NATILUS Smallcut Plate System Retractor Canal Radial Fit Low Contact Locking Options Dynamic Options Dynamic Compression NATİLUS SMALLCUT PLATE SYSTEM Smallcut Locking Plate Smallcut Dynamic Plate Natilus Smallcut plate system is a minimal invasive system. Additionally Natilus Smallcut Plate System is more stable than traditional plate systems. In traditional plate systems the loading is perpendicular to the screws, but in Natilus Smallcut System the loading is less ten 90 degrees. That means less bending force at screws and the plate. So early load bearing is available in Natilus Smallcut Plate system Features Small incision is needed for application More stable than traditional plates MRI compatibility Less bending force on the plate Canals in the ends for skin retractor Radial anatomic fit Site canal - low contact surface combination Site canals for multipurpose use Unique plate tips for easy application Dynamic compression ability Locking screw application in locking plates Dynamic loading in dynamic plates Unique screw tip for self drilling and tapping Percutenous screw application Indications Stabilization of long bones; Femur, tibia, humerus, radius, ulna... Contraindications İnfection Severe osteoporotic bone Metal sensitivity Smallcut Incision Psychiatric conditions that patient can not cooperate. Smallcut means small incision for the application
Specifications 204.0304 to 204.0312 204.0404 to 204.0412 204.0504 to 204.0512 Natilus Smallcut Dynamic Plate 3mm (Stainless Steel) Natilus Smallcut Dynamic Plate 4mm (Stainless Steel) Natilus Smallcut Dynamic Plate 5mm (Stainless Steel) 205.0304 to 205.0312 204.0405 to 205.0412 204.0505 to 205.0512 Natilus Smallcut Locking Plate 3mm (Stainless Steel) Natilus Smallcut Locking Plate 4mm (Stainless Steel) Natilus Smallcut Locking Plate 5mm (Stainless Steel) 206.0306 to 206.0312 206.0406 to 206.0412 206.0506 to 206.0512 Natilus Normalcut Locking Plate 3mm (Stainless Steel) Natilus Normalcut Locking Plate 4mm (Stainless Steel) Natilus Normalcut Locking Plate 5mm (Stainless Steel) 207.0306 to 207.0312 207.0406 to 207.0412 207.0506 to 207.0512 Natilus Normalcut Dynamic Plate 3mm (Stainless Steel) Natilus Normalcut Dynamic Plate 4mm (Stainless Steel) Natilus Normalcut Dynamic Plate 5mm (Stainless Steel) 900.5020 to 900.5070 902.5020 to 902.5070 904.5020 to 904.5070 906.5020 to 906.5070 900.4516 to 900.4570 902.4516 to 902.4570 904.4516 to 904.4570 906.4516 to 906.4570 900.3510 to 900.3550 902.3510 to 902.3550 904.3510 to 904.3550 906.3510 to 906.3550 900.2710 to 900.2740 902.2710 to 902.2740 904.2710 to 904.2740 906.2710 to 906.2740 VS Metric Screw Ø5mm x 20mm to 70mm (SS) VS Metric Locking Screw Ø5mm x 20mm to 70mm (SS) VS Cortical Screw Ø5mm x 20mm to 70mm (SS) VS Cortical Locking Screw Ø5mm x 20mm to 70mm (SS) VS Metrik Screw Ø4.5mm x 16mm to 70mm (SS) VS Metric Locking Screw Ø4.5mm x 16mm to 70mm (SS) VS Cortical Screw Ø4.5mm x 16mm to 70mm (SS) VS Cortical Locking Screw Ø4.5mm x 16mm to 70mm (SS) VS Metrik Screw Ø3.5mm x 10mm to 50mm (SS) VS Metric Locking Screw Ø3.5mm x 10mm to 50mm (SS) VS Cortical Screw Ø3.5mm x 10mm to 50mm (SS) VS Cortical Locking Screw Ø3.5mm x 10mm to 50mm (SS) VS Metrik Screw Ø2.7mm x 10mm to 40mm (SS) VS Metric Locking Screw Ø2.7mm x 10mm to 40mm (SS) VS Cortical Screw Ø2.7mm x 10mm to 40mm (SS) VS Cortical Locking Screw Ø2.7mm x 10mm to 40mm (SS) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
OrtoVia External Fixator System Practically Stable Modularity Smart 3D joint Joint Cancelling Easy Pin Holding Multiaxis Pin Insertion Unique Pin Tip ORTOVIA 3D Lower Extremity Fixator System ORTOVIA 3D Fixator System is a series of modular monolateral external fixator that was developed under many years of clinical experience. Features Modularity Easy application Short surgery time MRI compatability Flexibility - Versatility Stability & safety in corrections Patient s comfort Radiolucent components Short learning curve Fixator Modules: Adult Fixator: Clamp : Metaphysis Clamp, Poly Clamp, Sliding Clamp, Half Sliding Clamp. Joint : 3D Joint, BS Joint Body : L20, L25, L30 Pediatric Fixator: Clamp : Pediatric Metafiz Clamp, Pediatric Sliding Clamp Joint : Pediatric 3D, Pediatric BS Joint Distractor : P15, P20, P25 Indications Short Stature Bone loss Open fractures Comminuted fractures Non-union Angular deformities Limb reconstruction
Specifications ORTOVIA FIXATOR 100.4130 100.4131 100.4132 100.4114 100.4115 100.4116 100.4233 100.4220 100.4221 100.4222 100.4223 100.4240 100.4241 100.4242 100.4243 VIAFIX FIXATOR 101.1000 101.1001 101.1002 101.1010 101.1020 101.1030 101.1040 101.1041 101.1042 101.1043 101.1050 101.1051 101.1052 101.2000 101.2001 101.2002 101.2010 101.2011 ORTOVIA Fixator Body L20 ORTOVIA Fixator Body L25 ORTOVIA Fixator Body L30 ORTOVIA Slindig Clamp ORTOVIA Half Slindig Clamp ORTOVIA Methaphisis Clamp ORTOVIA LS2O ORTOVIA L20 ORTOVIA L25 ORTOVIA L30 ORTOVIA LS ORTOVIA R20 ORTOVIA R25 ORTOVIA R30 ORTOVIA RS VIAFIX Fixator Short Body VIAFIX Fixator Medium Body VIAFIX Fixator Long Body VIAFIX Sliding Clamp VIAFIX Poly Clamp VIAFIX Mono Clamp VIAFIX Fixator Rod 150mm VIAFIX Fixator Rod 200mm VIAFIX Fixator Rod 250mm VIAFIX Fixator Rod 300mm VIAFIX Fixator Ball-Socket Joint VIAFIX Fıxator Hinge-Joint VIAFIX Fixator Connector-joint VIAFIX D Fixator Short VIAFIX D Fixator Medium VIAFIX D Fixator Long VIAFIX DT Fixator VIAFIX D Hip Clamp Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ANT SCREW ANT SCREW SYSTEMS Multifunction Screws Dual Threads Augmentation Hole Anchor Use Cannulated Options Percutaneous Options Unique Tip ANT SCREW SYSTEMS Canulated screw Percutenous solid screws FEATURES: Designed to stabilize bone fragments. Threaded head provides interfragmentary compression. Threaded conical head design minimizes hardware prominence and soft tissue irritation. Ability of soft tissue augmentation by the hole on the head. Ability of wire augmentation via the hole on the head to fix the fragments. Self driling and tapping ability. INDICATIONS: Alignment and stabilization of bone fractures; such as wrist,elbow,foot,ankle,k nee,patella,hip,etc. Nonunions and malunions Ligament reconstruction. Arthrodesis of the foot,ankle,wrist,elbow and hand. Agumentation of fracture fixation by wire or cable via the hole on the head CONTRAINDICATIONS: Active infection Patient conditions including blood supply limitations, Insufficient quantity or of bone Patients with mental or neurologic conditions who are unwilling or incapaple of following postoperative care instructions. Foreign body sensitivity.
Specifications SCREW SIZES: Shaft / thread : lenght 1.6 / 2.5mm: 10-30 mm in 2mm increment in lenght. 2.0 / 3.0mm: 10-30 mm in 2mm increment in lenght. 2.5 / 3.5mm: 20-50 mm in lenght with 2 mm increment and 50-70mm with 5mm increment. 3.5 / 4.5mm: 20-100mm in lenght, 20-50mm with 2mm and 50-100mm with 5mm increment. 4.5 / 6.5mm: 16-120mm in lenght, 16-30mm with 2mm increment and 30-120mm with 5mm. Both canulated and uncanulated screws are avalable. Presented as microant and ANT Screw set: microant Screw set: 1.6 / 2.5mm screws 2.0 / 3.0mm screws 2.5 / 3.5mm screws Both canulated and solid ANT Screw set : 3.5 /4.5mm screws 4.5/6.5mm screws Both canulated and solid ANT Screws and microant Screws 946.4520 to 946.4600 948.4520 to 948.4600 946.6520 to 946.6620 948.6675 to 948.6620 946.6775 to 946.6720 948.6775 to 948.6720 ORTOVIA Ant Solid Screw 20mm to 100mm Ø4.5mm (Ti) ORTOVIA Ant Cannulated Screw 20mm to 100mm Ø4.5mm (Ti) ORTOVIA Ant Solid Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti) ORTOVIA Ant Cannulated Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti) ORTOVIA Ant Solid Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti) ORTOVIA Ant Cannulated Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti) 946.2016 to946.2030 948.2016 to948.2030 946.3016 to946.3030 948.3016 to948.3030 946.3520 to946.3670 948.3520 to948.3670 ORTOVIA microant Solid Screw 16mm to 30mm Ø2.5mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø2.5mm (Ti) ORTOVIA microant Solid Screw 16mm to 30mm Ø3.0mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø3.0mm (Ti) ORTOVIA microant Solid Screw 16mm to 30mm Ø3.5mm (Ti) ORTOVIA microant Cannulated Screw 16mm to 30mm Ø3.5mm (Ti) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA DC Dynamic Screw System Stabilize Your Dynamic Compression Dynamic Compression Locked DC Cannulated Option Headless Design Self Drillingtapping Percutenous Application ACONDA DC SCREW 1. Cannulated 2. Percutanous Stalize your dynamic compression Insufficient quantity or quality of the bone Patients with mental or neurological disability Foreign body sensitivity. Features: Available in cannulated and percutaneous solid screws. Designed to stalize large bone fragments. Threaded sleeve helps interfragmentary compression Threaded sleeve strengthens the screw stabilization Dynamic compression of the fragments Stabilization of dynamic compression Headless design minimizes soft tissue irritation Self drilling and tapping ability Material: Titanium alloy, stainless steel. Indications: Alignment and stabilization of large bone fragments Stabilization of periarticular fractures of large joints Nonunions or malunions of large bone fragments Arthrodesis of large joints; foot, knee, ankle, elbow Contraindications Small bone fragmens Active infection in surgical area Systemic contraindications for the surgery
Specifications Implant Specifications: Consist of 3 parts: 1. Sleeves: Threaded outer surface Diameter: 9.0mm 25mm and 32mm in lenght 2. Lag screws: Cannulated and percutaneous solid obtions Diameter: 6.5mm Lenght: 70,75,80,85,90,95,100,105,110,115,120,125,130 mm 3. Sleeve-stop screw: Fixes lag screw to sleeve ORTOVIA Aconda DC Screw 928.0050 to 928.0130 928.1050 to 928.1130 928.4550 to 928.4600 928.4650 to 928.4700 928.2050 to 928.0130 928.3050 to 928.1130 928.5550 to 928.4600 928.5650 to 928.4700 ORTOVIA Aconda DC Screw Ø6.5mm x50 mm to 130mm (Stainless Steel) ORTOVIA Aconda DC Screw Ø6.5mm x50mm to 130mm (Titanium) ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Stainless Steel) ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Titanium) ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50 mm to 130mm (S. Steel) ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50mm to 130mm (Titanium) ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (S. Steel) ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (Titanium) 928.6030 928.6130 928.6031 928.6131 ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Stainless Steel) ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Titanium) ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Stainless Steel) ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Titanium) Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA Pediatric Modular Hip Plate Modularity Minimaly Invasive Cannulated Lag Screw Adjustable Angle Trochanter Fixation Low Contact Surface ACONDA PEDIATRIC HIP PLATE SYSTEM Smallcut Locking Plate Smallcut Dynamic Plate Aconda Pediatric Hip Plate System fixes proximal femur in children sizes. The system has smallcut locking and dynamic models. Both titanium and stainless steel made models are available Features: Modularity Minimaly invasive Trochanter major fixation Adjustable plate angle Radial fit Unique plate tip Low contact surface Conical and low profile Dynamic and locking obtions Cannulated lag screw obtions Unique Screws with unique tip. Osteopenic bone Nonunions or malunions Contraindicated: İnfection of surgical region Severe osteoporosis and avascular necrosis Psychological conditions that the patient can not tolerate the postoperative regulation Metastatic or malignant disasees of the surgical area İndications: Indicated for fixation of proxiaml femur in children: Fractures of the trochanteric region: Osteotomies of the proximal femur Metastatic fracture of the proximal femur
Specifications ACONDA Pediatric Plate 200.4502 to 200.4506 200.5502 to 200.5506 201.4502 to 201.4506 201.5502 to 201.5506 202.4502 to 202.4506 202.4502 to 202.5506 203.4502 to 203.4506 203.5502 to 203.5506 Dynamic Screw Ø4.0mm 904.4016 to 904.4042 905.4016 to 905.4042 Locking Screw Ø4.5mm 908.4520 to 908.4560 909.4520 to 909.4560 Locking Lag Screw Ø5.0mm ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Titanium) ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Stainless Steel) ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Titanium) VS Cortical Screw Ø4mm x 16mm to 42mm (Stainless Steel) VS Cortical Screw Ø4mm x 16mm to 42mm (Titanium) Ascends 2mm till 42mm VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Stainless Steel) VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Titanium) Ascends 5mm till 60mm 910.5030 to 910.5100 910.5030 to 911.5100 910.5030 to 912.5100 910.5030 to 913.5100 Locking Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel) Locking Lag Screw Ø5.0mm x 30mm to 100mm (Titanium) Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel) Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Titanium) Ascends 5mm till 100mm Specifications: Plate: Angled plate with 100 degrees. Plate bending site Trochanter major fixation canal Low contact surface Anatomic radial fit Unique tip for skin retractor Smallcut or normalcut options Dynamic or locking shaft holes Plate Sizes: 2,3,4,5,6-holes Lenght: 30,35,40.,90,95,100mm 4.5mm Locking Cortical Screw: 4.5mm locking cortical screw with 110 degree Lenght: 20,25,30,.60mm Unique screw tip for self drilling and tapping 4.0mm Cortical Shaft Screw: Locking or dynamic screw Lenght: 16,18,20 42mm Unique screw tip for self drilling and tapping Lag Screw: 5mm locking lag screw 115 degree to long part of the plate Cunnulated option Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
HyperFlex Spinal System HyperFlex Flexible Stability Modularity Polyaxial Screw Monoaxial Screw Hyperflex Screw Cannulated Screw Reduction Screw MONOPOLY SPINAL SYSTEM (Adult Set) The system has modular design: Polyaxial, monoaxial, reduction and cannulated screws are represented as tulip head and screw shafts separately offering wide range of combination. Ergonomic tool design offers safer and shorter operation time. ADVANTAGES: Moduler cups and screw shafts for various combinations Pratical and safe design Easy screw application Double flattened rod for derotation effect Eeasy transverse connector application Easy rod application with practical rod suppressor Practical and safe set screw design and application Low profile screw design Safer for screw pull out Ergonomic and anatomic tool design Failed fusion CONTRAINDICATIONS: Morbid obesity Severe psychiatric diseases Alcoholism and drug addiction Pregnancy Metal sensetivity / allergies Severe osteoporosis INDICATIONS: Posterior stabilization of thoracic and lumbar spine pathologies: Trauma Deformities: scoliosis,kyphosis, Degenerative spine diseases Spondylolisthesis Spinal stenosis Tumor Pseudoarthrosis
Specifications ORTOVIA Hyperflex Spinal System 820.5030 to 820.5045 820.5530 to 820.5545 820.6030 to 820.6060 820.6535 to 820.6560 820.7035 to 820.7065 Hyperflex Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm 807.5030 to 807.5045 807.5530 to 807.5545 807.6030 to 807.6060 807.6535 to 807.6560 807.7035 to 807.7065 Hyperflex Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm 855.5530 to 855.5555 855.6030 to 855.6060 855.6535 to 855.6560 855.7035 to 855.7065 Hyperflex Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm Hyperflex Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm Hyperflex Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm Hyperflex Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm 842.5530 to 842.5555 842.6030 to 842.6060 842.6535 to 842.6560 842.7035 to 842.7065 Hyperflex Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm Hyperflex Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm Hyperflex Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm Hyperflex Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm 810.5030 to 810.5045 810.5530 to 810.5545 810.6030 to 810.6060 810.6535 to 810.6560 810.7035 to 810.7065 Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm 817.5030 to 817.5045 817.5530 to 817.5545 817.6030 to 817.6060 817.6535 to 817.6560 817.7035 to 817.7065 Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
Monopoly Spinal System Monopoly Practically Stable Modularity Polyaxial Screw Monopoly Screw Monopoly Reduction Cannulated Screw Polyaxial Reduction MONOPOLY SPINAL SYSTEM Adult set Pediatric set The system has modular design. Polyaxial, monoaxial and cannulated screws are represented as tulip head and screw shafts separately offering wide range of combination. Ergonomic tool design offers safer and shorter operation time. ADVANTAGES: Moduler cups and screw shafts for various combinations Pratical and safe design Easy screw application Double flattened rod for derotation effect Eeasy transverse connector application Easy rod application with practical rod suppressor Practical and safe set screw design and application Low profile screw design Safer for screw pull out Ergonomic and anatomic tool design The system is used for the following pathologies: Trauma Deformities: scoliosis,kyphosis, Degenerative disc disease Spondylolisthesis Spinal stenosis Tumor Pseudoarthrosis Failed fusion CONTRAINDICATIONS: Morbid obesity Severe psychiatric diseases Alcoholism and drug addiction Pregnancy Metal sensetivity / allergies Severe osteoporosis INDICATIONS: The spinal systems are used for posterior stabilization of thoracic and lumbar spine pathologies.
Specifications ORTOVIA Monopoly Spinal System 800.5030 to 800.5045 800.5530 to 800.5545 800.6030 to 800.6060 800.6535 to 800.6560 800.7035 to 800.7065 Monopoly Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm 805.5030 to 805.5045 805.5530 to 805.5545 805.6030 to 805.6060 805.6535 to 805.6560 805.7035 to 805.7065 Monopoly Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm 830.5530 to 830.5555 830.6030 to 830.6060 830.6535 to 830.6560 830.7035 to 830.7065 Monopoly Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm Monopoly Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm Monopoly Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm Monopoly Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm 840.5530 to 840.5555 840.6030 to 840.6060 840.6535 to 840.6560 840.7035 to 840.7065 Monopoly Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm Monopoly Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm Monopoly Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm Monopoly Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm 810.5030 to 810.5045 810.5530 to 810.5545 810.6030 to 810.6060 810.6535 to 810.6560 810.7035 to 810.7065 Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm 815.5030 to 815.5045 815.5530 to 815.5545 815.6030 to 815.6060 815.6535 to 815.6560 815.7035 to 815.7065 Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm Monopoly Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm Headquarters: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul E- mail: info@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 14, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA Modular Hip Plate System excellent hip solutions Minimaly invasive Anotomic plate Locking Dynamic Cannulated lag screws T.major Fixation Low contact surface ACONDA MODULAR HIP PLATE SYSTEM Smallcut Plate Normalcut Plate Aconda is an anatomic and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut models having locking and dynamic models. The material is MRI friendly stainless steel. Indications Fractures of proximal femur Combined fractures of the proximal femur and ipsilateral shaft fractures Metastatic fracture of the proximal femur Osteotomies of the proximal femur Osteopenic bone Nonunions or malunions Contraindications İnfection of surgical region Severe osteoporosis and avascular necrosis Metal sensitivity Metastatic or malignant disasees of the surgical area Psychological conditions that the patient can not tolerate the postoperative care
Specifications 200 0602 to 200 0608 201 0602 to 201 0608 202 0602 to 200 0608 203 0602 to 200 0608 Aconda Smallcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes) Aconda Smallcut Locking Plate 6mm (S. Steel) (2 to 8 hole) Aconda Normalcut Locking Plate 6mm (S. Steel) (2 to 8 hole) Aconda Normalcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes) 928 0050 to 9280130 929 0050 to 9280130 928 6030 928 6031 Aconda Dynamic Compression Screw ø 6.5mm (S. Steel) (50 to 130mm) Aconda Cannulated Dynamic Comp. Screw ø 6.5mm (S. Steel) (50 to 130mm) Aconda Compression Threaded Sleeve ø 9.0 X 32mm (S. Steel) Aconda Compression Threaded Sleeve ø 9.0 X 25mm (S. Steel) 918 3516 to 918 3560 Aconda Major Screw ø 3.5mm (S. Steel) X 16mm to 60mm 906 5020 to 906 5070 906 5020 to 906 5070 VS Cortical Screw ø 5.0mm (S. Steel) x 20mm to 70mm VS Cortical Locking Screw ø 5.0mm (S. Steel) x 20mm to 70mm 919 1650 919 1750 919 2050 Ortovia Cable ø 1.6mm ( S. Steel) Ortovia Cable ø 1.7mm ( S. Steel) Ortovia Cable ø 2.0mm (S. Steel) Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ORTOVIA Upper Extremity Smart Fixation Dorsal-side fixing radiolucent Joint telescopic Body Slyding clamp Easy lengthening MRI Compatability Fixat Types Wrist Forearm Humerus ORTOVIA Upper Extremity Fixator System is a series of modular monolateral external fixators for upper extremity that was developed under many years of clinical experience. The system is composed of wrist, forearm and humerus fixators. Features Modularity Easy application Short surgery time MRI compatability Flexibility-versatility Stability & safety in corrections Patient s comfort Radiolucent components Short learning curve Indications Bone loss Open fractures Comminuted fractures Non-union Angular deformities Limb reconstruction
Specifications 8680628122357 8680628122371 8680628122388 8680628122401 8680628136439 8680628136477 8680628136507 8680628136514 8680628136521 8680628122999 8680628123002 Ortovia Slyding Clamp Small Ortovia Metaphysis Clamp Small Ortovia Polyclamp Small Ortovia Open Clamp Small Ortovia 3D Joint Small Ortovia Hinge Joint Small Ortovia Fixator Body LS10 Ortovia Fixator Body LS20 Ortovia Fixator Body LS25 Ortovia Wrist Fixator Short Ortovia Wrist Fixator Long 8680628123705 8680628123712 8680628123729 8680628123033 8680628123040 8680628123057 8680628124405 8680628124412 8680628124429 8680628123736 8680628123743 8680628123750 Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X50MM Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X60MM Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø3X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X70MM Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X80MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X50MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X60MM Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø3X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X70MM Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X80MM Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
Ortovia android External Lengthening System Software Control Remote Access Internet Connection Lengthening Shortening Precise Mechatronic Ortovia android Lengthening system designed to be used in lengthening and shortening purpose of the limb is a rigid and precision mechatronic external lengthening system. Ortovia app. is a spetial android-based software that authrized orthopedic surgeon can program and operate the system with remote access via the Internet. On this system Ortovia.app is installed in patient s mobile phone, the doctor by his mobile phone or PC can reach the relevant patient s lengthening system and obtain information about the current situation, and also he can reprogram the lengthening or shortening process. Indications: lengthening and shortening process in long bones Contraindications: In case the patient does not have enough psychological and intellectual abilities to sustain the operation and postoperative treatment. Other known contraindications of limb lengthening process.
Specifications 100.8030 100.8025 100.8020 100.8125 100.8120 100.8225 100.8220 100.8320 100.4110 100.4111 100.4112 100.4113 100.8800 100.8900 Ortovia L30 android fixator Ortovia L25 android fixator Ortovia L20 android fixator Ortovia LS25 android fixator Ortovia LS20 android fixator Ortovia LR25 android fixator Ortovia LR20 android fixator Ortovia LRS20 android fixator ORTOVIA SLYDING CLAMP ORTOVIA SLYDING CLAMP 1/2 ORTOVIA METAPHYSIS CLAMP ORTOVIA POLYCLAMP Electronic Control Unit Ortovia app. Software Headquarter & Sales: Metroport Busidence No :143, E5 Üzeri Kültür Sokak No: 1, 34180 Bahcelievler / Istanbul info@spinamer.com, sales@spinamer.com R&D Department: Yildiz Technical University Davutpasa Campus, Technology Development Zone B2 Block, No: 114, Esenler / Istanbul E-mail: research@spinamer.com Factory: Sanayi Mah. 1715. Sok. No: 32 34538 Esenyurt / Istanbul Tel: +90 212 44 16 444 Fax: +90 212 442 46 34 E-mail: factory@spinamer.com Supported by kosgeb www.kosgev.gov.tr R00 Design 2013 ahmed helmy Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013