MFT Platform Server for Windows Release Notes Version 7.1 2010 Proginet Corporation September 28, 2011
Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE. USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE LICENSE FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME. This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc. TIB, TIBCO, TIBCO Adapter, Predictive Business, Information Bus, The Power of Now, TIBCO ActiveMatrix BusinessWorks, Silver, Managed File Transfer, MFT Command Center, MFT Internet Server, MFT Platform Server, MFT Platform Server Agent, Edge Server, RocketStream, and Slingshot are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries. EJB, Java EE, J2EE, and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only. THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME. THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES. Copyright 2003-2011 TIBCO Software Inc. ALL RIGHTS RESERVED. TIBCO Software Inc. Confidential Information Administrators Guide Version 7.1 TIBCO welcomes your comments on this publication. Please address your comments to: TIBCO Software Inc. 200 Garden City Plaza Garden City, New York 11530 USA Technical Support: +1 (516) 535-3636 Technical Support E-mail: support@tibco.com Web site: http://www.tibco.com When you send information to TIBCO, you grant TIBCO a non-exclusive right to use or distribute the information in any way TIBCO believes appropriate without incurring any obligation to you. Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 2 of 8
Table of Contents I. Introduction... 4 II. Enhancements in MFT Platform Server for Windows 7.1... 4 III. PTFs after MFT Platform Server for Windows 7.0... 5 IV. New fixes available in MFT Platform Server for Windows 7.1... 6 V. Pre-requisites... 7 VI. Support... 8 Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 3 of 8
I. Introduction MFT Platform Server for Windows 7.1 is now generally available. MFT Platform Server enables secure, controlled file-transfer activity on all platforms. With the power of MFT Platform Server, users can transfer critical business files between applications, integrate data from a network of stores or branch locations, or send large files to an offshore data center. MFT Platform Server for Windows 7.1 includes exciting new functionality and resolves outstanding issues from the previous version of Platform Server for Windows. TIBCO continues to stay ahead of the competition by adding the most advanced technology to MFT Platform Server. II. Enhancements in MFT Platform Server for Windows 7.1 1. Distribution List (One to Many) Users have the ability to send a file to multiple locations from a single transfer. This enhancement allows users to send files in a distribution list format such as a pricing update file to all retail stores. 2. Added a message to the cfapplkey scripts The applykey scripts now contain a message to tell the user to recycle MFT after installing the key. 3. Added Responder Profile support to Command Center Functions (Node, Profile, RProfile) A Command Center user can now connect to Platform Server with a responder profile, and have the ability to manage the Platform Server or collect logs from the Platform Server. 4. Added new tokens Assuming that a file is called a.b.c, the tokens will resolve in the following way: $(NoLocalFileBase) b.c $(NoLocalFileExt) a.b $(NoRemoteFileBase) b.c $(NoRemoteFileExt) a.b 5. Files name tokens are now available on the local file name for a send Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 4 of 8
6. Added Perl DNI script This enhancement allows users to detect the existence of a file within a directory, and transfer each file in the directory to a target system. Perl DNI is in addition to the standard DNI functionality within MFT Platform Server. Perl DNI: Allows users to use regular Expressions to filter files to be transferred Allows users to limit the days/times that files are scanned to be transferred 7. Microsoft System Center Configuration Manager (SCCM) Support MFT Platform Server for Windows can be silently installed using MS SCCM. 8. File transfer throttle default values The new file transfer throttle values are 50 Initiators and 50 Responders totaling 100. If a file transfer is limited on the initiator side, only one message will be written for all transfers going to the event viewer. All other transfers will not be attempted until the next dispatcher cycle. 9. Added Extended ASCII support to MFT Platform Server conversion tables MFT Platform Server now provides four conversion tables that can be selected for greater flexibility and support for extended ASCII character sets: Comtblg.classic - The old comtblg.dat shipped with prior versions. This table provides compatibility with versions prior to v7.1 and does not contain extended ASCII characters Comtblg.cp037 - Extended ASCII table that is based on IBM Code page 037. This table supports the Latin-1 character set as used in IBM mainframes. Comtblg.cp1047 - Extended ASCII table that is based on IBM Code page 1047. This table supports the ISO8859-1 character set. Comtblg.dat - Extended ASCII table that is based on IBM Code page 037. This table supports the Latin-1 character set as used in IBM mainframes. This table is identical to the Comtblg.cp037 table. III. PTFs after MFT Platform Server for Windows 7.0 CW01820 o Fixes a problem where all sub-directories are not transferred and minidumps may be created when using the $(SDIR) token on DNI receives. Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 5 of 8
CW01835 CW01853 o Fixes a problem when after modifying the file name in a template the updates are not saved until the server is refreshed. Template changes are now saved without requiring a refresh. o Fixes a problem where the Administrator GUI may crash if the MFT Platform Server Administrator Auto Refresh Rate is less than 10 seconds. o Fixes a problem where log and event Viewer records were written for all incoming connections including keep alive requests from a load balancer. MFT will log requests if data is sent on the connection. If the connection is just opened and closed then nothing is logged. o Added the ability to generate SSL certificate requests with key lengths of 1024, 2048 and 4096 bits o Added the -v option to sslutility.exe to display version information o Resolves an issue when using the Platform Server Command Line Client to perform Platform Server transfers via the MFT Internet Server, Platform Server Initiator Transaction IDs did not increase after performing multiple transfers. o Resolves an issue in MFT Internet Server, when a transfer definition was defined using both a UNC path, and a Platform Server as the file destination, a 'cfdir' error caused the transfer to fail. o Resolves issues with load balancer heartbeat requests causing the Platform Server to hang unexpectedly. o Platform Server PPA token %TIME only resolved one digit for any second under 10 seconds. The token now resolves two digits, for example 9 seconds is now resolved as "09". IV. New fixes available in MFT Platform Server for Windows 7.1 Resolved a problem where GetComputerName was not resolving properly in a Windows Cluster Environment. Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 6 of 8
Fixed an issue where file transfer with $(LocalPathWODrive) was not resolving to the full path. Fixed an issue where a DNI receive using a local user account fails and CPU utilization spikes. Resolved an issue with scheduled file transfers file tokens reverting to static values after reboot. Resolved an issue where scheduled DNI transfers disappear after MFT is restarted. Resolved an issue with the cfrprofile command not checking if a node already exists. Resolved issue of a zero byte file being created on the Windows server when a transfer fails. Updated the error message when a directory transfer has no files to upload or download. Fixed notification emails not displaying correctly in Outlook preview when using Exchange 2010. Resolved an issue where the two week period prior to license key expiration was resulting in Batch DNI templates failing. V. Pre-requisites A. Minimum Operating System Version MFT Platform Server for Windows is supported on the following minimum operating system levels or above: Windows XP SP3 Windows Vista SP1 Windows 2008 and 2008 R2 Windows 7 MFT Platform Server for Windows is a 32-bit application which is fully supported on 64-bit Windows operating systems. Windows XP Service Pack 2, Windows 2000 Server and Professional, and Windows 2003 Server R2 reached end of support in July, 2010. Customers should migrate to supported versions of Windows Client and Windows Server because in the event that you encounter an issue/outage in your environment on an unsupported product, Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 7 of 8
Microsoft engineers may not be able to help resolve the issue until you've upgraded to a supported level. B. Minimum Hardware 1 GB of memory 100 MB of disk space An appropriate amount of additional local storage is recommended for file transfer data An x86 architecture based processor is required to run MFT Platform Server for Windows and RocketStream file transfer acceleration C. Sizing Guidelines In addition to the above minimum requirements: For up to 100 concurrent transfers, two or more processor cores at 2.5 GHz or faster For up to 200 concurrent transfers, four or more processor cores at 2.5 GHz or faster For more than 200 concurrent transfers, eight or more processor cores at 2.5 GHz or faster One additional processor core at 2.5 GHz or better for extensive use of encryption or compression When performing over 100 concurrent transfers, TIBCO recommends using the transfer throttling feature TIBCO recommends a maximum of 50 DNI templates per server Please contact MFTSalesEnablementTeam@tibco.com for assistance with the above guidelines or any special requirements. VI. Support For technical questions regarding installation or configuration of MFT Platform Server for Windows 7.1, please contact: TIBCO Support https://support.tibco.com North and South America: +1 (650) 846-5724 Europe, Middle East, and Africa: +44(0) 870.909.3893 Asia and Australia: +61.2.4379.9318 Copyright 1995-2011 TIBCO Software Inc. All Rights Reserved. Page 8 of 8