry. While all its components are engineered to work together to ensure optimum performance and maximum uptime, the true strength of the MTU FracPack comes from its powerful Series 4000 engine and lightweight ZF 8 TX transmission. The Series 4000 is the only frac engine that meets Tier 4 standards without aftertreatment. With an increased power output of 2,250 2,600 bhp, the Series 4000 T95 provides more low-end torque improving acceleration and expanding the utilization of the frac pump s performance map. And the lightweight and durable ZF transmission is the perfect complement, providing a wide, full range of gears (speeds) and a maximum input torque of 7,744 lb-ft (10,500 Nm). Working seamlessly together, these key components give the MTU FracPack reliable, outstanding performance even under the toughest fracking conditions. Minimize engineering costs. Thanks to the compact design and simple footprint, the package is easy to integrate in your existing equipment which minimizes your engineering costs. MTU FracPack with 12V 4000 S83 FracPack Diesel Engine Power Module Package Model Engine Type Rated Power Speed Mass, dry Emission qualification kw bhp rpm kg TF12V4000C1 4000 T95R 1680 2250 1900 on request Exhaust emission US EPA Nonroad Tier 4 fi nal (40 CFR 1039) TF12V4000C1 4000 T95 1865 2500 1900 on request Exhaust emission US EPA Nonroad Tier 4 fi nal (40 CFR 1039) TF12V4000C1 4000 T95L 1939 2600 1900 on request Exhaust emission US EPA Nonroad Tier 4 fi nal (40 CFR 1039) PPSVZ12V4000-4000 S83L 1865 2500 1900 7839 Exhaust emission US EPA Nonroad 1A0 Tier 2 compliant 12V engine with ZF 8 TX frac transmission, instrumentation, cradle and package shipping skid. Optional equipment:* Pre-heating system, air compressor, emergency air shut-off fl aps, fuel system, lifting device and back pack. * Available for MTU FracPack with 12V 4000 T95 only. 36 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 37
Diesel Engine Gensets for electric drilling application Everything you need in one package. EDP 60Hz with 12V 4000 G73 All-powerful. And all-in-one. Built to suit the needs of today s drilling operations, the MTU Electric Drilling Package (EDP) delivers high performance, effi ciency and reliability from a single source. The self-contained package integrates diesel engine, generator, radiator and other MTU components seamlessly. The EDP is powered by a MTU Series 4000 engine. It is built to last, with industry-leading technology, common rail injection system and outstanding fuel economy. An engine this powerful needs a sturdy base. The EDP s base frame is built for maximum durability, proven by extensive FEA stress testing. Other MTU components are included in the EDP, from tow bars to fuel system. All are engineered with the latest technology and designed for easy serviceability. To meet your specifi c work needs, several EDP options are also available. Electric Drilling Package (EDP) Electric Drilling Package Application Rated Power Speed Frequeny Emission qualification Prime Power operation kw bhp rpm Hz 4000 G73 1105 1482 1200 60 US EPA Nonroad Tier 2 compliant 4000 G23 1420 1904 1500 50 Fuel consumption optimized/ Exhaust emission optimized (TA-Luft) 12V engine with starting system, fuel system, base frame and generator. EDP 50Hz with 12V 4000 G23 38 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 39
MTU Systems Solutions for marine offshore exploration & production applications Engine Plus: Compact. Complete. Convincing. V Engine Plus systems are available from 498 2,800 kw (668 3,755 bhp) for gendrive and mechanical drive with constant and variable speed. All solutions come from a single source. They are selected and designed to meet your demands for delivering maximum system performance and availability at optimal effi ciency. The pre-installed components on the base frame with optimized connecting points permit an easy system installation. Due to reduced engineering and assembly effort, this tailorized plug-and-play system helps you to save time and money. Decades of engineering expertise and several delivered systems ensure that you will get excellent fi eld-proven quality and performance. Benefits at a glance: Long-term reliability and availability, thanks to perfectly matched components the delivery of the complete solution from a single trusted source the use of only genuine MTU engines and components Optimal power-to-weight ratio for offshore applications Pre-installed system that saves engineering costs Easy to install due to compact dimensions Maximum effi ciency Available for several safety requirements (ATEX, NFPA 20) and classifi cations Basic scope for the Engine Plus System : Engine Series 2000 P02 / 4000 P03 Electric starter 24 VDC Fuel prefi lter with fl exible hoses and ANSI connecting fl ange Manual pump for lube oil extraction Coolant connections with rubber bellows and ANSI fl anges Coolant preheater 400 690 VAC, 50 / 60 Hz Engine Anti-Vibration Mounts (AVM) Baseframe for engine and accessory equipment Epoxy Offshore paint system Optional scope: Air starter Hydraulic starter Electric motor driven lube oil extraction pump Prelubrication pump 400 690 VAC, 50 / 60 Hz Redundant governor acc. to NFPA 20 (power range 498 1,050 kw acc. to Rev. 2007, power range 1,350 2,800 kw acc. to Rev. 2010) ATEX Zone II 3G IIB T3 Classifi cation acc. to DNV, ABS, BV, LRS, GL, RS, CCS 1 5 2 3 4 6 7 8 Illustration using the example of Engine Plus Package with 20V 4000 P03 Illustration using the example of Engine Plus Package with 20V 4000 P03 1 2 3 4 5 6 7 8 ADEC electronic engine controller Lube oil extraction pump Baseframe Coolant preheater Coolant connections Prelubrication pump Fuel connections Fuel prefilter 40 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 41
MTU Systems Solutions for marine offshore exploration & production applications Offshore Generator Sets The ideal generator set package comes from a close partnership and vast expertise. We ll work with you to develop a modularized system. We combine decades of oil and gas industry experience with unmatched engineering expertise to form powerful and complete solutions. Built to meet the demands of the oil and gas industry, these complete systems deliver high performance, effi ciency and reliability in extreme conditions. MTU diesel engines and systems are fully integrated and allow for easy serviceability. Everything is designed to work together, which prolongs preventive maintenance and overhaul intervals. All components, carefully selected from premium manufacturers, are engineered with the latest technology. System assembly takes place on specially equipped production lines. Skilled craftsmanship, continuous monitoring and careful inspections ensure every system meets MTU s high quality standards. And MTU systems solutions can be put to work quickly. Our systems undergo a full factory Acceptance Witness Test with accessories, completed on MTU test beds, to allow for fast and cost-effective installation. 1 3 5 7 20V4000 P83 Details 2 4 6 Turbochargers Dual Fuel Filter Arrangement 1 Exhaust System Exhaust silencers with spark arrestor Exhaust gas cooler 2 Fuel System Fuel Pre-Filters Fuel Tank (SS, CS) 3 Cooling System External mounted radiator cooler Seawater heat exchanger Pre-heater 4 Lube Oil System Special oil sump designed for higher inclinations Prelubrication pump Automatic oil filter 5 Starting System High performance electrical starters Battery skid with breakers Hydraulic starter Air starter 6 Control Panel Project specific control panels PLC Types, Siemens, ABB, Allen Bradley, COMAP 7 Alternator Project specific design IP23-IP56 Water, air cooled LV, MV, HV ADEC AVM Arrangement 42 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 43
ATEX Zone 2 3G IIB T3 certifi ed MTU P-Engines Explosive problem. Integral solution. VI Modifications of MTU P engines for ATEX Zone 2 The combination of three factors makes an explosion possible: Oxygen Fuel / fl ammable substance (gas, vapors, mist, or dust) Energy / ignition source (devices, electrical plants, hot surfaces) The exclusion of one of these three factors means the elimination of the risk. In order to guarantee safety in potentially explosive environments, a modifi cation of factor 3 the engine is the most effi cient solution both technically and economically. MTU engines are designed to minimize or even prevent the risk of high surface temperatures and spark generation. Critical safety factors Oxygen MTU P engines fulfi ll the requirements of ATEX Zone 2 3G IIB T3 according to directive 94 / 9 / EC. This means that they deliver an extremely high standard of safety in conjunction with superior cost effi ciency. Fuel Energy MTU P-engines: Certified Safety according to ATEX Zone 2 3G IIB T3 requirements Photo: Harald Pettersen / Statoil Example of ATEX certificate for 16V 4000 P63 and 16V 4000 P83 engines MTU P-engines need to fulfi ll the requirements for ATEX Zone 2 3G IIB T3 according to directive 94/9/EC. Zone 2: An area in which an explosive mixture of gas is not likely to occur in normal operation and if it occurs it will exist only for a short time Category 3G: Gas (Zone 2) Explosion group IIB: Explosive mixture of Ethylene gas and air T3: Surface temperature < 200 C Equivalent to Class I Division 2 (North America)
SAM Redundant Controller for Fire Pump Drive Systems (NFPA 20) Safety is good. Double safety is better. VII Main ECU Sensors SBX Actuators Series 4000 P03 Backup Additionald components ECU in comparison to the standard scope of supply Sensors EMU Sensors The NFPA-20 standard requires redundant engine controllers on fi repump drive systems in order to prevent interruptions in the fi re-pump water jet during an emergency. MTU is the fi rst manufacturer in the world to offer redundant controllers for engines with common rail injection. In accordance with this standard, the second controller must be installed on the engine and permanently wired. In the event of a fault on the fi rst controller, it must take over the engine control automatically without interrupting the water jet. This measure increases the availability of your fi re pumps and consequently the entire system. The redundant controllers developed by MTU can be used in direct, hydraulic, and diesel-electric drive systems. To redundantly record all engine data required for controlling, a second sensor set is installed on the engine. The ECU7 engine control unit is used as a main and backup controller. Because the injectors and high-pressure fuel control block are not installed redundantly, triggering of these actuators must be switchable between the two controllers: and so the new SBX1 switch box forms the heart of this system. Switching The MTU engine controller offers the option of manual switching, whereby the controller active at any given moment is displayed optically (via LED). The switching process is designed to guarantee the greatest possible redundancy of the system. Optimal use is made of the ECU7 plugs for logic switching and for supplying the new unit. This results in extremely simple wiring. If switching is necessary, drops in speed and excessively high rail pressure must be prevented. The MTU system guarantees that these demands are met for all types of applications (direct, diesel-electric, or diesel-hydraulic pump drive), all engine cylinder variants (12V, 16V, or 20V), and for every engine base speed (1,500 rpm for 4000 P63 or 1,800 rpm for 4000 P83). Benefits: Achieving the NFPA20 (2010) norm for Series 4000 P engines Specifi cally designed for common rail injection Increased availability thanks to redundancy Simple retrofi tting due to plug-and-play All components are developed to work together seamlessly All from one trusted source and in the quality you expect from MTU Main ECU Backup ECU SBX Partnership built on reliable engines, systems and service. I Oil & Gas I 47
MTU Oil and Gas Engines for Onshore Series and emissions qualification. VIII Emissions Series 900 Series 460 Series 500 Series 60 Series 1000 qualification Series 1100 Series 1300 Series 1500 Series 1600 Series 2000 Series 4000 EU Nonroad Stage IIIA EU Nonroad Stage IIIA compliant EU Nonroad Stage IIIB compliant US EPA Nonroad Tier 1 compliant US EPA Nonroad Tier 2 compliant US EPA Nonroad Tier 3 compliant US EPA Nonroad Tier 4i (40 CFR 1039) US EPA Nonroad Tier 4i compliant US EPA Nonroad Tier 2 Stationary (40 CFR 60) US EPA Nonroad Tier 3 Stationary (40 CFR 60) 48 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 49
MTU Oil and Gas Engines for Onshore Series and emissions qualification. Emissions Series 900 Series 460 Series 500 Series 60 Series 1000 qualification Series 1100 Series 1300 Series 1500 Series 1600 Series 2000 Series 4000 US EPA Nonroad Tier 4 fi nal (40 CFR 1039) EU Nonroad Stage IV China onroad certifi cate GB17691-2005/China III China onroad certifi cate GB17691-2005/China V China offroad certifi cate GB20891-2007/China Tier 2 India CPCB (ARAI) Stage I India CPCB (ARAI) Stage II NEA Singapore for ORDE, compliant EPA Tier 2 Emission optimized without certifi cate Fuel consumption optimized Exhaust emission optimized (TA-Luft) 50 I Oil & Gas I Partnership built on reliable engines, systems and service. Partnership built on reliable engines, systems and service. I Oil & Gas I 51
MTU Oil and Gas Engines for Offshore Series and emissions qualification. Emissions Series 2000 Series 4000 qualification US EPA Nonroad Tier 1 compliant US EPA Nonroad Tier 2 compliant Exhaust emission IMO I Exhaust emission IMO II 52 I Oil & Gas I Partnership built on reliable engines, systems and service. Photo: Øyvind Hagen / Statoil
IX MTU ValueCare Your partner in the field. Drilling and well servicing contractors all over the world depend on MTU engines for powerful, reliable performance. That s because they re built to meet the unique demands of your business the long, continuous operating cycles under high loads, extreme climates and challenging topography in some of the world s most remote locations. MTU ValueCare products and services are designed with equal care to optimize your engine s performance while ensuring maximum uptime. 1x Extract the most out of your MTU investment with MTU ValueCare our full portfolio of products and services specifi cally designed to maximize your engine s performance, uptime and productivity. MTU ValueCare includes three product lines: ValueService: Extensive global service and support to help you get the most out of your equipment and protect your investment MTU ValueCare products and services are available worldwide through our extensive network of authorized distributors and service dealers. For more information, please contact your local MTU service center or visit www.mtu-online.com. ValueSpares: A full line of genuine replacement parts and top-quality consumables to keep your MTU engines and systems running optimally ValueExchange: A wide range of genuine remanufactured parts and engines delivering factory-new performance at value-conscious prices Partnership built on reliable engines, systems and service. I Oil & Gas I 55
ValueService Complete maintenance and support. Every MTU engine and system is built to last, with MTU s legendary high engineering standards. But our commitment to quality and uptime doesn t stop there. To ensure a long and productive life for your MTU equipment, count on ValueService our full line of maintenance and repair solutions to help you protect your investment and get the most out of your equipment. Whether it s routine maintenance and repair services from MTU-certifi ed technicians or training and technical documentation, MTU provides everything you need with world-class support customized to your specifi cations. Maintenance, Repair & Overhaul With a wide range of maintenance and repair options, MTU is your true lifecycle partner. Our staff of trained professionals is committed to providing whatever level of support you need throughout the life of your MTU equipment. MTU s expert technicians and factory-approved methods optimize availability and reduce lifecycle costs while helping to avoid unexpected problems. We also offer quick, effi cient repair services to help you get back to work as quickly as possible if unexpected problems do occur. Additional support, including: Annual Check - Optimize your engine s performance and avoid unexpected downtime with professional inspections and maintenance recommendations from MTU. The process includes visual engine inspection, test run and leak check, on-site engine oil and coolant analysis, diagnostic evaluation and reporting. Training - Our training programs are designed to make your service personnel profi cient with MTU engines and systems. MTU training centers provide a hands-on learning experience with engines, sub-assemblies, electronics systems and passionate trainers with invaluable knowledge. Technical Documentation - Comprehensive technical documentation provides complete, clear information on the operation and maintenance of all our engines and systems, tailored to the unique and specifi c needs of each engine or system. Information includes safety requirements, correct fl uids and lubricants, and recommended preventive maintenance schedules. Workshop and Test Bench Solutions - From start to fi nish, only MTU offers a full range of tools and expertise to help you get the most from your workshop and test stand projects. Our services range from consultation to the turnkey handover of operational facilities. Service Units - Integrating workshop, storage and offi ce facilities, MTU Service Units are easily transported and can be set up individually or in combination in virtually any location to maximize service support on site. You get confi dence and peace of mind for any project in one convenient package. 56 I Oil & Gas I Partnership built on reliable engines, systems and service.
ValueSpares and ValueExchange Never compromise. MTU engines are built with legendary high standards. When it s time for replacement parts and consumables, don t settle for anything less. Enhance the life of your engine with ValueSpares and ValueExchange the only new parts, consumables and remanufactured products that live up to MTU standards for craftsmanship, quality and performance. Tested and approved specifi cally for MTU engines and systems, our products are the result of years of intensive research and development. Each product is based on current MTU engine specifi cations, quality audits and progressive modifi cations, making them the best possible match for your engine. To get the most from your equipment, there are no shortcuts. Non-genuine parts and consumables are simply not worth the risk. For maximum reliability, performance and uptime, choose a name you can trust ValueSpares and ValueExchange from MTU. ValueSpares genuine parts Optimize the performance and value of your equipment with ValueSpares parts. Available for modern and classic MTU, Detroit Diesel and Mercedes off-highway engines, we offer everything you need for a turnkey installation, including professional consulting, special tools, rental tools and spare parts kits. For added peace of mind, ValueSpares parts are backed with a full factory warranty. We share your obsession with uptime. So we make sure a wide range of genuine parts are available throughout your MTU engines and systems entire lifecycle which can last for decades. Whatever part you need, wherever you are, we ll get it to you fast through our cutting-edge MTU Parts Logistics Centers and our global network of more than 1,200 service centers worldwide. Ordering ValueSpares genuine parts is easy. All parts are available from one source, which helps reduce complexity and costs in your supply chain. Experienced MTU product experts provide invaluable technical support and troubleshooting to make sure you get exactly what you need. Our team will search our advanced and extensive online parts catalog linked to factories and warehouses with highspeed connections to identify the parts you need and promptly fulfi ll your request. Think of MTU s parts logistics system as one virtual warehouse with three locations and 1,200 access points worldwide through our global distribution network. To maintain consistency and effi ciency on a global scale, every Parts Logistics Center (PLC) location is based on the same operating model, with a state-of-the-art Automated Storage and Retrieval System and a shared Extended Warehouse Management System. Utilizing consistent systems and processes worldwide improves the customer experience and maximizing part availability and visibility. If the nearest Parts Logistics Center is out of a requested material, one of the other facilities can provide support, making the adjustment seamless and transparent. ValueSpares consumables Premium quality ValueSpares fi lters, oils and coolants play a vital role in protecting your investment in MTU engines and systems. Available from a single source, ValueSpares consumables are an essential part of your preventive maintenance program. Superior design and top-quality materials result in maximum power, torque and low operating costs. As a result, ValueSpares consumables increase uptime, reduce maintenance costs and enhance your peace of mind. ValueExchange factory remanufactured products ValueExchange remanufactured parts, engines and systems deliver the same high standards of performance, service life and quality as new MTU products, along with identical warranty coverage at a fraction of the cost. And with design and model-related updates made during the remanufacturing process, they also feature similar technological advancements. Developed by R&D engineers, the ValueExchange remanufacturing process is designed to save you time and money, while benefi ting the environment through the reuse of existing materials. All ValueExchange products are remanufactured by MTU-certifi ed technicians at MTU Reman Centers, according to strict MTU standards. Only MTU can remanufacture MTU products to their original factory specifi cations. To help you work more effi ciently, a wide range of ValueExchange parts, engines and systems are available worldwide from our MTU service network. And for your convenience, swing programs with quick, fi xed turnaround times are also available. Partnership built on reliable engines, systems and service. I Oil & Gas I 59
Service Network Local support. Worldwide. The reliability and performance of your engines and systems are crucial for your success and competitiveness. We are committed to your support. Our convenient global service network provides you this assurance. Whenever and wherever you need expert support, MTU specialists are available. This continuous and long-term care ensures high availability, dependability and effi ciency throughout the lifecycle of your engines and systems. To fi nd your local MTU distributor, visit www.mtu-online.com. X Local support. Worldwide. We ensure that you receive individualized support from our global network of more than 1,200 service centers anywhere, anytime. Global Headquarters Regional Headquarters Sales and Customer Service Center
This is to certify that Maybachplatz 1 88045 Friedrichshafen Germany with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. Scope: Development, production, sales and service of engines, propulsion systems, monitoring and control systems as well as decentralized energy systems. Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard: Certificate registration no. 353331 QM08 Valid from 2014-05-13 Valid until 2017-05-04 Date of certification 2014-05-13 Götz Blechschmidt Managing Director Accredited Body: DQS GmbH, August-Schanz-Straße 21, 60433 Frankfurt am Main 1 / 6 CERTIFICATE Rolls-Royce Power Systems AG Certifi ed Quality Fulfilling demanding requirements. XI ISO 9001 : 2008 DQS GmbH For decades, MTU has held high standards for engineering excellence, ensuring the quality of our products at every stage of their development. Through hard work and dedication, MTU has earned many certifi cations of quality. MTU meets international requirements of ISO 9001:2000 and 14001:2000. Our engines and gensets are certifi ed by all major classifi cation societies such as ABS, DNV, LRS, GL, V, CCS and RS. Nevertheless, there is a lot more to quality than obtaining a certifi cate or meeting an inspection specifi cation. For MTU, the true mark of quality is refl ected in customer satisfaction, confi dence and loyalty. Our customers have high expectations for quality. This inspires us to set high standards for ourselves. This has enabled us to keep innovating, improving and succeeding. With reliable engines and systems trusted by customers all over the world, MTU will continue to power the oil and gas industry well into the future. Partnership built on reliable engines, systems and service. I Oil & Gas I 63
Subject to change. 3061831 Edition 01/15 ENC 2015-03 CM Printed on chlorine-free bleached paper. MTU Friedrichshafen GmbH I MTU Asia Pte Ltd I MTU America Inc. Rolls-Royce Power Systems Companies www.mtu-online.com